Iiyama Computer Monitor AQ5311D User Manual

AQ5311D  
AQ5311D BK  
ENGLISH  
USER MANUAL  
DEUTSCH  
FRANCAIS  
NEDERLANDS  
SVENSKA  
ITALIANO  
TABLE OF CONTENTS  
FOR YOUR SAFETY ..............................................................................  
SAFETY PRECAUTIONS .................................................................  
SPECIAL NOTES ON LCD MONITORS .............................................  
CUSTOMERSERVICE ......................................................................  
CLEANING .......................................................................................  
1
1
3
3
3
BEFOREYOU OPERATETHE MONITOR ................................................  
FEATURES .......................................................................................  
CHECKINGTHE CONTENTS OF THE PACKAGE .............................  
CONTROLSAND CONNECTORS ....................................................  
CONNECTING YOUR MONITOR ......................................................  
COMPUTERSETTING .......................................................................  
ADJUSTINGTHE HEIGHTANDTHE VIEWINGANGLE ....................  
PANELROTATION ............................................................................  
4
4
4
5
6
8
9
9
OPERATINGTHEMONITOR ................................................................... 10  
ADJUSTMENTMENUCONTENTS .................................................... 11  
SCREENADJUSTMENTS ................................................................. 14  
POWERMANAGEMENTFEATURE .................................................. 17  
TROUBLE SHOOTING ............................................................................ 18  
APPENDIX .............................................................................................. 19  
SPECIFICATIONS ............................................................................. 19  
COMPLIANTTIMING ......................................................................... 20  
CONNECTORPINASSIGNMENT ...................................................... 21  
Thank you very much for choosing the iiyama LCD monitor.  
We recommend that you take a few minutes to read carefully through this brief but  
comprehensive manual before installing and switching on the monitor. Please keep this  
manual in a safe place for your future reference.  
 
FOR YOUR SAFETY  
SAFETY PRECAUTIONS  
WARNING  
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE  
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and  
contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause  
fire or electric shock.  
NEVER REMOVE THE CABINET  
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or  
electric shock.  
DO NOT PUT ANY OBJECT INTO THE MONITOR  
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your  
monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object  
inside may cause fire, electric shock or damage.  
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE  
The monitor may cause an injury if it falls or is dropped.  
DO NOT USE THE MONITOR NEAR WATER  
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.  
OPERATE UNDER THE SPECIFIED POWER SUPPLY  
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will  
cause malfunction and may cause fire or electric shock.  
PROTECT THE CABLES  
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects  
on the cables. If damaged, the cables may cause fire or electric shock.  
ADVERSE WEATHER CONDITIONS  
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power  
may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause  
electric shock.  
FOR YOUR SAFETY  
1
 
CAUTION  
INSTALLATION LOCATION  
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky  
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines  
directly on the monitor.  
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION  
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place  
any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables  
and possibly cause injury.  
MAINTAIN GOOD VENTILATION  
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To  
allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.  
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be  
blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating  
the monitor on its back, side, upside down or on a carpet or any other soft material may also cause  
damage.  
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR  
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable  
is disconnected. If you do not disconnect them, it may cause fire or electric shock.  
UNPLUG THE MONITOR  
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid  
accidents.  
HOLD THE PLUG WHEN DISCONNECTING  
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as  
this may cause fire or electric shock.  
DO NOT TOUCH THE PLUG WITH WET HANDS  
Pulling or inserting the plug with wet hands may cause electric shock.  
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER  
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your  
computer.  
OTHERS  
ERGONOMIC RECOMMENDATIONS  
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For  
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away  
from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is  
recommended as looking at the screen continuously can cause eye strain.  
2
FOR YOUR SAFETY  
 
