ꢒꢓꢐꢋꢔꢆꢍꢕꢖꢗꢘꢗꢙꢙꢆꢚꢛꢜꢝꢛꢆꢊ !ꢕ"#ꢘꢆꢐꢛ$ꢙꢗ
OWNER’S MANUAL —
Please read before using this equipment.
26-751
ꢆꢇꢐꢑꢊꢄꢂꢁ ꢂꢆ
ꢎ
ꢎ
• Keep your previous mouse installed as a
back-up until you finish installation.
USB to PS2 Adapter — Lets you use
your mouse with computer either with
Receiver
PS2 or USB connector.
• Do not use the mouse on a desk made of
glass, mirror, iron, or black velvet. A flat
surface is necessary or the optical sensor will
not work.
USB Connector
• For optimal performance, place the receiver
at least 8 inches (20 centimeters) away from
other electrical devices, such as the
LED — Flashes red when
battery power weakens.
Receiver Antenna
computer, the computer monitor, speakers,
or other external storage drives.
Scroll Wheel — Lets you scroll and
select quickly and easily.
• For normal transmit distance, avoid using this
device on a metal surface because a large
surface of iron, aluminum, copper or other
metal will be a shielding or ground to the
mouse’s RF antenna and receiver.
LED — Lights green when
the mouse is moved.
Mouse
Thank you for purchasing the Compaq
27MHz Wireless Combo Optical Mouse.
Your mouse’s advanced RF (Radio
connect the PS2 connector to the PS2
port.
• If your notebook computer has a metal
(contains aluminum or magnesium) case, the
LCD panel’s metal housing will isolate partial
power of the RF signal from the mouse. This
will result in reducing the transmitting
distance when you connect the receiver on
the back of the LCD panel; however, your
mouse should work properly while using it
beside your notebook computer.
Frequency) technology enables 360°
operation. Its optical sensing technology
creates precise, smooth movement, with no
moving parts to clean or replace. You do not
need to aim at the receiver when using the
mouse. The 5-button design lets you assign
button functions and use your mouse with
other computer accessories. The supplied
driver CD provides customized functions for
operation with Windows.
USB
PS2
Mꢆ ꢊꢂꢃꢈꢆMꢆ
System Requirements
Hardware — IBM PC or compatible with one
available USB or PS/2 port and a CD drive.
3. Turn on your computer.
ꢀꢁꢂꢂꢃꢄꢅꢆ
ꢇ ꢈꢂꢁꢉꢉꢁꢂꢇꢊ
1. Remove the
battery
Software — Microsoft Windows 95, Windows
98, Windows 2000, Windows ME, or Windows
XP.
4. Press the channel button on the back of
the receiver. Then press the channel
button on the back of the mouse to
activate it.
Battery Installation
• When the mouse battery power weakens,
the red LED on the receiver flashes and the
eyes of flash red.
compartment
cover from the
back of the
mouse. M
Back of receiver
• You need to set the channel every time you
replace the batteries. See “Hardware
Installation”.
2. Insert two AA
batteries (not
supplied).
Channel Buttons
Hardware Installation
• Always turn off your computer before you
connect or disconnect your mouse unless
you are using a USB device with Windows
98 or above.
3. Replace the
battery compartment cover.
• You can only set up one wireless optical
mouse at a time. If you have additional
wireless optical mouse sets within 10 square
meters, interference occurs between the
receiver and your mouse. Relocate the
mouse beyond this distance.
ꢋꢁꢄꢌꢍꢁꢄꢃꢆ
ꢇ ꢈꢂꢁꢉꢉꢁꢂꢇꢊ
Back of mouse
1. Turn off your computer.
M
ꢎꢆ
5. If interference becomes a problem,
press both channel buttons again to
change channels.
2. If your computer has a USB port,
connect the receiver’s USB connector
to the USB port.
ꢈꢊꢏꢂꢍꢁꢄꢃꢆ
ꢇ ꢈꢂꢁꢉꢉꢁꢂꢇꢊ
1. Make sure the mouse receiver is
connected to the computer.
If your computer’s mouse port is a PS2
type, connect the USB to PS2 adapter
to the receiver’s USB connector. Then
ꢆꢇꢐꢑꢊꢄꢂꢁ ꢂꢆ
ꢎ
ꢎ
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by
RadioShack Corporation.
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon
for pertinent information.
