Grundig CRT Television MF 72 6510 8 User Manual

COLOR  
TELEVISION  
LENARO 72 FLAT  
MF 72-6510/8 IDTV  
DEUTSCH  
ENGLISH  
 
____________________________________________  
Information  
Displaying digital station reception properties  
Technical data  
Service information for dealers  
Environmental note  
Troubleshooting  
CONTENTS  
36-39  
36  
37  
37  
37  
38  
39  
Additional Information for units sold in the UK.  
3
 
GENERAL INFORMATION  
__________________  
Special features of your digital receiver  
This television can receive and process all analogue and all  
unencrypted digital stations. This television set has an integrated  
digital and analogue receiver. The digital receiver unit converts the  
signals from digital stations to provide outstanding audio and  
picture quality.  
The TV guide (only for digital stations) tells you of any schedule  
changes at short notice, and provides an overview of all the sta-  
tions’ schedules for the next few days.  
If the broadcaster provides it, you can call up detailed information  
on each programme at the touch of a button.  
This television has a very comprehensive, user-friendly menu system.  
The menu is displayed on the television screen, and the functions of  
the remote control buttons are explained.  
Receiving digital stations  
You need a digital outdoor or indoor antenna (passive or active  
indoor antenna with its own power supply) to receive digital  
stations.  
Unlike analogue broadcasting, not every station has its own trans-  
mission frequency. Instead, several stations are grouped into what  
are known as bouquets on a regional or national level.  
You can find the current transmission information on teletext from  
various broadcasters, or look in a TV guide or on the Internet.  
4
 
___________________________  
SET-UP AND SAFETY  
Please note the following information when setting up your television set.  
10  
cm  
10  
cm  
20 cm  
20  
cm  
This television set is designed to receive and display video and audio  
signals.  
Any other use is expressly prohibited.  
The ideal viewing distance is 5 times the screen diagonal.  
External light falling on the screen impairs picture quality.  
Ensure sufficient clearance between the TV and the wall cabinet.  
The television set is designed for use in dry rooms. If you do use it in the  
open, please ensure that it is protected from moisture, such as rain or  
splashing water. Do not expose the television set to any moisture.  
Do not place any vessels such as vases on the television, as they may  
spill liquid, thus presenting a safety risk.  
Place the television set on a solid, level surface. Do not place any  
objects such as newspapers on the television set or cloth or similar items  
beneath it.  
Golf  
am  
g
K
Do not place the television set close to heating units or in direct sunlight,  
as this will impair cooling.  
Heat build-up can be dangerous and shortens the operating life of the  
television set. For reasons of safety, have a specialist remove any dirt  
deposits in the set from time to time.  
Keep the television set away from magnetic fields (loudspeaker boxes,  
for example).  
VICE !  
! SER  
Do not open the television set under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
Ensure that the mains cable is not damaged.  
Thunderstorms are a danger to all electrical devices. Even if the tele-  
vision set is switched off, it can be damaged by a lightning strike to the  
mains or the antenna cable. Always disconnect the mains and antenna  
plugs during a storm.  
Clean the screen with a soft, damp cloth. Only use plain water.  
Note:  
Do not connect any other equipment while the device is switched on.  
Switch off the other equipment as well before connecting it.  
Only plug the device into the mains socket after you have connected the  
external devices and the antenna.  
5
 
