Easyflex® Boundary Microphone
User Guide
3
Mark and drill three holes in surface: #1 for cable, #2 and #3 for screws
Shure Easyflex EZB Series microphones are small,
surface mounted electret condenser microphones
designed for mounting on conference tables, stage
floors, and lecterns. Their wide frequency range
makes them especially suitable for picking up speech
and vocals in sound reinforcement and recording
applications.
Features
· Flat frequency response across the vocal range
for uncolored sound.
· Sleek, low-profile design for unobtrusive appearance.
4
Model Variations
· EZB/C-Cardioid
· EZB/O-Omnidirectional
2
Lower cable through hole #1
Insert #4 (small) screws in holes #2 and #3
3
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 800-257-4873 Fax: 847-600-1212
2
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 852-2893-4290 Fax: 852-2893-4055
Elsewhere, Phone: 847-600-2000 Fax: 847-600-6336
©2003, Shure Incorporated
27B3124 (Rev. 2)
3
2
1
5
Remove grille
Replace grille and reconnect preamp
6
Secure preamp using #8 (large) screw
B = Blue
R = Red
S = Silver
Disconnect cable from preamp
Permanent Installation · Installation Permanente ·
Dauerhafte Anbringung · Instalacion Permanente ·
Installazione Permanente ·
|