Haier Cell Phone D1200P User Manual

The information in this User Guide is based on the production standard  
model of the D1200P CDMA mobile phone. As Haier Telecom Company  
follows a policy of continuous development, the company reserves the  
right to make adjustments, changes or revisions to all information given  
herein, without prior notice. Haier Telecom Company makes no warranty  
of any kind with regard to the contents given, including, but not limited to,  
the implied warranties of merchantability and fitness for  
a
particular  
purpose. Furthermore, Haier Telecom Company shall not be liable for  
errors contained herein or for incidental or consequential damages in  
connection with the furnishing, or use of this material. No portion of this  
document may be photocopied, reproduced, or translated to another  
language without the prior written consent of Haier Telecom Company.  
This User Guide is edited and printed by the Haier Group Company.  
Copyright@2007 Haier. All rights reserved.  
 
Contents  
1.Essential information ....................................................................................1  
2. Handset guide ..............................................................................................5  
3. Menu overview ...........................................................................................21  
4. Input method ..............................................................................................66  
5.USB windows device driver installation guide.............................................68  
6. Modem installation guide............................................................................76  
7. Frequently asked questions (FAQ).............................................................79  
8.Trouble shooting.........................................................................................81  
 
 
1.Essential information  
Given here is essential information that will help you in the optimum operation of  
your mobile phone. By adhering to these guidelines you will be protecting  
yourself from unnecessary personal or financial damages or infringements of  
the law. Kindly read the User Guide in its entirety for complete information.  
1.1 Safety guidelines  
Traffic regulations  
Traffic and road safety regulations prohibit your usage of the phone while driving.  
If, however the need arises, please do make use of the hands-free settings or  
move your car to the side of the road out of the flow of traffic. In case you use an  
air bag equipped vehicle, please do not place your phone in the air bag  
deployment area, it could result in serious personal injury and possible property  
damage.  
Switch off your phone at filling stations and sensitive areas  
Areas with a potentially explosive atmosphere are often, but not always, clearly  
marked. These include fuelling areas such as fuel filling stations, below decks  
on boats, fuel or chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air contains  
1
 
chemicals or particles, such as grain, dust, or metal powders; or any other area  
where you would normally be advised to turn off your vehicle's engine. Electric  
or static sparks in such areas could cause an explosion or fire resulting in  
serious injury or even fatalities.  
Switch off your phone on aircraft  
Follow airline advisories on phone usage. Radio Frequency emissions from  
wireless devices such as your phone can cause electronic interference or  
disturbance in the delicate communication and control electronic equipment of  
the aircraft.  
Switch off your phone in the hospital  
Switch off your phone in healthcare facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or healthcare facilities may be using  
equipment that could be sensitive to external RF energy.  
Pacemakers and medical implants  
The Health Industry Manufacturers Association (USA) recommends that  
minimum separation of six inches (15 centimetres) be maintained between a  
handheld wireless product and medical implants (electronic) such as  
a
a
Pacemaker to avoid potential interference with the implant. These  
recommendations are consistent with the international recommendations  
2
 
governing the usage of wireless technology.  
Advisory for persons with Pacemakers:  
ALWAYS keep the phone more than six inches from your pacemaker when  
the phone is turned on.  
Do not carry the phone in a breast pocket.  
Preferably use the ear opposite the pacemaker to minimize the potential for  
interference.  
If you have any reason to suspect interference is occurring, switch off your  
phone immediately.  
Other medical devices  
If you use any other personal medical device, do consult the manufacturer of the  
medical device to determine if it is adequately shielded from external RF energy.  
Your physician may be able to assist you in obtaining this information.  
Follow mandatory signs  
Always follow phone etiquette in public places. Switch off your phone where the  
use of mobile phones is explicitly forbidden, as it may be a safety risk or might  
infringe on the law.  
Emergency calls  
Emergency calls can be dialled at anytime - even if the handset is PIN locked or  
3
 
has no RUIM card.  
Emergency call procedure:  
Type in the local emergency number and press the send key.  
Emergency call numbers are: 100/101.  
Electronic devices  
Most modern electronic equipment is shielded from Radio Frequency (RF)  
energy emissions. However, certain electronic equipment may not be shielded  
against the RF signals emitted by your phone and care must be taken in usage  
of your phone next to sensitive electronic equipment.  
1.2 Care and maintenance information  
Your phone is an electronic device that should be treated with due care during  
usage. The guidelines given here will help you in caring for your phone and  
keep it under warranty coverage.  
Protect your phone from dust, temperature, humidity and other extreme  
environmental conditions as it will affect the performance or damage the  
instrument. Do not use or store your phone in a low temperature environment as  
moisture will condense in the phone and damage the circuit board.  
Avoid striking, shaking or causing physical shock to the phone.  
4
 
Protect your phone from rain, spilled beverages or other forms of moisture  
that can damage the electronics of your phone.  
Use the batteries and fittings manufactured by Haier Telecom Company only.  
The use of other fittings may cause dangerous accidents and void all warranties.  
Do not disassemble the phone or its accessories. If service or repair is  
required, contact a Haier authorized service centre.  
Do not inadvertently cause short-circuit by placing metal or conductive  
material across or on battery terminals.  
Keep your phone and accessories out of the reach of young children.  
Do not use chemical solvents or detergents to clean your phone.  
2. Handset guide  
5
 
2.1 Keypad  
2.1.1 Power /End key  
The red key on top right corner of the keypad is power key. Pressing and  
6
 
holding the key can switch on/off the mobile phone. Pressing the key once can  
end a call during a phone call, or pressing the key twice can reject an incoming  
call. Pressing the key in the menu can also return to the idle mode.  
2.1.2 Send key  
The green key on top left corner of the keypad is the send key. You can dial or  
answer a call with the key. In idle mode, pressing the key can lead you to the  
recent calls list.  
2.1.3 Left/ Right soft key  
The Left/Right soft keys are used to carry out the corresponding operation of  
last line on display screen, in accordance with the procedure are adopted to  
acquire different functions.  
In idle mode, press key to enter the Menu function, press key to enter the  
Names function.  
2.1.4 Four ways navigation key  
The navigation keys can control the cursor directions. Left/right key can move  
the cursor in text editing mode left /right. Up/down key can scroll the cursor in a  
list up/down.  
In idle mode:  
7
 
Up key: Press this key to enter the Profiles menu directly.  
Left key: Press the key to enter the Scheduler menu directly.  
Right key: Press the key to enter the Messages menu directly.  
Down key: Press the key to enter the Names list.  
2.1.5 OK/Hot key to WAP  
The OK/Hot key places within the 4-way navigation keys. Pressing this key in  
idle mode allows you to access the WAP menu.  
Pressing the key in the menu mode confirms the selected options or enters the  
next menu.  
2.1.6 # (hash) key  
In idle mode, you can press and hold key to switch the Vibrate Mode on or off.  
In text editing mode, press  
key to change input methods.  
2.1.7 * (star) key  
In idle mode, press and hold  
key to lock the keypad. By pressing any key, the  
screen displays message 'Keyguard active, press 123 to unlock keypad'.  
Then press 123 to unlock.  
In text editing mode, press  
2.1.8 Numeric keys  
key to switch to symbol mode.  
8
 
