Haier Washer Dryer HWMP50F User Manual

Fully Automatic Washing Machine  
User's manual  
This manual is for  
HWMP50F  
Please read this manual  
carefully before using.  
Retain it for future  
referencDeo.wnload from Www.Somanuals.com. All Manuals Search And Download.  
Names of the parts  
Cold water valve  
Hot water valve  
Water absorption  
cushion  
Top lid component  
Detergent box  
Control pannel  
Lint filter  
Power cord  
Handle  
Balance ring  
Inner tub  
Pulsater  
Front control  
board  
Cabinet  
Fixed leg  
(3 pieces)  
Drain bushing  
Adjustable  
leg film  
Drain  
protective lid  
Adjustable leg  
Back cover  
Meaning and description of the symbols  
Contents marked with that symbol are related to the  
Warning sign  
safety of the product and the personal safety of the  
users. Please operate in strict conformity to the  
contents, otherwise it may cause damage of the  
machine or injure the personal safety of the user.  
Contents marked with that symbol are actions forbidden  
Forbidden sign  
to perform. Performing of those actions may result in  
damage of the machine or injure the personal safety of  
the user.  
1
 
Safety precautions  
The washing machine must be positioned  
Please plug the power plug on special  
receptacle. Be sure to use three-pins  
power receptacle. Ensure that the earthing  
prong of the power receptacle is earthed  
reliably. Use leakage protector if possible.  
so that the plug is accessible. Be sure to pull  
the plug off and close the water faucet in  
following cases: power failure, delivering  
the machine, setting the machine idle or  
cleaning the machine.  
Do not plug or pull the  
power plug with wet  
hand.  
Earth  
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.  
Keep the pin of the power plug clean,if the power plug is polluted with dust,  
please wipe with dry cloth carefully.  
If the supply cord is damaged, it must be replaced by  
the manufacturer or its service agent or a similarly  
qualified person in order to avoid a hazard.  
In case the washing machine is installed  
on ground with carpet, do not block the  
ventilation hole with carpet.  
Do not use water hotter than 60  
.
The ventilation  
Ensure carpet does not  
obstruct the  
holes at the bottom  
Soft object  
opening in  
the bases.  
Back  
Front  
Do not wash water-proof  
Do not put the machine at damp place  
like the bathroom. Never wash it with  
water. Do not put wet laundries on the  
control panel.  
laundries like the raincoat, bike  
covers etc. to avoid abnormal  
vibrations in spinning.  
Do not let the machine share one receptacle with  
other electric appliances. If the plugging into the  
receptacleis loose, do not use the plug any more.  
If washing machine is supplied from a cord  
extension set or electrical portable outlet device,  
no cord extension set or electric portable outlet  
device should be positioned so it is not subject to  
splashing or ingress of moisture.  
2
 
Safety precautions  
Do not put hand into the rotating tub.  
Do not decompose, repair or alter  
the machine byyourself.  
It is dangerous even if the rotation  
speed is slow. Take special care of the  
children. Keep children away from the  
washing machine to avoid them climbing  
on it.  
The appliance is not instruct for use of  
young children of infirm persons without  
supervision.  
Young children  
should be  
supervised to  
ensure that they  
do not play with  
the appliance.  
Do not putany hot orheavy items  
(such as the kettle with hot water) on  
the washing  
Do not wash laundries with volatile  
materials (such as  
thinner,  
machine.  
petrol etc.).  
Benzene  
Keep the machine away from  
direct sunlight andheat source  
like the heater.  
The handicapped or children shall  
not use the machine without care.  
Toprotect your laundries and  
washing machine, please take  
out all of the coins, buttons, sand,  
hairpin and other  
foreign materials  
before washing.  
To prevent the lint in the tub from  
blocking the cascade outlet and  
influencing the cascadeeffect, please  
keep the lint filter in good condition,  
and install it to proper position during  
washing. If the lint filter is lost or  
damaged, please  
contact the local  
after-sales service  
department of our  
company.  
Please check if the water faucet is  
open, and if the connection of the  
water inlet pipe is proper.  
It is suggested to use formless  
washing powder.  
3
 
