Samsung DVD Player AK68 00435B User Guide

DVD Player  
DVD-P248A  
AK68-00435B  
 
General Features  
Disc Type and Characteristics  
Excellent Sound  
Note  
This DVD player is capable of playing the following types of discs with the corresponding  
logos:  
Dolby Digital, a technology developed by Dolby  
Laboratories provides crystal clear sound  
reproduction.  
* Discs which cannot be played with this player.  
DVD-ROM  
CD-ROM  
CDI  
DVD-RAM  
CDV  
Recording Types Disc Size Max. Playing Time  
Characteristics  
Disc Types (Logos)  
Screen  
HD layer of super Audio CD  
CDGs play audio only, not graphics.  
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
DVD  
Video with MPEG-2 compression technology.  
Both regular and widescreen(16:9) pictures can be  
viewed.  
12 Cm  
Double-sided 480 min.  
Audio  
+
* Ability to play back may depend on recording  
conditions.  
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Video  
8 Cm  
Double-sided 160 min.  
Slow Motion  
An important scene can be viewed in slow motion.  
DVD-R, +R  
CD-RW  
DVD+RW, -RW  
VIDEO-CD  
AUDIO-CD  
Programmed Play  
* It may not play CD-R, CD-RW and DVD-R in all  
cases due to the type of disc or condition of the  
recording.  
74 min.  
20 min.  
12 Cm  
8 Cm  
Audio  
+
Video  
Video with CD sound, VHS  
quality & MPEG-1 compression  
technology.  
You can program tracks to play in desired order.  
(CD)  
Parental Control  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
protection. Because of this, you should only  
connect your DVD player directly to your TV, not  
to a VCR. Connecting to a VCR results in a  
distorted picture from copy-protected DVD discs.  
CD is recorded as a Digital  
Signal with better audio quality,  
less distortion and less  
deterioration of audio quality  
over time.  
74 min.  
20 min.  
12 Cm  
8 Cm  
Audio  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise  
EZ VIEW  
Easy View can convert Letter Box images to  
full screen viewing on your conventional TV.  
Disc Markings  
Play Region Number  
Both the DVD player and the discs are coded by region.  
These regional codes must match in order for the disc to  
play. If the codes do not match, the disc will not play.  
~
Play Region Number  
Digital Photo Viewer (JPEG)  
You can view the Digital Photos on your TV.  
NTSC broadcast system in U.S.A, Canada,  
Korea, Japan, etc.  
The Region Number for this player is described on the  
rear panel of the player.  
authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
NTSC  
Repeat  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
Dolby Digital disc  
Stereo disc  
PROGRESSIVE SCAN OUTPUTS (525p/625p)  
STEREO  
MP3/WMA  
This unit can play discs created from MP3/WMA  
files.  
CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE  
SCAN PICTURE PROBLEMS, IT IS RECOMMEND-  
ED THAT THE USER SWITCH THE CONNECTION  
TO THE STANDARD DEFINITIONOUTPUT.  
IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p AND  
625p DVD PLAYER, PLEASE CONTACT OUR  
CUSTOMER SERVICE CENTER.”  
DIGITAL  
SOUND  
Digital Audio disc  
Instant Replay  
DTS disc  
MP3 disc  
This function is used to replay the previous  
10 seconds of the movie from the current  
position.  
Instant Skip  
This function skips playback ahead 10  
seconds.  
ENG-4  
ENG-5  
 
Description-Front Panel  
Description-Rear Panel  
STANDBY/ON  
EZ VIEW  
Pr  
Pb  
Y
COAXIAL  
COMPONENT VIDEO OUT  
OPTICAL  
1
2
3 4 5 6  
8
7
9
R
L
ANALOG AUDIO OUT  
VIDEO OUT  
S-VIDEO OUT  
Front Panel Controls  
1. STANDBY/ON (  
When the unit is first plugged in, the indica-  
tor lights. When STANDBY/ON is pressed  
on again, the light goes out and the player  
is turned on.  
)
5. SKIP (  
) / SEARCH  
Allows you to search forward through a disc.  
1
2
3
4
5
Use to skip the title, chapter or track.  
6. EZ VIEW  
2. SKIP (  
) / SEARCH  
Easy View can convert Letter Box images to full  
screen viewing on your conventional TV.  
Rear Panel  
Allows you to search backward through a disc.  
Use to skip the title, chapter or track.  
1. DIGITAL AUDIO OUT JACKS  
7. OPEN/CLOSE (  
Press to open and close the disc tray.  
)
5. COMPONENT VIDEO OUT JACKS  
Use these jacks if you have a TV with  
Component Video in jacks. These jacks provide  
Pr, Pb and Y video. Along with S-Video,  
Component Video provides the best picture  
quality.  
If Component(P-SCAN) Video Output is select-  
ed in Setup Menu, progressive scan mode will  
work.  
Use either an optical or coaxial digital cable to  
connect to a compatible Dolby Digital receiver.  
Use to connect to an A/V Amplifier that contains  
a Dolby Digital or DTS decoder.  
3. STOP (  
)
Stops disc play.  
8. DISPLAY  
Operation indicators are displayed here  
4. PLAY/PAUSE (  
)
.
Begin or pause disc play.  
9. DISC TRAY  
Place the disc here.  
2. ANALOG AUDIO OUT JACKS  
Connect to the Audio input jacks of your  
television, audio/video receiver.  
If Component(I-SCAN) Video Output is selected  
in Setup Menu, interlaced scan mode will work.  
3. VIDEO OUT JACK  
Use a video cable to connect to the Video input  
Display Indicators  
jack on your television.  
The Video Output in Setup Menu must be set to  
the Component(I-SCAN) or S-Video.  
Important Note  
Consult your TV Users Manual to find out if your  
TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV  
Users Manuals instructions regarding Progressive  
Scan settings in the TVs menu system.  
1
4. S-VIDEO OUT JACK  
Use the S-Video cable to connect this jack to  
the S-Video jack on your television for a higher  
picture quality.  
The Video Output in Setup Menu must be set to  
the S-Video.  
If Component(P-SCAN) Video Output is selected  
in Setup Menu, Video and S-Video will not work.  
2
3
Front Panel Display  
1. Disc type indicators  
See page 28 to get more information on how to  
use the Setup Menu.  
2. Play / Pause / Forward play  
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...  
no DISC : No disc loaded.  
OPEN : The disc tray is open.  
LOAD : Player is loading disc information.  
ENG-6  
ENG-7  
 
