12 2.8
CuPS
LItERS
FOOD
PROCESSOR
InStRuCtIOnS anD RECIPES
5KFPCB700a
KitchenAid.com.au
KitchenAid.co.nz
Australia: 1800 990 990
New Zealand: 0800 881 200
Table of Contents
INTRODUCTION
Proof of Purchase & Product Registration.............................................. Inside Front Cover
Food Processor Safety .....................................................................................................2
Important Safeguards.....................................................................................................3
Electrical Requirements ...................................................................................................4
FEATURES AND OPERATION
Food Processor Features..................................................................................................5
Preparing the Food Processor for Use
Before First Use .......................................................................................................6
Work Bowl Assembly...............................................................................................6
Multipurpose Blade and Dough Blade Assembly......................................................7
Using the Food Processor
Before Use...............................................................................................................8
Maximum Liquid Level.............................................................................................8
Turning the Food Processor On and Off...................................................................8
Using the Pulse Control ...........................................................................................8
The 2-Piece Food Pusher..........................................................................................9
Disassembling the Food Processor................................................................................. ꢀ0
CARE AND CLEANING
Cleaning the Food Processor.........................................................................................ꢀꢀ
Troubleshooting............................................................................................................ꢀ2
FOOD PROCESSING TIPS
Using the Multipurpose Blade....................................................................................... ꢀ3
Using the Dough Blade................................................................................................. ꢀ3
Helpful Hints................................................................................................................. ꢀ4
WARRANTY AND SERVICE INFORMATION
®
KitchenAid Household Food Processor Warranty..........................................................ꢀ5
Service Centers..............................................................................................................ꢀ6
How to Arrange for Service after the Warranty Expires..................................................ꢀ6
How to Order Accessories and Replacement Parts.........................................................ꢀ7
ꢀ
Food Processor Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously
injured if you don’t immediately
follow instructions.
DANGER
You can be killed or seriously injured
WARNING
if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
2
ImPorTanT SaFeGUarDS
When using electrical appliances, basic
safety precautions should always be
followed, including the following:
9. Blades are sharp. Handle carefully.
ꢀ0. To reduce the risk of injury, never
place cutting blade or discs on base
without first putting bowl properly
in place.
ꢀꢀ. Be certain cover is securely locked in
place before operating appliance.
ꢀ. Read all instructions.
2. To protect against risk of electrical
shock do not put Food Processor in
water or other liquid.
3. Unplug from the outlet when not in
use, before putting on or taking off
parts, and before cleaning.
ꢀ2. Never feed food by hand. Always
use the food pusher.
ꢀ3. Do not attempt to defeat the cover
interlock mechanism.
4. Avoid contacting moving parts.
5. Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions, or is dropped
or damaged in any manner. Return
appliance to the nearest Authorized
Service Facility for examination, repair,
or electrical or mechanical adjustment.
6. The use of attachments not
recommended or sold by the
manufacturer may cause fire, electric
shock or injury.
ꢀ4. This product is designed for
household use only.
ꢀ5. This appliance is not intended for
use by persons (including children)
with reduced physical sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
7. Do not use outdoors.
ꢀ6. Children should be supervised to
ensure that they do not play with
the appliance.
ꢀ7. Switch off the appliance
and disconnect from supply
8. Keep hands and utensils away
from moving blades or discs while
processing food to reduce the
risk of severe injury to persons or
damage to the Food Processor. A
scraper may be used but must be
used only when the Food Processor
is not running.
before changing accessories or
approaching parts that move in use.
Save TheSe InSTrUCTIonS
3
electrical requirements
model 5KFPCB700a:
WARNING
Volts: 230-240 V.A.C.
Hertz: 50 Hz
noTe: Model 5KFPCB700A has a 3 prong
grounded plug. To reduce the risk of
electrical shock, this plug will fit in an outlet
only one way. If the plug does not fit in the
outlet, contact a qualified electrician. Do not
modify the plug in any way.
Electrical Shock Hazard
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
4
Food Processor Features
12-Cup (2.8 L)
Work Bowl
heavy-Duty Base
2-Piece
Food Pusher
O
|
Pulse
Dough
Blade
Stainless Steel
multipurpose
Blade
Work Bowl
Cover with Tall
Feed Tube
Work Bowl Cover with Tall Feed Tube
Feed tube accommodates long food items
with a minimum of sectioning, so the
entire length of the tube can be filled
with food.
