4-178-316-91(1)
English
Identifying parts
Precautions
Stereo headset
Headset DR-350 (see fig. )
On Safety
Ear pad (Right)
Ear pad (Left)
Microphone
VOICE TUBE
UAB-350 is for only the headset (DR-350). If another headset is connected to the USB
Audio Box, malfunction may occur.
WARNING
Listening with the headset at high volume may affect your hearing. For traffic safety, do
not use while driving or cycling.
Attach the VOICE TUBE to the headset.
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on
the apparatus.
Be careful not to use the headset at too loud a volume level. Otherwise, audio feedback
(howling) may occur as the microphone picks up the sound from the headphone unit.
Do not drop your headset or subject it to external shock, as it may cause a malfunction.
Do not disassemble or attempt to open any parts of the system.
Grasp the plug part of the dedicated USB cable or headset cord when you disconnect
from the connectors or jacks.
USB Audio Box UAB-350 (see fig. )
PHONE VOLUME +* / - button (for headphone)
Adjust the volume level of the headset.
MIC MUTING button
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel
only.
(light out) OFF: The microphone is set to MUTING OFF mode.
(light up) MUTING: The microphone is set to MUTING ON mode.
After operating the headset with the dedicated USB cable or headset cord, disconnect
the USB cable from the computer if the headset is not to be used for an extended period
of time.
CE mark
USB Audio Box connection parts (see fig. )
Stereo Headset
Do not use alcohol, benzene, or thinner to clean the cabinet.
Sound from the headset may be interrupted depending on the communication
conditions of the network.
Headphone jack
Microphone jack* (Plug-in-power system)
Dedicated USB jack
The validity of the CE marking is restricted to only those countries when it is legally
enforced, mainly in the countries EEA (European Economic Area).
Do not put weight or pressure on the headset, especially the VOICE TUBE, as it may
cause the headset to deform during long storage.
Owner’s Record
Operating Instructions
Manual de instrucciones
* There is a tactile dot on the USB Audio Box for easy recognition.
The model number of this product is DR-350USB.
The serial number is located at the back of USB Audio Box UAB-350.
Record these numbers in the spaces provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No. DR-350USB
Do not clean the VOICE TUBE before detaching it from the headset. It may damage
the VOICE TUBE.
Step 1: Connection
Connect your USB Audio Box and computer with the supplied dedicated USB cable (see
fig. ).
The following should be considered regarding placement to avoid malfunctions.
Do not leave the system in a location near heat sources, radios or TV receivers, or a
place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.
Do not leave the system in a bathroom or other high-humidity location.
Although this system is magnetically shielded, do not leave recorded tapes, watches,
personal credit cards or floppy disks using magnetic coding in front of the system for
an extended period of time.
Serial No.
Notes
Information
The headset supports the USB 2.0 version (USB 2.0 Full Speed).
The headset is not guaranteed to operate with a USB hub or USB extension cable. Use
the supplied dedicated USB cable only.
If you have any questions about this product, you may call:
About headset usage
Act considerately
If the volume is too high, sound may leak outside the headset. Be careful not to raise the
volume so high that it bothers people around you. There is a tendency to raise the volume
when listening in noisy places. However, the volume should be kept at a level where you
can respond when called, etc.
When the headset is connected to the computer, the volume level of the computer may
be set to maximum. Turn down the volume of the computer beforehand.
When you use the USB Audio Box, the voice of a digital broadcast is not output from
the computer. To listen to the voice, connect the headset to the computer directly
without using the USB Audio Box.
Declaration of Conformity
Trade Name:
Model No.:
Responsible
Party:
SONY
UAB-350 (USB Audio Box)
Sony Electronics Inc.
Address:
16530 Via Esprillo, San Diego, CA 92127
USA
Step 2: Installing the USB driver
About the ear pads
Telephone No.: 858-942-2230
The ear pads are replaceable. Replace them when they are worn out. To replace the ear
USB drivers are included in operating systems if you are using Windows 2000, Windows
XP, Windows Vista, Windows 7, and Macintosh. USB drivers will be installed when the
system is connected to a computer for the first time. Follow the on-screen instructions to
install. For details, refer to the operating instructions of your computer.
pads, consult your nearest Sony dealer.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
DR-350USB
©2010 Sony Corporation Printed in Thailand
If you have any questions or problems concerning your system that are not covered in this
manual, please consult your nearest Sony dealer.
Note
When connecting to different USB ports, you may have to install USB drivers.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
For Windows 2000/Windows XP
When the system is connected to a computer, the USB Composite Device, USB Human
Interface Device and USB Audio Device are installed automatically.
