|
Quick Setup Guide NS-MD4U6N
4-Port Charging Station
PACKAGE CONTENTS
• 4-Port Charging Station
• AC adapter
USING YOUR CHARGING STATION
1 Plug the AC adapter into the charging station’s power jack and a wall outlet.
2 Connect your devices’USB charging cables into your charging station‘s USB
ports. Make sure that your devices’input specifications match the USB ports
that you connect them to.
• Quick Setup Guide
FEATURES
Note: See“Features”for information on the USB ports‘ power output.
3 Wrap your cables loosely around the cable organizers (if needed), then thread
them through the openings in the front of your charging station.
• Designed for tablet, phone, MP3, and eReader charging
• Convenient removable cover with integrated stands
• Locations for cable management
AC adapter
Divider
AC wall
outlet
Openings
Cover
4 Place the cover on the base so that the wire holes on the base and cover are
aligned. Your cables should exit the base through the holes. Insert the dividers
into the slots, as needed.
DC
jack
Base
USB outlet
5V / 2.4A (specified)
USB outlet
5V / 2.0A (total power)
5 Connect your devices to their appropriate power cords, then set them in the
appropriate slots. You can charge four devices at a time.
Note: Check your devices’input specification to determine which USB port to connect it
Before using your new product, please read these instructions to prevent any damage.
to. See“Features”for information on the USB ports‘ power output.
|