Pressing these keys can enter the digits 0 to 9 (in idle mode or in number-  
inputting mode) or some associated characters (text editing mode) and perform  
associated functions (in a list).  
2.1.9 Volume side key  
You can adjust the earpiece volume using side keys directly during a call or in  
idle mode except vibrate only mode  
.
2.2 Idle mode screen  
2.2.1 Screen indicators and icons  
Depending on your wireless service provider, some or all of the following  
indicators and icons may be displayed on your phone's screen.  
When the phone is powered on, the following icons may be displayed:  
2.2.1.1Battery level indicator  
The Battery Level Indicator shows the representative charge held by the  
phone's battery. Bar segments within the Battery Level Indicator show the level  
of charge held. All bars visible indicate a full charge. If only one or two bars are  
visible, it means the battery is low.  
2.2.1.2 New message  
The icon is displayed on your screen when a new message arrives. The new  
9
 
message icon disappears when you read all the unread messages.  
2.2.1.3 Full message  
When the SMS storage is full, the icon appears and the phone display shows  
'SMS capacity full. Pls erase msg to proceed'  
One or more messages must be erased before the new message can be stored.  
2.2.1.4 Alarm clock  
The icon appears when the daily alarm or the alarm for the specified date and  
time is set.  
2.2.1.5 Scheduler  
The icon appears when the scheduler is set.  
2.2.1.6 Network  
Composed of two parts. The left part indicates that the mobile phone is duly  
registered to a network. The right part shows the signal strength.  
2.2.1.7 Voice message  
The icon indicates that the voice mail has a voice message (This function must  
be supported by your network).  
2.2.1.8 Profiles  
You can easily alter the phone tone (e.g. the ringer volume, earpiece volume,  
etc.) according to your environment.  
10  
 
When a profile is available, the icon corresponding to the profile name is  
displayed in idle mode:  
Vibrate only: For use when vibrate only is needed.  
Silent:For use when silence is needed.  
General:Is the default setup.  
Outdoor:For use in the outdoor.  
Meeting:For use in a meeting. The default setup is the silent mode.  
Headset:For use when insert the headset.  
2.2.2 Idle mode screen events  
2.2.2.1 Idle mode  
The mobile phone enters idle mode without any operations after the phone is  
switched on. You can view the current time and date in idle mode. You can dial a  
number by pressing  
2.2.2.2 Calling  
key if you input a telephone number.  
You can make a phone call after the number is dialled.  
2.2.2.3 Missed calls  
The missed calls and their numbers will be shown on the screen in idle mode.  
Press key to view the list.  
2.2.2.4 New messages  
11  
 
When the new message is received:  
1.Your phone makes alert tones (ringer, vibration or silence).  
2.If the keypad is unlocked, your phone display will show 'You have 1 new  
message!'. Press  
again to operate options. Press  
new message-prompting icon is displayed on the screen.  
key to view the message's contents and then press  
key  
key or key to return to the idle mode, the  
3.If the keypad is locked, your phone display will also show 'You have 1 new  
message!'. But you can't view the contents.  
Note: If the message is urgent /emergency, your phone displays ' You have 1  
new message (Urgent/Emergency)! '.  
2.3 Installing Battery and RUIM card  
2.3.1 Installing the battery  
Aim the protruding part at the bottom of the battery at the groove of the phone.  
Push the top part of the battery to the phone and press down the lock until it is  
locked.  
2.3.2 Removing the battery  
Switch off the phone, push up the lock at the top of the battery to uplift the top of  
the battery and separate it with the main board.  
12  
 
13  
 
2.3.3 Installing the RUIM card  
Purchase  
a
RUIM card from network operator. Your phone number and  
registration information are stored in your RUIM card. Your RUIM card can be  
used in any a CDMA phone. Your number and information will not change.  
Make sure to switch off your phone before taking out the battery.  
Make the metal face of the RUIM card down and put it conferring the level of  
the card. Then install the battery.  
2.3.4 Removing the RUIM card  
Remove the battery after switching off your phone.  
Remove the RUIM card.  
Install the battery.  
14  
 
2.4 Charging the Battery  
The D1200P can be charged either when it is switched on or off.  
1.Plug the charger transformer into a standard outlet.  
2.Insert the charger output plug into charging connector of the bottom of the  
phone.  
3.The rolling of the electric quantity bar indicates that the phone begins to  
charge.  
4.When the battery level full and stop rolled, the phone will display 'Battery full'.  
5.After charging is complete, switch off the electric supply and pull out the  
charger's jack.  
Note:  
When the battery level is low and only a few minutes of talk time remain, a  
beep is heard, the battery icon flashes and the phone displays 'Battery Low,  
please recharge soon!'. When battery is drained completely, the phone  
displays 'Battery too low, Power off soon!'  
When the battery is completely discharged, your phone will turn off.  
The battery can be charged whenever you want. However, using your phone  
while charging can increase the charging time.  
15  
 
It is recommended that you charge the battery for three hours (full charging  
period) before you use it.  
Do not pull out the plug of the charger during charging to avoid electrical  
damage to the phone and the charger.  
2.5 Headset  
If you connect the headset with the phone, it will be to activate headset mode or  
to match the volume of headset with that of mobile phone.  
Increase or decrease the volume through up and down side key during call.  
If you plug out the headset from the phone, the phone will return to normal  
mode automatically.  
2.6 Switching a Phone On/Off  
Press and hold down the red key  
If you switch the phone on and there is no RUIM card inserted, the phone  
displays ' Please insert RUIM '. Press key to only dial emergency call.  
to switch your phone on or off.  
After inserted, the phone will check whether the RUIM card is valid.  
Then the screen displays the following messages:  
Enter PIN --- Request to input the RUIM card PIN code (if required).  
Enter Lock code --- In idle mode, press  
key to request to enter the phone  
16  
 
lock code (if required).  
Note:  
If the RUIM card is invalid, the phone displays 'RUIM card rejected', please  
contact your network service provider.  
In the instances above mentioned, press  
key to only dial emergency call.  
2.6.1 Entering your RUIM card PIN Code  
You can set protection code (PIN CODE) in order to prevent random using of  
your phone by others. Each time you restart your phone, the phone will prompt  
you to enter PIN code (The default PIN is 1234). In this condition, press  
to dial emergency call.  
key  
Input PIN code (supplied by network service provider. For security, an * will be  
displayed on the screen to in place of the number you enter.)  
If you make a wrong enter, you can press key to re-enter the code.  
Press key, and after a short time, your mobile phone will confirm its  
correctness and begin to register on the network. Once the network name is  
shown on the screen, you can call or access any of the functions of your phone.  
If no network name is shown on the screen, you may need to register again.  
Note:  
If you have entered the PIN code incorrectly continuously for max retry limits,  
17  
 
the RUIM card will be automatically locked. In this condition, the phone will  
prompt for PUK (PIN Unlocking key). You can get the PUK from your mobile  
phone service provider.  
2.6.2 Entering your Phone Lock Code  
The phone lock code is used to protect your phone from unauthorized use.  
It can be set automatically to lock your phone each time it is switched on or  
when in idle mode. In this condition, you can only dial emergency call.  
You must press key to enter correct phone lock code, and then access the  
phone menu (The default is 000000).  
The PIN code and Phone lock code can be changed.  
2.7 Dialling a number  
To dial a number, your phone must be switched on and unlocked.  
You can use the function only after the network-prompting icon is shown on the  
screen.  
2.7.1 Using the digits keys  
Enter district code and telephone number or mobile phone number, press key  
to dial.  
Press  
key to delete a typed number. Press and hold  
key to delete all  
18  
 
numbers.  
To indicate that you are dialling a number, the word Calling displays the  
screen.  
If the call is not answered and you want to end the call, press  
key.  
If the call is connecting, the display will change to In Call press  
end the call.  
key to  
2.7.2 Dialling a number using the Recent Call List  
The mobile phone can store no more than 30 latest call logs (incomings,  
outgoings and missed calls).  
1.In idle mode, press  
2.Scroll the list by pressing the up/down navigation key and select an entry.  
3.Press key to dial.  
key to enter the recent calls list.  
2.7.3 Dialling a number using the Contacts List  
1.In idle mode, press down navigation key or press  
list.  
key to enter the contacts  
2.Scroll the list by pressing the up/down navigation key and select an entry.  
3.Press key to dial.  
2.7.4 Dialling a number using Speed Dial  
19  
 