__________  
CONNECTION/PREPARATION  
Connecting the antenna and the mains cable  
TV  
R
L
AV  
AV  
3
2
AUDIO  
OUT  
R
AV  
1
1
2
1
2
Plug the cable of the outdoor or indoor antenna (passive or active  
indoor antenna with its own power supply) into the antenna socket  
»Ä« of the television set.  
Note:  
When connecting an indoor antenna you may have to try it out at  
different positions until you get the best reception.  
Plug the mains cable into the wall socket.  
Note:  
Only plug the device into the mains socket after you have  
connected the external devices and the antenna.  
Inserting batteries in the remote control  
1
Open the battery compartment by removing the lid.  
2
Insert the batteries (Mignon type, for example UM-3 or  
AA, 2x1,5V).  
Observe the polarity (marked on the base of the battery  
compartment).  
3
Close the battery compartment.  
Note:  
If the television no longer reacts properly to remote  
control commands, the batteries may be flat. Be sure to  
remove used batteries.  
The manufacturer accepts no liability for damage re-  
sulting from used batteries.  
Environmental note  
Batteries, including those which contain no heavy metal,  
may not be disposed of with household waste. Please  
dispose of used batteries in an environmentally sound  
manner. Find out about the legal regulations which apply  
in your area.  
6
 
____________________________________________  
OVERVIEW  
The remote control  
Ǽ
Switches off the television set (stand-by).  
Switches between picture formats;  
page stop in teletext mode.  
E
PIP  
TV-G  
z
TV-G  
0…9  
Calls up the TV guide.  
Switches the television on from stand-by mode.  
Selects channels directly.  
d
Sound on/off (mute).  
Opens the »MAIN MENU« menu.  
Zap function.  
i
TXT  
AV  
P
Z
SCAN  
S
PAT  
P+, P-  
Switch the television on from standby;  
select stations step by step;  
move the cursor in the menus up and down.  
d
VCR  
DVD  
SAT  
Ǹ Ƿ  
Adjust the volume;  
move the cursor left/right.  
Tele Pilot 162 C  
OK  
Calls up the station list.  
Activates various functions.  
TXT  
AV  
Switches between teletext and TV modes.  
Selects the AV channel positions and the most recently  
watched television station;  
switches to double character size in teletext mode.  
SCAN  
PAT  
S
Selects the channel scan function.  
Selects the Double Window function.  
Selects sub-pages in teletext mode.  
Subtitle on/off.  
P
Updates the page in teletext mode.  
7
 
____________________________________________  
OVERVIEW  
z
Selects various picture settings;  
scrolls back a page in teletext mode.  
Ȅ
Ƿ
F
Time on.  
PIP  
TV-G  
z
Moves to the next page in teletext mode.  
Freeze-frame  
Selects the desired chapter in teletext mode  
Selects various audio settings;  
selects the desired topic in teletext mode  
VCR, SAT Switches to operating a GRUNDIG video  
DVD  
recorder, a GRUNDIG satellite receiver or  
a GRUNDIG DVD player.  
TXT  
AV  
P
Keep the relevant buttons (»VCR«, »SAT«, »DVD«)  
pressed down. Then press the button you require.  
SCAN  
S
PAT  
d
Note:  
VCR  
DVD  
SAT  
The functions available to you depend on the model of  
the device you are using.  
Just try it out.  
Tele Pilot 162 C  
The front of the television set  
Ȃ
Switches the television into and out of  
standby mode  
+ PR -  
Channel selection  
Switches the television on from stand-  
by  
Adjusts the volume  
z -  
+
S-VIDEO  
Video signal input for S-video  
camcorders  
VIDEO IN  
L AUDIO IN R  
y
Video signal input for camcorder  
Audio signal input for camcorder  
PR  
S
-V  
ID  
EO  
Headphone jack (3.5 mm ø jack  
plug)  
VIDEO IN  
L
AUDIO IN  
R
8
 