Troubleshooting
Sound of the headset is low.
This equipment must not be co-located or operated in conjunction with any other
antenna or transmitter.
The headphone plug is not connected to the jack properly.
For Windows Vista/Windows 7
When the system is connected to a computer, the USB Composite Device, USB Human
Interface Device and UAB-350 are installed automatically.
Note
Connect the headphone plug properly.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
The volume control of your computer or the volume level of the music playback
software is turned down.
For Macintosh
Adjust the volume control.
Turn up the volume level of the music playback software.
When the system is connected to a computer, the UAB-350 is installed automatically.
There is no sound from the headset.
Step 3: Setting for music CD playback
The dedicated USB cable is not connected to your computer.
This setting is necessary when playing back a music CD in the CD-ROM drive.
Follow the instructions below according to your operating system and click the check box
of [Enable digital CD audio for this CD-ROM device]. For Windows Vista, Windows 7
and Macintosh, setting for music CD playback is not necessary.
Connect the dedicated USB cable to your computer.
The headphone plug is not connected to the headphone jack.
Connect the headphone plug to the headphone jack.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
The system is connected while music software is in use.
Stop playback of the music software and start again.
For Windows 2000
– Consult the dealer or an experienced radio/TV technician for help.
Click the [Start] menu, and select [Settings], [Control Panel], [Sounds and
Multimedia], and [Hardware] tab. Select the CD-ROM drive for playing music, click
[Properties], and then click the [Properties] tab again. Click the check box of [Enable
digital CD audio for this CD-ROM device].
The audio device of your computer is not set correctly.
For Windows 2000
Disposal of Old Electrical & Electronic Equipment (Applicable
in the European Union and other European countries with
separate collection systems)
Click the [Start] menu, and select [Settings], [Control Panel], [Sounds and
Multimedia], [Audio] tab, and then select [UAB-350] for [Preferred device] in the
Sound Playback menu.
For Windows XP
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of
materials will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local Civic Office, your household waste
disposal service or the shop where you purchased the product.
For Windows XP
Click the [start] menu, and select [Control Panel], [Sounds, Speech and Audio
Devices], [Sounds and Audio Devices], and [Hardware] tab. Select the CD-ROM drive
for playing music, click [Properties], and then click the [Properties] tab again. Click the
check box of [Enable digital CD audio for this CD-ROM device].
Click the [start] menu, select [Control Panel], [Sounds, Speech and Audio
Devices], [Sounds and Audio Devices], [Audio] tab, and then select [UAB-350]
for [Default device] in the Sound playback menu.
For Windows Vista
Click the [Start] menu, select [Control Panel], [Hardware and Sound], [Sound],
[Playback] tab, select [UAB-350] for the playback device, and then click [Set
default].
How to use
For Windows 7
1
Attach the VOICE TUBE to the headset, with the Sony logo facing outwards
(see fig. ).
The VOICE TUBE helps the microphone more effectively pick up your voice.
Click the [Start] menu, select [Control Panel], [Hardware and Sound], [Sound],
[Playback] tab, select [UAB-350] for the playback device, and then click [Set
default].
Microsoft and Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Macintosh and Mac OS are registered trademarks of Apple Inc. in the U.S. and other
countries.
For Macintosh
2
Connect the headphone plug (black) to the headphone jack and connect the
microphone plug (pink) to the microphone jack (see fig. ).
UAB-350 is for only the headset (DR-350). If another headset is connected to the USB
Audio Box, malfunction may occur.
Click the [Apple] menu, select [System Preferences], [Sound], [Output] tab, and
IBM and PC/AT are trademarks and registered trademarks of International Business
Machines Corporation.
then select [UAB-350] for [Select a device for sound output].
Pentium is a trademark or registered trademark of Intel Corporation.
"WALKMAN" and "WALKMAN" logo are registered trademarks of Sony Corporation.
The volume control of your computer or the music playback software, etc., is set to
mute.
3
Adjust the band of the headset, and then wear the ear pad marked on your
right ear, and the one marked on your left ear.
There is a tactile dot on the unit marked to distinguish the left side (see fig. ).
To the USB Jack
Skype is a trademark of Skype Limited.
Unset mute.
™
In this manual, Windows 2000 Professional is referred to as Windows 2000.
To the dedicated USB jack
®
Your computer does not recognize the headset as a USB device.
In this manual, Windows XP Home Edition, Windows XP Professional and
®
®
Restart your computer.
Windows XP Media Center Edition are referred to as Windows XP.