Speed dial is a fast way to call one of your special numbers. See 'Speed dial'  
menu.  
2.7.5 Making an International call  
Press and hold  
Enter the country code, area code (without prefix zero) and phone number.  
Press key to dial.  
key until ‘+’ appears on screen.  
2.7.6 Ending a call  
You can end a call at any time by holding down the  
terminated.  
key till the call has been  
2.8Receiving a call  
When you receive a call, the phone will alert and the word 'Incoming call'  
displays on the screen. If your phone has Caller Line Identification and the  
calling party is in Contacts list, the caller's number and name also appears.  
Press key or any key (need setting) to answer the call. Please refer to 'Any  
key answer' menu.  
Press  
key twice to reject the incoming call.  
2.9 During a phone call  
After pressing  
key, user can view following contents given below:  
20  
 
2.9.1 Mute  
Temporarily turns the microphone off during a phone call. Reselect this option to  
resume your conversation.  
2.9.2 Names  
This function allows you to access the Names menu.  
2.9.3 Menu  
By using this feature, you can directly enter the menu list.  
3. Menu overview  
Your RUIM card can be used in the handset for accessing the menu options  
detailed below. If the RUIM card is not inserted, you can still make SOS  
(emergency) calls.  
Press  
key to enter the main menu option in idle mode. The main menu  
consists of 9 icons. You can select any icon with navigation key and press key  
to enter submenu.  
Note: You can also directly press 1 to 9 to enter the corresponding submenu.  
3.1 Messages  
You can send, receive, save or erase the message by using messages menu.  
21  
 
3.1.1 Write message  
Allow user to edit text message. When composing text messages, check the  
number of characters allowed in the top right corner of the message. Per  
message can contain up to 160 characters. If you cross the limit, the phone  
prompts with a 'Sorry, No more space!' pop-up message.  
Press numeric key to input corresponding characters.  
Note: Press and hold  
key to delete entire message and start a new one.  
Press key to access the following Message options:  
3.1.1.1 Send  
After writing the message, press Send option to input the recipient's number or  
retrieve a number from the Names list. Then select Send option to send the  
message.  
3.1.1.2 Insert templates  
When composing an SMS message, you can use the Insert templates option,  
scroll through a list of prewritten messages and select the one you want to insert  
into your new text message.  
3.1.1.3 Send to group  
One message can be sent to a group included one or more people (no more  
than 10).  
22  
 
You can use the Send to group option, scroll through a list of groups and select  
the one you want to send.  
3.1.1.4 Insert number  
When composing an SMS message, you can use the Insert number option,  
scroll through names list and select the number you want to insert into your new  
text message.  
3.1.1.5 Save message  
You can use the save message option to save the contents of edited to draft box.  
3.1.2 Inbox  
When you receive a new message, the new message-prompting icon will be  
displayed on the LCD right corner.  
Enter the inbox menu, the current message position and the total number of  
received messages will be displayed at the first row of the screen. If there are  
no messages, 'No message' will be displayed. If there are messages, the new  
messages will be displayed first, followed by the old. Once you have read a new  
message, it will become old.  
You can press up/down navigation key to highlight the message you wish to  
view.  
The message icon is displayed. See 'Table [1]'.  
23  
 
The sender's phone number is displayed. When the sender's phone number is  
stored in the contacts list, the sender's name is displayed instead of the phone  
number.  
Press  
key to display the whole message details, the message contents,  
the phone number who sent it and when it was received. Here pressing key  
allows you to call the sender.  
Table [1]: The message icons in Inbox  
24  
 
From the message view, you can choose to access the following options:  
3.1.2.1 Reply  
You can reply to the sender after opening the received message.  
3.1.2.2 Forward  
You can forward the received message to desired number.  
25  
 
3.1.2.3 Use number  
If the Numbers available haven't been stored into the contacts list, you can save  
it.  
If the number has been stored into the contacts list, the phone displayed 'This  
number already exists'.  
3.1.2.4 Erase  
Allow you to erase the selected message.  
3.1.2.5 Connect URL  
this network.  
3.1.3 Outbox  
You may store sent messages and unsent messages to an outbox list according  
the MSG Settings. You can retrieve these messages and forward them to other  
contacts, or resend the message, or erase the message if it is no longer  
required. Erasing messages from the outbox can free up additional memory on  
your phone.  
3.1.4 Draft  
You may store saved messages to a draft list. You can retrieve these messages  
and send them to any contact or erase the message if it is no longer required.  
26  
 
Erasing messages from the Draftbox can free up additional memory on your  
phone.  
3.1.5 Voice mail  
If you subscribe to voice mail, your service provider will furnish you with a voice  
mailbox number. You need to save this number to your phone to use voice mail.  
By setting the call forwarding function, the incoming call is forwarded to your  
voice mail.  
When you receive a voice message, your phone starts beeping or displays a  
message, or both. If you receive more than one message, your phone shows  
the number of messages received.  
Listening to voice messages, the user needs to press and hold the key 1  
(Default speed dial for Key 1 is Voice mail).  
Note: This function needs to be supported by your network  
3.1.6 Templates  
You can set no more than 21 quick texts, in which 9 quick texts are by default  
other 12 quick texts can be edited by user.  
Press up/down navigation key to scroll the desired message and press  
to access the following options:  
Edit: Allow you to modify the text and then save it.  
key  
27  
 
Erase: Erase the selected quick text.  
Add new: Enter the text-editing interface and then save it.  
Send: You can send the selected quick text.  
3.1.7Msg groups  
You can set no more than 5 groups, and you can add the member from the  
phone memory and the RUIM card memory names to any group.  
By pressing  
3.1.7.1 Send  
Allow you to write a new message and send directly to all members of the  
key you may enter the following menus:  
selected group.  
3.1.7.2 View  
Allow you to view the name list of the group. By pressing  
key, you can add a  
member, send message to the selected member, send to all members of the  
group, replace the selected number with another number, remove the selected  
member, or clear the group.  
3.1.7.3 Rename  
You can change a group name into a wanted name.  
3.1.7.4 Clear group  
You can clear the members of the selected group.  
28  
 
3.1.7.4 Clear all groups  
You can clear the members of all groups.  
3.1.8 Erase msgs  
Access the Erase messages option to specify exactly which type of message  
you want to erase.  
By selecting Inbox, you can erase messages from the inbox folder.  
By selecting Outbox, you can erase messages from the outbox folder.  
By selecting Draft, you can erase all the messages in the draft folder.  
By selecting Erase all read messages, you can erase all the read messages.  
By selecting Erase all, you can quickly erase all messages stored in your phone  
and RUIM card memory.  
3.1.9 Settings  
You can change the message settings in this menu.  
3.1.9.1 Auto save  
Allow you to select 'On' or 'Off' option. If you select 'On' option, your phone will  
save the sent or unsent messages in the Outbox (subject to memory available).  
3.1.9.2 Auto delete  
Allow you to select 'On' or 'Off' option. If you select 'On' option, the oldest  
message is deleted automatically when the memory becomes full.  
29  
 