Tour of the Remote Control  
Choosing a Connection  
6. STOP Button (  
7. MENU Button  
)
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
Brings up the DVD players setup menu.  
1
2
11  
Before Connecting the DVD Player  
8. RETURN Button  
Returns to a previous menu.  
Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.  
Refer to the owners manual of the additional components you are connecting for more information on those  
particular components.  
9. REPEAT A-B Button  
Use to mark a segment to repeat between A and B.  
Connection to an Audio  
12  
13  
14  
3
4
5
10. SUBTITLE Button  
11. OPEN/CLOSE (  
) Button  
Method 1  
Method 2  
To open and close the disc tray.  
15  
16  
6
7
12. CLEAR Button  
Use to remove menus or status displays from the  
screen.  
17  
18  
AUDIO  
SYSTEM  
8
13. INSTANT REPLAY Button  
This function is used to replay the previous 10  
seconds of the movie from the current position.  
2ch Amplifier  
Dolby Digital Decoder  
Digital Audio Input Jack  
Audio Input Jacks  
14. INSTANT SKIP Button  
9
19  
This function skips playback ahead 10 seconds.  
20  
21  
22  
10  
15. PLAY/PAUSE Button (  
)
Begin/Pause disc play.  
16. INFO Button  
Displays the current disc mode.  
OR  
17. DISC MENU Button  
Brings up the Disc menu.  
18. ENTER/DIRECTION Button  
(UP/DOWN or LEFT/RIGHT Buttons)  
This button functions as a toggle switch.  
DVD Function Buttons  
DVD  
Player  
OPTICAL  
1. DVD POWER Button  
Turns the power on or off.  
R
L
ANALOG AUDIO OUT  
19. EZ VIEW Button  
COAXIAL  
Easy View can convert Letter Box images to full  
screen viewing on your conventional TV.  
Analog Audio Out  
Digital Audio Out  
2. NUMBER Buttons  
20. REPEAT Button  
3. PROG Button  
Allows you to program a specific order.  
Allows you to repeat play a title, chapter, track, or  
disc.  
4. STEP Button  
Advances play one frame at a time.  
21. ANGLE Button  
Use to access various camera angles on a DVD.  
5. SEARCH/SKIP Buttons (  
/
,
/
)
22. AUDIO Button  
Allows you to search forward/backward through  
Use this button to access various audio functions  
on a disc.  
a disc. Use to skip the title, chapter or track.  
ENG-8  
ENG-9  
 
Choosing a Connection  
Playing a Disc  
7. Step Motion Play (Except CD)  
Press the STEP button on the remote during play.  
- Each time the button is pressed, a new frame will  
appear.  
Connection to a TV (For Video)  
TV (Normal, Widescreen, Projection, etc..)  
Before Play  
Turn on your TV and press the TV/VIDEO button  
to select the video mode.  
Turn on your Audio System and select AUX, CD or  
DVD.  
Method 1  
Method 2  
Method 3  
Method 4  
- No sound is heard during STEP mode.  
- Press the PLAY/PAUSE (  
) to resume normal play.  
Optimum  
picture  
Best  
picture  
Good  
Better  
picture  
(You can only perform step motion play in the forward  
direction.)  
Basic Audio  
picture  
After plugging in the player, the first time you press  
the DVD POWER button, this screen comes up :  
If you want to select the language, press a  
NUMBER button. (This screen will only appear  
when you plug in the player for the first time.)  
8. Slow Motion Play (Except CD)  
TV  
Press and hold the  
button on the remote during  
PAUSE or STEP mode. Press again and you can select  
slow motion play for 1/8, 1/4 and 1/2 of normal speed.  
- No sound is heard during slow mode.  
AV  
Cable  
S-Video  
Cable  
Video  
Cables  
- Press the PLAY/PAUSE (  
) to resume normal play.  
- Reverse slow motion play will not work.  
OR  
OR  
RESUME function  
When you stop disc play, the player remembers  
where you stopped, so when you press the  
DVD  
Player  
PLAY (  
) again, it will pick up where you left off.  
Pr  
Pb  
Y
Pr  
Pb  
Y
(unless the disc is removed or the player is  
R
L
VIDEO OUT  
ANALOG AUDIO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
COMPONENT VIDEO OUT  
Play  
unplugged, or if you press the STOP (  
twice.)  
) button  
Component Video  
Jacks  
(Progressive)  
Component Video  
Jacks  
(Interlace)  
Audio Output  
Jacks  
Video Output  
Jack  
S-Video  
Jack  
1. Press the OPEN/CLOSE button.  
The STANDBY indicator light goes out and the tray  
opens.  
Note  
Method 1  
If the player is left for 5 minutes in pause mode, it  
will stop.  
DVD Player + TV with Video Input Jack  
(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)  
2. Place a disc gently into the tray with the discs  
label facing up.  
If the player is left in the stop mode for more than  
30 minutes, the power will automatically shut off.  
(Automatic Power-Off Function)  
Method 2  
3. Press the PLAY/PAUSE (  
) button or  
OPEN/CLOSE button to close the disc tray.  
DVD Player + TV with S-Video Input Jack  
(The Video Output in Setup Menu must be set to the S-Video.)  
If the player is left in the stop mode for more than  
one minute without any user interaction, a screen  
4. Stopping Play  
Press the STOP (  
Method 3  
saver will be activated. Press the PLAY (  
button to resume normal play.  
)
) button during play.  
DVD Player + TV with interlace Scan Component Video Jacks  
(The Video Output in Setup Menu must be set to the Component(I-SCAN).)  
5. Removing Disc  
Press the OPEN/CLOSE button.  
This  
icon indicates an invalid button press.  
Method 4  
DVD Player + TV with Progressive Scan Component Video Jacks.  
(The Video Output in Setup Menu must be set to the Component(P-SCAN).)  
If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on  
your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,  
change the TVs external input to 525p(480p or Component) and select Yes(See Page 28).  
6. Pausing Play  
Press the PLAY/PAUSE (  
remote during play.  
- Screen stops, no sound.  
- To resume, press the PLAY/PAUSE (  
again.  
) or STEP button on the  
) button once  
If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.  
Important Note  
Consult your TV Users Manual to find out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV Users Manuals instructions regarding Progressive Scan  
settings in the TVs menu system.  
Depending on your TV, the Method of connection may differ from the illustration above.  
ENG-10  
ENG-11  
 