Installation and adjustment  
Please install and adjust the machine according to the requirement of  
the mannual. It is very important to your security and correct  
operating the machine.  
Install the lint filter  
After opening the package, please take out the lint  
filter from the document bag, install it to the inner  
tub. See to the figure.  
Inner tub  
Lint filter  
Install the bottom plate  
After you open the package, please lean  
the washing machine gently down on Soft  
Back  
object ( like the towel cloth,blanket, etc. ).  
Install the bottom plate to the bottom of the  
machine with the eight screws by a cross  
Front  
screwdriver, then lift the machine up gently.  
See to the figure:  
Bottom plate  
Soft object  
Screw  
Adjust the Installation position  
The largest allowable slope of the shank base of the machine is 2 .The  
slanting or rough ground will result in unstable running or stoppage of the  
machine. Please adjust it with following methods:  
Confirm it's horizontal:  
Hang the lead line to check if it is  
horizontal.  
2
Adjust the adjustable leg:  
1 .To twist the adjustable leg, please first  
lift up the side of the leg slightly, loosen  
the adjustable nut, and twist the leg.  
the adjustable nut  
Fasten  
Low  
Loosen  
High  
2 . After adjustment, fasten the nut.  
the adjustable feet  
Drain hose  
Ensure the drain hose si mounted at a suitable height.  
(Between 800-1200mm above the floor).  
Do not poke it too far down the drain pipe or silphoning will occur.  
4
 
Install the water inlet hose  
Install the water inlet hose  
Use the new hose and the old hose should not be reused.  
1. Insert a new flat washer into each end of the inlet hoses. Firmly put the  
washers in the coupling.  
Note:  
Use the new hose sets supplied with the washer.  
Any other old hose sets should not be used.  
You may have to use pliers to tighten the coupling.  
Do not over tighten because you may cause  
damage to the valve.  
2. Connect the water inlet hoses to the water faucet.  
3. Connect the other ends to their respective cold and hot water inlet valve  
located at the rear of the washer  
Nut of the water inlet hose  
Water absorption cushion  
Jointer of the water inlet valve  
4.Fasten the nut. Swing it gently to confirm if it's suitable.  
Check the connection between the  
water inlet hose and the water tap  
1.Swaying the hose gently to confirm if it is fastened  
stable.  
2.After installation, openthe tap tocheck if itleaks.  
3.Do not bend the hose with overstrain.  
4.Before each usage please check if the connection  
between the water inlet hose and the water tap, and  
the connection between the water inlet hose and  
washer are firm, so as to prevent dropping from  
improve Installation position.  
Take down the water inlet hose  
1.Close the water tap.  
2. Pull off the water inlet hose from the water tap and washer.  
5
 
1.Preparation before washing  
Preparation before washing  
1.Connect the water inlet hose  
2.Confirm that the washing machine is earthed reliably.Then  
insert the power plug into the receptacle.Do not connect  
the earth terminal to the gas pipe and tap water pipe.  
3.Do not put down the drain hose.  
4.Slanting or uneven  
ground may result  
0.8m  
H
1.2m  
in unstable working  
or abnormal noise.  
Please make the  
machine stand horizontally.  
Pay attention to followings before washing the laundries  
When the pulsator  
is running ,the  
buttons of the  
Clear the  
pocket.  
Confirm if  
there's  
The quantity of  
the laundries  
shall not exceed  
the rated value.  
The big laundries  
like the jeans  
shall be put in  
loosely.  
Fasten the  
buttons and  
zippers.  
Take out the  
coins ,  
special  
laundries may  
cause noise. For  
the sake of discretion,  
please put the  
laundries with  
requirement  
for the  
sand, hairpins  
etc.  
laundries.  
buttons into other  
laundries.  
a. Check if the laundries are applicable for washing with machine.  
b. Divide the laundries with unfast color from other laundries.  
c. Put those laundries difficult to absorb water into water with hand.  
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.  
For the parts with heavy soil, please apply detergent in advance, which can make it  
easier to remove the soil.  
e. For those laundries that may get lint ball and those with long fur, turn it over before  
putting in.  
f. Do not put those laundries polluted by chemicals directly into the washing machine.  
For those small laundries and those may get twisting or worn, and woolen/fur  
laundries, please put them into mesh bag for washing.  
6
 