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitors and do not indicate a problem.  
NOTE  
When you first turn on the LCD monitor, the picture may not fit in the display area  
because of the type of computer that is used. In this case, adjust the picture position to  
its correct position.  
n
Due to the nature of the backlight, the screen may flicker during initial use. Turn off the  
Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop pattern  
you use.  
n
n
n
Due to the nature of the LCD screen, an afterimage of the previous screen may remain  
after switching the image, when the same image is displayed for hours. In this case, the  
screen is recovered slowly by changing the image or turning off the Power Switch for  
hours.  
n Contact your dealer or iiyama service center for the backlight replacement when the  
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.  
CUSTOMER SERVICE  
n
The fluorescent light used in the LCD monitor may have to be periodically replaced. For  
NOTE  
the warranty coverage on this component, please check with local iiyama service center.  
If you have to return your unit for service and the original packaging has been discarded,  
please contact your dealer or iiyama service center for advice or replacement packaging.  
n
CLEANING  
WARNING  
If you drop any materials or liquids such as water into the monitor when cleaning, unplug  
n
the power cable immediately and contact your dealer or iiyama service center.  
CAUTION  
NOTE  
n For safety reasons, turn off the power switch and unplug the monitor before you clean it.  
To protect the LCD panel, do not scratch or rub the screen with a hard object.  
n
n
Never use any of the following strong solvents. These will damage the cabinet and the  
LCD screen.  
Spray-type cleaner  
Wax  
Thinner  
Benzine  
Acid or Alkaline solvent  
Abrasive cleaner  
Touching the cabinet with any product made from rubber or plastic for a long time may  
cause degeneration or loss of paint on the cabinet.  
n
CABINET  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then  
wipe the cabinet with a soft dry cloth.  
LCD  
Periodic cleaning with a soft dry cloth is recommended.  
SCREEN  
Don't use tissue paper etc. because these will damage the LCD screen.  
FOR YOUR SAFETY  
3
 
BEFORE YOU OPERATE THE MONITOR  
Please remove the stopper pin on the back of the stand before you install the monitor.  
Careful attention is required as the monitor is sprung loaded and may expand quickly  
when removing it.  
FEATURES  
K 52.8cm (20.8") TFT Color LCD Monitor  
K Supports Resolutions up to 2048 × 1536 (QXGA)  
K Super Wide Viewing Angle and High Resolution  
K Digital Character Smoothing  
Stopper pin  
K Automatic Set-up  
K Plug & Play VESA DDC2B Compliant  
®
Windows 95/98/2000/Me/XP Compliant  
K Power Management  
K Ergonomic Design: MPR3 Approved  
K Digital Input (DVI-I) for Clear Display  
K 90° Panel Rotation Design  
K VESA Standard (100mm×100mm) Compliant  
CHECKING THE CONTENTS OF THE PACKAGE  
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If  
anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.  
1
n Power Cable*  
n AC Adapter  
2
3
n D-Sub Signal Cable MB32* , MB36*  
2
3
n DVI-D Signal Cable DV65* , DV64*  
n Cable Cover  
n AC Adapter Holder  
n Band  
n Screw  
n User Manual  
1
* TO USERS IN 120V AREA  
CAUTION  
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a  
power supply higher than this rating, then a power cable with a rating of 10A/250V must  
be used.  
2
* Accessory for AQ5311D  
3
* Accessory for AQ5311D BK (Cabinet color: Black)  
4
BEFORE YOU OPERATE THE MONITOR  
 
CONTROLS AND CONNECTORS  
< Front >  
< Back >  
Power Indicator  
A
Green: Normal operation  
NOTE  
Orange: Power Management  
The monitor enters into power management mode which reduces the power  
consumption to less than 13.5W when receiving no horizontal and/or vertical sync  
signal.  
Power Switch  
Menu Button  
B
C
D
E
F
G
/ Contrast Button  
/ Brightness Button  
Exit Button  
Keyhole for Security Lock  
You can fasten a security lock and cable to prevent the monitor from being removed without  
your permission.  
NOTE  
H Connector for AC Adapter (DC-IN)  
D-Sub mini 15pin Connector (ANALOG RGB)  
DVI-I 29pin Connector (DVI)  
I
J
BEFORE YOU OPERATE THE MONITOR  
5
 
CONNECTING YOUR MONITOR  
Ensure that both the computer and the monitor are switched off.  
A
B
Connect the computer to the monitor with the signal cable. (See page 21 for CONNECTOR PIN  
ASSIGNMENT.)  
Connect the AC Adapter to the Connector for AC Adapter of the monitor.  
C
D
Connect the Power Cable to the AC Adapter first and then to the power supply.  
NOTE n The signal cables used for connecting the computer and monitor vary by the type of computer  
used. An incorrect connection may cause serious damage to both the monitor and the computer.  
The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is  
required please contact your local iiyama dealer or regional iiyama office.  
n For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama  
office for a suitable adaptor.  
n Make sure you tighten the finger screws at each end of the signal cable.  
n Cables are connected easily by rotating the panel 90 degrees. (See page 9 for PANEL  
ROTATION.)  
n Cables can be bundled together inside the Cable Cover at the back of the stand. See next page  
for cable wiring.  
n AC Adapter can be fastened on the back of the monitor with the AC Adapter Holder. See next  
page for AC Adapter installation.  
[Example of Connection]  
< Back >  
to DVI connector  
Power Cable (Accessory)  
of computer  
DVI-D Signal Cable  
DV64/DV65 (Accessory)  
to D-Sub connector  
of computer  
D-Sub Signal Cable  
Computer  
AC Adapter (Accessory)  
MB32/MB36 (Accessory)  
6
BEFORE YOU OPERATE THE MONITOR  
 