— Important
M — Note
ꢎ
ꢈꢗ!!ꢕ)(ꢙꢆꢂ#ꢝ
ꢃ#ꢙ,ꢆ-$ꢜ ꢆ
Mꢆ ꢊꢂꢃꢆMꢆ
• Some panels in Easy Jump may appear gray
(disabled). This is because your application
software does not support those functions.
Click Easy Jump Options on the Settings
Tab. The Easy Jump Options dialog box
appears.M
• The browser in which each option is
available is listed to the right. If no browser is
listed, that option is available in both Internet
Explorer and Netscape.
From here you can select wireless mouse
options for the Internet, such as Open
Browser, Add to Favorites (Internet
Explorer), Organize Favorites (Internet
Explorer), Add Bookmark (Netscape), and
so forth. M
The Button Assignments function lets you
assign mouse button functions to your liking.
1. — This is the left, or default click button.
2. — You can assign this button for
If you assign one of your mouse buttons as
Easy Jump, whenever you press the
assigned button, this graphic appears. You
can then perform the functions as listed
below.
frequently used keyboard and mouse
functions, in addition to features like Easy
Jump, Auto-Panning, Zoom, and so forth.
3. — You can assign this button for
frequently used keyboard and mouse
functions, in addition to features like Easy
Jump, Auto-Panning, Zoom, and so forth.
Move the mouse, and the document moves
in the same direction.
Close the application you are using.
Moves the cursor to the
horizontal scroll bar.
Opens the mouse
Control Panel (Mouse
Properties dialog box).
4. and 5. — You can assign certain
functions to the left and right side buttons.
Moves the cursor to
the vertical scroll bar.
Side + Roller 4+ and 5+ — Assign functions
so that when you press a side button and
move the scroll wheel, you can perform the
following functions:
Opens the mouse’s Help
menu.
Activates the Windows
Start menu.
Opens your web browser.
Application Switch / Document Switch
ꢁꢝꢛ$!ꢆꢂ#ꢝ
Quickly switch from one open application or
document to another without moving the
mouse. To switch to another application or
document, press a side button and the scroll
wheel to select that application or
document.
Horizontal Scroll
Scroll horizontally through a document by
pressing a side button and the scroll wheel.
Last<Back> / Next<Forward>
Quickly switch from one page to another
(backward or forward) by pressing a side
button and the scroll wheel.
This tab lists the product, version, and
copyright information.
Zoom In/Out
Press a side button and the scroll wheel to
zoom in or out while viewing a document.
Mode
Office Mode — For use with Microsoft Office
applications. It is similar to Microsoft’s
IntelliMouse.
Scroll Mouse Mode — For use with any
other application that uses scrollbars. This
includes Zoom (Office and Internet Explorer)
and Auto-Panning (Easy Jump).
3
ꢍꢕꢖꢗꢘꢗꢙꢙꢆꢂ#ꢝ
Mꢆ ꢊꢂꢃꢆMꢆ
Troubleshooting
Your mouse is optical, and does not use a ball.
You do not need to clean the mouse like a ball-
type mouse.
Care
ꢂꢋꢃꢆꢏꢚꢚꢆꢍꢁ ꢂꢈꢆꢅꢊ%ꢆ
ꢂꢊꢆ/ ꢊꢍ
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Keep the mouse dry; if it gets wet, wipe it dry
immediately. Use and store the mouse only in
normal temperature environments. Handle the
mouse carefully; do not drop it. Keep the
mouse away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.
Service and Repair
If your mouse is not performing as it should,
take it to your local RadioShack store for
assistance. To locate your nearest
RadioShack, use the store locator feature on
RadioShack's website (www.radioshack.com),
or call 1-800-The Shack (843-7422) and follow
the menu options. Modifying or tampering with
the mouse's internal components can cause a
malfunction and might invalidate its warranty
and void your FCC authorization to operate it.
This tab includes suggestions for mouse
use, placement, and mouse battery status.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
&ꢊꢊꢐꢆꢏ% ꢚꢂꢇꢊ ꢆꢏꢊꢄꢆꢊꢏꢏꢇꢚꢃꢆ
ꢁ ꢌꢆꢇꢃꢆꢁꢑꢑꢉꢇꢚꢁꢂꢇꢊ ꢈ
Press Ctrl and move the scroll wheel forward
or backward to zoom in or out. You can also
zoom in or out by setting the right button as
the “Ctrl” function. Then press the right
button and move the scroll wheel forward or
backward to zoom in or out.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Consult your local RadioShack store or an experienced
radio/TV technician for help.