Using the Search & Skip Functions  
Using the Display Function  
Using the Display Function  
Using the Disc and Title Menu  
To access the desired title when there is  
During play, you can search quickly through a  
chapter or track or use the skip function to  
jump to the next selection.  
When Playing a DVD/VCD/CD  
1. During play, press the INFO button on the  
remote.  
Using the Disc Menu  
more than one in the disc.  
For example, if there is more than one  
movie on a DVD, each movie will be  
identified.  
Title  
1. During the playback of a DVD disc, press the  
MENU button on the remote.  
2. Use the UP/DOWN buttons to select the desired  
item.  
2. Select Disc Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Searching through a Chapter or Track  
Press the  
or  
button on the remote for more  
Most DVD discs are recorded in  
chapters so that you can quickly find a  
specific passage (similar to tracks on an  
audio CD).  
3. Use the LEFT/RIGHT buttons to make the  
desired setup and then press ENTER.  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from the desired time.  
than 1 second and press again to search at a faster  
speed on the DVD, VCD or CD.  
Chapter  
DVD 2X, 8X, 32X, 128X  
VCD 4X, 8X  
Allows playback of the film from a  
desired time. You must enter the starting  
time as a reference.  
4. To make the screen disappear, press the INFO  
button again.  
Time  
Audio  
CD 2X, 4X, 8X  
Refers to the language of the film  
soundtrack. In the example, the  
soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight  
different soundtracks.  
DVD  
Skipping Tracks  
DVD  
Using the Title Menu  
01  
Title  
During play, press the  
When playing a DVD, if you press the  
moves to the next chapter. If you press the  
or  
button.  
button, it  
button, it  
02  
1. During the playback of a DVD disc, press the  
MENU button on the remote.  
Chapter  
0:00:13  
Time  
ENG 5.1CH  
Audio  
2. Select Title Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Off  
Refers to the subtitle languages  
available in the disc.  
Subtitle  
moves to the beginning of the chapter. One more press  
makes it move to the beginning of the previous chapter.  
ENTER  
Subtitle  
You will be able to choose the subtitle  
languages or, if you prefer, turn them off  
from the screen.  
A DVD disc can have up to 32 different  
subtitles.  
When playing a VCD 2.0 in MENU OFF mode, a CD, if  
you press the  
you press the  
button, it moves to the next track. If  
button, it moves to the  
VCD  
beginning of the track. One more press makes it move to  
the beginning of the previous track.  
VCD  
01  
Track  
When playing a VCD 2.0 in MENU OFF mode, if a track  
0:00:48  
Time  
ENTER  
exceeds 15 minutes when playing a VCD and you press  
the  
button, it moves forward 5 minutes.  
Note  
If you press the  
button, it moves backward 5 minutes.  
* When in VCD 2.0 mode (MENU ON mode), this  
function does not work. (See page 12)  
Note  
Note  
CD  
Depending on the disc, the Title and Disc Menus  
may not work.  
* When playing a VCD 2.0, you can choose MENU  
ON or MENU OFF by using the DISC MENU  
button.  
CD  
01  
Track  
Title Menu will only be displayed if there are at  
least two titles in the disc.  
0:00:48  
Time  
ENTER  
You can also use the Disc Menu, using the DISC  
MENU button on the remote.  
In VCD 2.0, the DISC MENU button is used to  
select Menu On or Menu Off mode.  
ENG-12  
ENG-13  
 
