HANNspree Graphics Tablet SN1AT75HSG1310 User Manual

SN1AT75(HSG1310)  
 
Control information  
This device is in accordance with the requirements in Radio & Telecommunications Terminal Equipment Directive  
1995/5/EC.  
This device complies with the requirements in EMC Electromagnetic Compatibility Directive 2004/108/EC and Low Voltage  
Directive 2006/95/EC.  
The highest CE SAR value for the device is 1.81 W/Kg.  
Recycling information  
Hannspree attaches great importance to our environmental policy, and firmly believe that we can better protect the "health"  
of the earth by properly disposing and recycling the industrial technological equipment that has reached service life.  
These devices contain recyclable materials, which can be re-added to new material after decomposition. In contract, other  
materials are classified as dangerous and toxic substances. We sincerely hope that you contact the relevant institutions  
based on the information we provide to recycle this product.  
For more information, please visit:  
2
 
Preventing Hearing Loss  
Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of  
time.  
This device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable  
EN 50332-1 and/or EN 50332-2 standards.  
3
 
Precautions  
For the correct use and good performance of the device, the user must fully understand the manual as well as strictly  
follow the instructions provided.  
Please avoid high temperatures (over 35°C) or low temperatures (below 0°C).  
Never knock the main machine violently.  
Never let the device come in contact with chemicals such as benzene, thinner etc.  
Do not let the device get close to strong magnetic field, electric field etc.  
Keep away from direct sunlight or heating appliances.  
Never privately dissemble, repair or modify the device.  
Using the device and the earpiece during bicycling, car and motorcycle driving is likely to cause danger.  
Never use higher volume, which may damage your hearing ability.  
Please charge under the following circumstances:  
A. The battery icon shows no power ( ) on the upper-right corner of the screen.  
B. The system automatically shuts down, and immediately shuts down after a re-start.  
C. The operating button does not respond.  
D. The product displays the red icon ( ) on the upper-right corner of the screen.  
DO NOT throw the battery in municipal waste.  
The crossed out wheeled bin symbol indicates that  
the battery should NOT be placed in municipal  
waste.  
HANNspree Europe Holdings BV: Marco Poloweg 6  
5928 LE Venlo The Netherlands  
HANNspree UK Ltd: Ground Floor, Suite F, Breakspear Park, Breakspear Way, Hemel Hempstead, Hertfordshire,  
HP2 4TZ  
Do not attempt to replace the battery of your HannsPad yourself, you may damage the battery and this could cause  
overheating and injury. The lithium-ion battery in you HannsPad should be replaced only by HANNspree or a HANNspree  
Authorized Service Provider, and must be recycled or disposed of separately from household waste. Do not incinerate the  
battery. For more information about battery recycling and replacement, go to  
4
 
 
Declaration  
1. The information in this manual may not, except under written license by The Company, be copied, transmitted,  
distributed, or stored.  
2. Although efforts have been made for the correctness and completeness during the preparation of the manual, there is  
no guarantee that this manual is free from any error or omission. The Company assumes no reliability regarding the  
errors or omissions that might exist in the manual.  
3. For sustainable development, The Company reserves the right to modify and improve any product described in this  
manual without prior notice.  
4. Under no circumstance shall the Company assume any liability, direct or indirect, related to data or income loss, or any  
special, accidental, incidental or indirect losses.  
5
 
 
What’s in the box  
Check Supplied Items  
Adapter head (UK)  
Adapter head (EU)  
Tablet PC SN1AT75 (HSG1310)  
Micro USB cable  
NOTE:  
The included adapter head may vary depending on the region.  
The illustrations in this document may appear differently from your model.  
This Quick Start Guide and a Warranty card are also included.  
• If any item is damaged or missing, contact your point of purchase for assistance.  
• Use only approved accessories.  
• Accessories may vary by country or region.  
6
 
1. Product Overview  
1.1 Front View  
1
4
3
2
No.  
Item  
Description  
1
2
3
Touch Screen  
ESC Key  
Displays the user interface and receives touch input.  
Return to the previous page or menu item.  
Power Key  
• Press and hold to turn the device on or off.  
• Press to turn the backlight on / off and put the device into  
sleep mode.  
4
Front Camera  
For video chatting or taking self-portrait pictures.  
About the Power key:  
Power on: Press and hold the key for 2~3 seconds until the device is turned on.  
Power off: Press and hold the key until the option menu appears on the screen. Select Power off and tap  
OK to turn the device off.  
7
 
   
1.2 Back View  
1
2
3
4
5
6
7
8
No.  
Item  
Description  
1
2
Rear Camera  
Power Key  
For taking pictures or recording videos.  
• Press and hold to turn the device on or off.  
• Press to turn the backlight on / off and put the device into  
sleep mode.  
3
Reset Hole  
Insert a pointed object, such as a paper clip, to force the  
device to turn off its power.  
4
5
Earphone Jack  
Connects to an earphone using a 3.5 mm audio jack.  
Micro USB Port/Power Connects to a PC using the supplied USB cable.  
Input  
6
7
8
ESC Key  
Return to the previous page or menu item.  
For audio input.  
Microphone  
MicroSD Card Slot  
Insert a microSD card for additional storage space.  
8
 
