Sony Range CDX GT410U User Manual

Display items for CD / Repeat and shuffle play / Playback USB devices /  
Display items for USB / Listening to music on a Mass Storage Class type audio  
device / Listening to music on “Walkman” (ATRAC Audio Device) / Adjusting the  
sound characteristics / Customizing the equalizer curve / Adjusting setup items  
CDX-GT410U  
SET UP  
RADIO  
Location of controls and basic operations  
Detaching the front panel  
Setting the clock  
Storing stations automatically  
— BTM  
You can detach the front panel of this unit to  
prevent theft.  
The clock uses a 24-hour digital indication.  
Notes  
Disc slot  
Insert the disc (label side up), and playback  
  (+)/(–) buttons  
Before operating the unit for the first time, or  
after replacing the car battery or changing the  
connections, you must reset the unit.  
Pressing the RESET button will erase the clock  
setting and some stored contents.  
Main unit  
To control CD, the same as / (GP/  
ALBM –/+) on the unit.  
The unit selects strong signal stations and stores  
them. You can store up to 6 stations per band  
(FM1, FM2, FM3, MW, or LW).  
1 Press and hold the select button.  
starts automatically. You can play CD-DA  
(also containing CD TEXT), CD-R/CD-RW  
(MP3/WMA/AAC files also containing  
Multi Session) and ATRAC CD (ATRAC3  
and ATRAC3plus format).  
1 Press .  
The setup display appears.  
SCRL (scroll) button  
The unit is turned off.  
12 3  
4
5
6
7 8  
2 Press the select button repeatedly  
until “CLOCK-ADJ” appears.  
To scroll the display item.  
2 Press , then pull it off towards you.  
Caution  
Number buttons  
Number buttons  
When tuning in stations while driving, use Best  
Tuning Memory (BTM) to prevent an accident.  
OFF  
CD/MD*1/USB*2:  
3 Press  +.  
To receive stored stations (press); store  
stations (press and hold).  
/: GP*5/ALBM*6 –/+  
To skip groups/albums (press); skip  
groups/albums continuously (press and  
hold)*7.  
The hour indication flashes.  
Display window  
USB terminal  
PUSH SELECT  
EQ3  
SEEK  
SOURCE  
SEEK  
4 Rotate the volume control dial to set  
1 Press  repeatedly until  
“TUNER” appears.  
the hour and minute.  
To connect to the USB device.  
*1 When an MD changer is connected.  
*2 When a USB device is connected.  
*3 When a CD/MD changer is connected.  
*4 When an ATRAC Audio Device is connected.  
*5 When an ATRAC CD is played.  
*6 When an MP3/WMA/AAC is played.  
*7 If the changer/USB device is connected, the  
operation is different.  
To move the digital indication, press   
–/+.  
To change the band, press   
repeatedly. You can select from FM1, FM2,  
FM3, MW or LW.  
PTY  
MODE  
  (eject) button  
: REP  
DIM  
GP/ALBM  
REP  
3
SHUF  
PAUSE  
: SHUF  
To eject the disc.  
AUX  
DSPL  
1
2
4
5
6
AF/TA  
: PAUSE*8  
5 Press the select button.  
PTY (Program Type) button  
The setup is complete and the clock starts.  
2 Press and hold the select button.  
To pause playback. To cancel, press  
again.  
Attaching the front panel  
To select PTY in RDS. After pressing  
, press  –/+ to search for a  
station.  
CDX-GT410U  
The setup display appears.  
Engage part of the front panel with part of  
the unit, as illustrated, and push the left side into  
position until it clicks.  
Tip  
9 q; qa qs qdqfqg  
qh  
qj qk  
Radio:  
3 Press the select button repeatedly  
until “BTM” appears.  
You can set the clock automatically with the RDS  
feature. For details, see “Adjusting setup items” on the  
reverse side of the sheet, and set to “CT-ON” (Clock  
Time).  
*8 When playing back on this unit.  
To receive stored stations (press); store  
stations (press and hold).  
(front panel release) button  
Notes  
4 Press  +.  
Before using the card remote commander for the  
first time, remove the insulation film.  
When ejecting/inserting a disc, keep any USB  
devices disconnected to avoid damage to the disc.  
If the unit is turned off and the display disappears,  
it cannot be operated with the card remote  
commander unless  on the unit is  
pressed, or a disc is inserted to activate the unit  
first.  
Card remote commander  
RM-X151  
SEEK –/+ buttons  
AF/TA button  
The unit stores stations in order of frequency  
on the number buttons.  
CD/MD*1/USB*2:  
AF (Alternative Frequencies)/TA (Traffic  
Announcement), TP (Traffic Programme):  
Each time you press , the item  
changes as follows:  
To skip tracks (press); skip tracks  
continuously (press, then press again within  
about 1 second and hold); reverse/fast-  
forward a track (press and hold).  
A beep sounds when the setting is stored.  
wa  
ws  
qd  
1
4
ql  
OFF  
ATT  
AF-ON TA-ON AF,TA-ON   
AF,TA-OFF  
SOURCE  
SEL  
MODE  
Radio:  
To tune in stations automatically (press);  
find a station manually (press and hold).  
AUX input jack  
Warning if your car’s ignition has no  
ACC position  
A
B
+
To connect a portable audio device.  
Receptor for the card remote  
OFF button  
Be sure to set the Auto Off function. The unit  
will shut off completely and automatically in  
the set time after the unit is turned off, which  
prevents battery drain. If you do not set the  
Auto Off function, press and hold   
until the display disappears each time you  
turn the ignition off.  
wd  
wf  
wg  
commander  
The following buttons on the card remote  
commander have also different buttons/functions  
from the unit.  
To power off; stop the source.  
MODE button  
EQ3 (equalizer) button  
DSPL  
SCRL  
qf  
To select the radio band (FM/MW/LW);  
To select an equalizer type (XPLOD,  
VOCAL, EDGE, CRUISE, SPACE,  
GRAVITY, CUSTOM or OFF).  
To adjust the equalizer curve, see  
“Customizing the equalizer curve” on the  
reverse side of this sheet.  
select the unit*3; select the play mode*4.  
  ()/() buttons  
1
4
2
5
3
6
To control CD/radio/MD/USB, the same as  
 –/+ on the unit.  
VOL (volume) +/– button  
DSPL (display)/DIM (dimmer) button  
To change display items (press); change the  
display brightness (press and hold).  
+
VOL  
To adjust volume.  
RESET button (located behind the front  
w;  
Volume control dial/select button  
ATT (attenuate) button  
panel)  
To adjust volume (rotate); select setup items  
(press and rotate).  
To attenuate the sound. To cancel, press  
again.  
Detach the front panel and press the RESET  
button with a pointed object, such as a ball-  
point pen.  
SOURCE button  
SEL (select) button  
To power on; change the source (Radio/CD/  
The same as the select button on the unit.  
MD*1/USB/AUX).  
© 2006 Sony Corporation  
 

Sharp Flat Panel Television LE914 User Manual
Silicon Image Computer Drive SSDS00 3650H R User Manual
Sony Blu ray Player BDV N9200W BDV N9200WL BDV N7200W BDV N7200WL BDV N5200W User Manual
Sony Car Stereo System PSP 180 User Manual
Sony Digital Camera DSC F505V User Manual
Sony DVD Recorder 4 131 978 141 User Manual
Sony DVR DSR 1800 User Manual
Sony Speaker System CMT HX7BT User Manual
Stanton DJ Equipment PRO 30 User Manual
Sub Zero Refrigerator Undercounter Refrigeration User Manual