Using the Function Menu  
Repeat Play  
Program Play & Random Play  
Slow Repeat Play  
Using the Function Menu  
Repeat the current track, chapter, title, a  
chosen section (A-B), or all of the disc.  
Program Play (CD)  
This feature allows you slowly to repeat  
scenes containing sports, dancing, musical  
instruments being played etc. so you can  
study them more closely.  
1. Press the MENU button during playback.  
1. Press the PROG button.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
2. Use the LEFT/RIGHT buttons to select  
PROGRAM. Press the ENTER button.  
When playing a DVD/VCD/CD  
1. Press the REPEAT button on the remote.  
Repeat screen appears.  
When playing a DVD/VCD  
3. Use the LEFT/RIGHT/UP/DOWN buttons to  
select the first track to add to the program.  
Press the ENTER button. The selection numbers  
appear in the Program Order box.  
3. Function selection screen appears: Info, Zoom,  
Bookmark, Repeat and EZ View.  
1. During play, press the PLAY/PAUSE (  
button.  
)
2. Select Chapter, Title or A-B using the  
LEFT/RIGHT buttons.  
-
-
-
-
-
Info (See Page 12~13)  
Zoom (See Page 20)  
Bookmark (See Page 19)  
Repeat (See Page 14)  
EZ View (See Page 16)  
2. Press and hold the  
button on the remote  
Chapter (  
) : repeats the chapter that is playing.  
4. Press the PLAY/PAUSE (  
The disc will be played in programmed order.  
) button.  
Title ( T ) : repeats the title that is playing.  
A-B : repeats a segment of the disc that you select.  
during PAUSE or STEP mode. Press again and  
you can select slow motion play for 1/8, 1/4 and  
1/2 of normal speed.  
DVD  
PROGRAM  
RANDOM  
4. Use the UP/DOWN button to highlight one of the  
5 functions. Then press the RIGHT or ENTER  
button to access the function.  
3. Press the REPEAT A-B button to select the point  
where the function starts. (A)  
REPEAT ENTER  
Off  
01  
01 A - B  
T
4. Press the REPEAT A-B button to select the point  
where the function ends. (B)  
PROGRAM 01  
VCD/CD  
Track  
Program Order  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
REPEAT ENTER  
Off  
T
01  
D
01 A - B  
Note  
The disc will play from A to B repeatedly at the  
speed you chose.  
ENTER  
RETURN  
CLEAR  
To terminate the function, press the 'CLEAR' but-  
ton or the 'REPEAT A-B' button again.  
3. Press ENTER.  
A-B REPEAT does not allow you to set point (B)  
until at least 5 seconds has elapsed after point (A)  
has been set.  
4. To return to normal play, press REPEAT again,  
then press the LEFT/RIGHT buttons to select Off  
and press ENTER.  
Random Play (CD)  
1. Press the PROG button.  
Note  
When in VCD 2.0 mode (MENU ON mode), this  
function does not work. (See page 12)  
2. Use the LEFT/RIGHT buttons to select RANDOM.  
Press the ENTER button.  
You can also directly select the parts of these  
functions using their respective buttons on the  
remote.  
* REPEAT A-B button  
Press the REPEAT A-B button to select the point where  
the function starts. (A)  
Press the REPEAT A-B button to select the point where  
the function ends. (B)  
PROGRAM  
RANDOM  
To terminate the function, press the 'CLEAR' button or  
the 'REPEAT A-B' button again.  
A-B REPEAT does not allow you to set point (B) until at  
least 5 seconds has elapsed after point (A) has been  
set.  
Note  
Depending on the disc, the Program and Random  
Play functions may not work.  
Note  
DVD repeats play by chapter or title, CD and VCD  
repeat play by disc or track.  
PROGRAM/RANDOM playback cannot be used if  
the disc contains more than two types of file  
extensions.  
To terminate the function, press the CLEAR  
button.  
This unit can support a maximum of 20  
programmed tracks.  
Depending on the disc, the Repeat function may  
not work.  
While in playback mode, press the CLEAR button  
on the remote control to cancel Programmed Play  
or Random Play.  
When in VCD 2.0 mode (MENU ON mode), this  
function does not work. (See page 12)  
ENG-14  
ENG-15  
 
Adjusting the Aspect Ratio (EZ View)  
Selecting the Audio Language  
Selecting the Subtitle Language  
To play back using aspect ratio (DVD)  
Press the EZ VIEW button.  
If you are using a 4:3 TV  
You can select a desired language quickly and  
easily with the AUDIO button.  
You can select a desired subtitle quickly and  
easily with the SUBTITLE button.  
1. For 16:9 aspect ratio discs  
The screen size changes when the button is  
pressed repeatedly.  
The screen zoom mode operates differently  
depending on the screen setting in the initial setup  
menu.  
To ensure correct operation of the EZ VIEW  
button, you should set the correct aspect ratio in  
the initial setup (See page 27).  
4:3 Letter Box  
Using the AUDIO button  
Using the SUBTITLE button  
Displays the content of the DVD title in 16:9  
aspect ratio. The black bars will appear at the  
top and bottom of the screen.  
1. Press the AUDIO button.  
1. Press the SUBTITLE button.  
2. The Audio changes when the button is pressed  
repeatedly.  
- The audio languages are represented by abbreviations.  
2. The subtitle changes when the button is pressed  
repeatedly.  
4:3 Pan Scan  
The left and right of the screen are cut off and  
displays the central portion of the 16:9 screen.  
3. To turn off the display, press the CLEAR or  
RETURN button.  
- Initially, the subtitle will not appear on screen.  
- The subtitle languages are represented by  
abbreviations.  
3. Press the AUDIO button to select Stereo, Left or  
Right. (On VCD/CD)  
Screen Fit  
The top and bottom of the screen are cut off  
and the full screen appears.  
The picture will look vertically stretched.  
If you are using a 16:9 TV  
1. For 16:9 aspect ratio discs  
DVD  
Wide Screen  
Displays the content of the DVD title in 16:9  
aspect ratio.  
Zoom Fit  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
SUBTITLE  
ENG  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
Screen Fit  
The top and bottom of the screen are cut off.  
When playing a 2.35:1 aspect ratio disc, the  
black bars at the top and bottom of the screen  
will disappear. The picture will look vertically  
stretched. (Depending on the type of disc, the  
black bars may not disappear completely.)  
2. For 4:3 aspect ratio discs  
Normal Screen  
Displays the content of the DVD title in 4:3  
aspect ratio.  
VCD/CD  
SUBTITLE  
Off  
Screen Fit  
The top and bottom of the screen are cut off  
and the full screen appears.  
The picture would look vertically stretched.  
Zoom Fit  
AUDIO  
Stereo  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
Zoom Fit  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
2. For 4:3 aspect ratio discs  
Normal Wide  
Displays the content of the DVD title in 16:9  
aspect ratio. The picture will look horizontally  
stretched.  
Note  
Note  
Screen Fit  
The top and bottom of the screen are cut off  
and the full screen appears.  
The picture will look vertically stretched.  
Note  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
This function may behave differently depending on  
the type of disc.  
A DVD disc can contain up to 8 audio languages.  
A DVD disc can contain up to 32 subtitle  
languages.  
Zoom Fit  
How to have the same audio language come up  
whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 25.  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
How to have the same subtitle language come  
up whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 25.  
Vertical Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black  
bars will appear at the left and right of the  
screen in order to prevent the picture from  
looking horizontally stretched.  
ENG-16  
ENG-17  
 