SETTINGS  
______________________________________________  
Searching for television stations  
The television is equipped with an automatic station search system.  
You start the search and can then sort the television stations into  
your order of preference.  
There are 899 preset positions for digital stations and 100 for ana-  
logue television stations, to which you can assign television stations  
from the antenna or from the cable connection (analogue pro-  
grammes).  
Language  
English  
Deutsch  
Francais  
Italiano  
Español  
Portuguesa  
Nederlands  
Eλληvικα  
Dansk  
Svenska  
Suomi  
Türkçe  
Polski  
Pycckꢀꢁ  
Magyar  
Slovenãina  
âe‰tina  
1
2
Switch on the television with »  
press »P+« on the remote control.  
– The »Language« menu appears when the television is first  
switched on.  
Ȃ« on the television set, then  
Norsk  
Select  
Hint:  
If the »Language« menu does not appear on the screen, follow  
the instructions on page 34 to retune all television channels  
using the automatic search.  
Select language with »P+«, »P-«, » « or » « and press  
»OK« to confirm.  
Ǹ
Ƿ
– The »Channel search - Digital« menu appears and the search  
begins. The automatic search may last several minutes  
depending on the number of television channels received.  
– The search is finished when the message »Done« appears.  
DVB Menu  
Manual Search  
3
4
Press »Ȅ« (green) to quit the station search.  
Automatic Search  
Reset receiver  
Installation  
– The »DVB Menu« appears.  
Select »Installation« by pressing »P-« or »P+« and press  
»OK« to confirm.  
– The »Installation« menu appears.  
Signal Information  
Select  
F
Back  
5
6
Select »Region« with »P-« or »P+«.  
i
Exit  
Select the country with » « or » «.  
Ǹ
Ƿ
Finishing the settings  
1
Press »i« to finish the settings.  
Note:  
If you can only receive analogue television stations, adjust the  
settings as described in the chapter “Changing stored channels  
for analogue stations” on page 32.  
9
 
SETTINGS  
______________________________________________  
Changing stored channels for digital stations  
You can change the order of preset stations as required, delete  
stations you do not need, and block channel positions (parental  
lock).  
MAIN MENU  
Sound  
Picture  
Preset list  
Channel settings  
Settings  
Deleting channels  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
i
Exit  
List  
Select  
2
Select »Preset list« with »P+« or »P-« and press »OK« to con-  
firm.  
– The menu »Edit channels - TV« appears.  
Edit channels - TV  
3
4
Select the channel you wish to delete with »P+« or »P-«.  
1 Das Erste  
2 ZDF  
F
Press » « (blue) to prepare the channel for deletion and press  
« (green) to delete.  
3 SAT1  
4 ZDF  
»Ȅ  
5 Doku/KiKa  
6 Info/3sat  
7 N24  
8 ProSieben  
9 arte  
Sorting television channels  
1
In the »Edit channels - TV« menu, select the channel to be  
moved by pressing »P+« or »P-«.  
1 2 3 4 Select Favourite  
Ƿ
Ȅ
TV  
Select  
i
Move  
F
Delete  
Ƿ
2
3
Highlight the channel with » « (yellow).  
Exit  
Select a new channel position by pressing »P+« or »P-« and  
Ƿ
then press » « (yellow) to confirm.  
– All of the channels that follow move up one position.  
Note:  
To sort the other television channels, repeat steps 1 to 3.  
Stations that are assigned to fixed channels (stations with LCN  
coding such as french stations) can not be moved.  
10  
 
SETTINGS  
______________________________________________  
Parental lock (block channel positions)  
You can block channels which are unsuitable for children.  
TV setup  
Name  
Frequency  
Adult lock  
1
Select the desired television channel with »P+« or »P-« and  
confirm with »OK«.  
– The »TV setup« menu appears.  
arte  
C6 (184MHz)  
No  
Quality: 68%  
2
3
Select »Adult Lock« with »P-« or »P+« and activate it with  
»
« or » «.  
Ǹ
Ƿ
Select  
Press »  
Ȅ« (green) to confirm the setting.  
Ȅ
Submit  
F
Back  
– The blocked TV station is marked with a key.  
Notes:  
To switch off parental lock, repeat steps 1 to 3.  
The name can not be changed.  
The frequency display is designed for your information and  
should not be changed.  
Creating a list of favourites  
You can select your favourite stations and save them in up to four  
lists.  
Edit channels - TV  
1
Select the station with »P+« or »P-« and press »1« – »4« to  
enter it into lists of favourites 1 – 4.  
List  
1
1 Das Erste  
2 ZDF  
To remove, press the corresponding number button again.  
You can enter the selected station in more than one favourite  
list.  
3 SAT1  
4 ZDF  
5 Doku/KiKa  
6 Info/3sat  
7 N24  
8 ProSieben  
9 arte  
You can switch between the station list and your favourites by  
pressing »  
Ȅ« (green).  
1 2 3 4 Select Favourite  
Ƿ
Ȅ
TV  
Move  
Finishing the settings  
F
Select  
Delete  
1
Press »i« to finish the settings.  
i
Exit  
11  
 