 
2. Initial Operation  
2.1 Managing and Charging the Battery  
Before using the tablet PC for the first time, fully charge the battery. This tablet PC has a  
built-in polymer battery; use only the dedicated charger to charge the device.  
In order to prolong the service life of the device, use the device until the battery is depleted before  
charging the battery the first two times.  
To charge the battery, connect the charger / adapter to the device and the Micro USB Port.  
NOTE:  
For the first two times of charging the battery, the charging time may take up to 10 hours; succeeding times  
may take up to 5 hours.  
During charging, the battery icon on the screen will scroll.  
When charging is complete, the battery icon will turn blue and stop scrolling.  
When you plug in the charger after the device shuts down due to low power, it may take a while before the  
system enters the Home screen.  
When the device is not in use, be sure to turn off the device.  
If the device will not be used for a long time, be sure to discharge and then charge the battery once  
a month.  
The built-in polymer battery must be recharged regularly. Battery damage caused by depletion or by  
the use of an unauthorized charger are not covered by the warranty.  
9
 
   
2.2 Connecting to the Wi-Fi Network  
A Wi-Fi connection makes it easy to connect to the Internet. Once you have successfully connected  
to a Wi-Fi network, the device will automatically connect to the network when you are within range.  
To configure the Wi-Fi connection, do the following:  
1. Tap and drag the status bar downward to open the notification panel.  
2. On the Quick Settings screen, tap SETTINGS.  
3. Turn on Wi-Fi. The device searches for available networks within range and displays the  
searched Access Point (AP) names on the right panel.  
NOTE:  
Tap the Wi-Fi switch button to turn Wi-Fi on or off.  
The Wi-Fi icon showing  
The Wi-Fi icon showing  
indicates Wi-Fi is turned off.  
indicates Wi-Fi is turned on.  
4. Tap an access point name that you want to connect to. If the selected access point is  
protected by a password, the device will prompt for the password.  
5. If prompted, enter the password to connect to the AP.  
NOTE:  
The password entry is required only when connecting to the AP for the first time.  
To make the Wi-Fi password visible while typing it, select the “Show password” checkbox.  
6. Tap Connect.  
NOTE:  
Some public places offer free wireless internet access. This means no password is required to establish  
the connection.  
For secured networks, you may need to enter several parameters to complete the settings. If you are not  
sure about the parameters, please contact your local Internet Service Provider (ISP).  
This tablet PC keeps track and recognizes Wi-Fi networks that have been connected before. Once Wi-Fi is  
turned on and a known connection is detected, the device automatically connects to that network.  
10  
 
 
2.3 Connecting PC and Data Transmission  
Use the supplied USB cable, connect the device to the PC to transfer data or power up the device.  
NOTE: USB charging only supports 500mA. If the battery power is lower than 4%, the device cannot be turned  
on.  
To enter the USB disk mode to copy and delete files to and from the PC, do the following:  
1. When the operation menu appears, tap “USB connected”: Tap “Turn on USB storage” on the  
prompting window, then enter the data transmission state.  
2. Locate the tablet storage card and SD card (if the card has been plugged in) in My  
Computer list.  
3. After data transmission, tap “Turn off USB storage”, and then it will quit the data  
transmission state.  
NOTE: Before quitting the state of data transmission, please safety remove them from the PC, otherwise the  
file may be missing.  
2.4 Use Micro SD card  
After connecting the device to a PC, you will find two removable disks, the front one is the  
built-in-memory disk, the other one is the Micro SD card disk. If there is no card plugged in, the  
second disk cannot be opened. The device supports up to 32GB Micro SD card expansion.  
Plug-in: insert the memory card with the side with prints facing to the front of the device. Push the  
memory card into the card slot until it is firmly seated. Now the device can access the data and play  
the files stored on the card.  
Plug-out: push Micro SD card slightly inward to release it from the slot. Then gently pull it out of the  
card slot.  
11  
 
   
3. The Android Interface  
3.1 Home Screen  
After powering on the device, the locked Home screen is displayed. After you unlock the screen, the  
main Home screen appears.  
The following describes the main touch screen area and some tips on how to use the touch screen.  
Status Bar  
Widget  
(Google Search)  
Default AndroidTM  
applications  
Navigation Bar  
Item  
Description  
Status Bar  
Display notifications and system icons such as Wi-Fi connection  
status, battery power/ battery charging status, current time, and  
USB connection status.  
Widget (Google Search)  
Enter the text you want to search in the search box.  
Tap an icon to open the corresponding application.  
Default AndroidTM  
applications  
12  
 
