QuickSpecs
Overview
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant BL e-C lass Server Blade Enclosure
(shown with 20 ProLiant BL10e server blades)
ProLiant BL10e G eneration 2 (G 2) Server Blade
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 1
QuickSpecs
Overview
HP ProLiant BL10e Generation 2 (G2) Server Blade
PLUS
or
or
a. C-GbE Interconnect Switch
b. RJ-45 Patch Panel
c. RJ-21 Patch Panel
Configuration Steps
For a complete configuration of the HP ProLiant BL e-Class system, do the following:
1. Select ProLiant BL10e G2 server blades sold [in a single-pack or 10-pack]
PLUS
2. Select Server Blade Enclosures (each can hold up to 20 ProLiant BL10e G2 server blades). The enclosure can be purchased bundled with 20 licenses
for ProLiant Essentials Rapid Deployment Pack at 50% of the standard license price.
(NOTE: Rapid Deployment Pack is optimized for configuring and deploying ProLiant BL10e G2 server blades and enable unique features such as
blade "rip and replace" for effortless server redeployment.)
PLUS
3. Select one of the three Interconnect Tray options for each server blade enclosure
(NOTE: Each interconnect tray includes an Integrated Administrator module.):
a. C-GbE Interconnect Switch (with 4 10/100/1000T Gigabit Ethernet
RJ-45 uplinks for up to 40-to-1 network cable reduction!)
O R
b. RJ-45 Patch Panel (with 40 RJ-45 connectors)
O R
c. RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
(NOTE: If suitable for your environment, select also the RJ-21 to RJ-45 Cable Option kit.)
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 3
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
HP ProLiant BL10e G2 Server Blade
Processor
One Ultra-Low Voltage Intel Pentium M 1GHz processor
Cache Memory
C hipset
1MB Level-2 on-die Cache
ServerWorks GC-SL chipset
NOTE: For more information regarding ServerWorks, please see the following URL:
Memory
Standard
512MB PC2100 Registered ECC DDR DIMM Memory standard (1x512 MB)
1024 MB (2 DIMM slots total)
Maximum
Network Controller
Internal Storage
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated
Hard Drive One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug hard drive
W arranty for the Server
Blade
1 year on parts, 9x5 NBD. HP Care Pack warranty upgrades available to add labor, on-site service, faster response times,
and longer terms to the standard server blade warranty.
Form Factor
Server blades plug vertically into HP ProLiant BL e-Class Server Blade Enclosure
Product Dem o
To view the Product Demo, please see the following URL, then click on "PRODUCT DEMO":
HP ProLiant BL10e G2 Server Blade Enclosure
D im ensions
5.25 inch Height (3U), 17.5 inch Width, 28.35 inch Depth
Bays for up to 20 ProLiant BL10e G2 server blades
Rack C apability
Mounts in HP, HP-branded, third-party, and Telco racks. Rack mounting hardware for HP, Compaq-branded and third-
party racks ships standard with each server blade enclosure. Telco rack-mounting hardware is a separately available option
kit.
Server Blade Enclosure
includes
Rear bay for 1 of 3 Interconnect Tray configurations for network cable management (see below).
Two (2) Diagnostic Adapters for connecting keyboard, video, mouse and other devices locally to individual server blades
ProLiant Essentials Foundation Pack for ProLiant BL Servers, includes the Insight Managerä 7 and Management Agents CD
and ProLiant Essentials Rapid Deployment Pack CD (trial version - 7-days, 10 nodes).
(NOTE: The ProLiant BL e-Class server blade enclosure can also be purchased bundled with 20 licenses for Rapid
Deployment Pack at 50% of the standard license price.)
Four (2+2 redundant) hot- plug fans
Dual (1+1 redundant) hot- plug power supplies (600 watts each), power cords
Server blade blanks (to fill 19 of the 20 server blade bays)
Rack mounting hardware for HP, Compaq-branded and third-party racks
Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector
HP Documentation CD
W arranty for Server Blade 3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times to the
Enclosure standard warranty.
HP ProLiant BL e-Class Interconnect Trays
NOTE: Each interconnect tray includes the Integrated Administrator module.
Please see the following (3) interconnect tray configurations for accessing server blade network connections:
ProLiant BL e-Class C-GbE Interconnect Switch (with 4 Gigabit Ethernet uplinks for up to 40-to-1 network cable reduction!)
NOTE: See details below.