SETTINGS  
______________________________________________  
DVB settings  
Selecting the preferred audio language  
You can set a preferred language for all channels.  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
DVB Menu  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Manual Search  
Automatic Search  
Reset receiver  
Installation  
3
Select »Installation« by pressing »P-« or »P+« and press  
»OK« to confirm.  
– The »Installation« menu appears.  
Signal Information  
Select  
F
4
5
6
Select the »Audio« line with »P-« or »P+«.  
Back  
i
Exit  
Press » « or » « to select the language.  
Ǹ
Ƿ
Press »i« to finish the setting.  
Selecting the subtitle language  
You can select the language for the subtitles.  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Installation  
3
Select »Installation« by pressing »P-« or »P+« and press  
»OK« to confirm.  
Audio  
English  
English  
PanScan  
ENG  
Subtitle  
– The »Installation« menu appears.  
Adjustment  
Region  
4
5
6
Select »Subtitle« with »P-« or »P+«.  
Select time zone  
Automatic  
Press » « or » « to select the language.  
Select  
Ǹ
Ƿ
Press »i« to finish the setting.  
F
Back  
i
Exit  
Select the picture conversion  
You can make the following settings:  
»None« for an unchanged transmitted picture format.  
»PanScan« for wide-screen playback without black bars on the top  
and bottom edges of the screen.  
»Letterbox« for wide-screen playback with black bars on the top  
and bottom edges of the screen.  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
12  
– The »DVB Menu« appears.  
 
SETTINGS  
______________________________________________  
3
Select »Installation« by pressing »P-« or »P+« and press  
»OK« to confirm.  
Installation  
Audio  
English  
English  
PanScan  
ENG  
Subtitle  
– The »Installation« menu appears.  
Adjustment  
Region  
4
5
6
Select the »Adjustment« line with »P-« or »P+«.  
Select time zone  
Automatic  
Press » « or » « to select the screen format.  
Ǹ
Ƿ
Select  
Press »i« to finish the setting.  
F
Back  
i
Exit  
Automatic or manual time zone  
You can set the time difference to Greenwich meantime yourself or  
let the receiver set it automatically.  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
3
Select »Installation« by pressing »P-« or »P+« and press  
»OK« to confirm.  
Installation  
– The »Installation« menu appears.  
Audio  
English  
English  
PanScan  
ENG  
Subtitle  
4
5
Select »Select time zone« with »P-« or »P+«.  
Bildformat  
Region  
Press » « or » « to select »Automatic« or »Manual«.  
Ǹ
Ƿ
Select time zone  
Time zone  
Daylight saving  
Manual  
GMT +01:00  
No  
Setting the time zone  
Select  
You can only set the time zone if the »Manual« option is selected in  
the »Set time zone« menu option.  
F
Back  
i
Exit  
1
2
Select »Time zone« with »P-« or »P+«.  
Press » « or » « to select your time zone.  
Ǹ
Ƿ
Selecting summer time  
You can only select summer time if the »Manual« option is selected  
in the »Set time zone« menu option.  
Installation  
Audio  
English  
English  
PanScan  
ENG  
Subtitle  
Bildformat  
Region  
1
2
Select »Daylight saving« with »P-« or »P+«.  
Select time zone  
Time zone  
Daylight saving  
Manual  
GMT +01:00  
No  
Press » « or » « to select »No« or »Yes«.  
Ǹ
Ƿ
Select  
F
Back  
i
Exit  
13  
 