12-Cup (2.8 L) Work Bowl
The durable bowl provides capacity for
large jobs.
Stainless Steel multipurpose Blade
Versatile blade chops, minces, blends,
mixes, and emulsifies in a matter
of seconds.
2-Piece Food Pusher
Pusher moves food through the tall feed
tube smoothly and easily. A small hole in
the bottom of the pusher insert makes it
easy to drizzle oil into ingredients – just
fill the insert with the desired amount of
oil. For smaller items, simply remove the
pusher insert and use the built-in small
feed tube. With the insert removed, the
pusher can also be used as a convenient
4 oz. (ꢀ20 ml) measuring cup.
Dough Blade
The dough blade is specially designed for
mixing and kneading yeast dough.
heavy-Duty Base
The base features the ”O”, “I”, and PULSE
buttons along with the power shaft,
which rotates the blades.
5
Preparing the Food Processor for Use
4. Insert the mulitpurpose blade or
dough blade into the work bowl.
WARNING
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the shaft.
Cut Hazard
5. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the
feed tube and turn the cover to the
right until it locks into place.
Handle blades carefully.
Failure to do so can result in cuts.
Before First Use
Before using your Food Processor for the
first time, wash the work bowl, work bowl
cover, feed tube pusher, and blades either
by hand or in the dishwasher (see “Cleaning
the Food Processor” on page ꢀꢀ).
Work Bowl assembly
ꢀ. Place the Food Processor base on a
dry, level countertop with the controls
facing forward. Do not plug in the
Food Processor until it is completely
assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening over
the power shaft.
noTe: To avoid damage to the work
bowl, do not attach the cover to the work
bowl before the work bowl is locked on
the base.
6. Fit the 2-piece food pusher into the
feed tube.
3. Grasp the work bowl handle and turn
the bowl to the right until it locks
into position.
O
|
Pulse
6
Preparing the Food Processor for Use
WARNING
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
multipurpose Blade and
Dough Blade assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place on
the shaft.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
7. Plug into a proper electrical outlet (see
“Electrical Requirements” on page 4).
noTe: Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on the
base, and the pusher is inserted to the
maximum fill line on the feed tube.
Do not remove the work bowl from the
base without first removing the work
bowl cover. Damage to the work bowl
may result.
7
Using the Food Processor
Turning the Food Processor
on and off
WARNING
ꢀ. To turn on the Food Processor, press
the “I” Button. The Food Processor
will run continuously and the indicator
light will glow.
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
O
|
Pulse
Failure to do so can result in
amputation or cuts.
2. To stop the Food Processor, press
the ”O” Button. The indicator light
will go out and an automatic brake
will stop the action of the blade
within seconds.
3. Wait until the blade comes to a
complete stop before removing the
work bowl cover. Be sure to turn off
the Food Processor before removing
the work bowl cover, or before
unplugging the Food Processor.
noTe: If the Food Processor fails to
operate, make sure the work bowl and
cover are properly locked on the base (see
“Preparing the Food Processor for Use“
starting on page 6).
Before Use
Before operating the Food Processor, be
sure the work bowl, blades, and work
bowl cover are properly assembled on the
Food Processor base (see “Preparing the
Food Processor for Use” starting on page 6).
maximum Liquid Level
This line on the work bowl indicates the
maximum level of liquid (32 oz. [ꢀ.0 L])
that can be processed by the Food
Processor.
Using the Pulse Control
The pulse control allows precise control of
the duration and frequency of processing.
It’s great for jobs which require a light
touch. Just press and hold the PULSE
Button to start processing, and release it
to stop. The indicator light will glow each
time the PULSE Button is pressed.
8
Using the Food Processor
The 2-Piece Food Pusher
To slice or shred small items, insert the
2-piece food pusher into the feed tube,
turn the top of the pusher left or right
to unlock the small pusher, and lift to
remove. Use the small feed tube and
pusher to process small or slender items,
like single carrots or celery stalks. When
not using the small feed tube, be sure to
lock the small pusher into place.
To slowly drizzle oil or liquid into
ingredients, just fill the small pusher with
the desired amount of oil or liquid. A
small hole in the bottom of the pusher will
drizzle the oil or liquid at a constant rate.