3.1.9.3 Deferred delivery  
Allow you to select 'Immediate', 'After 1hr', 'After 5hr' or 'After 1day' option. You  
can choose the time when you want your message to be delivered.  
Note: This function is depended on the service provider's network.  
3.1.9.4 Priority  
The function allows you to select Normal, Urgent or Emergency.  
3.1.9.5 Validity period  
Allow you to select 'Default', '30 minutes', '1 hour', '2 hours', '12 hours', '1 day', '2  
days', '3 days' options. You can set the validity period for your messages, that is,  
how long they should be available to the receiver.  
3.1.9.6 Voice mailbox  
The function allows you to edit or save the voice mailbox number.  
3.1.9.7 Broadcast  
Allow you to select 'On' or 'Off' option. If you select 'On' option, you can receive  
broadcasted messages. Service providers usually advertise to all subscribers on  
new schemes, tariffs, or special offers through broadcasted messages.  
3.1.9.8 Delivery report  
You can choose On or Off to set the status of the message you have sent, if you  
select On, the information that you have successfully sent the message is  
30  
 
displayed through network.  
Note: The network determines whether this function is effective or not.  
3.1.9.9 Storage device  
You can select storage device in which the SMS can be stored in RUIM, phone,  
RUIM and phone.  
3.1.9.10 Send default message  
Allow you to select 'On' or 'Off' option. If you select 'On' option, the default  
message will be automatically sent to the caller's phone number when you  
ignore the incoming call.  
3.1.9.11 Default message  
By default its contents are 'I'm busy. Please call me after some time.' You can  
edit it.  
3.1.10 Memory status  
You can view the SMS memory status of the phone and RUIM card memory,  
including total memories and free memories.  
3.2 Call history  
Call register stores information about the last 30 calls (including missed,  
received, and dialled). Calls are marked with different icons indicating  
31  
 
missed/received/dialled calls.  
3.2.1 Missed calls  
With this function, you can view and erase no more than the last 30 missed calls  
you have received. You can also send a message to any missed call. See  
'Detailed call records'.  
3.2.2 Received calls  
With this function, you can view and erase no more than the last 30 incoming  
calls. You can also send a message to any received call. See 'Detailed call  
records'.  
3.2.3 Dialled calls  
With this function, you can view and erase no more than the last 30 dialled calls.  
You can also send a message to any dialled call. See 'Detailed call records'.  
Detailed call records as following:  
Details  
You can view the selected call record details:  
Missed call: To view when it was missed and the phone number who dialled it.  
Received call: To view when it was received, call duration and the phone  
number who dialled it.  
32  
 
Dialled call: To view when it was dialled, call duration and the phone number  
who received it.  
If the selected phone number cannot be stored in the contacts list, you can  
press to save it,otherwise just view it.  
Send message  
You can send message to the available number.  
call  
You can call the available number.  
Erase  
You can erase the selected call record.  
Erase all  
This function can be used to erase all the missed/received /dialled calls history.  
3.2.4 Erase history  
You can erase the all Call History with this menu.  
3.2.5 Call duration  
This function allows you to display the duration of your last call, total received  
call, total dialled call and life time, and also to reset your time counter to zero.  
3.2.5.1 Last call  
33  
 
Phone displays the time used by the last call since the counter was reset.  
3.2.5.2 Total received calls  
Phone displays the time used by received calls since the counter was reset.  
3.2.5.3 Total dialled calls  
Phone displays the time used by dialled calls since the counter was reset.  
3.2.5.4 Reset all  
You can reset the counter of the calls timer to zero.  
3.2.5.5 Life time  
Phone displays the total duration used by all calls and the total number of calls  
since the counter was reset.  
3.3 Profiles  
The profiles function provides a quick and convenient way to reset your mobile  
phone setting for a particular environment (e.g. to set your mobile for not ringing  
when you are in a meeting, or increasing the volume of the ring tone when  
outside). Each profile has a factory default, however you can adjust each profile  
to suit your requirements.  
How to activate a profile  
1. Press  
key to access the profile function.  
34  
 
2. Press up/down key to highlight the profile you wish to activate, then press  
key to enter.  
3. Press up/down key to highlight the 'Select profile' option, then press  
activate.  
key to  
Note: For short access to the profile mode press up navigation key in idle mode.  
When a profile is set, the icon which corresponds to the profile name is  
displayed on idle screen.  
How to customize a profile  
1.Press  
key to access the profile function.  
2.Press up/down key to highlight the profile you wish to customize, then press  
key to enter.  
3.Press up/down key to highlight the 'Edit profile' option, then press  
select.  
key to  
4.Press up/down key to highlight the setting you wish to customize, then press  
key to select.  
5.Edit the desired setting.  
For details about settings, see 'Edit profile'.  
6. After finishing it, press  
3.3.1 Vibrate only  
to save the modifications.  
35  
 
By pressing  
3.3.2 Silent  
Select profile: if you need a quiet environment, you can activate the silent option  
key, you can activate the vibrate only option of the profile.  
of the profile.  
Edit profile: According to the quiet environment, you can customize the profile  
mode.  
See 'Edit profile'.  
3.3.3 General  
Select profile: you can set the profile available as general.  
Edit profile: According to the ambience, you can customize the profile mode.  
See 'Edit profile'.  
3.3.4 Outdoor  
Select profile: if you are away from home, activate the available outdoor mode  
Edit profile: According to the outside environment, you can customize the profile  
mode.  
See 'Edit profile'.  
3.3.5 Meeting  
Select profile: if you are in a meeting, you can activate a meeting mode of the  
36  
 
profile.  
Edit profile: According to the meeting environment, you can customize the profile  
mode.  
See 'Edit profile'.  
The default setting is the vibrator mode.  
3.3.6 Headset  
Select profile: if you insert the headset, you can activate to the headset mode  
immediately.  
Edit profile: According to the ambience, you can customize the profile mode.  
See 'Edit profile'.  
Edit profile as following:  
Ring type  
The incoming call ringer types have: Ringer, Vibration, Vibr. then ring, Silence,  
Vibr and Ring and One beep.  
Ring Tone  
You can allocate the incoming call ringer from 15 tones for no group's number.  
The ringer of the group's number setting is available under the phonebook  
groups setting state.  
Ringer volume  
37  
 
Allow you to adjust the volume of the Ringer.  
Earpiece volume  
Allow you to adjust the volume of the earpiece.  
Key volume  
Allow you to adjust the volume of the key.  
Message alert  
The message alert types have: Vibrate, Silence, Two beeps, Four beeps and  
Ring.  
You can select different new SMS ringer formats. The phone provides 5 SMS  
Ringers.  
Alerts  
You can Change the status of alerts detailed below:  
Service change  
When the alert for Service Change is on, it means that every time your phone  
loses service, or changes from its carrier to a different carrier, an alert will be  
sounded.  
Minute beep  
When the alert for Minute beep is on, during a phone call, as your connection  
nears a minute, an alert will be sounded 10 seconds before every minute. This is  
38  
 
to help the user know how many minutes have gone by while they are talking (if  
conversation is short).  
Call connect alert  
When a call has successfully connected, an alert will sound.  
Call end  
When a call has successfully ended (either by you or because the call is  
dropped), an alert will sound.  
Fail on outgoing  
When alert for fail on outgoing is on, phone sounds an alert after failing on  
outgoing.  
Charger beep  
When the alert for Charge beep is on, every time your phone is connected or  
disconnected to the charger, an alert will sound.  
Auto answer  
A unique feature of the phone is the ability to answer an incoming call  
automatically after that time you set. Only headset mode has this feature.  
Selecting 'Off' shuts off the auto answer function  
Selecting 'After 5sec' will automatically answer the incoming call after 5sec.  
Selecting 'After 10sec' will automatically answer the incoming call after 10sec.  
39  
 