______________________________________________  
SETTINGS  
Picture settings  
1
2
3
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Noise Reduction Off  
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with  
»P+« or »P-« and adjust them with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Note:  
After a short while the »Picture« menu reappears.  
The settings are saved as the »User« picture default setting.  
5
Press »i« to finish the settings.  
Setting the picture features  
You can set the noise suppression of the picture.  
You can set the noise suppression to one of four settings: »Low«,  
»Medium«, »High« and »Off«.  
1
2
3
4
Press »i« to open the »MAIN MENU«.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Noise Reduction Off  
– The »MAIN MENU« appears.  
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Select »Noise Reduction« with »P+« or »P-« and set the desi-  
F
Back  
red value with » « or » «.  
Ǹ
Ƿ
i
Exit  
Press »i« to finish the settings.  
14  
 
______________________________________________  
SETTINGS  
Audio settings  
MAIN MENU  
1
Press »i« to open the »MENU«.  
– The »MENU« appears.  
Sound  
Picture  
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.  
– The »Sound« menu appears.  
Preset list  
Channel settings  
Settings  
Note:  
Further operation is explained in the following sections.  
i
Exit  
Select  
Volume  
The standard volume is set here. This is the volume of the device  
after switching on.  
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Dynamic Bass  
Equalizer  
Headphone  
Stereo  
Normal  
Off  
1
Select »Volume« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
On  
Balance  
F
Back  
i
Exit  
1
Select »Balance« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
Stereo / two channel, mono  
If the device receives two channel programmes, e.g. a film with the  
original sound on sound channel B (display: »Dual II «) and the  
dubbed version on sound channel A (display: »Dual I«), you can  
select the sound channel you desire.  
If the device receives stereo or Nicam programmes, it switches  
automatically to stereo sound (display: »Stereo«).  
You can switch the sound to »Mono« if the stereo reception  
quality is poor.  
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Stereo  
Normal  
Off  
Dynamic Bass  
Equalizer  
Headphone  
On  
1
Select »Sound type« with »P+« or »P-« and adjust the setting  
with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Stereo width  
Widens the audio output for stereo programmes and improves the  
sound with mono reception.  
1
2
Select »Sound mode« with »P+« or »P-«.  
Press » « or » « to select the setting.  
Ǹ
Ƿ
15  
 
______________________________________________  
SETTINGS  
Automatic volume  
The television channels broadcast at different volumes. The automa-  
tic volume limiting (AVL) function means the volume is kept the same  
when you switch between channels.  
1
Select »AVL« with »P+« or »P-« and then select »On« with  
« or » «.  
»
Ǹ
Ƿ
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Dynamic bass  
You can amplify the bass-effect using this setting.  
Stereo  
Normal  
Off  
Dynamic Bass  
Equalizer  
Headphone  
On  
1
Select »Dynamic Bass« with »P+« or »P-« and then  
select »On« with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Equalizer  
The equalizer offers you four preset sound settings (Music, Sports,  
Cinema and Speech) and two which you can create yourself (User 1  
and User 2).  
1
Select »Equalizer« by pressing »P+« or »P-« and press »OK«  
to confirm.  
– The »Equalizer« menu appears.  
Equalizer  
Music  
Sport  
Cinema  
Speech  
User 1  
User 2  
100 330  
Hz Hz KHz KHz KHz  
1
3.3 10  
2
Select the »User 1« or »User 2« audio setting using »P+« or  
»P-« and press »OK« to confirm.  
– The »100 Hz« frequency band is activated.  
F
Back  
i
Exit  
Change  
3
4
Set the value using »P+« or »P-« and select the next frequency  
band by pressing » « or » «.  
Ǹ
Ƿ
Press »OK« to save the setting.  
Concluding the settings  
Press »i« to finish the settings.  
1
16  
 
