RCA MP3 Docking Station RC60i User Guide

v1.0 (1.0.1.0) (EN/F)  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
IMPORTANT SAFETY INSTRUCTIONS  
recharged, do not incinerate, and  
do not puncture.  
Only use attachments/accessories  
specified by the manufacturer.  
Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer, or sold with  
the apparatus. When a cart is used,  
use caution when moving the cart/  
apparatus combination to avoid  
injury from tip-over.  
The AC/DC adapter supplied with  
this product is intended to be  
correctly oriented in a vertical or  
floor mount position.  
Some of the following information may  
not apply to your particular product;  
however, as with any electronic product,  
precautions should be observed during  
handling and use.  
Technical information  
Product: Clock Radio  
Brand: RCA  
user manual  
guide de l’utilisateur  
Non-rechargeable batteries, such as  
alkaline batteries, may leak if left in  
your product for a long period of  
time. Remove the batteries from the  
product if you are not going to use  
it for a month or more.  
If your product uses more than one  
battery, do not mix types and make  
sure they are inserted correctly.  
Mixing types or inserting incorrectly  
may cause them to leak.  
Model: RC60i  
Do not use unauthorized chargers  
or power adapters. Use only  
chargers that came with your  
product or that is listed in the user’s  
guide.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near  
water.  
Electrical consumption  
Power Supply: 120 V ~ 60 Hz  
Power Consumption: 8 Watts  
RC60i  
Unplug this apparatus during  
lightning storms or when unused  
for long periods of time.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus has  
been damaged in any way, such  
as power-supply cord or plug is  
damaged, liquid  
Apparatus shall not be exposed to  
dripping or splashing and no objects  
filled with liquids, such as vases,  
shall be placed on the apparatus.  
Always leave sufficient space around  
the product for ventilation. Do  
not place product in or on a bed,  
rug, in a bookcase or cabinet that  
may prevent air flow through vent  
openings.  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
Connect power cord only to AC  
power source as marked on the  
product.  
Care should be taken so that objects  
do not fall into the product.  
Do not attempt to disassemble  
the cabinet. This product does  
not contain customer serviceable  
components.  
The marking information is located  
at the bottom of apparatus.  
Caution marking is located at  
bottom of apparatus.  
iPhone is a trademark of Apple Inc.  
Clean only with dry cloth.  
iPod is a trademark of Apple Inc.,  
registered in the U.S. and other  
countries.  
Do not block any ventilation  
openings. Install in accordance with  
the manufacturer’s instructions.  
Do not install near any heat sources  
such as radiators, heat registers,  
stoves, or other apparatus (including  
amplifiers) that produce heat.  
Do not defeat the safety purpose  
of the polarized or grounding-type  
plug. A polarized plug has two  
blades with one wider than the  
other. A grounding type plug has  
two blades and a third grounding  
prong. The wide blade or the third  
prong is provided for your safety. If  
the provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete  
outlet.  
This equipment is a Class II  
or double insulated electrical  
appliance. It has been designed  
in such a way that it does not  
require a safety connection to  
electrical earth.  
Discard any leaky or deformed  
battery immediately. They may  
cause skin burns or other personal  
injury.  
Apple is not responsible for the  
operation of this device or its  
compliance with safety and regulatory  
standards.  
Please help to protect the  
environment by recycling or  
disposing of batteries according to  
federal, state, and local regulations.  
has been spilled  
]
or objects have  
fallen into the  
apparatus, the  
apparatus has  
Plugging in for power  
AC OUTLET POWER SUPPLY:  
120 V ~ 60 Hz  
“Made for iPod” means that an  
electronic accessory has been designed  
to connect specifically to iPod and has  
been certified by the developer to meet  
Apple performance standards.  
Ecology  
Portable Cart Warning  
been exposed to  
Help protect the environment - we  
recommend that you dispose of used  
batteries by putting them into specially  
designed receptacles.  
rain or moisture,  
does not operate normally, or has  
been dropped.  
Power is fed to the unit even  
when it is not functioning. To  
cut the power supply off, the  
power cable must be unplugged.  