[Cable Wiring]  
Collect cables at the back of the stand.  
A
B
Place the Cable Cover by inserting the tabs into  
guide holes and then sliding the cover  
downward.  
[AC Adapter Installation]  
Screw (Accessory)  
Attach the AC Adapter Holder to the  
AC Adapter.  
A
B
Cavity  
Place the AC Adapter Holder by  
inserting the tabs into the cavities  
on the back of the monitor.  
Tighten the Screw to fasten the AC  
Adapter Holder.  
C
D
AC Adapter Holder  
(Accessory)  
AC Adapter  
(Accessory)  
Bundle up the adapter cable with the  
Band.  
Push to loosen  
the Band.  
Band (Accessory)  
BEFORE YOU OPERATE THE MONITOR  
7
 
COMPUTER SETTING  
n Signal Timing  
When you connect the monitor to the computer for the first time, set the signal timing of the computer to  
VGA before connection. Change to the desired signal timings listed on page 20 in COMPLIANT TIMING,  
after you confirm that the picture appears normally at VGA.  
n Windows 95/98/2000/Me/XP Plug & Play  
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on  
Windows 95/98/2000/Me/XP by connecting the monitor to DDC2B compliant computer with the Signal  
Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be  
necessary for your computer and obtained via the Internet, using the address:  
NOTE n For additional information on how to download the driver for your monitor, please  
access one of the internet sites noted above.  
n Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.  
For further information, please contact your computer dealer first for advice.  
8
BEFORE YOU OPERATE THE MONITOR  
 
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE  
n For optimal viewing it is recommended to look at  
the full face of the monitor, then adjust the monitor’s  
height and angle to your own preference.  
n Hold the panel so that the monitor does not topple  
when you change the monitor’s height or angle.  
n You are able to adjust the monitor’s height up to  
110mm  
110 mm, angle up to 35 degrees right and left, 35  
degrees upward.  
35˚  
NOTE n Do not touch the LCD screen when you  
change the height or the angle. It may  
cause damage or break the LCD screen.  
n Careful attention is required not to catch  
your fingers or hands when you change  
the height or the angle.  
35˚  
35˚  
PANEL ROTATION  
Adjust the monitor’s height to the maximum.  
Rotate the panel 90 degrees.  
A
B
Portrait: Turn clockwise.  
Landscape: Turn counter clockwise.  
NOTE Attempting to rotate without fully  
extending upward may cause damage  
to stand.  
90˚  
Adjust the monitor’s angle to your preference.  
C
BEFORE YOU OPERATE THE MONITOR  
9
 
OPERATING THE MONITOR  
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT  
TIMING shown on page 20. You are also able to adjust the picture by following the button operation shown  
below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.  
Press the Menu Button to start the On Screen Display feature. Move the cursor  
(
by using the  
/
Buttons.  
Select the adjustment icon relating to the adjustment you want to make by  
B
using the  
Use the  
/
Buttons. Press the Menu Button again.  
/
Buttons to make the appropriate adjustment or setting.  
C
D
Press the Exit Button to return to the previous display. Any changes are  
automatically saved in the memory.  
Adjustment icon  
Adjustment menu item  
presently selected  
NOTE  
n The On Screen Display disappears in optional setting seconds after you stop pressing the buttons  
while performing an adjustment. (See pages 12 and 13 for OSD TIME.)  
n
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning  
off the power should be avoided while using the Menu.  
n
Adjustments for FINE, COARSE and POSITION are saved for each signal timing. Except for these  
adjustments, all other adjustments have only one setting which applies to all signal timings.  
10 OPERATING THE MONITOR  
 