Adjusting the volume level of the microphone
®
In this manual, Windows Vista is referred to as Windows Vista.
The CD-ROM drive of your computer does not support the digital play function of
WDM.
Check and adjust the volume level of the microphone by the computer. Follow the
instructions below according to your operating system, and check/adjust the volume level.
For details on the operation of your computer, refer to the operating instructions of your
computer.
®
In this manual, Windows 7 Edition is referred to as Windows 7.
Dedicated USB cable (supplied)
®
In this manual, Macintosh is referred to as Macintosh.
Use a CD-ROM drive that supports the digital play function of WDM.
®
All other names of systems and products are trademarks or registered trademarks of
Sound is disrupted.
their respective owners. and marks are omitted in this manual.
™ ®
For Windows
PC screen terms depicted in this manual may differ from the actual terms.
The CPU of your computer is overloaded.
Exit other applications.
For Windows 2000
Click the [Start] menu, select [Programs], [Accessories], [Entertainment], [Sound
Recorder]. Check the volume level after recording with the [Sound Recorder]. If the
volume level is too high or too low, click the [Start] menu and select [Settings], [Control
Panel], [Sounds and Multimedia], and [Audio] tab. Check that [Preferred device] in
the Sound Recording menu is set to [UAB-350], and click [Volume] in Sound
Recording menu, and adjust the microphone input level.
Other USB devices are connected to your computer and being used simultaneously.
Quit operating other USB devices.
Welcome!
Thank you for purchasing the Sony DR-350USB Stereo Headset. Before operating the
unit, please read this manual thoroughly and retain it for future reference.
Some features are:
You cannot record sound from the microphone.
The microphone plug is not connected to the microphone jack.
Connect the microphone plug to the microphone jack.
VOICE TUBE
Ideal PC Headset for voice chatting, PC Gaming, and music listening.
Built-in high sensitivity microphone, plus detachable VOICE TUBE for superior
communications.
The MIC MUTING button is set to MUTING mode.
Set the MIC MUTING button to OFF.
For Windows XP
Click the [start] menu, select [All Programs], [Accessories], [Entertainment], and
[Sound Recorder]. Check the volume level after recording with the [Sound Recorder].
If the volume level is too high or too low, click the [start] menu and select [Control
Panel], [Sounds, Speech and Audio Devices], [Sounds and Audio Devices], and
[Audio] tab. Check that [Default device] in the Sound recording menu is set to [UAB-
350] and click [Volume] in Sound recording menu, and adjust the microphone input
level.
Smart design and low pressure ear pad for long lasting wearing comfort.
Practical dual use both mini plug and USB.
The audio recording device of your computer is not set correctly.
For Windows 2000
Handy operation via USB Audio Box functions, such as volume control and mic
muting.
Click the [Start] menu, and select [Settings], [Control Panel], [Sounds and
Multimedia], [Audio] tab, and then select [UAB-350] for [Preferred device] in the
Sound Recording menu.
For Windows XP
Click the [start] menu, select [Control Panel], [Sounds, Speech and Audio
Devices], [Sounds and Audio Devices], [Audio] tab, and then select [UAB-350]
for [Default device] in the Sound recording menu.
For Windows Vista
Specifications
For Windows Vista
Click the [Start] menu, select [All Programs], [Accessories], [Sound Recorder].
Record with the [Sound Recorder]. Click the [Start] menu and select [Control Panel],
[Hardware and Sound], [Sound], [Recording] tab, and select [UAB-350] for the
recording device and click [Set Default]. Select [UAB-350] again, click [Properties],
select the [Levels] tab, and adjust the microphone input level.
Stereo Headset DR-350
Cord
Plug
1.2 m (47 1/4 in.)
Gold plated stereo mini plug (for headphone)
Gold plated mini plug (for microphone)
Approx. 110 g (3.9 oz.) (without cord)
Click the [Start] menu, select [Control Panel], [Hardware and Sound], [Sound],
[Recording] tab, select [UAB-350] for the recording device, and then click [Set
Default].
Mass
For Windows 7
For Windows 7
Headphones
Type
Click the [Start] menu, select [Control Panel], [Hardware and Sound], [Sound],
[Recording] tab, select [UAB-350] for the recording device, and then click [Set
Default].
Open air dynamic
30 mm, dome type (CCAW adopted)
1,000 mW (IEC*1)
24 Ω at 1 kHz
100 dB/mW
14 - 22,000 Hz
Click the [Start] menu, select [All Programs], [Accessories], [Sound Recorder].
