iLive MP3 Docking Station IBCD2817DP User Manual

IBCD2817DP  
INSTRUCTION MANUAL  
 
Important Safety Instructions  
1. Read these instructions. All the safety  
and operating instruction should be read  
before the product is operated.  
product. Use only with a cart, stand, tripod,  
bracket, or table recommended by the  
manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use  
a mounting accessory recommended by the  
manufacturer.  
system is grounded so as to provide some  
protection against voltage surges and built-  
up static charges. Article 810 of the National  
Electrical Code, ANSI/NFPA 70, provides  
information with regard to proper ground-  
ing of the mast and supporting structure,  
grounding of the lead-in wire to an antenna  
connection to grounding electrodes, and  
requirements for the grounding electrode.  
2. Keep these instructions. The safety and  
operating instruction should be retained for  
future reference.  
12. A product and cart combination should  
be moved with care. Use only with the cart,  
stand, tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when mov-  
ing the cart/apparatus combination to avoid  
injury from tip-over.  
3. Heed all warnings. All warning on the  
product and in the operating instructions  
should be adhered to.  
4. Follow all instructions. All operating  
and use instructions should be followed.  
5. Water and Moisture: Do not use this  
product near water - for example, near  
a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement, or near a  
swimming pool, and the like. The apparatus  
shall not be exposed to dripping or splashing  
and that no objects filled with liquids, such  
as vases, shall be placed on apparatus.  
20. Wall or Ceiling Mounting: The prod-  
uct should be mounted to a wall or ceiling  
only as recommended by the manufacturer.  
13. Lightning: Unplug this apparatus and  
disconnect the antenna or cable system  
during lightning storms or when unused  
for long periods of time. This will prevent  
damage to the product due to lightning and  
power-line surges.  
6. Cleaning: Clean only with a dry cloth.  
Unplug this product from the wall outlet  
before cleaning. Do not use liquid cleaners  
or aerosol cleaners.  
21. Where the AC plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
7. Do not block any ventilation openings.  
Install in accordance with the manufactur-  
er’s instructions. Slots and openings in the  
cabinet are provided for ventilation and to  
ensure reliable operation of the product and  
to protect it from overheating, and these  
openings must not be blocked or covered.  
The openings should never be blocked by  
placing the product on a bed, sofa, rug, or  
other similar surface.  
14. Servicing: Do not attempt to service  
this product yourself as opening or remov-  
ing covers may expose you to dangerous  
voltage or other hazards . Refer all servicing  
to qualified service personnel.  
22. Ventilation: Slots and openings in the  
cabinet are provided for ventilation and to  
ensure reliable operation of the product and  
to protect it from overheating, and these  
openings must not be blocked or covered.  
The openings should never be blocked by  
placing the product on a bed, sofa, rug, or  
other similar surface. This product should  
not be placed in a built-in installation  
such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
15. Power Sources: Only connect to  
the type of house-hold power supply as  
indicated in the operating instructions and  
rating label. If you are not sure of the type  
of power supply to your home, consult your  
product dealer or local power company. For  
products intended to operate from battery  
power, or other sources, refer to the operat-  
ing instruction.  
8. Heat: Do not install near any heat  
sources such as radiators, heat registers,  
stoves, or other apparatus (including ampli-  
fiers) that produce heat.  
23. Protective Attachment Plug: The  
product is equipped with an attachment plug  
having overload protection. This is a safety  
feature. See Instruction Manual for replace-  
ment or resetting of protective device. If  
replacement of the plug is required, be sure  
the service technician has used a replace-  
ment plug specified by the manufacturer  
that has the same overload protection as the  
original plug.  
9. Grounding or Polarization: Do not  
defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has  
two blades with one wider than the other.  
A grounding type plug has two blades and  
a third grounding prong. The wide blade or  
the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
16. Overloading: Do not overload wall  
outlets or extension cords as this can result  
in a risk of fire or electric shock.  
17. Object and Liquid Entry: Never push  
objects of any kind or spill liquid into this  
product through openings as this could result  
in a risk of fire or electric shock.  
24. Power Lines: An outside antenna sys-  
tem should not be located in the vicinity of  
overhead power lines or other electric light  
or power circuits, or where it can fall into  
such power lines or circuits. When installing  
an outside antenna system, extreme care  
should be taken to keep from touching such  
power lines or circuits as contact with them  
might be fatal.  
18. Replacement Parts and Safety Check:  
When replacement parts are required, be  
sure the service technician has used replace-  
ment parts specified by the manufacturer.  
Ask the service technician to perform  
safety checks to ensure proper operation to  
avoid possible fire, electric shock, or other  
hazards.  
10. Power-Cord Protection: Protect  
the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11. Accessories: Only use attachments/ac-  
cessories specified by the manufacturer.  
Do not place this product on an unstable  
cart, stand tripod, bracket, or table. The  
product may fall, causing serious injury to  
a child or adult, and serious damage to the  
19. Outdoor Antenna Grounding: If an  
outside antenna or cable system is connected  
to the product, be sure the antenna or cable  
 