___________________  
TELEVISION OPERATION  
Basic functions  
Switching on and off  
1
Switch on the television by pressing the »  
vision set.  
Ȃ« button on the tele-  
– The device switches to standby mode.  
Switch the television on with »1…0« or »P+« or »P-«.  
PIP  
TV-G  
z
2
3
Press the »Ǽ« button to switch the television to standby mode.  
Press »1…0« or »P+« or »P-« to switch on the device from  
standby mode.  
Completely switch the television off by pressing »  
television set.  
Ȃ« on the  
– This saves electricity.  
Selecting channels  
TXT  
AV  
P
1
Enter single-digit or multi-digit preset channel numbers by  
pressing »1 ... 0« on the remote control.  
SCAN  
S
PAT  
– Channels with no stations assigned are ignored.  
d
2
Press »P+« or »P-« to move up and down channels.  
VCR  
DVD  
SAT  
Selecting AV channel positions  
1
Use »AV« to select AV channels directly.  
Tele Pilot 162 C  
Adjusting the volume  
1
Adjust the volume with » « or » «.  
Ǹ
Ƿ
Muting  
1
Use » « to switch the sound off (mute) and to switch it on  
again.  
p
Displaying/concealing time  
1
You can display or conceal the time by pressing the »  
button.  
Ȅ«  
Selecting stations from lists  
You can select stations from various lists (e.g. all stations,  
favourites).  
1
Press »OK« to open the station list.  
– The station list »All programmes« appears.  
2
3
Press »P« to switch the station list.  
Press »P-« or »P+« to select the station and press »OK« to call  
it up.  
17  
 
___________________  
TELEVISION OPERATION  
Picture settings  
1
Select the desired picture setting from »User«, »Natural«,  
z
»Rich« or »Soft« with »  
«.  
You can alter the »User« picture setting, see the ”Picture  
settings” chapter on page 14.  
Audio settings  
F
1
Press » « to select the audio setting »User 1«, »User 2«,  
»Music«, »Sports«, »Cinema« or »Speech«.  
You can alter the »User 1« and »User 2« audio setting – see  
the “equalizer” chapter on page 16.  
Zap function  
This function allows you to save the television channel which you  
are currently watching and switch to other channels (zapping).  
1
Select the channel you want to save in the zap memory with  
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by  
pressing »Z«.  
>
– The display »z – P1 BBC1« appears in the screen.  
2
3
Change channels with »1…0« or »P+« »P-«.  
You can now use »Z« to switch between the saved channel (in  
the example, BBC1) and the channel you were watching before.  
4
Press »i« to quit the zap function.  
– The display disappears.  
18  
 
TELEVISION OPERATION  
___________________  
TV guide  
The electrical TV guide offers an overview of all programmes that  
will be broadcast in the next week (only for digital stations).  
1
2
Press »TV-G« to view the station information.  
– Information about the current and following programme  
appears.  
To show detailed descriptions, press »TV-G« again.  
Notes:  
Not all stations supply a detailed TV guide.  
Many broadcasters supply the daily programme but no  
detailed descriptions.  
Some broadcasters do not supply any information.  
3
4
5
6
Scroll through the station information with »P-« or »P+«.  
Select the next programme with » « or » «.  
Ǹ
Ƿ
To show an overview of all stations, press »TV-G« again.  
Scroll through the station information with »P-«, »P+«, »  
«
«
Ǹ
or » «.  
Ƿ
7
8
To show an overview of the next week, press »OK« again.  
Scroll through the station information with »P-«, »P+«, »  
Ǹ
or » «.  
Ƿ
9
Press »i« to quit the TV guide.  
19  
 