RJ-45 Patch Panel (with 40 RJ-45 connectors)
RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
NOTE: See "Other Options" below for RJ-21 to RJ-45 Cable option kit.
W arranty
3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times to the
standard warranty.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 4
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
HP ProLiant BL e-Class Integrated Administrator ver. 1.40 Features
Out-of-band local console and remote network access to the server blade enclosure and all 20 server blades via
(one) RJ-45 10/100T Fast Ethernet and (one) RS-232 management connectors
Provides local and remote access to the ProLiant BL e-Class C-GbE Interconnect Switch command console and
browser-based management interfaces
SNMP, Web (via HTTPS) and command-line interfaces (via Console connector, Telnet and Secure Shell)
Remotely power on/off/reboot server blades and enclosures
Remotely toggle on/off unit identification LEDs (UID) of server blades and enclosures
Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and server blade
status
Connect to each server blade's serial text console for enabling full control over server blade's
Power-On Self Test (POST) and boot process, including the ROM-Based Setup Utility (RBSU).
NOTE: For ProLiant BL10e G2 server blades running Windows® 2000 Server, there is now available a Serial
Console for Windows utility that provides serial-based administrative functionality using the Integrated
Administrator remote console feature. For more information and to download the Serial Console for Windows
utility, go to the following page:
User administration for up to 25 users. Server blade bay privileges can be set on a per-user basis
Virtual NMI button generates non-maskable interrupt for crash debug and analysis
Support for Network Time Protocol (NTP)
IP Security feature limits access to user-specified IP addresses
AlertMail enables email alerts for system events
More than 100 scriptable commands enable automated management
Selective enabling of all protocols, such as Telnet
Logging of operating system console, server blade and enclosure hardware events, user actions and invalid login
attempts
Emergency server blade enclosure shutdown caused by a critical temperature
Enclosure Link (2) connectors reserved for future use.
CAUTIO N: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an
external device to these enclosure link (RJ-45) connecters may damage your external device.
For more information on the ProLiant BL e-Class Integrated Administrator, please visit the Web site at:
HP ProLiant BL e-Class C-GbE Interconnect Switch Features
Provides up to a 40-to-1 reduction in network cables for each server blade enclosure using a pair of non-blocking
layer 2 switch modules
Four RJ-45 10/100/1000T Gigabit Ethernet uplinks
Forty 10/100T Ethernet ports dedicated to server blade-to-interconnect switch network communications
Communicate with all 40 server blade network controllers through any one uplink connector and the management
connector
Spanning tree protocol for loop-free path redundancy
Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management
Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector
Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts
256 Port-based IEEE 802.1Q tagged VLANs per switch processor module
IGMP (internet group management protocol) snooping and quality of service (QoS) packet prioritization
TFTP server support for rapid deployment of multiple interconnect switches and to provide backup and restore
capabilities
Industry-standard design compatible with industry-standard network components from leading network
manufacturers
Fully pre-configured for rapid deployment and immediate operation in ProLiant BL e-Class enclosure
For more information on the ProLiant BL e-Class C-GbE Interconnect Switch, please visit the Web site at:
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 5
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
Other Options
RJ-21 to RJ-45 Cable option kit; contains four (4) 10 foot RJ-21 to RJ-45 cables (for use with the RJ-21 Patch Panel)
interconnect tray
Diagnostic Adapter Interfaces
NOTE: Two Diagnostic Adapters are included with every ProLiant BL10e G2 Server Blade Enclosure.
ProLiant BL10e G2 server blade LEDs and buttons
PS/2 Mouse
PS/2 Keyboard
Video
Serial
USB (2)
NOTE: Please see the following URL for additional information regarding USB support:
NOTE: This Web site is available in English only.