“Works with iPhone” means that an  
electronic accessory has been designed  
to connect specifically to iPhone and has  
been certified by the developer to meet  
Apple performance standards.  
ADDITIONAL SAFETY  
INFORMATION  
For your records  
In the event that service should be  
required, you may need the model  
number and the serial number. In the  
space below, record the date and place  
of purchase and the serial number:  
Model No.:  
Date of Purchase:  
Place of Purchase:  
Serial No.:  
Main plug is used as disconnect  
device and it should remain readily  
operable during intended use. In  
order to disconnect the apparatus  
from the mains completely, the  
mains plug should be disconnected  
from the mains socket outlet  
completely.  
Protect the power cord from being  
walked on or pinched particularly at  
plugs, convenience receptacles, and  
the point where they exit from the  
apparatus.  
Important battery  
precautions  
Any battery may present a risk of  
fire, explosion, or chemical burn  
if abused. Do not try to charge a  
battery that is not intended to be  
EN/F  
It is important to read this user manual prior to using your new product for the first time.  
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit  
pour la première fois.  
Before you begin  
FCC information  
General controls  
Side view  
FCC information  
Modifications not expressly approved  
by the party responsible for compliance  
could void the user’s authority to  
operate the equipment.  
Plugging in for power  
Insert the plug of the unit into an AC  
power outlet.  
To install or replace the batteries:  
1. Remove battery compartment door  
(located at the bottom of the radio)  
by applying thumb pressure to the  
tab on battery door and then lift  
the door out and off the cabinet.  
Front view  
Sound source selection  
with light indicators  
Alkaline (NEDA 1604A/  
IEC 6LR61) battery is  
recommended. Carbon-zinc  
This equipment has been tested and  
found to comply with the limits for  
a Class B digital device, pursuant to  
Part 15 of FCC Rules. These limits  
are designed to provide reasonable  
protection against harmful interference  
in a residential installation. This  
Adjust  
volume  
Off (standby mode)  
Display  
battery may be used but memory  
holding time will be substantially  
reduced. Memory holding time  
for a fresh alkaline battery is  
approximately 8 hours (if radio  
or alarm are not operated) which  
should take care of short, nuisance-  
type AC power failures. To preserve  
battery life, the unit should remain  
plugged into an AC outlet. As the  
battery gets older, its voltage drops  
and memory may be lost. Be sure  
to replace the battery periodically.  
Battery should be removed if the  
unit will be stored for more than  
one month. Leaky battery can  
badly damage the clock radio.  
Refer to the “Clock” section and  
follow the instructions to get the  
clock time shown correctly with the  
Auto Clock set feature.  
This Class B digital apparatus  
complies with Canadian ICES-003.  
Cet appareil numérique de la class  
B est conforme à la norme NMB-003  
du Canada.  
equipment generates, uses, and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
Battery back-up operation  
This clock radio is equipped with a  
memory holding system that can be  
powered with 9V battery. The power  
failure protection circuit will not  
Illustrations contained within this  
publication are for representation only  
and subject to change.  
However, there is no guarantee  
that interference will not occur in a  
particular installation. If this equipment  
does cause harmful interference to  
radio or television reception, which  
can be determined by turning the  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of the  
following measures:  
Rear view  
operate unless battery is installed. When  
normal household power is interrupted,  
or AC line cord is unplugged, the  
batteries will power the clock radio to  
keep track of time and alarm settings  
programmed into memory. When the  
battery backup functions, the digital  
display will not light, however, the  
function of alarm still occurs during the  
power interruption if remaining battery  
power is adequate. Normal operation  
will resume after AC power is restored  
so you will not have to reset the time or  
the alarm.  
2. Insert or replace a 9V battery (not  
included).  
AM loop  
antenna socket  
The descriptions and characteristics  
given in this document are given as  
a general indication and not as a  
guarantee. In order to provide the  
highest quality product possible,  
we reserve the right to make any  
improvement or modification without  
prior notice.  
3. Replace the compartment door.  
Universal dock for iPod/iPhone  
(push to open or close)  
It is recommended to plug the  
unit for AC power while replacing  
batteries to avoid the loss of clock  
and wake time/mode settings.  
Reorient or relocate the receiving  
antenna.  