2.Put in the laundries  
The capacity of washing of the machine refer to the  
largest weight of the standard laundries under dry  
condition that can be washed in one time. Laundries  
quantity in one washing cycle shall be lower than the  
rated capacity.  
The thickness ,size , type of the cloth will influence the  
actual washing capacity. It is suitable to put inreasonable  
amount of laundries and the laundries can be turned  
round in washing for one time washing.  
Do not select more than "L" water level for laundries  
less than 1.0kg ,so as to avoid splashing of water.  
3. Usage of the detergent  
How to use washing powder  
It is suggested to add washing powder into the box  
directly under fuzzy program and reserve program.  
Dissolve directly inside the washing machine: (not  
applicable for fuzzy and reserve program)  
1.Add some water(select the " L " water level)  
2.Add washing powder. Run for about 30s to fully  
dissolve the powder. Then push the"start/pause"  
button.  
How to use the whitener  
3.Put in laundries. Select suitable water level. Push  
the "start/pause"button again.  
Fill water to decided level.  
Dilute the whitener with  
container. Pour it slowly  
into the washing tub.  
Avoid using whitener on  
laundries with color or  
pattern as they are prone  
to lose color.  
Quick dissolving of washing powder:  
1.Prepare warm water of 30 C and container.  
2. Add washing powder while stirring to dissolve it  
completely.  
Please add suitable washing powder as per the  
laundries quantity, the set water level and water quantity.  
If you select save program, it is suggested to use  
liquid detergent instead of washing powder to  
guarantee the washing effect.  
The whitener shall not  
touch the laundries  
directly.  
It is not recommended to use rich-foam washing  
powder.  
Refer to the user's  
manual for the usage and  
quantity of the whitener.  
For powder whitener,  
please dissolve it before  
use.  
Washing powder with poor quality or long-time  
storage may get caked. Please clean the detergent  
box duly in usage.  
4. Close the top lid  
If you open the top lid,the machine will stop working  
and alarm in spinning process.  
7
 
5 Use the operation buttons  
a Description of operation button  
Process,remain time digitron  
"POWER ON/OFF" button  
Push the " POWER ON/OFF" button to  
switch on the power.  
Under power-on mode, push it to switch  
off the power.  
Push the " POWER ON/OFF" button to  
switch on the power. If the " POWER  
ON/OFF" button is not pushed, the  
machine will switch off the power  
automatically after 5 minutes.  
It displays "--" during detecting.  
It displays total remained time  
(min). If the total time exceeds 99  
minutes, it uses "A" on tens digit  
to represent100 minutes, and uses  
"b" to represent 110 minutes.  
E.g. "A3" represents 103 minutes.  
It displays abnormal symbol in  
abnormal situation.  
(See to Page12)  
"START/PAUSE" button  
After the power is switched on,  
press it to start the machine.  
During working,push it to pause.  
During pause,push this button to  
restart and go on working  
POWER  
ON/OFF  
TIME  
REMAINING  
START  
PAUSE  
WASH  
CYCLE  
WATER  
LEVEL  
" WATER LEVEL"button  
WASH CYCLE  
" button  
"
The user selects a suitable water  
level depending on the load.  
Press" WASH CYCLE " button you  
can select one or several programs  
of NORMAL HEAVY QUICK WASH  
and SPIN ONLY.  
Remarks: After pressing "Power On/Off" to connect power supply, if the washing  
machine lasts idle more than 5 min, it would automatically shut off the supply.  
8
 