NOTE: Server blades also support USB keyboard and USB mouse attached via the Diagnostic Adapter. The following USB
devices have been tested for use with the ProLiant BL10e and the Diagnostic Adapter:
USB Easy Access Keyboard (Carbon) (PN 267146-xx8)
USB Easy Access Keyboard (Carbonite) (PN DC168B#)
USB 2-Button Scroll Mouse (Carbon) (PN 195255-B25)
USB 2-Button Scroll Mouse (Carbonite) (PN DC172B)
USB Floppy (PN 304707-B21)
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 6
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant Essentials
Foundation Pack
Software for the ProLiant
ProLiant Essentials Rapid
Deployment Pack
Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for
all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Integration
Module featuring ProLiant server pre-configured events for OS installation, and optimized
software drivers, firmware and management agents. Every RDP CD includes 10-node trial
licenses for evaluation purposes. RDP requires a license for each server deployed and are
available for purchase with blade servers. For more information, visit
BL Server
HP Systems Insight Manger
HP Systems Insight Manager (HP SIM) help maximize system uptime and performance and
reduce system maintenance costs by providing proactive notification of problems before
those problems result in unplanned downtime or reduced productivity. HP SIM is easy to set
up to work with the Insight Management Agents, integrated Light-Out and Remote Insight
Light-Out Edition, and Version Control Agents to deliver robust fault, configuration, and
asset management as well as remote administration. With HP Systems Insight Manager
customers will also be able to take advantage of role-based security; the ability to manage
ProLiant, Integrity, and HP9000 systems; and plug-ins for storage, client, printer, and
power management as well as server rapid deployment, performance management, and
workload management. For more details on HP Systems Insight Manager visit
Management Agents
The Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into HP servers,
workstations, desktops, and portables, and send alerts to HP Systems Insight Manager and
other enterprise management applications in case of subsystem or environmental failures.
For additional information about the Management Agents and other management
products from HP, please visit the management Web site at
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email
subscription service that provides software and driver change notifications for ProLiant
products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a
weekly or monthly basis.
ROMPaq, support software,
and
configuration utilities
The latest software, drivers, and firmware fully optimized and tested for your ProLiant server
and options, available in the RDP CD, SmartStart or downloadable from Software and
Drivers download pages, linked from the SmartStart website at
Survey Utility and diagnostics The most advanced configuration analysis, reporting and troubleshooting utilities used by
utilities HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
O ptional ProLiant
Essentials Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business
problems and needs:
Workload Management Pack - provides easier management of complex environments, improving overall server
utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on
a single multiprocessor ProLiant Server.
Performance Management Pack - a performance management solution that identifies and explains hardware
performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable
resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken networking linkages and steers
traffic to the optimum route based on network conditions.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 7
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
Sm artStart
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server
configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using the I/O
port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is
included with your Blade server or order your copy from the SmartStart web site. For more information, please visit the
SmartStart version supported (minimum): SmartStart 6.20
Industry Standard
Com pliance
ACPI 1.0b compliant
SDG 3.0 compliant
Microsoft Logo certifications
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757)
groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643) (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray
option)
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.3ac and 802.1Q, IEEE 802.1Q, and IEEE
802.3x (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 (ProLiant BL e-Class C-GbE Interconnect Switch
interconnect tray option)
Intelligent M anageability Insight Manager 7
HP Systems Insight Manager
ROM Based Setup Utility (RBSU)
Automatic Server Recovery (ASR-2)
Enclosure Self Recovery (ESR)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Blade and Enclosure Health Logs
Redundant Power Supply Utility
Power Down Utility
Pre-Failure Warranty (covers processors, hard drives and memory)
HP Interconnect Switch Management System and Utilities (included with the ProLiant BL e-Class C-GbE Interconnect
Switch interconnect tray option)
A va ila b ility
Redundant Hot-Plug Power Supplies (ProLiant BL e-Class Server Blade Enclosure)
Redundant Hot-Plug Fans (ProLiant BL e-Class Server Blade Enclosure)
ECC Memory (ProLiant BL10e Server Blade)
Redundant ROM (ProLiant BL10e Server Blade)
Support for ProLiant network adapter teaming
Dual network communication paths to each server blade using redundant, non-blocking layer 2 switch modules
Redundant inter-module communication links
Two redundant uplink ports per each interconnect switch module
IEEE 801.1D Spanning tree protocol for loop-free path redundancy
Redundant configurable community strings and SNMP trap manager hosts
IEEE 802.3ad automatic multi-link load balancing and link failover (excluding LACP)
Security
Power-on password
Administrator's password
Secure Shell (SSH) access through the Integrated Administrator serial console
ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option security
Multilevel user names and passwords with configurable time out period setting
Ability to disable web-based and Telnet access to the switch user interfaces
256 IEEE 802.1Q tagged VLANs per interconnect switch module
Unicast and multicast static MAC address packet filtering table (layer 2 access control list)
Ability to specify the IP based management stations that are allowed to access each switch
Restriction on the maximum number of MAC addresses learned on a per port basis
Secure shell (SSH) access to the switch command line and menu driven interfaces via the Integrated Administrator
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 8
QuickSpecs
Standard Features
HP ProLiant BL10e Generation 2 (G2) Server Blade
O S Support
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit OS Support Matrix at:
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at
Rack Airflow Requirem ents Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted
servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded
with servers using the latest processors.
