Sony VCR HKSR 5803HQ User Manual

RGB SQ PROCESSOR BOARD  
HKSR-5803SQ  
ADVANCED HQ PROCESSOR BOARD  
HKSR-5803HQ  
INSTALLATION MANUAL  
1st Edition  
 
Section 1  
Installation  
1-2. Installation Overview  
Purpose of this manual  
This manual is an installation manual of RGB SQ Proces-  
sor Board HKSR-5803SQ and Advanced HQ Processor  
Board HKSR-5803HQ.  
This manual is intended for system and service engineers,  
so describes information regarding installation.  
Components  
HKSR-5803SQ is composed of the following items:  
. SQ-20 Board  
. Hexagonal support 7 mm (4 pcs)  
. PSW2.6 x 5.8 (8 pcs)  
. Installation manual  
Related manual  
Besides this installation manual, the following manual is  
available for HKSR-5803SQ and HKSR-5803HQ.  
. Maintenance Manual (available on request)  
This manual describes the information for the mainte-  
nance of this unit and the information that premises the  
parts level service.  
HKSR-5803HQ is composed of the following items:  
. DLP-27 Board  
. Hexagonal support 7 mm (4 pcs)  
. PSW2.6 x 5.8 (8 pcs)  
. Installation manual  
If this information is required, please contact your local  
Sony Sales Office/Service Center.  
Applicable models  
SRW-5800  
1-1. Specifications  
Installations of HKSR-5803SQ or HKSR-5803HQ  
The HKSR-5803SQ comprises the SQ-20 board.  
Mount the SQ-20 board on the HPR-22 board.  
General  
HKSR-5803SQ  
Dimensions (w/h)  
The HKSR-5803HQ comprises the DLP-27 board.  
Mount the DLP-27 board on the HPR-22 board.  
SQ-20 Board: 155 x 90 mm  
Mass  
SQ-20 Board: approx. 70 g  
Power requirements +3.3 V dc: 840 mA  
Attach and adjust the HKSR-5803SQ or HKSR-5803HQ  
properly, following the procedures in Section 1-3 and later.  
+1.5 V dc: 1800 mA  
Power consumption  
approx. 5.5 W  
HKSR-5803HQ  
Dimensions (w/h)  
DLP-27 Board: 155 x 90 mm  
Mass  
DLP-27 Board: approx. 70 g  
Power requirements +3.3 V dc  
+1.5 V dc:  
850 mA  
1800 mA  
Power consumption  
approx. 5.5 W  
HKSR-5803SQ/5803HQ  
1-1 (E)  
 
1-3. Installation Procedure  
4. Fully loosen the two fixing screws, and then remove  
the upper lid (rear) assembly in the arrow direction.  
1. Turn off the power of the VTR.  
2. Fully loosen the two fixing screws, and then slide the  
two knobs on the upper lid (front) assembly each to the  
inside. (Move the knobs to the outside to fix the upper  
lid (front) assembly.)  
3. Remove the upper lid (front) assembly in the arrow  
direction.  
Fixing screw  
Fixing screw  
Upper lid (rear)  
assembly  
Protrusion  
Square hole  
Knob  
Upper lid (front) assembly  
Knob  
Fixing screw  
5. Raise the eject levers of the HPR-22 board in the  
arrow direction, and then pull out the board slowly  
upward.  
Eject lever  
HPR-22 board  
Eject lever  
Removal  
Installation  
HKSR-5803SQ/5803HQ  
1-2 (E)  
 
6. Remove the six screws to detach the shield plate from  
the HPR-22 board.  
9. Reattach the shield plate to the HIF-22 board with six  
screws.  
Shield plate  
Shield plate  
PSW  
2.6 x 6  
PSW  
2.6 x 6  
PSW  
2.6 x 6  
PSW  
2.6 x 6  
PSW2.6 x 6  
PSW2.6 x 6  
HPR-22 board  
HPR-22 board  
7. Attach four 7 mm hexagonal supports (accessory) to  
the HPR-22 board with four screws (accessory).  
8. Connect the SQ-20 board or DLP-27 board to the  
HPR-22 board and secure it with four screws (accesso-  
ry).  
PSW2.6 x 5.8  
(Supplied accessory)  
HPR-22 board  
Hexagonal  
supports (7 mm)  
(Supplied  
PSW2.6 x 5.8  
(Supplied  
accessory)  
accessory)  
PSW2.6 x 5.8  
(Supplied  
accessory)  
Hexagonal  
supports (7 mm)  
(Supplied  
PSW2.6 x 5.8  
(Supplied  
accessory)  
accessory)  
SQ-20 board  
or  
DLP-27 board  
HKSR-5803SQ/5803HQ  
1-3 (E)  
 