3.4 Settings  
Settings allow you to customize your phone as per your preferences.  
3.4.1 Display  
You can customize your display by creating a banner, adjusting the backlight,  
adjusting LCD contrast, selecting theme color, setting clock to show or hide,  
selecting the language, selecting the wallpaper, selecting the menu style.  
3.4.1.1 Banner  
You can set the greeting message which will appear in idle screen.  
15 characters can be stored as a greeting message.  
3.4.1.2 Backlight:  
You can specify the duration of the backlight.  
The phone provides 4 timers (7 Seconds, 15 Seconds, 30 Seconds and Always  
on) to allow you to select.  
3.4.1.3 Contrast  
You can adjust LCD contrast from 0 ~ 9 level.  
3.4.1.4 Theme colors  
Allow you to select display background light color.  
3.4.1.5 Clock  
40  
 
You can set the clock whether show on the idle screen or not.  
3.4.1.6 Language  
Allow you to set the displayed languages.  
3.4.1.7 Wallpaper  
Allow you to set the wallpaper displayed on idle screen.  
The phone provides 6 kinds of paper.  
3.4.1.8 Menu style  
You can select different style of the function.  
The phone provides 3 styles (Under water, Pane, Grid).  
3.4.2 Phone  
3.4.2.1 Keyguard  
This function allows you to lock the keypad when phone is not in use. You can  
also customize keypad lock time in minutes.  
3.4.2.2 Key tone  
Allow you to select the key tone mode: Normal (the prolonged sound and the  
brief sound are fixed.), Long (when you are pressing the key, the key tone is  
alerted until un-pressing).  
3.4.2.3 Version  
You can view the SW/HW/PRL version number by using this menu.  
41  
 
3.4.3 Security  
Security menu protects your phone from unauthorized use. Before accessing  
this option, you will be asked to enter lock code (The default is 000000).  
3.4.3.1 Lock mode  
This option is used to set the lock code.  
The lock code can be set to protect your phone from unauthorized use. It can be  
set to automatically lock your phone each time it is switched on or is in idle  
mode.  
The lock code is a six digit number which is set at 000000. This can be changed  
at any time by using the 'change lock code' option.  
Off  
This option can be used to set the lock code disable.  
Now  
This option can be used to immediately lock your phone. Once selected, your  
phone will be unusable until the phone lock code is entered.  
On power up  
This option can be used to automatically lock your phone each time it is  
switched on.  
3.4.3.2 Change lock code  
42  
 
This option is used to change the lock code.  
After selecting this option, you will be asked to enter new lock code to replace  
the old code. The new lock code must be entered again as confirmation.  
3.4.3.3 Reset  
Allow you to restore your phone to the factory settings.  
3.4.3.4 PIN Management  
This option is used to set and change the PIN code.  
The PIN code can be set to protect your RUIM card from unauthorized use. If  
set to Enable PIN, access to your RUIM card will be restricted each time the  
phone is powered on.  
Enable PIN  
If user enables the PIN, the Phone will ask for PIN each time it is switched on.  
By default the RUIM PIN is 1234.  
Disable PIN  
This option can be used to set the PIN disable.  
Change PIN  
This option is used to change the RUIM card PIN code.  
The ' PIN Management ' option must be set to Enable PIN and you must enter  
the old PIN code before you can proceed.  
43  
 
The phone will ask for enter a new 4~8 digits code to replace the old PIN code.  
The new PIN code must be entered again as confirmation.  
3.4.3.5 Call restriction  
With the Call restriction, you will be asked to enter password before accessing  
the particular restricted option (The default is 000000).  
This function includes the following options:  
Dialled  
If it is set to 'Yes', all outgoing calls except emergency calls will be prohibited.  
Received  
If it is set to 'Yes', all incoming calls will be restricted to answer.  
Phone book  
If it is set to 'Yes', before accessing the Names menu, you will be asked for  
entering password.  
Password setting  
Default password is 000000, but user can change it by using this feature.  
3.5 Call setup  
The function allows you to set related to calls.  
3.5.1 Call forward  
44  
 
Call forward is a network service.  
This service is used to forward incoming calls to your voice mail system or to  
another number depending on certain conditions in which your phone is  
unavailable or you don't want to receive any call.  
3.5.1.1 Unconditional  
This function will unconditionally forward all incoming calls to voice mail or other  
number.  
3.5.1.2 When busy  
This option will forward incoming calls when you are on a call.  
3.5.1.3 Not reply/Not reachable  
This function will forward incoming calls if you don't answer the call or your  
phone is out of network service or switched off.  
3.5.2 Call waiting  
If your mobile phone service provider supports this feature, the call waiting  
notifies you of an incoming call even while you are on a call. You can accept,  
reject, or ignore the incoming call.  
The Call Waiting function needs to be supported by your network service  
provider.  
45  
 
3.5.3 Any key answer  
If it is set to on, it allows you to answer an incoming call by briefly pressing any  
key except the Power key and Volume side key.  
3.5.4 Auto redial  
If it is set to on, it allows you to automatically redial the number if the first  
attempt was unsuccessful.  
3.5.5 Voice privacy  
Voice Privacy is a network service. If your wireless service provider supports this  
feature, the voice privacy feature protects the privacy of your current phone  
conversation from other callers placing phone calls on your same network. By  
default Voice Privacy is set on Standard Mode.  
3.5.6 International call prefix  
By using this function, you can set the local international dialling prefix code  
If you set the prefix code by hand, when dial a number with prefix code '+', '+'  
will automatically change into code you input.  
3.5.7 Show call time  
This function includes 'Hide' and 'Show' options. If it can be set to 'Show', the  
phone displays the duration of the current call.  
46  
 
3.6 Tools  
3.6.1 Scheduler  
You can use the scheduler function to set reminder/alerts for various events,  
meetings and more.  
The time entry is available in a 12-hour format only.  
3.6.1.1 Add new  
You can set date on the calendar. Inputting the information to the phone and  
then add alarm clock time.  
Note: If the alarm time can be set to past time, the phone displays 'Failed! The  
time should be later than now'.  
3.6.1.2 List all  
Allow you to View/Edit/Erase the entries list of schedule as per their time  
sequence.  
3.6.1.3 Erase all  
This function can be used to erase the whole entry lists.  
3.6.2 Alarm clock  
The alarm clock is based on the phone clock. It sounds an alert any time you  
want. This function supports three alarm clocks and a quick speed alarm clock.  
47  
 
