Portable Icemaker
User Manual
HPIM35W
•
•
Quality Innovation Style
English
Polarized Plug
This appliance is equipped with a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. This is a safety feature. If the plug does not fit fully
into the outlet, try reversing the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way. Do not defeat the
safety purpose of this polarized plug.
A short power-supply cord is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. Avoid the use of an extension cord
because it may overheat and cause a risk of fire. However, if you must use an
extension cord, the marked electrical rating should be at least as great as the
electrical rating of the appliance. The extension cord should be a minimum size
of No. 16AWG and rated no less than 1800W. The longer cord should be
arranged so that it will not drape over the counter-top or tabletop where it can
be pulled on by children or tripped over.
Thank you for using our Haier
product. This easy-to-use manual
will guide you in getting the best
Model number
use of your icemaker.
Date of purchase
Remember to record the model and
serial number. They are on a label
in back of the icemaker.
Staple your receipt to your manual.
You will need it to obtain warranty service.
2
English
Table Of Contents
PAGE
Important Safeguards ....................................................................1
Parts and Accessories......................................................................4
Operating Instructions....................................................................5
Pre-Operating Instructions....................................................................5
Operating Instructions..........................................................................6
Operating Process ..............................................................................7
Cleaning and Maintenance ............................................................8
Troubleshooting Guide ..................................................................9
Limited Warranty ..........................................................................10
3
English
Parts and Accessories
1. Ice Storage Basket
2. Ice Pusher
7. Pad
8. Water Pump
9. Water Storage Tank
10. Lid
3. Evaporator Rods
4. Water Box
5. Compressor
6. Power Cord
11. Control Panel
12. Drainage Plug
4
English
Operating Instructions
Pre-Operating Instructions
1. The incline angle of the cabinet should not exceed 45˚ during
transportation. Do not turn the icemaker upside-down. Doing so
could cause the compressor or refrigerating system to operate
incorrectly.
2. The icemaker should be placed on a dry and level surface away
from any heat sources and corrosive gases.
3. Before using the icemaker for the first time, wait 12 hours after
positioning in its proper place.
4. Make sure that the unit is unplugged. Clean the inside of the
icemaker thoroughly by wiping it with a soft, damp cloth. Wipe the
inner liner, ice collecting tray, water box, ice pusher and evaporator
rods.
5
English
Operating Instructions
1. Open the lid, remove the ice storage basket, and fill the water
storage tank with drinkable (tap, purified or bottled) water. Replace
the ice storage basket. Make sure that the water level does not reach
the bottom of the ice storage basket. Close the cover.
Note: During the operation process, if the level of water in the water
storage tank becomes too low, the machine will automatically
stop operating and the LCD will display “POUR”.
2. Plug the unit into a grounded outlet. Push the
control panel to turn on the machine.
button on the
3. Press the
button to select the delayed start time in half-hour
increments of up to 12 hours. Or to begin the ice-making process
immediately, skip to the next step.
4. Press the
button to select the desired size of the ice cubes. The
LCD display will indicate the setting.
*
= Small ice cubes (Approx. 9 minutes)
** = Medium ice cubes (Approx. 10 minutes)
*** = Large ice cubes (Approx. 11 minutes)
5. Press the
button to begin operation.
Note: To stop the operation, press the
button again.
6
English
Operating Process
1. Water is pumped from the water storage tank to the water box, which may
take up to 48 seconds.
2. The ice-making cycle begins when the evaporator rods are dipped into the
water box.
3. It will take approximately 9-11 minutes for each ice-making cycle, depending
upon the size selected. The larger the size, the more time is needed to make
the ice. After the cycle is finished, the water box will tilt forward and the
remaining water will flow back into the water storage tank. The evaporator
rods will then release the ice cubes.
Note: If the ambient temperature is below 59˚ F, then small or medium ice
cube sizes are suggested to prevent ice cubes from fusing together.
4. Approximately 60 seconds later, the water box will tilt backwards and the ice
pusher will push the ice into the ice storage basket. After the water box flips
back to its original position, the next ice-making cycle will begin.
5. When the maximum capacity of ice cubes is collected and the ice reaches the
temperature sensor, the icemaker will automatically stop operating. The LCD
display will show “FULL”. Remove the ice from the ice storage basket. Then
replace the basket into the machine, making sure that the basket is pushed
back to its original position. This will ensure that the temperature sensor is
above the basket so that the machine operates properly.
6. To continue making ice, check that there is water in the water storage tank. If
there is no water in the water storage tank, and no water is being pumped
into the water box, the operation will stop and the LCD display will show
“POUR”. Fill the water storage tank with water and press the
icemaker to begin operating again.
button for the
7. When the LCD display shows “----“, press the
button again to restart the
machine. If the compressor stops for any reason such as water shortage, too
much ice, power off, etc., do not restart the machine right away. Wait at least
3 minutes before restarting the machine.