Video Out Connection Guide  
From Unit  
To Television  
YELLOW  
Connect to the video output  
connection.  
Connect to the video input  
connection.  
• Be sure to select the appropriate Video Input on the Television set.  
Viewing Video or Photos from your iPod on an External Device  
a. Using a video cable, connect an external device such as a TV to the Video Out port on the player.  
b. Insert your iPod with video or photo capabilities into the iPod Docking Station with the appropriate  
insert.  
c. After your iPod Video is seated properly in the docking station, you will now be able to control your iPod  
from the player’s control panel. Using the PLAY/PAUSE, NEXT/SEARCH/MIN., and PREV/SEARCH/  
HR. buttons you can move from one video or photograph to the next, play, and pause.  
 
Audio In Connection Guide  
To an External  
Audio Player  
From Unit  
Connect to the Aux In or  
Line In jack.  
Connect to the headphone  
jack.  
• The unit must be set to AUX in order for the external audio device to play through the units speakers.  
Connecting Other Digital Audio Devices  
a. Use a line-in cord to connect an iPod shuffle or other audio device to the line-in port.  
b. Toggle the AM-FM-CD-iPOD/AUX switch to iPOD/AUX to activate the line-in.  
c. The iPod shuffle or other audio device will now play through the speakers of the player.  
 
5
Features Defined  
1
2
11  
12  
13  
3
4
5
14  
15  
6
16  
17  
18  
19  
20  
21  
22  
7
8
9
10  
23  
 
Features Defined  
1
2
3
4
5
DBBS Press the DBBS button to activate the Dynamic Bass Boost System.  
DBBS Indicator Indicates when the DBBS is activated.  
VOLUME Press the up arrow to increase the volume, and the down arrow to decrease volume.  
POWER Press the POWER button to turn the player on.  
LCD Display View the Time, AM Indicator, PM Indicator, iPod Indicator, Radio Frequency, and CD  
Indicator (“--”) through this Liquid Crystal Display.  
6
7
8
9
iPod Docking Station Connect your iPod, iPod mini, or iPod nano.  
Line-In Use the line-in jack to connect an iPod shuffle, or other audio device to the player.  
Line-Out Use the Line-Out jack to connect the player to external speakers.  
Video Out (Composite) Use the Video Output connection to send a composite video signal from the  
unit to a TV. (Requires a RCA Cable, not included)  
10 Battery Compartment (Requires 8 C-Size Batteries, not included)  
11 CLK SET Press the CLK SET button to activate the clock adjust. Use this button in conjunction with  
the PREV/SEARCH/HR. and NEXT/SEARCH/MIN. buttons to set the clock.  
12 PREV/SEARCH/HR. Press the PREV/SEARCH/HR. button to adjust the hour when setting the clock,  
skip to the previous track on a CD or iPod. Press and hold the PREV/SEARCH/MIN. button to search  
backwards through a track on a CD or iPod.  
13 NEXT/SEARCH/MIN. Press the NEXT/SEARCH/MIN. button to adjust the minute when setting  
the clock, skip to the next track on a CD or iPod. Press and hold the NEXT/SEARCH/MIN. button to  
search forwards through a track on a CD or iPod.  
14 PROG Press the PROG button, select a track, then press the PROG button again to program CD tracks  
in a specified order.  
15 PLAY/PAUSE Press the PLAY/PAUSE button to play or pause an iPod.  
16 TUNING Turn the TUNING dial to adjust the frequency of the AM and FM radio.  
17 STOP Press the STOP button to stop a CD track during play.  
18 REPEAT Press the REPEAT button to activate REP ( repeat one song), or REP ALL (repeat all songs).  
19 AM/FM ST/CD/IPOD-AUX Toggle the AM/FM/CD/iPOD-AUX switch to cycle between AM, FM,  
CD, and iPOD-AUX modes.  
20 CD OPEN Toggle the CD OPEN switch to open the CD Door.  
21 FM Antenna The FM extendable antenna provides flexibility and range when adjusting the FM recep-  
tion. An AM Antenna is built into the player.  
22 CD Door Open using the CD OPEN switch.  
23 AC Cord (1ꢀ0V / ꢃ0 Hz) The detachable AC (Alternating Current) Cord provides power to the player.  
 
