Harbor Freight Tools Thermometer 96451 User Manual

Infrared thermometer  
model 96451  
operatIng InstructIons  
Diagrams within this manual may not be drawn proportionally.  
Due to continuing improvements, actual product may differ slightly from the product described herein.  
®
distributed exclusively by harbor freight tools .  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our website at: http://www.harborfreight.com  
read this material before using this product.  
failure to do so can result in serious injury.  
saVe thIs manual.  
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
for technical questions or replacement parts, please call 1-800-444-3353.  
 
2.  
Maintain labels and nameplates on the product. These carry important safety  
information. If unreadable or missing, contact Harbor Freight Tools for a  
replacement.  
saVe these InstructIons.  
specIfIcatIons  
AVOID EXPOSURE – Laser light is emitted from this aperture.  
-4° F to 968° F  
(-20° C to 520° C)  
Measurement Range  
DANGER  
± 4° F below 212° F  
LASER LIght  
AVOID DIREct EyE EXPOSURE  
Accuracy  
Response Time  
± 2% reading above 212° F  
Max. Output: <5 mW, Wavelength: 630-660 nm  
Class IIIa laser ProduCt  
this product complies with 21 CFr 1040.10 and 1040.11  
CeN-teCH, 3491 Mission oaks Blvd., Camarillo, Ca, usa, 93011  
500 mSec  
WARNINg  
to prevent serious injury:  
Distance to Spot Size 8:1  
Battery Requirements 9V  
1. do not use for medical purposes.  
2. Wear aNsI-approved safety goggles when replacing battery.  
date:_____, _________________DO NOt REMOVE.  
unpacKIng  
When unpacking, check to make sure that the item is intact and undamaged. If any  
parts are missing or broken, please call Harbor Freight Tools at the number shown on the  
cover of this manual as soon as possible.  
operatIng InstructIons  
read the entIre Important safety InformatIon section at the  
beginning of this manual including all text under subheadings therein  
before set up or use of this product.  
note: Do not expose this product to strong electromagnetic fields, such as those  
generated by an arc welder, induction heater, etc. Allow the unit 30 minutes to  
adjust, before use, when introduced to significant temperature changes.  
1.  
Remove the battery cover and insert a 9V battery into the unit, paying attention to  
polarity. Replace battery cover.  
2.  
3.  
Push the “Laser ON/OFF” button to activate unit.  
Pull and hold down trigger to turn unit on. When the Trigger is released, the unit  
will beep and display the last temperature measured for 15 seconds.  
4.  
5.  
To locate a “hot spot” move laser up and down in an area to see temperature  
variance.  
Non-reflective surfaces will yield a more accurate reading than reflective  
surfaces. Duct tape (not included) can be applied to reflective surfaces in order  
reV 07j  
SKU 96451  
for technical questions, please call 1-800-444-3353.  
Page 3  
 
to get a better measurement. Allow sufficient time for the tape to match the  
temperature of the surface it is applied to before trying to get a reading.  
6.  
The maximum range for the Infrared Thermometer is about 8 feet. The object  
being tested should be larger than the size calculated by the field of view  
diagram, below  
field of View  
7.  
8.  
Push the °F/°C button to toggle from Fahrenheit to Celsius.  
Clean the lens with dry compressed air and wipe the rest of the unit down with a  
soft, damp cloth, then store the product indoors out of children’s reach.  
maIntenance and serVIcIng  
damaged products can fail, causing personal injury. do  
not use a damaged product. If abnormal noise or vibration  
cautIon  
occurs, have the problem corrected before further use.  
cleaning, maintenance, and lubrication  
1.  
2.  
Before each use, inspect the general condition of the product. Check for  
loose screws, misalignment or binding of moving parts, cracked or broken parts,  
and any other condition that may affect its safe operation.  
after use, clean external surfaces of the product with clean, moist cloth.  
SKU 96451  
for technical questions, please call 1-800-444-3353.  
Page 4  
 