If you cannot eliminate the interference, the FCC
requires that you stop using your mouse.
If the trouble is affecting the telephone lines,
the phone company can ask you to disconnect
your mouse until you have resolved the
problem.
Changes or modifications not expressly approved by
RadioShack may cause interference and void the user’s
authority to operate the equipment.
ꢚꢉꢊꢈꢇ 'ꢆꢂꢋꢃꢆꢈꢚꢄꢊꢉꢉꢆꢐꢊ%ꢈꢃꢆ
ꢌꢄꢇ.ꢃꢄ
1. Right clickꢀꢀ, and select Close Scroll
Mouse. The Scroll Mouse Warning
dialog box appears.
ꢂꢄꢊ%ꢀꢉꢃꢈꢋꢊꢊꢂꢇ '
If your mouse is not working as it should,
these suggestions might help you eliminate
the problem. If the mouse still does not
operate properly, take it to your local
RadioShack store for assistance. M
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufactur-
ing defects in material and workmanship under normal use for
ninety (90) days from the date of purchase from RadioShack
company-owned stores and authorized RadioShack franchi-
sees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY
IMPLIED WARRANTIES, INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE, ARE LIMITED IN DURATION TO THE DURATION OF
THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack
SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUS-
TOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
ꢑꢖꢛꢝꢘꢗꢜ
ꢈꢛꢘ$!ꢕꢛ)
Disable the trackball or touch-pad in
your notebook’s BIOS and enable
the external port to use all the
mouse’s functions.
The mouse scrolling
functions do not
work.
2. Click Yes.
3. If you need to use the driver later, click
Start\Programs\Scroll Mouse\Scroll
Mouse Control Panel.
• Make sure the receiver is securely
plugged into your mouse port.
• If the receiver is connected to the
USB port, verify your USB port is
working properly. Look on the
Device Manager of System
Properties. If there is a circled
exclamation point through the icon, it
means there is a problem. Try to
% ꢇ ꢈꢂꢁꢉꢉꢆꢂꢋꢃꢆꢈꢚꢄꢊꢉꢉꢆ
ꢐꢊ%ꢈꢃꢆꢌꢄꢇ.ꢃꢄꢆ
Click Start\Programs\Scroll Mouse, then click
Uninstall.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions
may not apply to you.
The mouse was not remove and re-install it, or contact
detected by my
computer.
your PC manufacturer’s technical
support.
• If the receiver is connected to the
USB port, check the version of your
operating system. If you are not
running Windows 98, 2000, or ME,
update your operating system so the
USB device can be enabled.
• If the receiver is connected to the
USB port, make sure the USB port is
enabled.
In the event of a product defect during the warranty period,
take the product and the RadioShack sales receipt as proof of
purchase date to any RadioShack store. RadioShack will, at
its option, unless otherwise provided by law: (a) correct the de-
fect by product repair without charge for parts and labor; (b) re-
place the product with one of the same or similar design; or (c)
refund the purchase price. All replaced parts and products,
and products on which a refund is made, become the property
of RadioShack. New or reconditioned parts and products may
be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder
of the original warranty period. You will be charged for repair or
replacement of the product made after the expiration of the
warranty period.
This warranty does not cover: (a) damage or failure caused by
or attributable to acts of God, abuse, accident, misuse, im-
proper or abnormal usage, failure to follow instructions, im-
proper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Ser-
vice Facility; (c) consumables such as fuses or batteries; (d)
cosmetic damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation, set-up ser-
vice adjustment or reinstallation.
ꢏꢚꢚꢆꢌꢃꢚꢉꢁꢄꢁꢂꢇꢊ ꢆ
ꢊꢏꢆꢚꢊ ꢏꢊꢄꢐꢇꢂꢅ
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
• Make sure your mouse receiver’s
cable is properly connected to the
correct port.
• Make sure you pushed the channel
buttons on the receiver and the
mouse after installing the mouse.
There is no cursor
on the screen or the
cursor is not
responding to the
mouse’s movement.
Product:
27MHz Wireless Combo
Optical Mouse
Model:
26-751
Responsible Party:
RadioShack
100 Throckmorton
Fort Worth, TX 76102
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor,
Fort Worth, TX 76102
Phone:
817-415-3200
12/99
26-751
03A03
Printed in China
|