   
Item  
Description  
Navigation Back key  
Bar  
Tap to return to the previous screen.  
(
)
Home key  
Tap to return to the Home screen.  
(
)
Shortcut key  
Tap to view the most-recently accessed applications.  
• To access the specific application, tap directly on the icon.  
(
)
• To remove a thumbnail from the list, swipe the icon upward  
or downward.  
Screenshot key Tap to capture the snapshot of the current screen.  
(
)
3.2 Customizing the Home Screen Panels  
You can customize the wallpaper of your Home screen with the default wallpaper or with the photos  
stored in the device. Long press the touch-screen, the Wallpaper option menu will appear on the  
screen. Then choose the desired option from the list.  
3.3 Managing Applications  
Add application shortcuts: Long press an application icon from the application menu and then  
drag the icon to the Home screen to add as shortcut.  
Moving application shortcuts: Long press an application icon in the Home screen until the  
positioning gridlines appear. Then drag the icon to the desired location and release your finger.  
Remove application shortcuts: Long press an application icon in the Home screen, the top of  
the screen displays . Drag the application icon towards  
your finger to remove the application shortcut.  
until it turns red, and then release  
13  
 
   
3.4 Creating Application Folders  
You can combine several similar applications in a folder. Simply, drag one application icon over  
another application icon and release it. A folder is automatically created.  
4. System Firmware Update  
Android devices automatically receive over-the-air (OTA) updates. To manually check for a firmware  
update, select Settings > About tablet > Wireless update.  
14  
 
   
5. Product Specifications  
Operating System  
Processor  
Memory  
Android 4.4x  
Platform  
Quadcore 1.3G cortex-A7  
1 GB  
Storage  
Storage  
8 GB EMMC  
LCD Panel with LED backlight, 210 cd/m2  
10.1 inch, 1024x600  
Capacitive type  
Brightness  
Resolution  
Type  
Display  
Sensor (points)  
WLAN  
Multi touch  
WLAN(802.11 b/g/n)  
BT4.0  
Bluetooth  
Communications  
Sensor  
Front camera: 0.3MP  
Rear camera: 2MP (AF)  
Camera  
3 axis Accelerometer  
G Sensor  
Yes, Supported x/y/z axis and +/- direction  
Yes, resolution: 10 bits  
DC Jack in x1  
3.5mm x1  
DC power port  
Headphones  
Microphone  
Built-in  
I/O Port  
Micro USB 2.0 x1 (OTG), Supported USB K/B, Mouse,  
USB flash disk, 2.5" HDD, battery charging function  
USB 2.0  
Card reader  
Speakers output spec.  
Power  
Micro SD x1, Max. supported 32GB  
8ohm, 1W x2  
Yes  
HW button  
Volume  
Yes  
Battery  
3.7V Li-Polymer, 5000mAh  
>= 5 hours @ 720p Videp playback, WiFi off, WebCam  
off, brightness 60%, Volume 50%  
Operation Battery Life  
Power  
Standard charge: 0~450C  
Discharge: 0~550C  
Battery Operating  
Temperature  
Adaptor  
AC 100V~240V , DC 5V/1.5A  
259.5mm x 148.5mm x 12.0mm  
Dimension  
Dimension(W*D*H mm)  
15  
 
 
6. Appendix  
Warranty and Service  
Warranty and service and related information, please refer to, the warranty card or Hannspree  
support site below for further help and support with your device including how to install software  
updates if available and much more:  
FAQ  
FAQ (Frequent Asked Questions) please refer to the below link:  
Resetting Your Device to Factory Defaults  
If you need to reset your device to the factory default settings for any reason please follow the  
process below:  
WARNING!!!  
Please be aware any information currently on the device will be permanently erased by following  
this procedure.  
1. From the Home screen, tap Settings.  
2. Tap Backup & Reset.  
3. Select Factory data reset.  
4. Leave the erase SD card option unchecked and tap Reset tablet.  
5. Tap erase everything.  
The unit will now reset itself back to factory reset and any previous information/data will have  
been permanently erased.  
NOTE: Some of the applications downloaded from Play Store or produced by other third party are not fully  
supported on this device.  
16  
 
 

HannsG Computer Monitor HW173DB User Manual
Harbor Freight Tools Saw 37412 User Manual
Havis Shields Automobile Accessories KK ST FLIP User Manual
Honeywell Electric Heater HZ 8000 User Manual
Honeywell Ventilation Hood ER150 User Manual
HP Hewlett Packard PDAs Smartphones h4000 Series User Manual
HP Hewlett Packard Weather Radio 3586A User Manual
Hunter Fan Outdoor Ceiling Fan 21705 User Manual
Husqvarna Brush Cutter 324RX User Manual
Ikelite Digital Camera F50fd User Manual