3.6.2.1 Quick alarm  
The quick alarm clock can set different alarm times ‘After 10min’,‘After 30min’,  
‘After 1h’, ‘After 3h’, ‘Off’. The alarm can't be used when the mobile is power off.  
3.6.2.2 Snooze mode  
Off  
It can be set to turn off the alarm completely by pressing any key when the  
alarm wakes up.  
10 minutes/15 minutes/20 Minutes  
When the alarm goes off, select Snooze to postpone the alarm for 10/15/20  
minutes.  
3.6.3 Calculator  
The calculator function performs the 4 arithmetic calculations using up to 12  
digits, addition (+), subtraction (-), multiplication ( ), and division ( ).  
1.Press key to display the calculator main interface.  
2.Key operations for calculation are as follows:  
Enter the first number. Press number key to input the number, press key to  
key for a negative sign. Then select the  
input the decimal point and the  
operation by pressing one of the four direction keys. Input the second number  
after that.  
48  
 
To clear the entered number or operand, press key [Erase].  
To calculate the result, press key [Result] or press key [=].  
3.If you wish to start a new calculation, press  
4.If you close the calculator function, press  
key [Reset].  
key [Back].  
Note: For a limited degree of accuracy, this function should only be used for  
reference.  
3.6.4 Tip calculator  
This function allows you to quickly calculator the tip along with bill amount as  
well as an option to split the total bill.  
3.6.5 World clock  
User can view the timing of different cities in the world.  
Jakarta Time is save as default. Press up and down navigation key for viewing  
the timings of other cities.  
3.6.6 Stop watch  
After entering the stopwatch main interface, the phone displays the starting time  
00:00:0, press  
timing, press  
[Reset] to return to the stopwatch main interface.  
key [Start] to start timing. Here press  
key [Pause] to pause  
key  
key [Resume] again to continue timing, and that press  
49  
 
In the process of the timing, press  
lap.  
key [Split] every time you need to count a  
Press up/down navigation key to look over the former records.  
Note: For the limited degree of accuracy, this function should only be used for  
reference.  
3.6.7 Game  
3.6.7.1 Kong ming  
If you have saved the former game record, you can choose, start or resume  
game, or select game to start it again.  
Instructions  
Use up /2, down /8, left /4 and right /6 to control the cursor. Use 5 to select a  
chessman. When chessman X moves over chessman Y next to it, Y is erased  
from the chessboard. Only one chessman can be erased at one time. Player  
wins if there is only one chessman left in the center of the chessboard.  
3.7 Haier feature  
3.7.1 Menu Items Lock Code  
The user can protect important information in the mobile from use by others.  
It can be set to enter the Lock Code before opening the particular locked menu  
50  
 
phone. The default lock code is 000000, but user can change the password in  
security menu.  
The information includes Messages, Contacts, Call history, Alarm clock and  
Scheduler. Select any of the information and press  
the following options:  
key, allows you to access  
Enable  
Press  
key to validate making tick in checkbox. Press key again to cancel  
this operation, the checkbox becomes blank again.  
Enable All  
Press key to validate making tick in all checkbox.  
Disable All  
Press  
key to validate that all the tick in checkbox be canceled.  
3.7.2 Incoming Call Guard  
This function is used for screening incoming call. In simple words, your phone  
can restrict the callers after saving the mobile numbers in the lists explained  
below.  
3.7.2.1 Black List  
User can save 10 phone numbers in black list. The listed numbers cannot  
connect to user's phone number.  
51  
 
1.Press key to enter the black number list.  
2.Select any one of records and press  
key, the phone displays the following  
options:  
Edit  
Allow you to modify the black number or search from contacts to add. After that  
press key to select Ok option to confirm.  
Erase One  
Allow you to erase the selected black number.  
Erase All  
By using this function, you can erase all black numbers.  
3.7.2.2 White List  
User can save 10 phone numbers in white list. Only the listed numbers can  
connect to user's phone number. The detailed operation refers to 'Black List'  
menu.  
3.7.2.3 Setting  
With this menu user can activate the Black / White list phone numbers or cancel  
both of them. Those three things are not available in the same time; only one  
thing can be used in one time.  
Note: User needs to activate the Black/White list in the guard setting otherwise  
52  
 
the Incoming Call Guard will not work.  
3.8 My Menu  
3.8.1 WAP  
Your phone supports WAP 2.0. You can use this facility to connect to selected  
services on the mobile Internet.  
This menu option allows you to download a host of exciting content with WAP  
browser.  
Simply browse on the web page and download from  
a
wide selection of  
Ringtones, Wallpapers, and other applications such as BSE Stock Portfolio  
tracker, Faith and many more.  
For short access to WAP menu, you can directly press  
3.8.1.1 Homepage  
key in idle mode.  
telecom.co.id/’.  
3.8.1.2 History  
List of the previously visited sites.  
3.8.1.3 Bookmark  
List of the preset website.  
53  
 
New Bookmark  
You can write and save the new bookmark.  
New Folder  
You can create new folder to save bookmark.  
3.8.1.4 PHSH messages  
List of PUSH messages received.  
3.8.1.5 Advanced  
By pressing  
Open URL  
key, you can access the following options:  
You can input web page address of a site you want to visit and press 'OK' to  
connect.  
Page Folder  
You can create no more than 16 folders to save web page.  
Sound Folder  
List of sound you download from mobile Internet sites.  
(Support sound format: Mid)  
Image Folder  
List of image you download from mobile Internet sites.  
(Support image format: Jpeg, Bmp, Wbmp, Png)  
54  
 
Advanced Option  
You can customize these options in this menu.  
Clear Cookies  
Clear history record of browsed web pages.  
Set Background Music  
You can set the background music whether open or not while browsing web  
page.  
Setting  
You can change some settings in this menu.  
Set Gateway  
You can set gateway as per your preferences. 'Gateway 1' is the default and you  
can't edit. The default preferences are IP(10.17.27.250), port(8080),dial(#777),  
user name(wap), and password (wap).  
Select Gateway  
You can select one gateway as your demand.  
Restore Setting  
You can restore your phone to the default settings.  
Help  
Key Operation: Up/Down  
55  
 
Arrow: scroll display and switch focus;  
Left Arrow:go forward;  
Right Arrow: back;  
Select Key: OK;  
Left/Right Softkey: correspond to display;  
Send Key: interrupt the downloading;  
Keep Pressing * key: page up;  
Keep Pressing # key: page down;  
About  
Information of WAP you use.  
3.8.1.6 Exit Browser  
Stop the connection to the network and return to the upper menu.  
Note: For relevant charge standard and detailed setup, please consult local  
network service operator.  
3.8.2 SMS Service  
Only your RUIM card supports those kind of function, you can use it. Different  
RUIM cards are vary in menu name and content.  
3.9 Gallery  
56  
 
In this menu user can view downloaded images, music ring tones and available  
memory status for WAP etc.  
3.9.1 Picture  
You can download images from mobile Internet sites and manage them.  
3.9.2 Music  
The function allows you to download music from mobile Internet sites, and then  
to manage them.  
3.9.3 Other  
The user can download other information from mobile Internet sites.  
3.9.4 Memory status  
The function helps you to check the Used memory, Free memory and Total  
memory.  
3.9.5 Sort setting  
3.9.5.1 Sort by…  
You can sort the images, music and others downloaded from mobile Internet  
sites by name or size.  
By sorting them, you choose the order that you want the information to be  
displayed on the screen.  
57  
 
3.9.5.2 Ascend/Descend  
You can sort the information downloaded from mobile Internet by Ascend or  
Descend.  
3.10 Names  
You can store names and phone numbers in your phone or RUIM card memory.  
In idle mode, press  
to access the names function.  
58  
 