ADJUSTMENT MENU CONTENTS  
Direct  
You can skip the Menu display and perform an adjustment immediately by using the following  
button operations.  
l Brightness:  
l Contrast:  
Press the Brightness Button when the Menu is not displayed.  
Press the Contrast Button when the Menu is not displayed.  
l Automatic set-up:  
Press the  
and Buttons at the same time when the Menu is not displayed.  
Analog / DVI-Analog Input  
Adjustment Item  
Problem / Option  
Button to Press  
Too dark  
1
Direct  
BRIGHTNESS *  
CONTRAST  
Too bright  
Too dull  
Direct  
Too intense  
2
AUTO *  
Adjust FINE, COARSE, H-POSITION and V-  
POSITION automatically.  
IMAGE SET-UP  
Direct  
MANUAL  
FINE  
To correct flickering text or lines  
COARSE  
PRESET1  
PRESET2  
PRESET3  
9300K  
6500K  
5500K  
COLOR  
USER  
MODE  
RED  
Too weak  
GREEN  
BLUE  
Too strong  
H-POS  
V-POS  
Too far to the left  
Too far to the right  
OSD POSITION  
Too low  
Too high  
Select the Analog RGB input.  
Select the DVI-Analog input.  
Select the DVI-Digital input.  
ANALOG  
INPUT SELECTION  
DVI-ANALOG  
DVI-DIGITAL  
1
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.  
See page 14 for SCREENADJUSTMENTS.  
2
*
OPERATING THE MONITOR 11  
 
Adjustment Item  
H-POSITION  
Problem / Option  
Too far to the left  
Button to Press  
Too far to the right  
Too low  
Too high  
V-POSITION  
IMAGE SIZE *  
LANGUAGE  
NORMAL  
The picture is displayed at the optimum resolution.  
Stretch the picture to fit the full screen.  
3
EXPANDED  
ENGLISH  
English  
French  
FRANCAIS  
DEUTSCH  
ITALIANO  
ESPANOL  
JAPANESE  
German  
Italian  
Spanish  
Japanese  
You can set the OSD display duration time  
between 5 and 60 seconds.  
OSD TIME  
The model name, year of manufacture, the  
current horizontal scan frequency and vertical  
refresh rate are displayed.  
INFORMATION  
3
*
Main Menu does not appear on the screen if you press the Menu Button while you select NORMAL at  
resolution of less than XGA (1024×768). Select EXPANDED temporarily to display the Main Menu.  
12 OPERATING THE MONITOR  
 
DVI-Digital Input  
Adjustment Item  
Problem / Option  
Button to Press  
Too dark  
1
Direct  
BRIGHTNESS *  
CONTRAST  
COLOR  
Too bright  
Too dull  
Direct  
Too intense  
PRESET1  
PRESET2  
PRESET3  
9300K  
6500K  
5500K  
USER  
MODE  
RED  
Too weak  
Too strong  
GREEN  
BLUE  
H-POS  
V-POS  
Too far to the left  
OSD POSITION  
Too far to the right  
Too low  
Too high  
ANALOG  
Select the Analog RGB input.  
Select the DVI-Analog input.  
Select the DVI-Digital input.  
INPUT SELECTION  
DVI-ANALOG  
DVI-DIGITAL  
NORMAL  
The picture is displayed at the optimum resolution.  
Stretch the picture to fit the full screen.  
2
IMAGE SIZE *  
EXPANDED  
ENGLISH  
English  
French  
German  
Italian  
LANGUAGE  
FRANCAIS  
DEUTSCH  
ITALIANO  
ESPANOL  
JAPANESE  
Spanish  
Japanese  
You can set the OSD display duration time  
between 5 and 60 seconds.  
OSD TIME  
The model name, year of manufacture, the current  
horizontal scan frequency and vertical refresh  
rate are displayed.  
INFORMATION  
1
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.  
Main Menu does not appear on the screen if you press the Menu Button while you select NORMAL at  
resolution of less than XGA (1024×768). Select EXPANDED temporarily to display the Main Menu.  
2
*
OPERATING THE MONITOR 13  
 