Changing the Camera Angle  
Using the Instant Replay/Skip Function  
Using the Bookmark Function  
When a DVD contains multiple angles of a  
particular scene, you can select the Angle  
function.  
Using the Instant Replay function (DVD)  
This feature lets you bookmark sections of a  
DVD or VCD (MENU OFF mode) so you can  
quickly find them at a later time.  
Recalling a Marked Scene  
If you miss a scene, you can see it again using  
this function.  
1. During play, press the MENU button on the  
remote and select the Bookmark.  
Using the ANGLE button  
If you press the INSTANT REPLAY button, the  
current scene moves backward about 10 seconds,  
and plays back.  
Using the Bookmark Function (DVD/VCD)  
2. Use the LEFT/RIGHT buttons to select a marked  
scene.  
Press the ANGLE button to see if an ANGLE  
1. During play, press the MENU button on the  
remote.  
(
) mark is present at the upper left hand  
3. Press the PLAY/PAUSE (  
the marked scene.  
) buttons to skip to  
* Depending on the disc, the Instant Replay function may  
not work.  
corner of the screen.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
1. When an ANGLE mark is shown, press the  
ANGLE button, then an ANGLE select icon will  
appear at the upper hand corner of the screen.  
3. Select Bookmark using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
2. Press the ANGLE button to select the desired  
screen angle.  
4. Use the LEFT/RIGHT buttons to move to the  
desired bookmark icon.  
3. To turn off the display, press the CLEAR or  
RETURN button.  
5. When you reach the scene you want to mark,  
press the ENTER button. The icon will change to  
a number (1, 2, or 3).  
ANGLE  
4/6  
Clearing a Bookmark  
1. During play, press the MENU button on the  
remote and select the Bookmark.  
Using the Instant Skip function (DVD)  
Use this function to skip playback about 10  
seconds ahead of the current scene.  
2. Use the LEFT/RIGHT buttons to select the  
bookmark number you want to delete.  
Press the INSTANT SKIP button.  
3. Press the CLEAR button to delete a bookmark  
number.  
- Playback will skip ahead 10 seconds.  
- Depending on the disc, this function may not work.  
Note  
If the disc has only one angle, this feature wont  
work. Currently, very few discs have this feature.  
Note  
Up to three scenes may be marked at a time.  
When in VCD 2.0 mode (MENU ON mode), this  
function does not work. (See page 12)  
Depending on the disc, the Bookmark function may  
not work.  
ENG-18  
ENG-19  
 
Using the Zoom Function  
Clips Menu for MP3/WMA/JPEG  
Folder Selection  
MP3/WMA Play  
1. Open the disc tray.  
1. Open the disc tray.  
Using the Zoom Function (DVD/VCD)  
The folder can only be selected in the Stop  
mode.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
1. During play or pause mode, press the MENU  
button on the remote.  
To select the Parent Folder  
Press the RETURN button to go to parent folder,  
or use the UP/DOWN buttons to select ..and  
press ENTER to go to the parent folder.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
3. Select Zoom using the UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
To select the Peer Folder  
MP3/WMA Play Function  
Use the LEFT/RIGHT buttons to highlight left  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
O ff  
4. Use the UP/DOWN or LEFT/RIGHT buttons to  
select the part of the screen you want to zoom in  
on.  
1. Select the desired folder.  
00:00:23  
1_mp3  
2. Use the UP/DOWN or LEFT/RIGHT buttons to  
select a song file.  
To select the Sub-Folder  
5. Press the ENTER button.  
- During DVD play, press ENTER to zoom in  
2X/4X/2X/Normal in order.  
B e c a u s e Yo u  
C a c t u s  
Use the LEFT/RIGHT buttons to highlight right  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
Sad Day  
3. Press ENTER to begin playback of the song file.  
- During VCD play, press ENTER to zoom in 2X/Normal  
in order.  
O ff  
00:00:23  
1_mp3  
Root  
Parent Folder, Current Folder Folders and Files in  
and Peer Folders Current Folder  
WMA  
JPEG  
B e c a u s e Yo u  
C a c t u s  
Sad Day  
MP3  
Parent Folder  
: Name of currently playing file.  
: Current Playback Time.  
MUSIC  
Current Folder  
1st  
Sub-Folders  
Repeat/Random playback  
2nd  
: Current Playback Mode : There are 4  
modes, toggle by the REPEAT button.  
- Off : Normal Playback  
- Track : Repeats the current track.  
- Folder : Repeats the current folder.  
- Random : Files in the disc will be played  
in random order.  
Press the REPEAT button to change playback  
mode. There are 4 modes, Off, Track, Folder and  
Random.  
SONG FILE  
SONG FILE  
1
2
Peer Folders  
- Off : Normal Playback  
- Track : Repeats the current song file.  
- Folder : Repeats the song files which have the  
same extension in the current folder.  
- Random : Song files which have the same  
extension will be played in random  
order.  
SONG FILE  
3
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
: Folder icon.  
* To resume normal play, press the CLEAR button.  
: Current Folder icon.  
ENG-20  
ENG-21  
 