b Steps of using the operation buttons and description  
of the steps  
HWMP50F  
WASH CYCLE  
FUZZY  
TEMP SELECT  
POWER  
ON/OFF  
SOAK  
WASH  
RINSE  
SPIN  
NORMAL  
HEAVY  
WARM  
HOT  
TIME  
REMAINING  
START  
PAUSE  
QUICK WASH  
SPIN ONLY  
COLD  
WASH  
CYCLE  
WATER  
LEVEL  
1.Push "POWER ON/OFF"button to switch on the power  
POWER  
ON/OFF  
2.Push " WASH CYCLE " button to select suitable  
automatic program  
WASH  
CYCLE  
After the power is switched on, " NORMAL " is automatically set. To select other  
fully-auto program, please push the " WASH CYCLE " button till the corresponding  
indicator is on. Refer to the " WASH CYCLE " button on Page 8.  
Program select  
Wash  
temperature  
The running process(the digitron  
displays the running process)  
The display  
of digitron  
Program  
Application  
Washing for normal  
laundries  
Warm  
SOAK (  
)
RINSE (  
)
NORMAL  
Washing for coverlet  
bigger laundries  
RINSE (  
RINSE (  
)
)
Hot  
HEAVY  
Washing the woollen  
silk textiles  
QUICK WASH  
Cold  
Only spinning the  
cloth wet or washed  
by hand (first draining,  
then spinning)  
SPIN  
SPIN(  
)
ONLY  
Note that the water temperature shall not exceed 60  
.
9
 
When "NORMAL" program is selected, the washing machine will perform  
fully-automatically controlled fuzzy program to set water level, water flow  
and wash duration according to the cloth nature and weight.  
3 Push the " WATER LEVEL "button,select suitable water level  
WATER  
LEVEL  
After switching on the power, the washing machine will execute fuzzy program  
automatically to detect the cloth.  
After defection, it can set the water level automatically. To select other water level, first  
push the " START/PAUSE " button, then push the "WATER LEVER" button to set the  
water level.  
4 Push the "START/PAUSE " button  
START  
PAUSE  
6 Finish washing  
After finishing wash it will switch off power automatically.  
10  
 
7 Disposal after washing  
After using, please clean the lint and foreign materials of the lint filter  
etc. in time. Otherwise it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
The lint filter must be used during  
washing.  
Clean the detergent box and set it on  
the control panel seat.  
It must be cleaned in time after each  
using.  
Lint filter:  
1.Pull it up to dismantle.  
2.Push it down to install.  
3.Clean the filter screen after  
washing.  
Dismantle  
Install  
Dismantle  
Install  
Clean  
The filter screen of the water inlet valve  
is likely to be blocked by foreign  
materials and influence the water inlet.  
Please clean it with brush every two  
months.  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
Do not wipe it with thinner, petrol,  
alcohol etc.  
Petrol  
Thinner  
Alcohol  
1.After washing, close the water faucet. ( If needed, you can dismantle the water  
inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water  
completely after each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open  
the top lid for some time (about 1 hour), then close the top lid.  
11  
 