SCREEN ADJUSTMENTS  
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.  
n The screen adjustments described in this manual are designed to set image position and minimize flicker  
or blur for the particular computer in use. They are unlike the adjustments you would make on a CRT  
monitor.  
n The monitor is designed to provide the best performance at resolution of 2048 × 1536, but can not provide  
the best at resolutions of less than 2048 × 1536 because the picture is automatically stretched to fit the  
full screen or displayed at optimum resolution. It is recommended to operate at resolution of 2048 × 1536  
in normal use.  
n Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the  
screen enlargement process.  
n It is preferable to adjust the image position and frequency with the monitor controls, rather than the  
computer software or utilities.  
n Perform adjustments after a warm-up period of at least thirty minutes.  
n Additional adjustments may be required after the Automatic set-up depending on the resolution or signal  
timing.  
n The Automatic set-up may not work correctly when displaying the picture other than the Test.bmp  
(screen adjustment pattern). In this case, manual adjustments are required.  
There are two ways to adjust the screen. One way is automatic adjustment for FINE, COARSE and  
POSITION. Another way is performing each adjustment manually.  
Perform the Automatic set-up first when the monitor is connected to a new computer, or resolution is  
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing  
the Automatic set-up, manual adjustments are required. Both adjustments should be made by using the  
/www.iiyama.co.uk).  
This manual explains adjustment under Windows 95/98/2000/Me/XP.  
Set the IMAGE SIZE feature to NORMAL and display the picture at the optimum resolution.  
Enter the Test.bmp (screen adjustment pattern) to wallpaper.  
A
B
NOTE n Consult the appropriate documentation for doing this.  
n Test.bmp is made at resolution of 2048 × 1536. Set the display position to center in the  
®
wallpaper setting dialogue box. If you use Microsoft PLUS! 95/98 cancel the setting of  
“Stretch desktop wallpaper to fit the screen”.  
[Adjustment pattern]  
Color bar  
Zebra pattern  
Picture frame  
This is the image  
displayed at 2048 × 1536.  
14 OPERATING THE MONITOR  
 
Select AUTO in IMAGE SET-UP and perform the Automatic set-up.  
C
Or press the  
and  
Buttons at the same time when the Menu is not displayed.  
(Direct adjustment)  
Adjust the image manually by following procedure below when the screen has a flicker or  
blur, or the picture does not fit in the display area after performing the Automatic set-up.  
D
E
Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the  
display area.  
1) Adjust the H-POSITION so that the left side of the picture frame will move to the left  
edge of the display area.  
F
2) Stretch the right side of the picture frame to the right edge of the display area by  
adjusting the COARSE in IMAGE SET-UP.  
NOTE n When the left side of the picture frame moves apart from the left edge of the display area  
during the COARSE adjustment, adjust steps 1) and 2).  
n Another way to make the COARSE adjustment is to correct the vertical wavy lines in the  
zebra pattern.  
n The picture may flicker during the COARSE, H-POSITION and V-POSITION adjustment.  
n In case the picture frame is bigger or smaller than the data display area after the COARSE  
adjustment, repeat steps from  
.
C
OPERATING THE MONITOR 15  
 
Adjust the FINE in IMAGE SET-UP to correct horizontal wavy noise, flicker or blur in the  
zebra pattern.  
G
NOTE n In case the strong flicker or blurs remain on a part of the screen, repeat steps  
and  
F
G
because the COARSE may not be adjusted correctly. If the flicker or blurs still remain, set  
the refresh rate of computer to low (60Hz) and repeat steps from again.  
C
n Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the  
adjustment.  
Adjust the BRIGHTNESS and COLOR to get the desired picture after you complete the FINE  
and COARSE adjustments.  
H
Put back your favorite wallpaper.  
16 OPERATING THE MONITOR  
 
POWER MANAGEMENT FEATURE  
The power management feature of this product automatically reduces unnecessary power consumption  
of the monitor when your computer is not in use.  
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a  
power management step the monitor takes as described below. The power management function, including  
any timer settings is configured by the operating system. Check your operating system manual for  
information on how this can be configured.  
Power Management Mode  
n
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor  
enters into Power Management Mode which reduces the power consumption to less than 13.5W. The  
screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the  
image reappears in several seconds when either the keyboard or the mouse are touched again.  
Power Indicator  
NORMAL MODE  
Green  
POWER MANAGEMENT MODE  
Orange  
POWER  
0
13.5 W  
100%  
CONSUMPTION  
Even when using the power management mode, the monitor consumes electricity. Turn off  
the Power Switch whenever the monitor is not in use, during the night and weekends, to  
avoid unnecessary power consumption.  
NOTE  
n
n
It is possible that the video signal from the computer may be on while the H or V sync signal  
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.  
OPERATING THE MONITOR 17  
 