3.10.1 List  
You can use this function to search records, to dial directly, to execute erase,  
copy or send a message and to edit operations.  
Press  
key to enter the names list.  
If you need to browse phonebook's information, input the alignment characters,  
your mobile phone will then attempt to match the characters with the names in  
59  
 
your Phonebook.  
Once the number you prefer is displayed, you can press  
number.  
key to call this  
Select any record and press  
3.10.1.1 Details  
key to access the following functions:  
In a contacts list, you can view the following items:  
Items stored in the phone memory  
Name: Up to 14 characters  
Number: Up to 20 digits, 3 phone numbers  
Address: Up to 150 characters  
Email: Up to 64 characters  
URL: Up to 150 characters  
Note: Up to 250 characters  
Group: You can allocate the selected name to any group.  
Default: You can customize specific ring tones for incoming call from the name's  
numbers.  
Items stored in the RUIM Card  
Name: Up to 14 characters  
Number: Up to 20 digits  
60  
 
For details operations please refer to 'Details Submenus'.  
Details Submenus function as following:  
Send Message: Allow you to send the message to the selected number.  
Erase: You can erase the desired entries.  
Edit: You can edit the saved number, name and group.  
3.10.1.2 Find  
You can search a phone number from the phone book names. Please refer to  
'Find' menu.  
3.10.1.3 Erase  
You can erase selected record.  
3.10.1.4 Copy  
You can copy all RUIM card memory entries to phone memory, or copy all  
phone memory entries to RUIM card.  
3.10.1.5 Erase all  
You can erase all records.  
3.10.2 Add new  
With the Add new function, you can choose either the phone or RUIM card  
memory to store the new item.  
Phone memory capacity is 200 items. RUIM card memory depends on the  
61  
 
network service providers.  
If you add a new item to the phone memory, you need to enter one of the  
following: Phone Number, Address, Email, URL and Note, and you can select a  
group and ring tone for incoming call. If you add a new item to RUIM card, you  
need to enter: Phone Number .  
3.10.3 Find  
This function is used to search a phone number from the phone book names.  
You can search by name, number or group. If there are no entries in the phone  
book, the screen will display 'No record in phonebook!'. If there isn't any name  
matching your entry, the screen will display 'No match found!'  
3.10.3.1 Find name  
Input the name or the first character required to begin search.  
3.10.3.2 Find number  
Input the full number or several digits included by your number you want to  
search.  
3.10.3.3 Find group  
You can select the group you want to search.  
3.10.4 Multicopy  
62  
 
With the copy function, you can copy items stored in RUIM card memory to  
phone memory. and vice versa.  
3.10.4.1 All Copy  
Allow you to copy all of the RUIM card memory entries to phone memory and  
vice versa.  
3.10.4.2 Choice Copy  
You can selectively copy the record. You can select one or more of the entries  
key to view  
from the names list to copy it. After selecting an entry, press  
options as below:  
Select / Unselect  
Press key to validate making tick in checkbox. Press  
this operation, the checkbox becomes blank again.  
key again to cancel  
Cancel all  
Press  
key to validate that all the ticks in checkbox be canceled.  
Select all  
Press  
Copy  
key to validate making ticks in all checkbox.  
Press key and then the phone displays the confirmation, asking you if you  
wish to copy or not. Press key to confirm copy.  
63  
 
Note: :  
: The icon indicates that the names list has been selected.  
3.10.5 Groups  
Your mobile phone provides 9 groups in which 7 groups are by default other 2  
groups can be added. There are seven groups, including No group, Family,  
Friends, Colleagues, VIP, Business and Personal.  
You can allocate the phone memory and the RUIM card memory names to  
specific groups.  
By pressing key you may enter the following menus:  
3.10.5.1 View group  
Allow you to search the needed numbers or other information in the group,  
press  
Note: If there are no members in the group, press  
key to manage your groups after searching.  
key then the phone will  
key to enter  
display 'No members, add new member?'. At this time press  
the names list, you can add a record to the specific group.  
3.10.5.2 Set ring tone  
You can customize specific ring tones for Incoming Calls.  
The phone provides 15 ringers to allow you to select.  
3.10.5.3 Add group name  
64  
 
You can add two new group names to the phone.  
3.10.6 Erase all  
Before accessing this option, you will be asked to enter lock code (the default is  
000000). This feature allows complete erasing of all contacts either in RUIM  
card memory or Phone memory; the information thus deleted is unrecoverable.  
3.10.7 Speed dial  
Speed dial is a fast way to call one of your special numbers.  
Your mobile phone has 99 speed dial entries in which the first one are by default.  
Each speed dial entry can be edited by user.  
To dial Speed dial number  
Speed Dial Keys from 1 to 9 Press and Hold the number key , automatically  
it will dial the corresponding number.  
Speed Dial keys from 10 to 99 Type the numbers along with  
press key. (E.g. Speed dial 11th entry. Type 11# and press dial key.)  
key and  
Default Speed Dial Numbers are:  
1=Voice Mail (*777)  
3.10.8 Memory status  
This function helps you to check the number of entries stored in the names lists.  
65  
 
You can check the memory status of the RUIM card and phone memory,  
including free memories and total memories.  
4. Input method  
This mobile phone uses the eZi input Method. When using your mobile phone  
there will be many times that you will need to input text e.g. sending messages,  
entering names into the Phonebook, editing the greetings message, etc.  
Under the input mode, press key to switch the input mode.  
The phone provides the following methods:  
4.1 Number (123)  
This input method can be used to enter digits.  
1.In text editing mode, press  
top-right corner of the screen.  
2.Press the numeric keys to input numbers.  
key several times until '123' is displayed at the  
4.2 Character (Abc/abc/ABC)  
Using the character input method, you can enter uppercase and lowercase  
letters, and you can press and hold the numeric keys (2~9) to input numbers  
directly.  
66  
 
1.Tap the  
key several times until 'Abc' is displayed in the top-right corner of  
the screen, then you can type the first letter in uppercase. When you have typed  
the first letter, 'Abc' will be changed to 'abc' automatically.  
2.Tap the key several times until 'abc' is displayed in the top-right corner of  
the screen, then you can type in lowercase letters.  
3.Tap the  
key several times until 'ABC' is displayed in the top-right corner of  
the screen, then you can type in uppercase letters.  
4.Press desired number key, once to input a character, twice to display the  
second character, by analogy to finish the text.  
4.3 en/En  
1.The 'in' option allows you to type predictive text in Indonesian with all letters in  
lowercase.  
2.The 'In' option allows you to type predictive text in Indonesian with the first  
letter in uppercase.  
3.The 'en' option allows you to type predictive text in English with all letters in  
lowercase.  
4.The 'En' option allows you to type predictive text in English with the first letter  
in uppercase.  
67  
 
The following steps show how to write a text by using these input methods:  
1.In text-editing mode, tap  
right corner of the screen.  
key several times until 'En' is displayed at the top-  
2.Press each key once, even when the letter you required is not the first letter  
on the key. For example, to enter the word 'Mary', press 6,2,7,9 key.  
3.During inputting, you can press  
key.  
4.Press 0 key to add a space.  
key, then press the corresponding number  
4.4 Entering symbols  
1.Press the  
key to enter the special character library.  
2.Press up/down navigation key to select the symbol you need.  
3.Press the corresponding number key.  
5.USB windows device driver installation guide  
5.1 Introduction  
This document is a user guide for USB Windows device driver installation  
process. The USB Windows device driver provides the interface between the  
operating system and Haier D1200P handsets, allowing user applications to  
68  
 
communicate with devices. This installation guide is intended to provide a  
detailed description of the USB Windows device driver installation process.  
We will supply an accessory CD including this driver.  
5.2 Components  
Upon successful completion of the installation process, the following files will be  
located in the specified directories folders:  
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.inf:  
ViaUsbEts.inf  
ViaUsbHub.inf  
ViaUsbModem.inf  
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.sys:  
ViaUsbEts.sys  
ViaUsbModem.sys  
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.PDF:  
ctm_via_usb_drv_installation_user_guide_8_A.PDF  
5.3 Installation  
You must close all firewalls and anti-virus software before installing the USB  
driver.  
69  
 