To prevent damage to the interlock system,
always store the work bowl and work bowl
cover in the unlocked position when not
in use.
9
Disassembling the Food Processor
5. The multipurpose blade can be
removed from the work bowl before
WARNING
the contents are emptied. The blade
can also be held in place as you
remove food: grasp the work bowl
Cut Hazard
Handle blades carefully.
from the bottom and place one finger
through the center opening to grip the
blade shaft. Then remove food from
the bowl and blade with a spatula.
Failure to do so can result in cuts.
ꢀ. Press the ”O” Button.
2. Unplug the Food Processor before
Disassembling.
3. Turn the work bowl cover to the left
and remove.
4. Turn the work bowl to the left to
unlock it from the base. Lift to remove.
O
|
Pulse
ꢀ0
Cleaning the Food Processor
5. To prevent damage to the interlock
system, always store the work bowl
and work bowl cover in the unlocked
position when not in use.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
ꢀ. Press the ”O” Button.
2. Unplug the Food Processor
before Cleaning.
3. Wipe the base and cord with a warm,
sudsy cloth, and wipe clean with a
damp cloth. Dry with a soft cloth. Do
not use abrasive cleansers or
scouring pads.
O
|
Pulse
4. All the other parts of the Food
Processor are dishwasher safe. Be
sure to load them away from exposed
heating elements in the dishwasher.
If washing the Food Processor parts
by hand, avoid the use of abrasive
cleansers or scouring pads. They may
scratch or cloud the work bowl and
cover. Thoroughly dry all parts
after washing.
6. Wrap the power cord around the
work bowl. Secure the plug by
clipping it to the cord.
7. Dissassembled blades should be stored
out of reach of children.
ꢀꢀ
Troubleshooting
– If the Food Processor still does not
• If your Food Processor should fail
to operate, check the following:
– Make sure the work bowl and work bowl
cover are properly locked on the base.
– See if the Food Processor is plugged
into a proper electrical outlet. If it is,
unplug the Food Processor. Then plug
into the same outlet again.
work, check the fuse or circuit breaker
on the electrical circuit the Food
Processor is connected to and make
sure the circuit is closed.
• If the Food Processor shuts off
while it is running:
– The Food Processor may be overheated.
If the motor exceeds a certain
temperature, it will automatically shut
off to prevent damage. This should
be an extremely rare occurrence. If it
happens, press the ”O” Button and
wait ꢀ5 minutes for the Food Processor
to cool before resuming. If the Food
Processor still refuses to run, wait an
additional ꢀ5 minutes for the Food
Processor to cool.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
If the problem cannot be corrected
with the steps in this section, see the
KitchenAid Warranty and Service section
on pages ꢀ5-ꢀ7.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
ꢀ2
Food Processing Tips
USInG The mULTIPUrPoSe BLaDe
To chop cooked or raw meat, poultry
or seafood:
To chop fresh fruits or
vegetables:
The food should be very cold. Cut in
ꢀ-inch (2.5 cm) pieces. Process up to
ꢀ pound (455 g) at a time to desired size,
using short pulses, ꢀ to 2 seconds each
time. Scrape sides of bowl, if necessary.
Peel, core, and/or remove
seeds. Cut food in ꢀ to
ꢀꢀ⁄2-inch (2.5-3.75 cm) pieces. Process
food to desired size, using short pulses,
ꢀ to 2 seconds each time. Scrape sides of
bowl, if necessary.
To make bread, cookie, or
cracker crumbs:
Break food into ꢀꢀ⁄2 to 2-inch (3.75-5 cm)
pieces. Process until fine. For larger
pieces, pulse 2 to 3 times, ꢀ to 2 seconds
each time. Then process until fine.
To puree cooked fruits and
vegetables (except potatoes):
ꢀ
Add ⁄4 cup (60 ml) liquid from recipe
per cup (235 ml) of food. Process food,
using short pulses, until finely chopped.
Then process continuously until
reaching desired texture. Scrape sides
of bowl, if necessary.
To melt chocolate in a recipe:
Combine chocolate and sugar from recipe
in work bowl. Process until finely chopped.
Heat liquid from recipe. With processor
running, pour hot liquid through the feed
tube. Process until smooth.