7
English
Cleaning and Maintenance
1. To ensure the cleanliness of the ice cubes, the water in the water
storage tank must be replaced every 24 hours.
2. The filter (located at the bottom right of the water storage tank)
needs to be cleaned regularly so that impurities in the water do not
enter the water pump and affect the normal operation of the
machine. The filter may be cleaned with a small flexible toothbrush.
3. Unscrew the drainage plug to release the remaining water in the
water storage tank when the icemaker will not be used for an
extended period of time.
4. Clean the icemaker regularly. When cleaning, make sure that the
power has been turned off. Remove the plug from the outlet and
remove the ice cubes. Use a mild detergent diluted in water and
wipe with a soft towel or sponge to clean the inside and outside
surfaces of the unit. Do not spray any strong cleaning solutions on
the unit. Avoid using harsh liquids such as acids and gasoline to
clean the unit.
5. When plugging or unplugging the unit, pull directly on the plug.
Never pull on the power cord.
6. If the power cord is damaged, please contact an authorized service
center for repair or replacement.
7. To avoid lime scale buildup, drain any remaining water from the
water storage tank after each use and clean the appliance once a
week.
Specifications
Electric Shock Protection: Class I
Power Input: AC120V/2.3A
Dimensions: 15.75”(w) x 14.17”(d) x 15.98”(h)
Refrigerant: R134a
8
English
Troubleshooting Guide
Problem
Possible Causes
Solution
The compressor
makes a buzzing
noise when the
machine is on.
The voltage is lower than
required. This unit requires a 120v and restart.
minimum of 120 volts.
Turn off the icemaker. Make sure the voltage is
The LCD display
shows “POUR”.
There is no water in the waterFill the water storage tank with water and
storage tank or the water
level is too low.
restart the unit.
The filter is blocked.
Clean the filter with a soft, flexible toothbrush.
The LCD display
shows “FULL”
There is too much ice in the Remove some ice from the ice storage basket.
ice storage basket.
The temperature is too low. Place the icemaker in a warmer place.
There is no display The fuse is blown.
on the LCD screen.
Replace the fuse.
The ice cubes are
fusing together.
The ice-making time is too Stop the machine and reset the ice-making
long.
time. Start the machine after the ice block
melts.
The water temperature in the Replace the water in the inner liner. The sug-
inner liner is too low.
gested water temperature is 44.6˚ to 77˚F.
Water is not freezing The refrigerant is leaking.
during the normal There is a block in the refrig-
Contact an authorized service center.
ice-making cycle.
erating system.
9
English
Limited Warranty
Full One Year
This warranty covers all defects in
Before calling, please have the
workmanship or materials for a period following information available:
of 12 months from the date of pur-
chase, provided you are able to pre-
sent a valid proof-of-purchase (the
original receipt)
Model number of your appliance. The
name and address of the store you
purchased the unit from and the date
of purchase. A clear description of the
problem.
Exceptions: Commercial or Rental Use
Warranty is 90 days from date of origi- Haier will repair or replace any part
nal purchase.
free of charge including labor that fails
due to a defect in materials or work-
manship, or replace with a compara-
ble model.
This warranty covers appliances within
the Continental United States, Puerto
Rico and Canada.
THIS LIMITED WARRANTY IS
What is not covered by this
warranty:
Damage from other than normal use
or improper installation.
Damage from misuse, abuse, accident,
alteration, lack of proper care and
maintenance.
Failure caused by build-up of food
matter or water deposits.
GIVEN IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR,
INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is
exclusive and is granted in lieu of all
other remedies.
Product, whose rating label has been
removed or altered.
Product serviced by other than autho-
rized service center.
This warranty does not cover incidental
or consequential damages, so the
abovelimitations may not apply to you.
Some states do not allow limitations on
how long an implied warranty lasts, so
the above limitations may not apply to
you.
This warranty gives you specific legal
rights, and you may have other rights,
which vary, from state to state.
Replacement or repair of household
fuses, circuit breakers or wiring.
Labor, shipping charges and replace-
ment of defective parts beyond the ini-
tial 12-month period.
Do not return this product to the store.
If you need assistance with this prod-
uct, please contact "Haier Customer
Satisfaction Service at 1-877-337-3639
between 9:00 AM and 5:00 PM (EST)
Monday to Friday.
Haier America
New York, NY 10018
10
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please contact the "Haier Customer Satisfaction
Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
120V, 60 Hz
Made in China
Haier America
New York, NY 10018
Printed in China
HPIM35W
Part# RF-8888-395
Issued: June-06
|