___________________  
TELEVISION OPERATION  
Changing the picture format  
The television automatically switches to the 16:9 format, if this  
format is recognised by the Euro-AV socket.  
1
Select the picture format with »  
format, for example »16:9«, appears on the screen.  
You can choose between the following picture formats:  
«. The selected picture  
E
»Auto« format  
The picture format is automatically switched to »16:9« with 16:9  
channels.  
For programmes in 4:3 format, the picture automatically fills the  
screen.  
»4:3« format  
For 4:3 programmes, select picture format »4:3«.  
»16:9« and »14:9« formats  
During programmes in 4:3 format, the picture is stretched horizon-  
tally if »16:9« or »14:9« is selected.  
The picture geometry is stretched horizontally.  
With actual 16:9 signal sources (from a SET-TOP box on the  
Euro-AV socket) the picture fills the screen completely and with the  
correct geometry.  
»Letterbox« format  
Letterbox setting is especially suitable for programmes in 16:9  
format.  
The black borders which are usually at the top and bottom of the  
screen are eliminated, 4:3 pictures fill the screen.  
The transmitted pictures are enlarged, but are slightly cropped at  
the top and bottom. The picture geometry remains unchanged.  
»Subtitle 1« and »Subtitle 2« format  
If you cannot read the subtitles which appear on the bottom of the  
screen (especially during programmes with 4:3 format and if the  
»Letterbox« format is selected), then select »Subtitle 1«.  
If you are still unable to read the subtitles, select »Subtitle 2«.  
20  
 
_______________________________  
TELETEXT MODE  
TOP text or FLOF text mode  
Your television has a teletext memory for 1024 pages.  
1
2
Press »TXT« to switch to teletext mode.  
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
PIP  
TV-G  
z
Note:  
At the bottom of the screen, you will see an information line  
consisting of a red, green and, depending on the station,  
yellow and blue text field. Your remote control has buttons with  
the corresponding colours.  
z
3
4
5
6
7
Press »  
« (red) to scroll back a page.  
Press »  
Ȅ
« (green) to scroll to the next page.  
TXT  
AV  
P
Ƿ
Press » « (yellow) to select chapters.  
SCAN  
S
PAT  
F
d
Press » « (blue) to select topics.  
VCR  
DVD  
Press »TXT« to switch off teletext mode.  
SAT  
Normal text mode  
1
Press »TXT« to switch to teletext mode.  
Tele Pilot 162 C  
2
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
3
4
5
Press »P-« to scroll back a page.  
Press »P+« to scroll to the next page.  
Press »TXT« to switch off teletext mode.  
Additional functions  
Overriding wait time  
1
2
3
Press »P«.  
– The television returns to television mode, the teletext page  
numbers are displayed in the upper left corner of the screen.  
Enter the teletext page number with »1...0«.  
– The page number appears in red, when the page is found it  
changes to green.  
Switch to the teletext page by pressing »P«.  
21  
 
_______________________________  
TELETEXT MODE  
Increasing character size  
If you have difficulty reading the text on the screen, you can double  
the character size.  
1
To enlarge the character size of a teletext page, press »AV«  
repeatedly.  
PIP  
TV-G  
z
Page stop  
A multiple page may contain several sub-pages, which are automa-  
tically scrolled by the transmitting station.  
1
2
Stop the sub-pages with »  
«.  
E
Press »  
« to quit the function.  
E
TXT  
AV  
P
Calling up a sub-page directly  
SCAN  
S
PAT  
If the selected teletext page contains further pages, the number  
of the current sub-page as well as the total number of pages is  
displayed.  
d
VCR  
DVD  
SAT  
1
2
3
Call up the sub-pages with »S«.  
z
Select the sub-pages with »  
« (red) or »Ȅ« (green).  
End this sub-page function with »S«.  
Tele Pilot 162 C  
Double window  
With this function the television programme and teletext are dis-  
played at the same time.  
1
2
Press »PAT«.  
– On the left you can see the television programme, on the right  
the teletext of the programme.  
Press »TXT« to quit the function.  
22  
 