CAUTIO N: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to
prevent damage to the equipment
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830
square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required
64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7
cm (2.75 inches)
CAUTIO N: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: Please consult the Setup & Installation Guide for the server for additional details.
Service and Support
Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory
and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In
addition 90-day's getting started software telephone support may be covered under the warranty or available for an
additional fee. Enhancements to warranty services are available through HP Care Pack services.
NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support.
Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business
requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window
with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT
solutions helping to deliver high level of application availability. Response times range from 30 mins for critical
problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade enclosure that the
server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our
worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at:
NOTE: Additional information regarding worldwide limited warranty and technical support is available at:
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 9
QuickSpecs
Models
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant BL10e G 2
P1G Hz-1M B (ULV), 512-
MB, 40-GB ATA
333773-B21 (1 pack)
333774-B21 (10 pack)
Processor
One Ultra-Low Voltage Intel Pentium M 1GHz processor
1-MB Level-2 on-die cache
Cache Memory
Memory
512 MB (Standard) to 1024 MB (Maximum) PC2100 Registered ECC DDR DIMM Memory
standard (1x512 MB)
Network Controller
Hard Drive
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated
One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug 2.5" hard drive
Plugs vertically into HP ProLiant BL10e G2 Server Blade Enclosure
Form Factor
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 10
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant BLe-C lass
U nique O ptions
Four (4) RJ-21 to RJ-45 cables for use with the RJ-21 Patch Panel interconnect tray
(10 foot cables)
257076-B21
293119-B21
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
Server Blade Enclosure
ProLiant BL e-Class Server Blade Enclosure
243280-B21
273644-B21
ProLiant BL e-Class Server Blade Enclosure (includes 20 licenses for ProLiant Essentials Rapid
Deployment Pack at 50% of the standard per-node license list price)
Interconnect Trays (each
includes an Integrated
Adm inistrator m odule)
Interconnect Tray, ProLiant BL e-Class C-GbE Interconnect Switch
Interconnect Tray, RJ-21 Patch Panel
243283-B21
253177-B21
243282-B21
Interconnect Tray, RJ-45 Patch Panel
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 11
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant Essentials
Value Pack Software
ProLiant Essentials Rapid Deployment Pack (1 node license, V1.1)
NOTE: Each server blade bay slot populated by a server blade requires one license.
267196-B21
ProLiant Essentials Rapid Deployment Pack (10 node license, V1.1)
NOTE: Rapid Deployment pack is now available in Linux only environments.
269817-B21
302127-B21
Flexible-Quantity License Kit
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses
with a single activation key. The quantity ordered of this part number will be the quantity of licenses
included in the kit in the form of a corresponding activation key. Use the same key to activate all
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation
key, and documentation
AKA Tracking License
302128-B21
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this part
number entitles the customer to deploy additional licenses of the product under the terms of the
existing Activation Key Agreement. Nothing is delivered in conjunction with the purchase of this part
more information on Activation Key Agreements.
ProLiant Essentials Workload Management Pack
(Featuring Resource Partitioning Manager version 2.0)
303284-B21
374055-B21
ProLiant Essentials Performance Management Pack, 10-Server License
NOTE: For use with 10 servers. Contains 10 licenses with one unique license
activation key and documentation.
ProLiant Essentials Performance Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
306696-B21
306697-B21
ProLiant Essentials Performance Management Pack, Flexible-Quantity License
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses
with a single activation key. The quantity ordered of this part number will be the quantity of licenses
included in the kit in the form of a corresponding activation key. Use the same key to activate all
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation
key, and documentation
ProLiant Essentials Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique license activation key and
documentation.
372906-B21
372950-B21
ProLiant Essentials Intelligent Networking Pack, Flexible License
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses
with a single activation key. The quantity ordered for this part number will be the quantity of licenses
included in the kit in the form of a corresponding activation key. Use the same key to activate all
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation
key, and documentation.
ProLiant Essentials Intelligent Networking Pack, Tracking License
372951-B21
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this part
number entitles the customer to deploy additional licenses of the product under the terms of the
existing Activation Key Agreement.