MP3/WMA Play  
Picture CD Playback  
Picture CD Playback  
Using the Setup Menu  
1. Select the desired folder. (See page 21 to select  
the folder)  
Note  
CD-R MP3/WMA discs  
When you record MP3 or WMA files on the CD-R,  
please refer to the following.  
The Setup menu lets you customize your DVD  
player by allowing you to select various  
language preferences, set up a parental level,  
even adjust the player to the type of television  
screen you have.  
If no buttons on the remote control pressed for 10  
seconds, the menu will disappear.  
Press the INFO button on the remote control to  
display the menu again.  
Press the STOP button to return to the clips menu.  
When playing a Kodak Picture CD, the unit  
2. Use the UP/DOWN buttons to select a Picture file in  
clips menu and then press the ENTER button. You  
should get a screen that looks like the one below.  
Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
1. With the unit in Stop mode, press the MENU  
button on the remote. Select Setup using  
UP/DOWN buttons, then press the RIGHT or  
ENTER button.  
ENTER RETURN  
displays the Photo directly, not the clips menu.  
When naming your MP3 or WMA files, do not exceed 8  
characters, and enter ".mp3, .wma" as the file  
extension.  
General name format of: Title.mp3. or Title.wma. When  
composing your title, make sure that you use 8 characters  
or less, have no spaces in the name, and avoid the use of  
special characters including: (.,/,\,=,+).  
CD-R JPEG Discs  
Language Setup : Setup of the Language.  
Only files with the .jpgand .JPGextensions can be  
played.  
Audio Setup : Setup of the Audio Options  
Use the INFO button on the remote control to select  
the menu you want to view and then press the  
ENTER button.  
If the disc is not closed, it will take longer to start  
playing and not all of the recorded files may be  
played.  
Display Setup : Setup of the Display Options  
Use to select which type of screen you want to  
watch and several display options.  
Use a decompression transfer rate of at least 128  
Kbps when recording MP3 files.  
: Returns to the Album Screen.  
Only CD-R discs with JPEG files in ISO 9660 or Joliet  
format can be played.  
Parental Setup : Setup of the Parental Level  
Allows users to set the level necessary to  
prevent children from viewing unsuitable  
movies such as those with violence, adult  
subject matter, etc.  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that  
is conversion to MP3 format, of at least 128 Kbps and up  
to 160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128  
Kbps will not be played properly.  
To see the next 6 pictures, press the  
button.  
button.  
The name of the JPEG file may not be longer than 8  
characters and should contain no blank spaces or  
special characters (. / = +).  
To see the previous 6 pictures, press the  
: Each time the ENTER button is pressed, the  
Only a consecutively written multisession disc can be  
played. If there is a blank segment in the multisession  
disc, the disc can be played only up to the blank  
segment.  
picture rotates 90 degrees clockwise.  
: Each time the ENTER button is pressed, the  
picture is enlarged up to 4X.  
Disc Menu  
Title Menu  
(Normal 2X 4X 2X Normal)  
Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
A maximum of 500 images can be stored on a single  
CD.  
: The unit enters slide show mode.  
Sound quality with WMA files basically depends on the  
rate of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital  
sampling rate, that is conversion to WMA format, of at  
least 64Kbps and up to 192Kbps.  
Function  
Setup  
Kodak Picture CDs are recommended.  
*Before the Slide Show begin, the picture interval must  
be set.  
When playing a Kodak Picture CD, only the JPEG  
files in the pictures folder can be played.  
Kodak Picture CD : The JPEG files in the pictures  
folder can be played automatically.  
ENTER RETURN  
TIMER:  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
2. Use the UP/DOWN buttons on the remote to  
access the different features.  
Konica Picture CD : If you want to see the Picture,  
select the JPEG files in the clips menu.  
Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected  
to prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of  
Microsoft Inc) and SDMITM (registered trade mark of The  
SDMI Foundation). You cannot copy such files.  
Fuji Picture CD : If you want to see the Picture, select  
the JPEG files in the clips menu.  
3. Press the ENTER or RIGHT button to access the  
sub features.  
QSS Picture CD : The unit cannot play QSS Picture  
CD.  
: When this icon is selected and ENTER is  
pressed, the pictures change automatically  
with about 6 seconds interval.  
To make the setup screen disappear after setting  
up, press the MENU button again.  
If a number of files in 1 Disc are over 3000, only 3000  
JPEG file can be played.  
Important: The above recommendations cannot be taken  
as a guarantee that the DVD player will play MP3  
: The pictures change automatically with about  
12 seconds interval.  
recordings, or as an assurance of sound quality. You  
should note that certain technologies and methods for  
MP3 file recording on CD-Rs prevent optimal playback of  
these files on your DVD player (degraded sound quality  
and in some cases, inability of the player to read the files).  
If a number of folders in 1 Disc are over 300, only  
JPEG files in 300 folders can be played.  
Note  
Depending on the disc, some Setup Menu  
selections may not work.  
: The pictures change automatically with about  
18 seconds interval.  
*Depending on the file size, each interval between  
images may take longer or shorter than the manual  
suggests.  
This unit can play a maximum of 3000 files and 300  
folders per disc.  
ENG-22  
ENG-23  
 
Setting Up the Language Features  
Setting Up the Language Features  
If you set the player menu, disc menu, audio  
and subtitle language in advance, they will  
come up automatically every time you watch a  
movie.  
Using the Disc Menu Language  
Using the Audio Language  
Using the Subtitle Language  
This function changes the text language only on the  
disc menu screens.  
1. With the unit in Stop mode, press the MENU  
button.  
1. With the unit in Stop mode, press the MENU  
button.  
1. With the unit in Stop mode, press the MENU  
button.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
Using the Player Menu Language  
1. With the unit in Stop mode, press the MENU  
button.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
4. Select Audio using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
4. Select Subtitle using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
4. Select Disc Menu using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
5. Press the UP/DOWN buttons to select English.  
- Select Originalif you want the default soundtrack  
language to be the original language the disc is  
recorded in.  
5. Use the UP/DOWN buttons to select English.  
- Select Automaticif you want the subtitle language to  
be the same as the language selected as the audio  
preference.  
e.g) Setting up in English.  
5. Use the UP/DOWN buttons to select English.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
Some discs may not contain the language you select  
as your initial language; in that case the disc will use its  
original language setting.  
e.g) Setting up in English.  
AUDIO LANGUAGE  
Audio  
4. Select Player Menu using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Original  
Others  
LANGUAGE SETUP  
6. Press the ENTER button.  
- English is selected and the screen returns to SETUP  
menu.  
6. Press the ENTER button.  
- English is selected and the screen returns to SETUP  
menu.  
6. Press the ENTER button.  
- English is selected and the screen returns to SETUP  
menu.  
5. Use the UP/DOWN buttons to select English.  
Note  
If the selected language is not recorded on the  
disc, the original pre-recorded language is  
selected.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
6. Press the ENTER button.  
- English is selected and the screen returns to SETUP  
menu.  
- To make the SETUP menu disappear, press the  
RETURN or LEFT button.  
ENG-24  
ENG-25  
 