Power failure indicator  
When AC power is interrupted  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an  
outlet on a circuit different from  
that to which the receiver is  
connected.  
(disconnected) for a short period of  
time, both time and alarm settings  
will change (unless batteries are  
installed). After AC power is restored  
(reconnected), the Digital Display  
will blink to indicate that power was  
interrupted and you should readjust the  
time and alarm settings.  
AM loop antenna socket – Connect to  
the AM loop antenna  
Consult the dealer or an  
experienced radio/TV technician for  
help.  
AUX IN – Auxiliary input jack  
Clock  
General controls  
Radio  
iPod/iPhone  
Top view  
Listening to the radio  
To turn on or off radio:  
1. Press RADIO on the front of the  
unit to turn on the radio.  
Station presets  
Works with:  
Listening to iPod/iPhone  
To connect iPod/iPhone:  
1. Push the universal dock for iPod on  
Setting clock  
To control the playback:  
1. During playback, press iPod to  
pause the playback and press again  
to resume.  
iPhone 3GS 16GB, 32GB  
iPhone 3G 8GB, 16GB  
To store a station as preset:  
1. Tune to a radio station.  
1. Press SET on the top of the unit  
until the clock setting icon  
flashes on the display.  
the right of the unit to open it.  
Made for:  
The radio mode icon (  
the display.  
) lights on  
2. Press STORE.  
iPod touch 2nd generation 8GB,  
16GB, 32GB  
iPod touch 1st generation 8GB,  
16GB, 32GB  
iPod nano 5th generation 8GB  
or 16GB  
iPod nano 4th generation  
(video) 8GB, 16GB  
iPod nano 3rd generation  
(video) 4GB, 8GB  
An available preset location  
(e.g. ) shows on the display.  
2. Place the appropriate adapter  
provided with your iPod/iPhone and  
then place your iPod/iPhone on the  
universal dock for iPod/iPhone.  
2. Press << or >> to skip to the  
previous or next file.  
2. Press << or >> on the top of the  
unit to set the clock time. The time  
decrements or increments follow by  
a faster rate when you press and  
hold the button.  
2
3
4
5
2. Press OFF to turn off the radio, or  
press AUX or iPod to select another  
sound mode.  
Press and hold << or >> to search  
backward or forward on the current  
playback content.  
8
8
7
10  
3. Press << or >> (or RECALL) to select  
a desired preset location (01 - 20).  
6
11  
9
To select radio band:  
To select iPod mode:  
The clock setting icon  
flashes  
In radio mode, press RADIO to  
select the radio band (AM/FM).  
The selected radio band icon lights  
on the display.  
4. Press STORE.  
Press iPod on the front of the unit  
to select the iPod mode.  
The iPod mode icon ( ) lights on  
the display.  
Playback from the iPod/iPhone starts  
automatically.  
If no iPod/iPhone is connected  
in the iPod mode, the unit will  
exit the iPod mode and turn off  
automatically.  
3. Press SHUFFLE to play the files in  
random order in the iPod/iPhone.  
Press again to cancel the function  
(shows on the iPod/iPhone display).  
when you are setting the time. AM  
or PM icon also lights beside the  
time.  
1
shows on the display as  
confirmation.  
You can save up to 20 preset  
stations.  
1.  
SNOOZE – Turn off the wake function momentarily; turn off the sleep  
iPod classic 80GB, 160GB  
iPod nano 2nd generation  
(aluminum) 2GB, 4GB, 8GB  
iPod nano 1GB, 2GB or 4GB  
iPod 5th generation (video)  
30GB, 60GB, 80GB  
function  
To tune frequency:  
4. Press REPEAT to select a repeat  
playback mode (repeat 1 or repeat  
all). Press REPEAT until no repeat  
mode is selected (shows on the  
iPod/iPhone display) to cancel the  
repeat playback.  
Press << or >>. The selected  
To recall a preset station:  
1. In radio mode, press RECALL.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
REPEAT – Select repeat playback mode for iPod/iPhone  
SLEEP – Refer to “Sleep function”  
frequency shows on the display.  
Press and hold to automatically  
search for the next available station.  