NOTE: Nothing is delivered in conjunction with the purchase of this part number. Visit
for more information on Activation Key Agreements.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
Memory
(SDRAM DIMMs)
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
287494-B21
287495-B21
287496-B21
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 12
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
UPS and PDU Power Cord Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU
M atrix
units:
U ninterruptible Power
System s- Rack
HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage (NA)
HP UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Int'l)
HP UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan)
HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA)
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA)
HP UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan)
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Japan)
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Int'l – detachable cord)
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)
204404-001
204404-B31
204404-291
192186-001
192186-002
192186-291
192186-292
192186-B31
192186-B32
192186-B33
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage
(16A CEE 7/7 SCHUKO Plug)
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)
192186-AR1
347207-001
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (NA)
NOTE: The UPS R6000 has a hardwired input.
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Int'l)
NOTE: The UPS R6000 has a hardwired input.
347207-B31
347207-291
207552-B22
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Japan)
NOTE: The UPS R6000 has a hardwired input.
UPS R12000 XR N+ x (200-240V) (WW-hardwired)
NOTE: The UPS R12000 XR has a hardwired input and output.
UPS O ptions
SNMP Serial Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
192189-B21
192185-B21
218971-B21
192188-B21
347224-B21
217800-B21
325361-001
325361-B21
347225-B21
Six Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
Extended Runtime Module, R1500 XR
NOTE: 2U each, two ERM maximum.
Extended Runtime Module, R3000 XR
NOTE: 2U each, one ERM maximum.
Extended Runtime Module, R6000
NOTE: 3U each, two ERM maximum.
Extended Runtime Module, R12000 XR, 4U
NOTE: 4U each, two ERM maximum.
R12000 XR BackPlate Receptacle Kit, (2) L6-30R (NA)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
R12000 XR BackPlate Receptacle Kit, (2) IEC-309R (WW)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
SNMP-EN Adapter
NOTE: Supports R6000 UPS series only.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 13
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
M odular PDUs 1U/0U
(U p to 32 outlets)
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
(NA, Japan)
252663-D71
NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS
R3000 XR.
NOTE: 1U/0U mounting
brackets shipped with the unit
(optimized for 10000 and 9000
series racks).
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
(NA, Japan)
252663-D72
HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
252663-B31
252663-B21
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW)
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW)
NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific
power requirements (country-specific cord needs to be ordered separately; for North America, need IEC
C19 to L6-20P power cord PN: 340653-001). This model may also be used with the high volt UPSs
R3000 XR and R6000.
252663-B24
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs)
QuickSpecs for additional options including shorter jumper cables and country specific power cords:
(North America)
(Worldwide)
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 14
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
USB O ptions
USB Easy Access Keyboard (carbon)
USB Easy Access Keyboard (Carbon) Country Key Code
267146-xx8
Dash #
-008
-038
-048
-058
-068
-078
-088
-098
-108
-128
-138
-148
-158
D escription
US
Dash #