To chop dried (or sticky) fruits:
The food should be cold. Add ꢀ⁄
cup (60 ml)
4
flour from recipe per ꢀ⁄2 cup (ꢀ20 ml) dried
fruit. Process fruit, using short pulses,
until reaching desired texture.
To grate hard cheeses, such as
Parmesan and romano:
Never attempt to process cheese that
cannot be pierced with the tip of a sharp
knife. You can use the multi-purpose
blade to grate hard cheeses. Cut cheese
in ꢀ-inch (2.5 cm) pieces. Place in work
bowl. Process, using short pulses, until
coarsely chopped. Process continuously
until finely grated. Pieces of cheese can
also be added through the feed tube
while the processor is running.
To finely chop citrus peel:
With sharp knife, peel colored portion
(without white membrane) from citrus.
Cut peel in small strips. Process until
finely chopped.
To mince garlic or to chop
fresh herbs or small quantities
of vegetables:
With processor running, add food through
the feed tube. Process until chopped. For
best results, make sure work bowl and
herbs are very dry before chopping.
USInG The DoUGh BLaDe
The dough blade is specially
designed for mixing and
kneading yeast dough quickly
To chop nuts or make
nut butters:
and thoroughly. For the best results, do
not knead recipes which use more than
2-3 cups (475-7ꢀ0 ml) of flour.
Process up to 3 cups (7ꢀ0 ml) of nuts to
desired texture, using short pulses,
ꢀ to 2 seconds each time. For a coarser
texture, process smaller batches, pulsing
ꢀ or 2 times, ꢀ to 2 seconds each time.
Pulse more often for finer texture. For
nut butters, process continuously until
smooth. Store in refrigerator.
ꢀ3
helpful hints
7. After removing the work bowl cover,
place it upside down on the counter.
This will help keep the counter clean.
8. To remove the contents of the
work bowl without removing the
multipurpose blade, grasp the
WARNING
Cut Hazard
Handle blades carefully.
work bowl from the bottom and
place one finger through the center
opening to hold the blade in place.
Then remove food from the bowl
and blade with a spatula.
Failure to do so can result in cuts.
ꢀ. To avoid damage to the blade or
motor, do not process food that is so
hard or firmly frozen that it cannot
be pierced with the tip of a sharp
knife. If a piece of hard food, such as
a carrot, becomes wedged or stuck
on the blade, stop the processor and
remove the blade. Gently remove
food from the blade.
2. Do not overfill work bowl. For thin
mixtures, fill work bowl up to
ꢀ
⁄
2
to 2⁄3 full. For thicker mixtures, fill
work bowl up to 3⁄4 full. For liquids, fill
up to the maximum level as described
on page 8. When chopping, the work
bowl should be no more than ꢀ⁄3 to
ꢀ
⁄
2
full.
3. To capitalize on the speed of the
processor, drop ingredients to be
chopped through the feed tube
while the processor is running.
4. When preparing a cake or cookie
batter or quick bread, use the
multipurpose blade to cream fat and
sugar first. Add dry ingredients last.
Place nuts and fruit on top of flour
mixture to prevent overchopping.
Process nuts and fruits, using short
pulses, until blended with other
ingredients. Do not overprocess.
5. Organize processing tasks to
minimize bowl cleanup. Process
dry or firm ingredients before
liquid ingredients.
9. Your Food Processor is not designed
to perform the following functions:
• grind coffee beans, grains, or
hard spices
• grind bones or other inedible
parts of food
• liquefy raw fruits or vegetables
ꢀ0. If any plastic parts should discolor
due to the types of food processed,
clean them with lemon juice.
ꢀꢀ. When storing your Food Processor,
wrap the power cord around the
work bowl. Secure the plug by
clipping it to the cord.
6. To clean ingredients from the
multipurpose blade easily, just empty
the work bowl, replace the lid, and
pulse ꢀ to 2 seconds to spin the
blade clean.
ꢀ4
®
Kitchenaid household
Food Processor Warranty
Length of
Warranty:
Kitchenaid
Will Pay For:
Kitchenaid
Will not Pay For:
australia and new
Replacement parts
A. Repairs when Food
Processor is used for
operations other than
normal household
Zealand:
and repair labor costs
Three years Full Warranty to correct defects
from date of purchase
on the Food Processor.