The existing preset station number  
shows on the display.  
3. To save and exit the clock setting,  
wait for about 5 seconds or press  
SET until the clock setting icon (  
) is off and the wake setting icons (  
iPod mini 4GB, 6GB  
BRIGHTNESS – Adjust display brightness  
RECALL – Recall preset radio stations  
SHUFFLE – Select random playback mode for iPod/iPhone  
WAKE 1 – Activate or change Wake 1 settings  
iPod 4th generation 40GB  
iPod 4th generation (color  
display) 20GB, 30GB, 40GB, 60GB  
2. Press << or >> (or RECALL) to select  
a desired preset station.  
Antenna  
To charge the iPod/iPhone:  
/
/
or  
/
/
) are either  
Built-in AFC  
You may charge the battery of your  
iPod/iPhone through the universal  
dock for iPod while the unit is  
turned off (standby mode) or in  
the AUX, Radio (FM band only) or  
iPod mode. Charging control should  
be operated on the iPod/iPhone. It  
is not necessary to charge in iPod  
mode, unless you are listening to  
the iPod.  
off or stop flashing.  
The Built-in Automatic Frequency  
Control (AFC) works only on FM. It helps  
reducing drift on FM reception and  
keeping the radio locked in on the FM  
station to which it is tuned.  
<< or >> – Search radio frequencies; skip or search music file in iPod/iPhone;  
adjust clock time and wake time  
AM Antenna  
For AM reception, connect the AM  
antenna loop to the back of the radio.  
Stretch out the antenna cord to its  
fullest length and rotate the antenna  
for better reception.  
9.  
SET – Enter setting mode for setting clock time, Wake 1 time or Wake 2 time  
10. WAKE 2 – Activate or change Wake 2 settings  
11. STORE – Save radio stations as presets  
Auxiliary source  
Sleep function  
Display brightness  
Wake function  
To select auxiliary mode:  
In the sleep mode, the radio, iPod or  
AUX mode can be set to operate for a  
certain period of time before turning  
off automatically.  
the iPod mode is selected but  
without an iPod/iPhone connected.  
Adjust the volume to your desired  
level.  
Press OFF to turn off the unit.  
Select the wake source  
You may be woken up by the alarm,  
radio, or music from iPod/iPhone.  
1. Set a wake time (refer to the above  
instructions).  
Set wake time  
Press BRIGHTNESS to dim the display  
and press again to restore to the  
original brightness level.  
Turn off the wake  
1. Connect your auxiliary source (e.g.  
mp3 player) to the AUX input jack  
at te back of the unit with an audio  
cable (not supplied).  
This unit allows 2 wake times to be set.  
1. Press SET on the top of the unit  
function  
To silence the wake function  
momentarily:  
To listen to the auxiliary player:  
until a WAKE 1 icon (  
) or a WAKE 2 icon (  
flashes on the display.  
,
or  
or  
If an auxiliary player (e.g. mp3  
player) is connected, press AUX to  
select AUX mode and start playback  
on your auxiliary player.  
If Waking to iPod/iPhone (  
selected:  
,
) is  
,
)
Press SNOOZE. The alarm will sound  
again when the snooze period  
is over. The snooze period is 9  
minutes.  
To set the sleep time:  
2. Press AUX to turn on the unit or to  
switch to listen to AUX from other  
modes.  
1. Press SLEEP repeatedly to cycle  
among the sleep time available  
(90min, 60min, 30min, 15min and  
OFF. The sleep time is default to 90  
min).  
Adjust the volume to your desired  
level. The last played file on the  
iPod/iPhone will be played when the  
wake function activates.  
2. Press WAKE 1 or WAKE 2 to select  
a wake mode. Corresponding icon  
lights on the front of the unit.  
– Wake 1 by alarm  
2. Press << or >> on the top of the  
unit to set the wake time. The time  
decrements or increments follow by  
a faster rate when you press and  
hold the button.  
The auxiliary mode icon (  
lights on the display.  
)
OR  
To change or check the remaining  
time in sleep mode:  
Press SLEEP once to check the  
remaining sleep time. Press SLEEP  
repeatedly to select another sleep  
time.  