-178
-188
-218
-228
-238
-248
-258
-298
-338
-358
-B38
-B48
D escription
Arabic
Belgium
Hungary
Czech
UK
Germany
France
Italy
Slovac
Polish
Spain
Denmark
Norway
Russian
Japan
Sweden/Finland
French Canadian
Portugal
Turkey
Dutch
Finish
Int'l
BHCSY
Greek
USB Easy Access Keyboard (carbonite)
USB Easy Access Keyboard (carbonite) Country Key Code
DC168B#
Dash #
A2M
AB0
AB1
AB2
AB6
AB7
AB8
AB9
ABA
ABB
ABC
ABD
ABE
ABF
ABH
ABJ
D escription
ICELAND
TAWA
KOR
PRC
Dash #
ABT
D escription
HE
ABU
ABV
ABX
UK
ARA
FIN
FR A
GRK
ABY
ABZ
AC0
AC4
ACB
AKB
AKC
AKD
AKL
DEN
ITL
TURK
PORT
US
BEL
BRZ
RUSS
CZE
EURO
FCAN
GR
HUNG
POL
SP
THAI
BHCSY
SLOV
ICELAND
KAZ
FR
AKN
AKR
ARK
B15
NL
Japan
LA
ABM
ABN
ABS
NOR
SW
UUZ
SWISS
USB 2-Button Scroll Mouse (carbon)
USB 2-Button Scroll Mouse (carbonite)
USB Floppy
195255-B25
DC172B
304707-B21
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 15
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
HP StorageW orks ESL9000 Series Tape Libraries
ESL9595 Extended Tape Library, 0 drive, 400 slots (card cage, Interface Mgr card, Command View
Tape Libraries
343378-B21
license)
ESL9595 Library, 0 drive, 400 slots
330833-B21
343377-B21
ESL9322 Extended Tape Library, 0 drive, 222 slots (card cage, Interface Mgr card, Command View
license)
ESL9595 Library, 0 drive, 222 slots
330832-B21
330834-B21
301930-B21
293414-B21
330842-B21
330842-B22
330842-B23
330840-B21
330839-B21
343375-B21
343376-B21
ESL9000 Ultrium 460 drive kit
ESL9000 Ultrium 230 drive kit
ESL9000 SDLT 320 drive kit
ESL9000 400 to 500 slot upgrade
ESL9000 500 to 595 slot upgrade
ESL9000 400 to 595 slot upgrade
ESL9000 222 to 322 slot upgrade
ESL9000 E2400-160 FC Interface Controller (one controller for every four drives)
License for Direct Backup Engine ESL
License for Secure Manager ESL
NOTE: Please reference the ESL9000 Series Tape Libraries QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete solution;
reference current compatibility information at http://www.hp.com/go/ebs
C ustom Builder
Please see the Enterprise Configurator for configuration assistance at: http://www.hp.com/products/configurator.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 16
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
S10614 (14U) Rack Cabinet - Shock Pallet
HP Rack 10647 (47U) – Pallet
292302-B22
245160-B21
245160-B23
245161-B21
245161-B22
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
HP Rack 10000 Series
(Graphite Metallic)
HP Rack 10647 (47U) – Crated
HP Rack 10642 (42U) – Pallet
HP Rack 10642 (42U) – Shock Pallet
HP Rack 10642 (42U) – Crated
HP Rack 10636 (36U) – Pallet
HP Rack 10636 (36U) – Shock Pallet
HP Rack 10636 (36U) – Crated
HP Rack 10622 (22U) – Pallet
HP Rack 10622 (22U) – Shock Pallet
HP Rack 10622 (22U) – Crated
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
(Worldwide)
(North America)
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
Rack O ptions for H P
Rack 10000 Series
HP Light kit for 10000 series rack
361589-B21
251960-B21
255488-B21
HP Plinth kit for 10000 series rack
800mm Wide Stabilizer Kit (Graphite)
NOTE: Supported by the Rack 10842 cabinet only.
600mm Stabilizer Kit – Graphite
246107-B21
248929-B21
246099-B21
257413-B21
Baying Kit for Rack 10000 series (Carbon)
42U Side Panel – Graphite Metallic
110V Fan Kit (Graphite)
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.
220V Fan Kit (Graphite)
257414-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.
36U Side Panel – Graphite Metallic
246102-B21
255486-B21
248931-B21
47U Side Panel – Graphite Metallic
9000/10000 Series Offset Baying Kit (42U)
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together.
Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of
the two racks.
NOTE: For additional information regarding Rack Options, please see the following URL:
Ballast Option Kit
120672-B21
248931-B21
9000/10000 Series Offset Baying Kit (42U)
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together.
Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of
the two racks.