Setting Up the Audio Options  
Setting Up the Display Options  
1. With the unit in Stop mode, press the MENU button.  
PCM Down Sampling  
1. With the unit in Stop mode, press the MENU button.  
Still Mode  
1. On : Select this when the amplifier connected to the  
player is not 96KHz compatible. In this case, the  
96KHz signals will be down converted to 48KHZ.  
These options will help prevent picture shake in still  
mode and display small text clearer.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
1. Auto : When selecting Auto, Field/Frame mode will be  
automatically converted.  
2. Off : Select this when the amplifier connected to the  
player is 96KHz compatible. In this case, all  
signals will be output without any changes.  
3. Select Audio Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
3. Select Display Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
2. Field : Select this feature when the screen shakes in  
the Auto mode.  
3. Frame : Select this feature when you want to see  
small letters more clearly in the Auto mode.  
Note  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
Screen Messages  
Use to turn on-screen messages On or Off.  
Manufactured under license from Dolby  
Laboratories. Dolbyand the double-D symbol are  
trademarks of Dolby Laboratories.  
Black Level  
Adjusts the brightness of the screen.(On/Off)  
• “DTSand DTS Digital Outare trademarks of  
Digital Theater Systems, Inc.  
TV System  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
1. NTSC Disc : In case of using NTSC disc  
If your TV system only has PAL-Video input you  
must choose PAL. When you choose PAL,  
Interlace output format is PAL 60 Hz output.  
TV Aspect  
Depending on the type of television you have, you may  
want to adjust the screen setting (aspect ratio).  
AUDIO SETUP  
If your TV system only has NTSC, input you must  
choose NTSC Output.  
Digital Output  
DTS  
:
:
:
:
PCM  
Off  
1. 4:3 Letter Box : Select when you want to see the total  
16:9 ratio screen DVD supplies, even though you  
have a TV with a 4:3 ratio screen. Black bars will  
appear at the top and bottom of the screen.  
Dynamic Compression  
PCM Down Sampling  
On  
2. PAL Disc : In case of using PAL disc  
If your TV system only has NTSC-Video input, you  
must choose NTSC Output.  
On  
2. 4:3 Pan Scan : Select this for conventional size TVs  
when you want to see the central portion of the 16:9  
screen. (Extreme left and right side of movie picture  
will be cut off.)  
If your TV system only has PAL input, you must  
choose PAL Output.  
3. 16:9 Wide : You can view the full 16:9 picture on your  
widescreen TV.  
Dolby Digital Output  
DISPLAY SETUP  
1. PCM : Converts to PCM(2CH) 48kHz audio. Select  
PCM when using the Analog Audio Outputs.  
TV Aspect  
:
:
:
Wide  
Auto  
On  
Still Mode  
DISPLAY SETUP  
Screen Messages  
2. Bitstream : Converts to Dolby Digital Bitstream  
(5.1CH). Select Bitstream when using the  
Digital Audio Output.  
Black Level  
TV System  
Video Output  
:
:
:
On  
NTSC  
S-Video  
TV Aspect  
:
:
:
Wide  
Auto  
On  
Still Mode  
Screen Messages  
Black Level  
TV System  
Video Output  
:
:
:
On  
NTSC  
S-Video  
Note Be sure to select the correct Digital Output or  
no audio will be heard.  
When Multi Channel Output select Digital.  
Dolby & MPEG-2 Digital Out works.  
DTS  
TV ASPECT  
1. Off : Doesnt output digital signal.  
2. On : Outputs DTS Bitstream via digital output only.  
Select DTS when connecting to a DTS Decoder.  
4:3 Letter Box  
4:3 Pan Scan  
16:9 Wide  
Dynamic Compression  
1. On : To select dynamic compression.  
2. Off : To select the standard range.  
ENG-26  
ENG-27  
 