Record with the [Sound Recorder]. Click the [Start] menu and select [Control Panel],
[Hardware and Sound], [Sound], [Recording] tab, and select [UAB-350] for the
recording device and click [Set Default]. Select [UAB-350] again, click [Properties],
select the [Levels] tab, and adjust the microphone input level.
Tactile dot
Driver unit
Power handling capacity
Impedance
For Macintosh
Click the [Apple] menu, select [System Preferences], [Sound], [Input] tab, and
Sensitivity
then select [UAB-350] for [Select a device for sound input].
Frequency response
For Macintosh
Recorded sound is low.
Microphone
Design
Type
Click the [Apple] menu, select [System Preferences], [Sound], [Input] tab, and adjust
Built-in microphone
Electret condenser
The microphone plug is not connected to the microphone jack properly.
the microphone input level.
Notes
Connect the microphone plug properly.
Open circuit voltage level -38 dB (0 dB = 1 V/Pa)
The VOICE TUBE is not attached.
The microphone does not support muting on the audio recording device of your
Effective frequency rage
20 - 10,000 Hz
Attach the VOICE TUBE to the headset.
computer. Set MUTING OFF mode by pressing the MIC MUTING button on the USB
Audio Box to mute the microphone.
USB Audio Box UAB-350
The volume level of the microphone is set too low on the computer.
Increase the volume level of the microphone on the computer.
Frequency range
20 - 20,000 Hz (headphone)
You may have to perform settings depending on the software. For details, refer to the
operating instructions of your software.
200 - 10,000 Hz (microphone)
Output for headphone (mini jack/stereo)
Impedance load: 24 Ω
Input/Output jacks
There is noise in recorded sound.
Using the headset separately
There are electrical wires, fluorescent lights or mobile phones near the headset
You can also use the headset without the USB Audio Box.
Input for microphone (mini jack/monaural)
Plug-in-power system
(especially the microphone).
Connect the headphone plug (black) to the headphone jack of the computer and connect
the microphone plug (pink) to the microphone jack of the computer (see fig. ).
Move away from any possible sources of electromagnetic interference.
Dedicated USB jack
Power supply
Dimensions (excluding projection)
USB bus power compliant (5 V, 100 mA)
Notes
Recorded sound is distorted.
When you connect the headset to the computer directly, this headset does not operate
Approx. 31 × 16 × 73 mm (w/h/d)
The volume level of the microphone is set too high on the computer.
Decrease the volume level of the microphone on the computer.
for Apple Macintosh or Mac OS.
(1 1/4 × 21 32 × 2 7/8 in.)
/
When you control the volume of the headset, adjust it on the computer.
Mass
Approx. 25 g (0.9 oz.)
The MIC MUTING button does not work.
When you do not use the microphone plug
Operating environment
Compliant computer:
When listening to a Walkman, etc., but not using the microphone, you can insert the
microphone plug into the plug holder attached to the headphone plug so that it does not
dangle (see fig. ).
IBM PC/AT or compatible computers
Apple Macintosh
The MUTING mode cannot be unset by the MIC MUTING button, if setting on the
computer.
Compliant OS:
Windows 7
Unset mute on the computer.
When you do not use the VOICE TUBE
Starter/Home Basic/Home Premium/Professional/
Ultimate
For details on operation of your computer, refer to the operating instructions of your
computer.
When storing the VOICE TUBE, you can attach it to the headset to avoid losing it (see fig.
).
Windows Vista
Insert the convex section of the cord in the hole of the VOICE TUBE.
Rotate the VOICE TUBE 90-degrees to secure in place.
Some problems may not be solved even with Troubleshooting. In such cases, contact your
nearest Sony dealer.
Home Basic/Home Premium/Business/Ultimate
Windows XP
Home Edition (SP2 or later)/Professional (SP2 or later)/
Media Center Edition 2004 (SP2 or later)/ Media
Center Edition 2005 (SP2 or later)
Windows 2000
Professional (SP4)
Mac OS X (10.3 or later)
CPU: Pentium II 266 MHz or better
USB port*2
Supplied accessories
Dedicated USB cable (1)
VOICE TUBE (1)
Operating Instructions (1)
For the operating environment mentioned above, the headset is not guaranteed to
operate with all computers.
The headset is not guaranteed to operate with home built computers, operating systems
that are personally up-graded, or multiple operating systems.
The headset is not guaranteed to operate with functions such as system suspend, sleep
and hibernation, on all computers.
*1 IEC (International Electronic Committee) tested.
*2 The USB Audio Box supports USB 2.0 (USB 2.0 Full Speed).
Design and specifications are subject to change without notice.
|