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 17
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
Rack Rail Adapter Kit (25" depth)
120675-B21
234672-B21
253449-B21
332558-B21
168233-B21
400336-001
400336-B31
400336-291
262585-B21
262586-B21
110936-B21
110936-B24
110936-B25
263474-B21
263474-B22
263474-B23
263474-B24
263474-B25
144007-B33
221546-xx1
348373-B21
100 kg Sliding Shelf
Monitor/Utility Shelf - Graphite
Depth Adjustable Fixed Rail
Cable Management D-Rings Kit
Server Console Switch 1 x 4 port (100-230 VAC)
Server Console Switch 1 x 4 port (100-230 VAC) (Int’l)
Server Console Switch 1 x 4 port (100-230 VAC) (Japan)
IP Console Switch Box, 1 x 1 x 16
IP Console Switch Box, 3 x 1 x 16
CPU to Server Console Cable, 12’
CPU to Server Console Cable, 3’
CPU to Server Console Cable, 7’
IP CAT5 Cable 3’, 4 pack
IP CAT5 Cable 6’, 8 pack
IP CAT5 Cable 12’, 8 pack
IP CAT5 Cable 20’, 4 pack
IP CAT5 Cable 40’, 1 pack
Switch Box Connector Kit (high voltage) (Int'l)
TFT5600 Rack Keyboard Monitor
TFT7210R Rack Mounted 17" Monitor
NOTE: For a complete list of Monitors please view the following URL:
1U Rack Keyboard & Drawer (Carbon)
257054-xx1
C ountry C ode Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1))
XX = 001
XX = 031
XX = 041
XX = 051
XX = 061
XX = 071
XX = 081
US
XX = 091
XX = 101
XX = 111
XX = 131
XX = 181
XX = 291
XX = B31
Norway
UK
Sweden/Finland
Switzerland
Portugal
Germany
France
Italy
Belgium
Spain
Denmark
Japan
International
NOTE: For additional information regarding Rack Options, please see the following URL:
Rack O ptions for H P,
Com paq-branded, Third
Party and Telco racks
Telco rack-mounting hardware kit for ProLiant BL e-Class Server Blade Enclosure
266076-B21
293119-B21
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 18
QuickSpecs
Options
HP ProLiant BL10e Generation 2 (G2) Server Blade
Service and Support
O fferings (HP Care Pack
Services)
NOTE: The HP Care Pack services for ProLiant BL e-Class server blades cover the server blade and
the e-Class blade enclosure that the server blade is installed in as well as the interconnect tray.
Hardware Services O n-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years , Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Installation & Start-up Services
UA220A
UA220E
UA221A
UA221E
UA222A
UA222E
ProLiant BL e-Class Blade Server Hardware Installation
UA227A
UA227E
U4960A
U4960E
U5683A
ProLiant BL e-Class Blade Server Hardware Installation, Electronic
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation, Electronic
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server. This
new server will be deployed using either one of the pre-configured scripts or an image. In addition,
the service will provide for the capture and storage of the configuration of the newly deployed server
and orientation on product usage. To be delivered during standard office ours, standard office days.
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server. This
new server will be deployed using either one of the pre-configured scripts or an image. In addition,
the service will provide for the capture and storage of the configuration of the newly deployed server
and orientation on product usage. To be delivered during standard office ours, standard office days.
Electronic.
U5683E
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 19
QuickSpecs
Memory
HP ProLiant BL10e Generation 2 (G2) Server Blade
ProLiant BL10e G 2 Server Blade
STANDARD MEMORY
512-MB PC2100 Registered ECC DDR DIMM Memory installed (1 x 512-MB SDRAM DIMM)
STANDARD M EM O RY PLUS O PTIO NAL M EM O RY
Up to 1024 MB PC2100 Registered ECC DDR DIMM Memory is available with the installation of optional SDRAM DIMM memory expansion kits.
Memory
Slot
1
2
Standard
O ptional
O ptional
M aximum
512 MB
640 MB
768 MB
1024 MB
512 MB
512 MB
512 MB
512 MB
Em pty
128 MB
256 MB
512 MB
Following are memory options available from HP:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
287494-B21
287495-B21
287496-B21
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 20
QuickSpecs
Technical Specifications
HP ProLiant BL10e Generation 2 (G2) Server Blade
HP ProLiant BL10e G 2
Server Blade Enclosure
D im ensions
Height
5.25 in (13.35 cm) (3U)
17.5 in (44.45 cm)
28.35 in (72.01 cm)
4.5 lb (2.04 kg)
Width
Depth
W eight
Interconnect Tray
20 server blades
35 lb (15.86 kg)
Enclosure with 2 power supplies 54.5 lb (24.7 kg)
Total weight fully loaded 94 lb (41.73 kg)
Power Supply
600W , Hot-Plug
Redundant
Two Redundant Power Supplies (optimized to provide full redundancy at 120 and 220
volts)
(2 standard)
Input Specifications
Normal Line Voltage
Range Input Line
Frequency Range
Power Factor
100 to 127VAC, 200 to 240VAC
90 to 264VAC
43 to 63Hz
> 0.95 (120Vac/Max Load)
Input Current
8.5A @ 120VAC, 4.3A @ 240VAC
Inrush Current
25A
Holdup Time
25mS
600W
G eneral Specifications
Full Output Rating
Minimum Load
Input to Output
Input to Ground
D ielectric Voltage
W ithstand
1500Vac or 2150Vdc (1 Min.)