Trouble-shooting Answer to question  
(If there's breakdown, please pull off the power plug before checking) The  
following phenomena are not breakdowns sometimes. Please confirm again  
before sending it to repair. If there are real breakdowns, please come to the special  
maintenance department or after-sale service department of our company. Do not  
repair it by yourself.  
Phenomenan  
The reason  
How to settle  
Close the top lid.  
The top lid is opened  
during reserve procedure.  
The digitron displays E0.  
The drainage cannot work,  
or is too slow.  
The digitron displays E1.  
Is the drain hose  
blocked?  
Clean the foreign material. Open  
and close the top Lid Once.  
It stops running in midway.  
The digitron displays E2.  
The top lid is not closed.  
Close the top lid.  
Reorder the laundries.  
Close the top lid.  
The machine will start  
running after 10 seconds  
of being placed horizontally.  
The safety switch acts,  
and the spinning cannot  
work. The digitron  
displays E3.  
Are the laundries put  
slantingly?  
Is the machine slanting?  
Open the water tap. Push  
the start/Pause button once.  
Clean the water inlet valve  
then push the start/Pause  
button once.  
Push the sStart/Pause  
button once.  
Is the water tap opened, or  
is there water supply failure?  
Is the water inlet valve  
blocked?  
The water filling does  
not work, or is slow. After  
about 30 minutes later,  
the digital displays E4.  
Is the water pressure too  
low?  
Please contact the  
after-sales service  
department.  
The water level sensor is  
bad.  
The digitron displays E6.  
Please use it when there's  
power supply.  
Insert the power plug  
tightly.  
Is there power failure?  
Not wash  
The machine  
does not act  
Is the power plug inserted  
tightly?  
Fill water to the preset  
position.  
Is the water level reached  
preset position?  
Insert the power plug  
tightly.  
Is the power plug inserted  
tightly?  
Close the top lid.  
Set the laundries flat.  
Is the top lid closed reliably?  
Are the laundries set flat?  
Not spin  
Adjust the machine to be even  
Reorder the laundries and  
close the top lid.  
Is the machine slanting?  
Are the laundries put slantingly  
in spinning?  
There's abnormal sound  
inside the machine  
Remove the foreign materials.  
Are there any foreign materials?  
Is the screw of the jointer of  
water inlet hose loose or awry?  
The water tap leaks  
Fasten the screw of the  
jointer properly.  
12  
 
Common phenomena  
Phenomena  
The spinning is intermittent  
when it starts.  
Explanation  
Balance the laundries to avoid slanting.  
The wash procedure pauses.  
The cloth sensor is detecting , it will add  
water after about 48 senconds.  
The program is setting the drain time ,  
certain period is needed before it starts  
spinning.  
Select spin program, but it does  
not work.  
There may be some water  
flowing out of the drain hose in  
the first use of the machine.  
It is the water remained performance  
inspection by the factory.  
Packing list  
Name  
Quantity  
Storage position  
One  
User's manual  
Inside the document bag  
One  
Warranty card  
Inside the document bag  
Inside the accessory bag  
Components of the  
water inlet hose  
Connect to the  
Two  
washing machine  
Connect this end  
to the tap  
Lint filter  
Inside the document bag  
Inside the accessory bag  
One  
Tapping screws  
Bottom plate  
Eight  
Between the upper cushion of the  
washing machine package and the  
upper seal of the package carton.  
One  
One  
Automatic washing  
machine  
13  
 
Specification table  
Fully Automatic Washing Machine  
Type  
HWMP50F  
220-240V  
380W  
Model  
50Hz  
Rated voltage/frequency  
Rated washing power  
Rated spinning power  
Weight  
300W  
About 35kg  
L 520 W 530 H 890  
Dimensions (mm)  
0.03Mpa-1.0MPa (when water temperature is  
70 ~90 , the water inlet pressure of hot water  
shall not exceed 0.4MPa)  
Water inlet pressure  
 

Guardian Technologies Portable Generator QP 40 User Manual
Haier Freezer SD 242 User Manual
Hampton Direct Indoor Fireplace H25 LP1 Propane User Manual
HANNspree Computer Monitor HF205 User Manual
Harman Kardon Stereo Receiver AVR 240 User Manual
Hearth and Home Technologies Stove CASTILE CSB User Manual
Hotpoint Refrigerator HTM16BBR User Manual
HP Hewlett Packard Personal Computer 23 D030 User Manual
HP Hewlett Packard Server BL685c User Manual
Husqvarna Lawn Mower 2754 GLS User Manual