To stop the wake function:  
Press OFF to turn off the unit.  
– Wake 1 by radio  
– Wake 1 by iPod/IPhone  
– Wake 2 by alarm  
– Wake 2 by radio  
– Wake 2 by iPod/IPhone  
Press OFF. The alarm will be on  
The icon  
flashes while selecting.  
Adjust the auxiliary player to mid-  
range volume and adjust the master  
volume on the unit. Do not turn  
the volume of the auxiliary player  
too high as this may affect the  
sound quality. For other playback  
operations, control them on your  
auxiliary player.  
again the following day at the same  
time.  
OR  
Note: If there is no iPod/iPhone  
connected, the alarm tone will sound  
instead even if Waking to iPod mode  
is selected.  
2. When the desired sleep time is  
selected, release SLEEP and wait for  
about 5 seconds, the sleep time is  
now set.  
To disable the wake function  
completely:  
To cancel the sleep mode:  
If Waking to Alarm (  
,
) is  
The icon  
lights on the display.  
If you decide to turn off the unit  
sooner, press SNOOZE, OFF or press  
SLEEP repeatedly to select “OFF”.  
selected:  
3. To save and exit the wake setting,  
wait for about 5 seconds or press  
SET until the clock setting icon (  
) is off and the wake setting icons (  
Press WAKE 1 or WAKE 2  
Wake to Alarm uses GRAD-U-  
When the wake  
function activates, the  
corresponding wake  
icon will flash until the wake  
function is turned off. The icon  
will then stop flashing and keep  
lighting up.  
When the AC power is  
disconnected, all wake mode will  
be reverted to alarm tone.  
repeatedly until no corresponding  
To listen to the radio:  
WAKE, a gentle increase to the  
maximum alarm tone volume over  
30 to 45 seconds.  
wake icon (  
,
,
or  
,
,
)
The radio turns on by default. If  
not, press RADIO and select a radio  
station as usual.  
shows on the display.  
/
/
or  
/
/
) are either  
If you set the wake function with  
low volume level before going  
to bed, we advise using Waking  
to Alarm mode to wake you up  
since the volume will automatically  
increase.  
off or stop flashing.  
To check the wake time after  
To listen to the iPod/iPhone:  
setting, press SET until a WAKE  
Press iPod and then press << or >>  
to select a file on the iPod/iPhone.  
Playback will be in repeat all files  
mode automatically.  
If iPod mode is selected in your last  
sleep mode setting, the iPod/iPhone  
will start to play, instead of the  
radio.  
1 icon (  
icon (  
/
/
) or WAKE 2  
) flashes and  
/
/
the respective assigned wake time  
shows on the display.  
If Waking to RADIO (  
,
) is  
selected:  
Select a desired wake up radio  
channel (refer to “Listening to the  
radio”). If no wake up channel is  
set, your last listening radio station  
will be selected.  
The radio will be played whenever  
Warranty information  
ANY OTHER WARRANTY. No person or  
representative is authorized to assume  
for the Company any liability other than  
expressed herein in connection with the  
sale of this product.  
covered by the warranty.  
A new or refurbished unit will be  
shipped to you freight prepaid.  
cards, speakers, accessories, computers,  
computer peripherals, other media  
players, home networks or vehicle  
electrical systems.  
will be returned with factory  
Limited warranty  
12 Month Limited Warranty  
Applies to RCA Audio/Video  
Products  
default settings, and without any  
pre-loaded content which may have  
been installed in the originally  
purchased products. Consumer will  
be responsible for reloading data  
and content. Consumer will be  
responsible to restore any personal  
preference settings.  
Properly pack your unit. Include  
any remotes, memory cards, cables,  
etc. which were originally provided  
with the product. However DO NOT  
return any removable batteries,  
even if batteries were included  
with the original purchase. We  
recommend using the original  
carton and packing materials.  
Include evidence of purchase date  
such as the bill of sale. Also print  
your name and address and a  
description of the defect. Send via  
standard UPS or its equivalent to:  
What we will do:  
Provide you with a new, or at our  
option, a refurbished unit. The  
exchange unit is under warranty for  
the remainder of the original product’s  
warranty period.  