7
Peripherals  
24  
25  
28  
26  
27  
29  
iPod Inserts  
Bracket #  
iPod Model/Capacity  
1
iPod nano (first generation)  
5
iPod nano (second generation)  
iPod mini ꢂGB & ꢃGB  
iPod with video 30GB (fifth generation)  
iPod (fourth generation), iPod photo ꢀ0GB & ꢁ0GB, and  
iPod : Uꢀ Special Edition ꢀ0GB  
iPod with video 60GB & 80GB (fifth generation), and iPod  
ꢂ0GB (fourth generation)  
Without Bracket  
iPod photo, and iPod with color display ꢂ0GB & ꢃ0GB.  
8
 
Peripherals Defined  
24 MENU/PROG Press the MENU/PROG button to enter the menu on an iPod.  
25 SHUFFLE Press the SHUFFLE button to randomly play songs on an iPod.  
26 CHAPTER Press up on the CHAPTER button to increase the chapter number, or press down on the  
CHAPTER button to decrease the chapter number.  
27 ALBUM Press up on the ALBUM button to increase the album number, or press down on the ALBUM  
button to decrease the album number.  
28 Navigation Controls/SELECT Use the Navigation Controls to move through an iPod menu system.  
Press the SELECT button to select a song, photo, or video on your iPod.  
29 PLAYLIST Press up on the PLAYLIST button to cycle up through the playlists on an iPod, or press  
down on the PLAYLIST button to cycle down through the playlists on an iPod.  
 
Operations  
Setting the Clock  
a. Press and hold the CLK SET button.  
b. While holding the CLK SET button, press the PREV/SEARCH/HR. button to cycle up through the hours.  
Press the NEXT/SEARCH/MIN. button to cycle up through the minutes  
c. Release the CLK SET button to set the specified time.  
Listening to the Radio  
a. Toggle the AM / FM ST / CD / IPOD (AUX) switch to AM or FM ST.  
b. Use the TUNING dial to adjust the AM or FM radio frequency.  
The Radio Frequency will display on the LCD Display.  
Extend the FM Antenna for better FM reception. To improve the AM reception, adjust the position of  
the entire unit, as an AM antenna is built into the unit.  
Listening to a CD  
a. Toggle the AM / FM ST / CD / IPOD (AUX) switch to CD.  
b. Use CD OPEN switch to open the CD Door. Insert a CD here, label-side facing out, then close the CD  
Door.  
c. Press the PLAY button to begin playing the loaded CD.  
Programming a CD  
When in Program Mode, “PROG” will blink continuously on the LCD Display.  
a. Toggle the AM / FM ST / CD / IPOD (AUX) switch to CD.  
b. Use CD Open switch to open the CD Door. Insert a CD here, label-side facing out.  
c. Press the PROGRAM button.  
• A number will begin blinking on the LCD Display. This indicates the order of the tracks to be  
played. For instance, if a 01 is blinking, then the track you select will be the first to be played.  
d. Press the PREV/SEARCH and NEXT/SEARCH buttons to search the CD tracks. Press PROGRAM  
once the desired track is found.  
• Once you press the PREV/SEARCH or NEXT/SEARCH buttons, the blinking number will change to a  
number that is not blinking. This number indicates the CD track.  
• Repeat this step to program up to 20 CD tracks.  
e. Once the desired tracks are programmed, press the PLAY button to begin playing the programmed tracks.  
10  
 
Operations  
Viewing Video or Photos from your iPod on an External Device  
a. Using a video cable, connect an external device such as a TV to the Video Out port on the player.  
b. Insert your iPod with video or photo capabilities into the iPod Docking Station with the appropriate  
insert.  
c. After your iPod Video is seated properly in the docking station, you will now be able to control your iPod  
from the player’s control panel. Using the PLAY/PAUSE, NEXT/SEARCH/MIN., and PREV/SEARCH/  
HR. buttons you can move from one video or photograph to the next, play, and pause.  
Connecting Other Digital Audio Devices  
a. Use a line-in cord to connect an iPod shuffle or other audio device to the line-in port.  
b. Toggle the AM-FM-CD-iPOD/AUX switch to iPOD/AUX to activate the line-in.  
c. The iPod shuffle or other audio device will now play through the speakers of the player.  
 
11  
Service Information  
Address ꢀ11ꢃ Carr Street, St. Louis MO, ꢃꢁ10ꢃ  
Phone  
Fax  
1-ꢁ1ꢂ-ꢃꢀ1-ꢀ881  
1-ꢁ1ꢂ-588-1805  
Email  
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel  
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,  
visit the Support section at  
francés visite la sección de la ayu- ou le Français visitez la section de  
iPod not included. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. TruBass, SRS and the SRS logo are trademarks  
of SRS Labs, Inc. All other trademarks appearing herein are the property of their respective owners. © ꢀ007 DPI, Inc.  
 

Greenheck Fan Ventilation Hood TCB User Manual
Grindmaster Coffeemaker OPOD User Manual
Hamilton Beach Air Cleaner 840133100 User Manual
Hamilton Beach Egg Cooker 25500 User Manual
Hotpoint Clothes Dryer TCEL 87B User Manual
Hotpoint Refrigerator 8326 User Manual
HP Hewlett Packard Laptop 1103 User Manual
IBM Computer Hardware Version 830 User Manual
IBM Computer Monitor 560 User Manual
IBM Credit Card Machine OS User Manual