TROUBLE SHOOTING  
If the monitor fails to operate correctly, please follow the steps below for a possible solution.  
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have.  
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE  
MONITOR or if the problem persists.  
3.  
If you are experiencing a problem which is not described below or you cannot correct the problem,  
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.  
Problem  
Check  
The picture does  
not appear.  
A
(Power indicator o The AC Adapter cable is firmly connected.  
does not light up.) o The Power Cable is firmly seated in the socket.  
o The Power Switch is turned ON.  
o The AC socket is live. Please check with another piece of equipment.  
(Power indicator o If the blank screen saver is in active mode, touch the keyboard or the mouse.  
is green.)  
o Increase the Contrast and/or Brightness.  
The computer is ON.  
o
o The Signal Cable is properly connected.  
o The signal timing of the computer is within the specification of the monitor.  
(Power indicator o If the monitor is in power management mode, touch the keyboard or the mouse.  
o
If the input signal selection is different, switch the INPUT SELECTION.  
The computer is ON.  
is orange.)  
o
o The Signal Cable is properly connected.  
o
The signal timing of the computer is within the specification of the monitor.  
The screen is not o The Signal Cable is properly connected.  
B
C
D
E
synchronized.  
o The signal timing of the computer is within the specification of the monitor.  
o The video output level of the computer is within the specification of the monitor.  
The screen  
o The signal timing of the computer is within the specification of the monitor.  
position is not in  
the center.  
The screen is  
too bright or too  
dark.  
o The video output level of the computer is within the specification of the monitor.  
o The power voltage is within the specification of the monitor.  
o The signal timing of the computer is within the specification of the monitor.  
The screen is  
shaking.  
18 TROUBLE SHOOTING  
 
APPENDIX  
SPECIFICATIONS  
LCD  
Driving system  
Size  
TFT  
Panel  
Diagonal: 52.8cm / 20.8"  
0.207mm H × 0.207mm V  
Pixel pitch  
2
Brightness  
235cd/m (Typical)  
Contrast ratio  
Viewable angle  
Response time  
300 : 1 (Typical)  
Right / Left / Up / Down: 85 degrees each (Typical)  
50ms typical, 68ms maximum (Black, white, black)  
16,777,216 maximum  
Display Colors  
Sync Frequency  
Dot Clock  
Horizontal: 31.5-96.0kHz, Vertical: 60-75Hz  
239MHz maximum  
Maximum Resolution  
Input Connector  
2048 × 1536  
D-Sub mini 15pin  
DVI-I 29pin  
TM  
Plug & Play  
VESA DDC2B  
Input Sync Signal  
Separate sync: TTL, Positive or Negative  
Composite sync: TTL, Positive or Negative  
Input Video Signal  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital: DVI (Digital Visual Interface standard Rev.1.0) compliance  
Maximum Screen Size  
Power Source  
423.9mm W × 318.0mm H / 16.7" W × 12.5" H  
ACAdapter (Accessory): 100-230VAC, 50/60Hz, 2.5A (Output: 12VDC, 8.33A)  
Monitor: 12VDC, 6.9A  
Power Consumption  
100W maximum  
Power management mode: 13.5W maximum  
Dimensions / Net Weight 472 × 419-529 × 241mm / 18.6 × 16.5-20.8 × 9.5" (W×H×D), 9.5kg / 20.9lbs  
Tilt Angle  
Right / Left: 35 degrees each, Up: 35 degrees  
Environmental  
Considerations  
Operative temperature:  
Storage temperature:  
10 to 35°C / 50 to 95°F  
-20 to 60°C / -4 to 140°F  
Humidity (-20 to under 50°C / -4 to under 122°F) :  
20 to 80% (No condensation)  
Humidity (50 to 60°C / 122 to 140°F) : 20 to 55% (No condensation)  
CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2,  
Approvals  
FCC-B, UL / C-UL, VCCI-B  
APPENDIX 19  
 