1500Vac or 2150Vdc (1 Min.)
2200V
Input Transient
Susceptibility
Common and Differential
Mode (superimposed on AC
line)
Differential Mode
1100V
NOTES: ProLiant BL e-Class Power Calculator is available from the product page at the following address:
Click "Power Calculator" in the "Support" section.
N on-H ot Plug U ltra
ATA/100 Hard Drives
40 GB 5.4 K
C apacity
H eight
40,007 MB
0.374 in (9.5 mm)
2.756 in (70 mm)
Ultra ATA-5 (IDE) 100 MB/s
W idth
Interface
Transfer Rate Synchronous 27.8 to 44.1 MB/sec (Disk-Buffer)
(Maximum)
Seek Time
Single Track
13 ms
(typical reads, including
settling)
Rotational Speed
Bytes/Sector
5,400 RPM
512
Physical C onfiguration
Logical Blocks
78,140,160 (LBA)
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 21
QuickSpecs
Technical Specifications
HP ProLiant BL10e Generation 2 (G2) Server Blade
Two NC3163 Fast
Network Interface
10Base-T/100Base-TX
Ethernet NIC Em bedded
10/100 WOL (Wake on LAN)
C om patibility
IEEE 802.3/802.3u compliant
32-bit bus-master PCI
Data Transfer M ethod
Network Transfer Rate
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
100Base-TX (Full-Duplex)
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
Connector
Mates into enclosure center wall assembly
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
100Base-TX
H P ProLiant BL
e-Class C-G bE
Interconnect Switch
General
Two 24-port Managed Layer 2 Ethernet switches for server network cable reduction
Fully pre-configured for immediate operation
Performance
4.0 Gbps Switching bandwidth
12 Million pps aggregate throughput (64-byte packets)
Full-wire speed for all connections
Forwarding M ode
MAC Addresses
Memory
Store and forward
16,382; MAC address based filtering and MAC address packet priority configuring
64MB Main
12MB Flash
32MB Packet Buffer
Ports
Four RJ-45 10/100/1000 T/TX/T Gigabit Ethernet uplink ports for customer use
Forty 10/100 T/TX fast Ethernet downlink ports dedicated to server blade to interconnect
switch network connections
Two 10/100 T/TX Fast Ethernet ports dedicated to inter-switch module communications
One RS-232 DB-9 port (console connector for Integrated Administrator)
One 10/100 T/TX Fast Ethernet port (Network management connector for Integrated
Administrator)
Auto-negotiation and auto-sensing with full-duplex
Management
Web-based interface with graphical user interface
Console menu driven Interface via local RS-232 and Telnet
Scriptable command line interface (CLI)
SNMP v1 (RFC 1157) with scripting tool and example scripts
RMON v1 (RFC 1757) groups 1, 2, 3, and 9
Telnet (RFC 854)
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC
2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, Ethernet MIB (RFC1643) and HP-
specific switch MIBs
64 Port-based IEEE 802.1Q tagged VLANs per switch module
XML human read/write configuration file
TFTP client (RFC 783) for backup and remote download of configuration and history log
files
IGMP (Internet Group Management Protocol) multicasting
EtherChannel (Fast EtherChannel, GigaChannel) compatible trunking
Uplink port speed and link activity LEDs
Simple network time protocol (SNTP)
Broadcast, multicast, and DA-unknown packet storm control
BootP and DHCP client support
BootP and DHCP client support
Port mirroring
IEEE Standards
Com pliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Quality of Service (QoS) Packet Prioritization
IEEE 802.3ac and 802.1Q Port Based Tagged VLANs and VLAN Extensions
DA - 11686 Worldwide — Version 13 — October 8, 2004
Page 22
QuickSpecs
Technical Specifications
HP ProLiant BL10e Generation 2 (G2) Server Blade
IEEE 802.1Q Trunking Encapsulation
IEEE 802.3x Flow Control
Form Factor
Removable interconnect tray that plugs into the rear of the server blade enclosure
Network Transfer Rate
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
100Base-TX (Full-Duplex)
1000Base-T (Full-Duplex)
1000Base-T (Full-Duplex)
10Base-T
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
2000 Mb/s
2000 Mb/s
Cable Support
Categories 3, 4 or 5 UTP;up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
100Base-TX
1000Base-T
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 11686
Worldwide — Version 13 — October 8, 2004
Page 23
|