1.To install the USB Windows device driver, you must first start the Setup  
application, ViaUsb_Setup.exe, by double-clicking the associated icon.  
Figure 1-USB Windows Device Driver Setup Icon  
2. The USB Windows Device Driver Setup Welcome dialog box will appear.  
Figure 2-USB Windows Device Driver Setup Welcome Dialog Box  
70  
 
3.Click the Next button to continue.  
The License Agreement dialog box appears.  
Figure 3-USB License Agreement Dialog Box  
4. To continue, you must accept the License Agreement by clicking the Yes  
button. If you select the No button, the following dialog box will appear,  
confirming whether you truly wish to terminate the installation process at this  
time.  
71  
 
Figure 4-USB Windows Device Driver Setup Process Termination  
Confirmation Dialog Box  
If you select the Yes button, the installation process is terminated. If you select  
the No button, the License Agreement dialog box (Figure 3) will reappear.  
Upon agreeing to the License Agreement (Figure 3), the Customer Information  
Request Dialog Box will appear.  
Figure 5-USB Setup Customer Information Request Dialog Box  
5.Please enter the appropriate user and company name into the corresponding  
fields. By clicking the Next button, you will proceed to the actual installation of  
the USB Windows Device Driver support files into their appropriate folders.  
72  
 
The USB Installation Status Message dialog box will then appear indicating what  
percentage of the file copying task is complete.  
Figure 6-USB Driver Installation Operation Status Message  
Upon completion of this step, the following message box appears.  
73  
 
Figure 7-USB Device- Discovery Action Request Message  
6. Click OK and connect the PC and the phone using the USB cable that we  
supplied. Then the following message box will only appear for a very short  
period of time, followed by the Window Hardware Installation Wizard's Device-  
Found Notification for the USB Hub, the USB ETS device, and the USB Modem  
device. The discovery, installation, and registration will complete automatically.  
Figure 8-Windows Device Manager's Device-Discovery Notification for the  
USB Hub/ETS/Moderm  
In the end, a prompt (Figure 9) will appear on the screen. The USB driver  
installation will then complete.  
74  
 
Figure 9-Windows Device Manager's Device Discovery Notification for the  
CBP USB Modem Device  
7. An examination of the Windows Device Manager's device list (as depicted in  
Figure 10) will evidence the successful installation of the USB devices, namely:  
VIA Telecom USB Hub Device  
VIA Telecom ETS Device  
VIA Telecom CBP USB Modem  
Figure 10-Windows Device Manger's Device List After Successful  
Installation of the VIA USB Devices  
Note:  
75  
 
This USB driver just supports windows 2000 and windows XP operating  
system.  
If the 'Digital Signature Not Found' dialog box (like Figure 11) appears,  
you need only click the Yes button.  
Figure 11-Windows Device Manager's Device-Discovery Notification that  
the CBP USB Modem Device- Driver Lacks WHQL Certification  
6. Modem installation guide  
You can dial-up to the network by considing the phone as modem after  
connecting the PC and the phone.  
76  
 
1. Connect the PC and the phone using the cable that we supplied.  
2. Add a new windows standard modem driver, i.e.  
Install process:  
Enter Control panel  
Enter Add/remove a hardware  
Enter add a new device  
Install a new modem  
Choose a modem driver  
77  
 
Recommend:  
Standard 56000 bps v90 modem for windows 2000  
Standard 33600 bps modem for windows XP  
3. Make a new dial-up connection  
Enter Network and Dial-up Connections  
Make new connection  
Click Next as follow  
4. Dial-up to the network  
78  
 
Dial-up directly for windows XP  
You will be asked to enter the user and password when log on for windows 2000.  
You can get the user and password from your mobile phone service provider.  
7. Frequently asked questions (FAQ)  
Here you will find answers to questions that you may have about your Haier  
D1200P mobile phone.  
Q. What is my Security Code?  
A. The Default Security code is 000000. However, it is suggested that you  
change this code immediately. Certain features can be used only after the  
correct security code has been successfully entered.  
Q. How do I change the Security Code?  
A. Settings Security  
Change lock code  
remember easily) Confirm Lock code Ok  
Enter Lock code (By Default lock code is 000000)  
Enter Lock code (enter any code which you are able to  
Q. What is the RUIM Lock?  
A. The RUIM lock code enables you to lock your RUIM card, thus preventing  
someone else from using it. The Default RUIM Lock is 1234, However, it is  
79  
 
suggested that you change this code immediately.  
Q. How to change the RUIM Lock?  
A. Settings Security Enter Lock code (By Default lock code is 000000) PIN  
Management Change PIN Enter old PIN (By Default PIN is 1234)  
new PIN Repeat new PIN Ok  
Q. How to enable RUIM Card Lock?  
Enter  
A. Settings Security Enter Lock code(By Default lock code is 000000) PIN  
Management Enable PIN Enter PIN (By Default PIN is 1234) Ok  
Q. How to disable the RUIM Lock?  
A. Settings Security Enter Lock code (By Default lock code is 000000) PIN  
Management Disable PIN Enter PIN (By Default PIN is 1234) Ok  
Q. How do I increase the volume of the phone ringer?  
A. Profiles select any mode Edit profile Ringer volume select High  
Q. How do I change the ringing tone?  
A. Profiles select any mode Edit profile Ring tone select any music Ok  
Q. How do I view the last dialled numbers?  
A. Press the call key to select the last dialled call.  
Q. How do I assign a key to speed dialling?  
A. Names Speed dial Options Set entry Select number from names lists  
80  
 
Ok  
Q. How do I reset my phone's call timer?  
A. Call History Call duration Reset all Ok  
Q. How do I find my phone's ESN (electronic serial number)?  
A. Turn off your phone. Remove the battery from the back of the phone. Your  
phone's ESN number is printed on the sticker that is pasted on the rear cover,  
and is labelled ‘ESN.’  
Q. How do I find out how much memory the phone has?  
A. Names Memory status Ok  
Q. How do I call my voice mailbox number (Retrieve voice messages)?  
A. When your phone alerts you to new voice messages, press and hold down  
the 1 key. Follow the phone instructions to listen to your voice mail.  
8.Trouble shooting  
If there are troubles when using your phone, please refer to the following table. If  
there are still questions, please dial Haier service telephone to solve.  
81  
 
82  
 
83  
 
84  
 
85  
 

Graco Inflatable Bouncy Toy EQ300C User Manual
Greenmaster Home Gym UB5 User Manual
Haier Microwave Oven EB 40100E User Manual
Hamilton Beach Coffeemaker 40912 User Manual
Hans Grohe Plumbing Product 06040000 User Manual
Hasbro Motorized Toy Car 73988 User Manual
Hayter Mowers Lawn Mower 335 001001 User Manual
Honeywell Air Cleaner HTT 022 User Manual
Hotpoint Oven SE1032X User Manual
IKEA Plumbing Product AA 233304 5 User Manual