Setting Up the Display Options  
Setting Up the Parental Control  
Setting Up the Parental Control  
Video Output  
Select Video Output.  
The Parental Control function works in conjunction  
with DVDs that have been assigned a rating - which  
helps you control the types of DVDs that your family  
watches. There are up to 8 rating levels on a disc.  
5. Select Rating Level using UP/DOWN buttons,  
and press ENTER or RIGHT button.  
CREATE PASSWORD  
1. S-Video : Select when you want to use Video and  
S-Video Out.  
Re-enter Password  
-
-
-
-
2. Component (I-SCAN) : Select when you want to use  
Video and Component (Interlace) Out  
1. With the unit in Stop mode, press the MENU button.  
3. Component (P-SCAN) : Select when you want to use  
Component (Progressive) Out.  
RETURN  
0 ~ 9  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
* If there is no Yes/No selection for 10 seconds at  
Display in the sub Menu, Video system returns to the  
previous menu.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
6. Select Rating Level you want using UP/DOWN  
buttons. For example, if you select up to Level 6,  
discs that contain Level 7, 8 will not play.  
- To cancel the Rating Level, select No using RIGHT or  
ENTER in Use Password.  
DISPLAY SETUP  
TV Aspect  
:
:
:
:
:
Wide  
Auto  
On  
Still Mode  
Screen Messages  
Black Level  
TV System  
On  
NTSC  
Video Output  
:
S-Video  
e.g) Setting up in LEVEL6.  
RATING LEVEL  
Setting Up the Rating Level  
Level 8 Adult  
Level 7  
DISPLAY SETUP  
4. Use RIGHT or ENTER to select Yes if you want  
to use a password. The Enter Password screen  
appears.  
Level 6  
Level 5  
Level 4  
Level 3  
Level 2  
Level 1 Kids Safe  
1. With the unit in Stop mode, press the MENU button.  
S-Video  
2. Select Setup using UP/DOWN buttons, then  
RIGHT or ENTER button.  
Component (I-SCAN)  
Component (P-SCAN)  
The player is locked (  
).  
PARENTAL SETUP  
Use Password  
:
No  
About the Change Password;  
- Highlight Change Password using UP/DOWN buttons.  
- Press ENTER button.  
ENTER  
RETURN  
MENU  
The Change Password screen appears.  
- Enter your new password. Enter the new password again.  
Important Note  
Consult your TV Users Manual to find out if your  
TV supports Progressive Scan. If Progressive  
Scan is supported, follow the TV Users Manuals  
instructions regarding Progressive Scan settings in  
the TVs menu system.  
5. Enter your password. The Re-enter Password  
screen appears to confirm the password.  
Enter your password again.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Note  
The player is locked (  
).  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
If the screen is blocked by setting the wrong Video  
Output, See page 30.  
4. Enter your password.  
The Parental Setup screen appears.  
CREATE PASSWORD  
If you have forgotten your password, see Forgot  
Password in the Troubleshooting Guide.  
Enter Password  
PASSWORD CHECK  
-
-
-
-
Enter Password  
RETURN  
0 ~ 9  
-
-
-
-
RETURN  
0 ~ 9  
ENG-28  
ENG-29  
 
Troubleshooting  
Specifications  
Before requesting service (troubleshooting), please check the following.  
Power Requirements  
AC 110~240 V, 50/60 Hz  
Power Consumption  
Weight  
12 W  
Action  
Problem  
Page  
1.8 Kg  
General  
Check the batteries in the remote. They may need replacing.  
Operate the remote control at a distance of no more than 20 feet.  
Remove batteries and hold down one or more buttons for several  
minutes to drain the microprocessor inside the remote to reset it.  
Reinstall batteries and try to operate the remote again.  
Dimensions  
430mm (W) X 207mm (D) X 46mm (H)  
+5°C to +35°C  
No operations can be  
performed with remote.  
Operating Temperature Range  
Operating Humidity Range  
P3  
10 % to 75 %  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time  
(Single Sided, Single Layer Disc) : 135 min.  
DVD  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
Disc does not play.  
P5  
(DIGITAL VERSATILE DISC)  
5.1 channel sound is not  
being reproduced.  
5.1 channel sound is reproduced only when the following condi-  
tions are met. :  
1) The DVD player is connected with the proper amplifier  
2) The disc is recorded with 5.1 channel sound.  
Check whether the disc being played has the Dolby 5.1 chmark  
on the outside.  
CD : 12Cm  
(COMPACT DISC)  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Disc  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
CD : 8Cm  
(COMPACT DISC)  
P9  
Check if your audio system is connected and working properly.  
In a SETUP Menu, is the Audio Output set to Bitstream?  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min. (Video + Audio)  
P26  
VCD : 12Cm  
The  
screen.  
icon appears on  
The features or action cannot be completed at this time because:  
1. The DVDs software restricts it.  
1 channel : 1.0 Vp-p (75 load)  
Composite Video  
Y : 1.0 Vp-p (75 load)  
Pr : 0.70 Vp-p (75 load)  
Pb : 0.70 Vp-p (75 load)  
2. The DVDs software doesnt support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. Youve requested a title or chapter number or search time that  
is out of range.  
P11  
Video  
Component Video  
Output  
Luminance Signal : 1.0 Vp-p (75 load)  
Chrominance Signal : 0.3 Vp-p (75 load)  
Disc Menu doesnt appear.  
Check if the disc has a Menu.  
S-Video  
2 channel  
Play mode differs from the  
Setup Menu selection.  
Some of the functions selected in the Setup Menu may not work  
properly if the disc is not encoded with the corresponding function.  
L(1/L), R(2/R)  
P23~29  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
*Frequency Response  
The screen ratio cannot  
be changed.  
Audio  
The Screen Ratio is fixed on your DVDs.  
P27  
P26  
Output  
*S/N Ratio  
110 dB  
100 dB  
0.004 %  
Make sure you have selected the correct Digital Output in the  
Audio Options Menu.  
No audio.  
*Dynamic Range  
*Total Harmonic Distortion  
The screen is blocked  
Press power on from a cold start with no disc in the unit. Press the  
STOP (  
) and PLAY (  
) buttons simultaneously on the front  
P28~29  
P28~29  
*: Nominal specification  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Forgot password  
Press power on from a cold start with no disc in the unit. Press the  
STOP (  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Press the MENU button, and then press DOWN button to select  
the Parental Setup. The Parental Setup is now unlocked as  
indicated on the display. You can change your password.  
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
) and PLAY (  
) buttons simultaneously on the front  
Weight and dimensions are approximate.  
Go to the contents and find the section of the instruction book that  
contains the explanations regarding the current problem, and follow  
the procedure once again.  
If the problem still cannot be solved, please contact your nearest  
authorized service center.  
If you experience other  
problems.  
ENG-30  
ENG-31  
 

Radio Shack Conference Phone 17 908 User Guide
Radio Shack Handheld Game System 60 2716 User Guide
Radio Shack Motorized Toy Car 60 4349 User Guide
Raypak Electric Heater Finned Water Tube Water Heaters User Guide
RCA CD Player RCD030 User Guide
RCA Clock Radio BRC10 User Guide
RCA VCR VR628HF User Guide
Ricoh Printer 1764 User Guide
Seagate Computer Hardware ST19171FC User Guide
Sears Water System 3902521 User Guide