please read the folloWIng carefully  
THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROVIDeD THe PARTS LIST AND ASSeMBLy  
DIAgRAM IN THIS MANUAL AS A ReFeReNCe TOOL ONLy. NeITHeR THe MANUFACTUReR OR  
DISTRIBUTOR MAKeS ANy RePReSeNTATION OR WARRANTy OF ANy KIND TO THe BUyeR THAT  
He OR SHe IS qUALIFIeD TO MAKe ANy RePAIRS TO THe PRODUCT, OR THAT He OR SHe IS  
qUALIFIeD TO RePLACe ANy PARTS OF THe PRODUCT. IN FACT, THe MANUFACTUReR AND/OR  
DISTRIBUTOR exPReSSLy STATeS THAT ALL RePAIRS AND PARTS RePLACeMeNTS SHOULD Be  
UNDeRTAKeN By CeRTIFIeDAND LICeNSeD TeCHNICIANS, AND NOT By THe BUyeR. THe BUyeR  
ASSUMeS ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HeR RePAIRS TO THe ORIgINAL  
PRODUCT OR RePLACeMeNT PARTS THeReTO, OR ARISINg OUT OF HIS OR HeR INSTALLATION  
OF RePLACeMeNT PARTS THeReTO.  
parts lIst  
part  
1
description  
Handle Case  
Qty  
1
part  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
description  
Receiving Housing  
Qty  
1
2
Left Cover  
1
LCD  
1
3
Right Cover  
1
Laser Set  
1
4
Battery Cover  
Opening Hood  
Trigger  
1
Conductive Rubber  
Screw  
1
5
1
8
6
1
Tape  
1
7
Receiving Tube  
Backlight Board  
Right Button  
1
Battery Connector  
Spring  
2
8
1
1
9
1
Black Rubber  
Sponge Mat  
Battery (not included)  
Panel Label  
PCB  
2
10  
11  
12  
13  
Left Button  
1
1
Aluminum Receiving Tube  
Aluminum Lens Tube  
Sensor Lens  
1
1
1
1
1
1
SKU 96451  
for technical questions, please call 1-800-444-3353.  
Page 5  
 
assemBly dIagram  
record products serial number here:  
note: If product has no serial number, record month and year of purchase instead.  
note: Some parts are listed and shown for illustration purposes only, and are not  
available individually as replacement parts.  
SKU 96451  
for technical questions, please call 1-800-444-3353.  
Page 6  
 
lImIted 1 year Warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this product is  
free from defects in materials and workmanship for the period of one year from the date  
of purchase (90 days if used by a professional contractor or if used as rental equipment).  
This warranty does not apply to damage due directly or indirectly, to misuse, abuse,  
negligence or accidents, repairs or alterations outside our facilities, normal wear and tear,  
or to lack of maintenance. We shall in no event be liable for death, injuries to persons or  
property, or for incidental, contingent, special or consequential damages arising from the  
use of our product. Some states do not allow the exclusion or limitation of incidental or  
consequential damages, so the above limitation of exclusion may not apply to you. THIS  
WARRANTy IS exPReSSLy IN LIeU OF ALL OTHeR WARRANTIeS, exPReSS OR  
IMPLIeD, INCLUDINg THe WARRANTIeS OF MeRCHANTABILITy AND FITNeSS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the complaint  
must accompany the merchandise. If our inspection verifies the defect, we will either  
repair or replace the product at our election or we may elect to refund the purchase price  
if we cannot readily and quickly provide you with a replacement. We will return repaired  
products at our expense, but if we determine there is no defect, or that the defect resulted  
from causes not within the scope of our warranty, then you must bear the cost of returning  
the product.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
SKU 96451  
for technical questions, please call 1-800-444-3353.  
Page 7  
 

Graco Food Processor 16U505 User Manual
Gravely Snow Blower 210E+05 User Manual
H2O Audio Headphones iDV1 5A1 User Manual
Harbor Freight Tools Automobile Parts 98480 User Manual
Honeywell Video Game Controller R0512 User Manual
Hotpoint Oven osx 1036n dcx s User Manual
HP Hewlett Packard Network Card WLAN Assessment Service User Manual
HP Hewlett Packard Server A7818 IE002 User Manual
HP Hewlett Packard Switch zl User Manual
Huffy Fitness Equipment M781921 User Manual