Ten years Full Warranty
from date of purchase
on the motor.
in materials or
workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center.
food preparation.
B. Damage resulting
from accident,
alterations, misuse,
abuse, or installation/
operation not in
accordance with local
electrical codes.
KITChenaID DoeS noT aSSUme anY reSPonSIBILITY For
InDIreCT DamaGeS.
ꢀ5
Service Centers
In new Zealand:
All service should be handled locally
by an Authorized KitchenAid Service
Center. Contact the dealer from
whom the unit was purchased to
obtain the name of the nearest
Authorized KitchenAid Service Center.
In australia:
Peter McInnes Pty Ltd
PO Box 323
HRMC
Peter McInnes NZ Ltd
PO Box 303
Drury
Aukland
New Zealand
Ph: 0800 88ꢀ 200
Fax: 0800 88ꢀ 300
Email: [email protected]
NSW 23ꢀ0
Australia
Ph: ꢀ800 990 990
Fax: 0249 02650ꢀ
Email: [email protected]
how to arrange for Service
after the Warranty expires
Before calling for service, please review the
For service information
in new Zealand:
Peter McInnes NZ Ltd
PO Box 303
Troubleshooting section on page ꢀ2.
For service information
in australia:
Peter McInnes Pty Ltd
PO Box 323
Drury
Aukland
New Zealand
HRMC
NSW 23ꢀ0
Ph: 0800 88ꢀ 200
Fax: 0800 88ꢀ 300
Australia
Ph: ꢀ800 990 990
Fax: 0249 02650ꢀ
Email: [email protected]
Email: [email protected]
ꢀ6
how to order accessories
and replacement Parts
To order accessories or replacement
parts for your Food Processor in
australia:
To order accessories or
replacement parts for your
Food Processor in new Zealand:
Peter McInnes NZ Ltd
PO Box 303
Peter McInnes Pty Ltd
PO Box 323
HRMC
Drury
NSW 23ꢀ0
Aukland
New Zealand
Australia
Ph: ꢀ800 990 990
Fax: 0249 02650ꢀ
Ph: 0800 88ꢀ 200
Fax: 0800 88ꢀ 300
Email: [email protected]
Email: [email protected]
accessories for model 5KFPCB700a:
Blades and Discs
Bowls and Covers
Disc Stem*
82ꢀꢀ858
Work Bowl Cover with
Standard Tall Feed Tube
KFP7WC
Multipurpose Blade
KFP72BL
KFP72DB
KFP7SL2
KFP7SH2
KFP7SL4
KFP7SH4
KFP7SL6
KFP7SH6
KFP7JU
Work Bowl Cover with
Ultra Wide Mouth™
Feed Tube
Dough Blade
KFP7WWCWH
KFP72WB
2 mm (Thin) Slicing Disc*
2 mm (Thin) Shredding Disc*
4 mm (Med) Slicing Disc*
4 mm (Med) Shredding Disc*
6 mm (Thick) Slicing Disc*
6 mm (Thick) Shredding Disc*
Julienne Disc*
Work Bowl
Mini Bowl with Storage Lid**
Mini Blade (for Mini Bowl)**
Chef’s Bowl
KFP7MB
KFP7MBL
KFP72CB
other accessories
Egg Whip
KFP72EW
KFP7CP
French Fry Cutting Disc*
Parmesan/Ice Grating Disc*
KFP7FF
Citrus Press
KFP7PI
2-Piece Food Pusher for
Standard Tall Feed Tube
KFP7DP
5 Disc Set
KFP7DS
• 6 mm slicing*
• 6 mm shredding*
• French fry*
2-Piece Food Pusher
for Ultra Wide Mouth™
Feed Tube
KFP7WP
KFP7SP
KFP7SC
• Julienne*
Spatula/Cleaning Tool
Chef’s Accessory Case
• Parmesan/Ice grating*
*
Must order Disc Stem (82ꢀꢀ858) to operate all Accessory Discs.
** Must order Mini Blade (KFP7MBL) to use with Mini Bowl (KFP7MB).
ꢀ7
® Registered trademark of KitchenAid, U.S.A.
™ Trademark of KitchenAid, U.S.A.,
© 2008. All rights reserved.
6366AdZw608
|