This Warranty does not apply to any  
product or part thereof which, in the  
opinion of the Company, has suffered  
or been damaged through alteration,  
improper installation, mishandling,  
misuse, neglect, accident, or by removal  
or defacement of the factory serial  
number/bar code label(s). THE EXTENT  
OF THE COMPANY’S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO THE  
REPAIR OR REPLACEMENT PROVIDED  
ABOVE AND, IN NO EVENT, SHALL THE  
COMPANY’S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER  
FOR THE PRODUCT.  
AUDIOVOX ELECTRONICS CORP. (the  
Company) warrants to the original retail  
purchaser of this product that should  
this product or any part thereof, under  
normal use and conditions, be proven  
defective in material or workmanship  
within 12 months from the date of  
original purchase, such defect(s) will be  
repaired or replaced with reconditioned  
product (at the Company’s option)  
without charge for parts and repair  
labor.  
Some states do not allow limitations on  
how long an implied warranty lasts or  
the exclusion or limitation of incidental  
or consequential damage so the above  
limitations or exclusions may not apply  
to you. This Warranty gives you specific  
legal rights and you may also have  
other rights which vary from state to  
state.  
For Canada Customers, please ship  
to:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
L5T 3A5  
How to make a warranty claim:  
If your product is capable of storing  
content (such as an mp3 player,  
digital voice recorder, etc), it is  
recommended to make periodic  
backup copies of content stored  
on the product. If applicable,  
To obtain repair or replacement  
within the terms of this Warranty, the  
product is to be delivered with proof  
of warranty coverage (e.g. dated bill  
of sale), specification of defect(s),  
transportation prepaid, to the Company  
at the address shown below.  
This Warranty is in lieu of all other  
express warranties or liabilities. ANY  
IMPLIED WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY OF  
before shipping a product, make  
a back up copy of content or data  
stored on the device. Also, it is  
advisable to remove any personal  
content which you would not want  
exposed to others. IT IS LIKELY  
THAT CONTENTS AND DATA ON  
THE DEVICE WILL BE LOST DURING  
SERVICE AND REFORMATTING.  
AUDIOVOX ACCEPTS NO LIABILITY  
FOR LOST CONTENT OR DATA,  
OR FOR THE SECURITY OF ANY  
PERSONAL CONTENT OR DATA ON  
THE RETURNED DEVICE. Product  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd.  
Hauppauge N.Y. 11788  
1-877-833-3491  
MERCHANTABILITY, SHALL BE LIMITED  
TO THE DURATION OF THIS WRITTEN  
WARRANTY. ANY ACTION FOR BREACH  
OF ANY WARRANTY HEREUNDER  
INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY MUST BE  
BROUGHT WITHIN A PERIOD OF 24  
MONTHS FROM DATE OF ORIGINAL  
PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY  
This Warranty does not extend to the  
elimination of externally generated  
static or noise, to correction of  
antenna problems, loss/interruptions of  
broadcast or internet service, to costs  
incurred for installation, removal or  
reinstallation of product, to corruptions  
caused by computer viruses, spyware or  
other malware, to loss of media, files,  
data or content, or to damage to tapes,  
discs, removable memory devices or  
Insure your shipment for loss or  
damage. Audiovox accepts no  
liability in case of damage or loss en  
route to Audiovox.  
Pay any charges billed to you by  
the Exchange Center for service not  
Audiovox Electronics Corp.  
150 Marcus Blvd., Hauppauge, NY 11788  
©2010 Audiovox Electronics Corp.  
Trademark(s) ® Registered  
CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR  
Printed in China  
 

Radio Shack Mouse 26 751 User Guide
RCA CRT Television F27648 User Guide
RCA Flat Panel Television HD44LPW165 User Guide
RF Link Technology Security Camera AWS 5832 VSR User Guide
Ryobi Saw CSB120 User Guide
Samsung Digital Camera 3000 User Guide
Samsung Digital Camera WB2014F User Guide
Samsung Home Theater System HT DS660 User Guide
Scag Power Equipment Lawn Mower SW32 14BV User Guide
Schneider Electric Marine Instruments EM400 User Guide