Owner's Manual
! WARNING !
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
40-0069
PATENT NO. 6,387,014 B2
CAUTION:
MADE IN CHINA
Weight on this product should not exceed 250 lbs.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
2013, 06
2013 Stamina Products, Inc.
CALL US FIRST
THANK YOU FOR PURCHASING THE
Space Mate Folding Stepper
To help you get started, we have pre-assembled most of your
Space Mate Folding Stepper at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
Within a few minutes you will be getting your body into shape and on your
way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Friday, 8:00 A.M. - 5:00 P.M., Central Time.
3
BEFORE YOU BEGIN
Although Stamina tries to manufacture its products
with the finest materials and uses the highest
standards of manufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call 1 (800) 375-7520 (in the U.S.) between 8:00A.M.
and 5:00 P.M. Central Time, Monday through Friday.
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.
Thank you for choosing the Space Mate Folding
Stepper. We take great pride in producing this
quality product and hope it will provide many hours
of quality exercise to make you feel better, look better
and enjoy life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The Space Mate
Folding Stepper provides a convenient and simple
method to begin your assault on getting your body in
shape and achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the Space
Mate Folding Stepper.
Handlebar
Meter
Locking Knob
Upright
Shock
Shock
Support Frame
Right Pedal Arm
Stand Cap
Pedal Caps
Endcap
T Knob
Base Frame
Adjustment Bracket
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Phillips Screwdriver
Rubber Mallet
4
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit,
open the hardware bag and make sure that you have the following items:
3/16"
1/2
1/4"
1
5/16"
3/8"
1/2
1/2"
INCHES
0
0
1/2
2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
MILLIMETERS
6
8
10
12
Place washers, the end of bolts or screws on the
circles to check for the correct size. Use the small
scale to check the sizes of bolts and screws.
Part No. and Description
Qty
33
35
Screw, Round Head (M5 x 0.8 x 15mm)
Bolt, Round Head (M6 x 1 x 20mm)
2
1
NOTE: Some of the hardware items listed may be attached to other parts.
5
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
A
C
B
STEP 1
Lay the STEPPER on the floor as shown in the illustration A. Attach the BASE STAND(26) onto the
BASE FRAME(1) with ROUND HEAD BOLT(M6 x 20mm)(35).
STEP 2
Turn the STEPPER to other side as shown in illustration B. Press the ENDCAPS(29) onto bother sides of
the BASE FRAME(1). Refer to illustration B and make sure the Key Rib in the STAND CAPS(28) align
with the slot in the Stabilizer of the UPRIGHT(2). Then press the STAND CAPS(28) onto both sides of
the UPRIGHT(2).
STEP 3
Refer to illustration C. Raise the STEPPER to an upright position and unfold the STEPPER by lifting the
HANDLEBAR(4). Lock the HANDLEBAR(4) to the UPRIGHT(2) with the LOCKING KNOB(18) and
insert the LOCKING PIN(19) through the Bracket on the HANDLEBAR(4) and the UPRIGHT(2).
WARNING:
When folding and unfolding the Space Mate Folding Stepper, keep all children away from
the Space Mate Folding Stepper and make sure your hands are clear of any folding or
pinch point.
6
ASSEMBLY INSTRUCTIONS
Make sure the SENSOR WIRE(23)
is located at the front of the
HANDLEBAR(4).
STEP 4
For easier installation of the FOAM GRIPS(20), lubricate the HANDLEBAR(4) with a small amount of
liquid soap. Slide the FOAM GRIPS(20) onto the HANDLEBAR(4).
STEP 5
Attach the MOUNTING BRACKET(21) onto the HANDLEBAR(4) with ROUND HEAD SCREWS
(M5 x 15mm)(33).
STEP 6
Install an "AA" battery into the METER(22), one battery included. See page 8 for detailed battery installation
instructions. Slide the METER(22) onto the MOUNTING BRACKET(21). Make sure the SENSOR
WIRE(23) is located at the front of the HANDLEBAR(4), then plug the SENSOR WIRE(23) into the
METER(22).
7
USING THE ELECTRONIC METER
Pedal movement or push any button.
POWER ON :
POWER OFF :
Automatic shut off after 4 minutes of
inactivity.
FUNCTION BUTTONS:
Push to select the function of the lower
MODE :
readout.
RESET : To reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with
change every 6 seconds.
COUNT: Upper readout displays the total number of strides you have taken, from zero to 9999
strides.
Displays the riding time, from 1 sec up to 99:59 minutes.
TIME:
STRIDES/MIN: Displays the rate of strides per minute.
CALORIE: Displays the calorie consumption, from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
AA Battery
How to Install and Replace Battery:
1. Open the Battery Door on the back of the meter.
2. The meter operates with an AA battery. Refer to the illustration to
install or replace the battery.
Note:
1. Rechargeable batteries are not recommended.
8
OPERATIONAL INSTRUCTIONS
ADJUSTING RESISTANCE
The resistance of the shocks can be adjusted by sliding
the SHOCK ADJUSTMENTS in the slot on the PEDAL
ARMS(5, 6). Position the SHOCK ADJUSTMENTS
at the front end of the slot to provide the lowest resistance
and the fastest workout pace. Position the SHOCK
ADJUSTMENTS at the back end of the slot to provide
the highest resistance and the slowest workout pace.
SHOCK
ADJUSTMENT
CAUTION:
1. The shocks get HOT after a few minutes of use.
2. Tighten the T KNOBS securely before using the Space
Mate Folding Stepper
MAINTENANCE
The safety and integrity designed into the Space Mate Folding Stepper can only be maintained when
the Space Mate Folding Stepper is regularly examined for damage and wear. Special attention should
be given to the following:
1. Verify that the Shocks provide resistance.
2. Shocks on steppers get HOT during use. To avoid burns, do not touch the shocks until they have time to
cool.
3. Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
5. Worn or damaged components shall be replaced immediately or the Space Mate Folding Stepper
removed from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the Space Mate Folding
Stepper.
7. Keep your Space Mate Folding Stepper clean by wiping with an absorbent cloth after use.
9
STORAGE
The Space Mate Folding Stepper is designed to fold
for easy storage. You can store your Space Mate
Folding Stepper as illustrated after your workout. Please
follow the following process:
1.
STEP 1
Slide the SHOCK ADJUSTMENTS to the back end of
the slots on the PEDAL ARMS(5, 6). Loosen the
LOCKING KNOB(18) on the HANDLEBAR(4).
Remove the LOCKING PIN(19) on the HANDLEBAR
(4). Refer to illustration 1.
SHOCK
ADJUSTMENT
2.
STEP 2
Swing the HANDLEBAR(4) down to the front side to fold
the STEPPER. Refer to illustration 2.
STEP 3
Illustration 3 shows the Space Mate Folding Stepper
after folding. Store the LOCKING PIN(19) into the hole
in the UPRIGHT(2).
3.
WARNING: When folding and unfolding the Space
Mate Folding Stepper, keep all children
away from the Space Mate Folding
Stepper and make sure your hands are
clear of any folding or pinch point.
10
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years, or are severely overweight, you must start slowly and increase your time on the Space Mate
Folding Stepper gradually: a few minutes per workout.
Initially, you may be able to exercise only for a few minutes in your target zone, however, your aerobic
fitness will improve over the next six to eight weeks. Don't be discouraged if it takes longer. It's important to
work at your own pace. Ultimately, you'll be able to exercise continuously for 30 minutes. The better your
aerobic fitness, the harder you will have to work to stay in your target zone. Please remember these
essentials:
Have your doctor review your training and diet programs to advise you of a workout routine you
should adopt.
Begin your training program slowly with realistic goals that have been set by you and your doctor.
Monitor your pulse frequently. Establish your target heart rate base on your age and condition.
Set up your Space Mate Folding Stepper on a flat, even surface at least 3 feet from walls and
furniture.
EXERCISE INTENSITY
To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper
intensity level can be found by using your heart rate as a guide. For effective aerobic exercise, your heart
rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise.
This is known as your target zone. You can find your target zone in the table below. Target zones are listed
for both unconditioned and conditioned persons according to age.
During the first few months of your exercise program, keep your
heart rate near the low end of your target zone as you exercise.
After a few months, your heart rate can be increased gradually
until it is near the middle of your target zone as you exercise.
To measure your heart rate manually,
stop exercising but continue moving
your legs or walking around and place
two fingers on your wrist. Take a
six-second heartbeat count and
multiply the results by 10 to find your
heart rate. For example, if your
six-second heartbeat count is 14,
your heart rate is 140 beats per minute. (A six-second count is
used because your heart rate will drop rapidly when you stop
exercising.) Adjust the intensity of your exercise until your heart
rate is at the proper level.
11
WARM-UP and COOL-DOWN
Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump
rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.
Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to the
left leg. Do this stretch
several times slowly.
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to
return to the heart. Your cool-down should include the stretches listed above and should be completed after
each strength-training session.
12
LIMITED WARRANTY
MODEL 40-0069
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and one year on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household
purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this
limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of
establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
13
PRODUCT PARTS DRAWING
FRONT
BACK
14
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Base Frame
Upright
1
1
1
1
1
1
4
2
2
2
2
2
2
2
2
2
4
1
1
2
1
1
1
1
2
1
1
2
2
2
2
4
2
8
3
Support Frame
Handlebar
Left Pedal Arm
Right Pedal Arm
Pedal Bushing
Securing Cap
Adjustment Bracket
Adjustment Slide
T Knob
Plastic Washer (M8)
Pedal Cap
Pedal Bumper
Shock
Sleeve
Upright Bushing
Locking Knob
Locking Pin
Foam Grip
Mounting Bracket
Meter
Sensor Wire
Magnet
Grommet Plug
Base Stand
Wheel
Stand Cap
Endcap
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
Round Plug (25mm)
Nut Cap
Screw, Round Head (M3 x 15mm)
Screw, Round Head (M5 x 0.8 x 15mm)
Bolt, Round Head (M6 x 1 x 16mm)
Bolt, Round Head (M6 x 1 x 20mm)
Bolt, Round Head /w nylock (M6 x 1 x 20mm) 4
Bolt, Socket Head (M8 x 1.25 x 16mm)
Bolt, Hex Head (M8 x 1.25 x 20mm)
Bolt, Hex Head (M8 x 1.25 x 42mm)
Bolt, Hex Head (M8 x 1.25 x 46mm)
Bolt, Hex Head (M10 x 1.5 x 82mm)
Bolt, Hex Head (M10 x 1.5 x 86mm)
Spring Washer (M8)
Washer (M8 x ø23mm x 2mm thick)
Washer (M8 x ø19mm x 1.5mm thick)
Washer (M10)
2
2
2
1
2
2
4
2
8
8
3
4
1
1
1
Nylock Nut (M8 x 1.25)
Nylock Nut (M10 x 1.5)
Nut (M10 x 1.5)
Warning Label
Manual
15
NOTES
16
NOTES
17
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina has a Customer Service Department with
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520
(in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet
ordering form below and fax it to (417) 889-8064. Our Customer Service Department will be able to assist
you with your problem and the part will be mailed directly to your house.
MAIL
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
CUSTOMER SERVICE
Fax: (417) 889-8064
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT: We must have your phone number in order to process the order!
Work Phone #: (
Phone #: (
)
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
|