®
Stealthbox
I N S T A L L A T I O N G U I D E
This enclosure is not designed to be a pas-
senger seat.We do not recommend it to be
used as such.
START
HERE
for the
SB-D-TRKCTR/12W3v2
If you are dealing with a 1997-2002 there
will be a small black box bolted to the
underside of the center seat.This is the
seatbelt sensor and must be handle with
care. See STEP 9.
(1994-2002 Dodge Ram)
➔
➔
➔
STEP 1: Slide the sat bolts out of the elastic
loops on the center cushion.
STEP 3: Detach the cover fromt he center cush-
ion by unlatching the plastic strips from the metal
bars on its underside. Do not remove it completely
at this point.
STEP 2: Unbolt the cetner seat from underneath
the cushion using a 13mm socket.
STEP 4: Remove the are rest from the cetner
cushion by unbolting the pair of 8mm bolts from
each side.
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1)The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
*Exercise care in separating the twp pieces
so as not to rip the fabric.*
➔
➔
➔
STEP 5: Remove the seat cover from the bottom
cushion.
STEP 6: Place the factory seat cover over the
enclosure.
STEP 7: Slide the arm rest brackets through the
cutouts in the seat cover and bolt into the inserts
provided in the enclosure, using the bolts that were
removed in STEP 4.
STEP 8: Working on the underside of the enclo-
sure, fold the plastic strips under the fabric. Using
the supplied screws, screw through the fabric and
the plastic strips into the enclosure. Screw all four
flaps in.
Do not screw into any areas of the enclo-
sure other than the pre-drilled holes!
Please enjoy your JL Audio Stealthbox
responsibly.
Continued on Next Page ➔
SB-D-TRKCTR/12W3v2, JL AUDIO, Inc 2004
Page 1
Sheet SKU#011104 Revision6/28/2004
|