Honeywell Automobile Accessories 5X80 User Manual

This Development Kit may be used with either the  
N56XX or 5X80 Series imaging scan engines.  
Connect the Development Engine to a  
PC  
N56XX engine  
5X80 engine  
The image engine can connect to a PC for evaluation.  
Note: The development board and the kit  
components are not intended for integration  
and should ONLY be used for evaluation of the  
image engine.  
N56XX and 5X80  
USB Connection  
ESD Precautions  
Imaging Scan Engine Development Kit  
1. Download and install the appropriate USB driver  
Image engines are susceptible to ESD damage. Use  
care when handling an engine outside its ESD safe  
packaging. Grounding wrist straps and properly  
grounded work areas must be used.  
2. Turn off power to the PC.  
Quick Start Guide  
ISEDevKit-QS Rev A  
6/11  
3. Connect the interface cable included in the kit to  
the engine and to the matching USB port on the  
back of the computer.  
Warning for N56XXX-XXX-XX5 engine only:  
3. Connect the power supply connector to the serial  
interface cable. Plug in the power supply.  
Connecting power to both the micro-B  
!
connector and the 10 pin RJ45 connector  
simultaneously could damage the PC and/or the  
engine.  
4. Turn the PC back on. The engine beeps.  
RS232 Connection  
USB Full  
Speed  
1. Turn off power to the PC.  
2. Connect the serial interface cable to the  
development board and to the matching port on  
the back of the PC.  
USB High  
Speed  
4. Turn the PC back on. The engine beeps.  
 

Graco Heat Pump P20LCM User Manual
Greenheck Fan Ventilation Hood QEM User Manual
Hamilton Beach Range 32507S User Manual
HANNspree Computer Monitor ST321MKB User Manual
Heat Glo LifeStyle Indoor Fireplace fb grand User Manual
HP Hewlett Packard Power Supply R7000 User Manual
Hunter Fan Air Cleaner 300075 User Manual
Hunter Fan Humidifier 41284 02 User Manual
Husqvarna Drill 225AI15 AI25 User Manual
Impex Fitness Equipment MD 844 User Manual