472mm/18.6"  
425.4mm/16.7"  
87mm/3.4"  
344mm/13.5"  
(
): Maximum adjustment range  
COMPLIANT TIMING  
Horizontal  
Frequency  
Vertical  
Frequency  
Video Mode  
Dot Clock  
1,2  
2
DOS  
640 × 350*  
31.47kHz  
31.47kHz  
31.47kHz  
37.86kHz  
37.50kHz  
37.88kHz  
48.08kHz  
46.86kHz  
48.36kHz  
56.48kHz  
60.02kHz  
67.50kHz  
64.00kHz  
80.00kHz  
75.00kHz  
87.50kHz  
93.75kHz  
35.00kHz  
49.72kHz  
60.24kHz  
68.68kHz  
61.84kHz  
75.83kHz  
81.18kHz  
96.00kHz  
70.00Hz  
60.00Hz  
70.08Hz  
72.80Hz  
75.00Hz  
60.32Hz  
72.19Hz  
75.00Hz  
60.00Hz  
70.10Hz  
75.00Hz  
75.00Hz  
60.00Hz  
75.00Hz  
60.00Hz  
70.00Hz  
75.00Hz  
67.00Hz  
74.55Hz  
74.93Hz  
75.06Hz  
66.00Hz  
71.53Hz  
76.16Hz  
60.00Hz  
25.17MHz  
25.18MHz  
28.32MHz  
31.50MHz  
31.50MHz  
40.00MHz  
50.00MHz  
49.50MHz  
65.00MHz  
75.00MHz  
78.75MHz  
108.00MHz  
108.00MHz  
135.00MHz  
162.00MHz  
189.00MHz  
202.50MHz  
30.24MHz  
57.29MHz  
80.00MHz  
100.00MHz  
94.50MHz  
128.00MHz  
135.09MHz  
238.85MHz  
640 × 480  
720 × 400*  
640 × 480  
VESA  
VGA  
SVGA 800 × 600  
XGA 1024 × 768  
SXGA  
1152 × 864  
1280 × 1024  
UXGA 1600 × 1200  
Macintosh  
SUN66  
640 × 480  
832 × 624  
1024 × 768  
1152 × 870  
1152 × 900  
SXGA 1280 × 1024  
QXGA 2048 × 1536  
1
NOTE  
* The vertical screen size cannot be adjusted to the full screen.  
2
* The screen is stretched vertically because the screen size ratio is not 4:3.  
20 APPENDIX  
 
CONNECTOR PIN ASSIGNMENT  
n D-Sub mini 15pin Connector  
Pin  
1
Input Signal  
Red video  
Pin  
9
Input Signal  
+5V  
2
10 Ground  
Green video  
Blue video  
11  
12  
13  
14  
15  
3
Ground  
4
Ground  
Data line (SDA)*  
H-Sync / HV-Sync  
V-Sync  
5
Ground  
6
Red video ground  
Green video ground  
Blue video ground  
7
Clock line (SCL)*  
* Compliant to VESA DDC.  
8
n DVI-I 29pin Connector  
Pin  
1
Input Signal  
T.M.D.S Data 2–  
T.M.D.S Data 2+  
Pin  
16  
17  
Input Signal  
Hot Plug Detect  
T.M.D.S Data 0–  
C2  
C4  
C1  
C3  
1
9
8
16  
24  
2
3
18 T.M.D.S Data 0+  
T.M.D.S Data 2/4 Ground  
T.M.D.S Data 4–  
17  
C5  
4
19 T.M.D.S Data 0/5 Ground  
20 T.M.D.S Data 5–  
DVI-I  
T.M.D.S Data 4+  
5
6
Clock line (SCL) *  
21 T.M.D.S Data 5+  
7
Data line (SDA) *  
Analog V-Sync  
22 T.M.D.S Clock Ground  
T.M.D.S Clock +  
T.M.D.S Clock –  
8
23  
24  
9
T.M.D.S Data 1–  
T.M.D.S Data 1+  
10  
11  
12  
13  
14  
15  
C1 Analog Red  
T.M.D.S Data 1/3 Ground  
T.M.D.S Data 3–  
T.M.D.S Data 3+  
+5V Power  
C2 Analog Green  
C3  
Analog Blue  
C4 Analog H-Sync  
C5 Analog Ground  
* Compliant to VESA DDC.  
Ground  
APPENDIX 21  
 

Greenheck Fan Ventilation Hood SMDR 501 User Manual
Grizzly Stereo System H2872 User Manual
Haier Water Heater ES25H H1H User Manual
Hamilton Beach Kitchen Grill 840100500 User Manual
Harbor Freight Tools Impact Driver 92353 User Manual
Healthrider Treadmill HRTL10980 User Manual
Heat Controller Heat Pump HTD User Manual
HP Hewlett Packard Tablet Accessory NX9000 User Manual
Humminbird Fish Finder 150 User Manual
Hunter Fan Outdoor Ceiling Fan 23898 User Manual