10. Securely insert the HPR-22 board into the “HPR” slot  
to tightly connect the board to the connector on the  
motherboard, while pressing down the two eject  
levers.  
1-4. Confirming Identification of  
Optional Board  
Confirmation Procedure  
Eject lever  
1. On the HOME menu, press the DIAG button while  
pressing the [SFT] (shift) key.  
The MAINTENANCE INFORMATION menu  
appears.  
HPR-22 board  
Eject lever  
ROM  
VER  
MAINTENANCE INFORMATION DISPLAY  
F1  
F2  
F3  
OPERATION  
1105HOURS[  
238HOURS[  
153HOURS[  
4048TIMES[  
1105H]  
238H]  
153H]  
4048T]  
ERR  
LOG  
DRUM RUNNING  
TAPE HOURS  
THREADING  
F4  
OPTION  
INF  
MAINTE  
EXEC  
EXIT  
DIAG  
ALT  
F5  
F6  
F7  
F8  
F9 F10  
2. Press [F5] (OPTION INF).  
The OPTION INFORMATION menu appears.  
OPTION INFO  
SS  
F1  
OPTION BOARD INFORMATION  
APR  
HKSR-5001 Board ––––––––  
F2  
HKSR-5802 Board ––––––––  
FC  
HKSR-5803 Board INSTALLED (SQ)  
F3  
F4  
DVP  
HIF  
MY  
FUNC  
INFO  
EXIT  
DIAG  
HPR  
HPR-22 board  
EQ  
ALT  
F5  
F6  
F7  
F8  
F9 F10  
<Top view>  
3. Check that “INSTALLED (SQ)” (HKSR-5803SQ) or  
“INSTALLED (HQ)” (HKSR-5803HQ) is displayed  
for the HKSR-5803 board.  
n
For more information on the maintenance mode, refer to  
Section 3 of the VTR Maintenance Manual Volume 1.  
HKSR-5803SQ/5803HQ  
1-4 (E)  
 
The material contained in this manual consists of  
information that is the property of Sony Corporation.  
Sony Corporation expressly prohibits the duplication of  
any portion of this manual or the use thereof for any  
purpose other than the operation or maintenance of the  
equipment described in this manual without the express  
written permission of Sony Corporation.  
Le matériel contenu dans ce manuel consiste en  
informations qui sont la propriété de Sony Corporation.  
Sony Corporation interdit formellement la copie de  
quelque partie que ce soit de ce manuel ou son emploi  
pour tout autre but que des opérations ou entretiens de  
l’équipement à moins dune permission écrite de Sony  
Corporation.  
Das in dieser Anleitung enthaltene Material besteht aus  
Informationen, die Eigentum der Sony Corporation sind.  
Die Sony Corporation untersagt ausdrücklich die  
Vervielfältigung jeglicher Teile dieser Anleitung oder den  
Gebrauch derselben für irgendeinen anderen Zweck als  
die Bedienung oder Wartung der in dieser Anleitung  
beschriebenen  
Ausrüstung  
ohne  
ausdrückliche  
schriftliche Erlaubnis der Sony Corporation.  
HKSR-5803SQ/5803HQ  
 
HKSR-5803SQ (SY)  
HKSR-5803HQ (SY) J, E  
3-286-478-01  
Printed in Japan  
2007. 10 08  
©2007  
Sony Corporation  
 

Sharp Cash Register XE A40S User Manual
Sharp CD Player CD DD4500 User Manual
Sherwood Cassette Player DD 6200 User Manual
Sony DVD Player DVP NC650V User Manual
Sony Headphones MDR D333LW User Manual
Sony Home Theater System DAV DX255 User Manual
Speed Queen Washer DA3000 User Manual
Stamina Products Exercise Bike 15 7200 User Manual
Subaru Robin Power Products Portable Generator EC17D User Manual
SUPER MICRO Computer Computer Hardware R1K62BP User Manual