______________  
CONVENIENCE FUNCTIONS  
Freeze-frame  
If you wish to view a particular scene for longer, you can freeze the  
current programme.  
Ƿ
1
2
Press » «.  
PIP  
TV-G  
z
Ƿ
Press » « again to end this function.  
Channel scan  
You can display 16 channels as freeze-frames with this function.  
1
Press »SCAN« to start the channel scan.  
– The television programme, which you are currently watching,  
and the programmes of the following 15 channels are scan-  
ned in intervals and displayed on the screen in succession.  
TXT  
AV  
P
2
3
If you wish to select a specific programme from those on offer,  
click on »OK« while the programme is displayed.  
SCAN  
S
PAT  
d
Press »SCAN« to end the channel scan.  
VCR  
DVD  
SAT  
Tele Pilot 162 C  
23  
 
______________  
CONVENIENCE FUNCTIONS  
Convenience functions with the »Settings« menu  
1
Press »i« to open the »MAIN MENU«.  
Settings  
Language  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
2
Select »Settings« with »P+« or »P-« and confirm with »OK«.  
– The »Settings« menu appears.  
TV –> AV2 & AV3  
Off  
Note:  
F
Back  
Further operation is explained in the following sections.  
i
Exit  
Select  
Changing the menu language  
1
Select »Language« with »P+« or »P-« and confirm with  
»OK«.  
– The »Language« menu appears.  
Language  
English  
Nederlands  
Türkçe  
2
3
Select the language with »P+«, »P-« and press »OK« to con-  
Deutsch  
Francais  
Italiano  
Español  
Portuguesa  
Eλληvικα  
Dansk  
Svenska  
Suomi  
Norsk  
Polski  
Pycckꢀꢁ  
Magyar  
Slovenãina  
âe‰tina  
firm.  
Press »i« to finish the setting.  
F
Back  
i
Exit  
Select  
Entering the switch-on and off times  
A switch-on and off timer can be set in the »Timer« menu. After this  
time has elapsed, the television switches to standby mode or swit-  
ches on from standby mode. You can enter the channel with which  
the television should switch on in »Program«.  
Timer  
Date  
11.11.2005  
08:24  
––:––  
––:––  
––:––  
Clock  
1
2
Select »Timer« with »P+« or »P-« and confirm with »OK«.  
On time  
Off time  
Alarm time  
Program  
Select »Date«, »Clock«, »On time«, »Off time«, »Alarm time«  
or »Program« with »P+« or »P-«.  
P1 ARD  
F
0..9  
Back  
i
Exit  
3
4
Enter the switch-on or off time and the channel with »1...0«.  
Press »i« to finish the setting.  
Switching on the degaussing function  
If your television has not been connected to a power supply for a  
longer period of time, clouding may occur due to strong magnetic  
fields. You can avoid this by briefly switching on the degaussing.  
Settings  
Language  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
TV –> AV2 & AV3  
Off  
1
Select »Degauss« with »P+« or »P-« and then select »ON«  
with » « or » «.  
Ǹ
Ƿ
– The screen is degaussed for a short period of time.  
F
Back  
i
Exit  
Select  
2
Press »i« to finish the setting.  
24  
 
______________  
CONVENIENCE FUNCTIONS  
Selecting the Euro-AV (Scart) output  
You can select which signal should be output at the Euro-AV sockets  
AV 2 and AV 3.  
You have the following options:  
– The channel, which you are currently viewing  
(TV AV2 and AV3).  
– The channel which has been selected last  
(TUNER1 AV2 and AV3).  
– The signal of the devices, which are connected to the AV inputs  
(AV1, AV2, AV3, AV3-S, AV4, AV4-S AV2 and AV3).  
Settings  
Language  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
TV –> AV2 & AV3  
Off  
1
2
3
Select »Scart Source« with »P+« or »P-«.  
F
Back  
i
Exit  
Select  
Press » « or » « to select the option.  
Ǹ
Ƿ
Press »i« to finish the setting.  
25  
 
_______________  
USING EXTERNAL DEVICES  
Note:  
Do not connect any other equipment while the device is switched on.  
Switch off the other equipment as well before connecting it.  
Only plug the device into the mains socket after you have connected the  
external devices and the antenna.  
Decoder or satellite receiver  
In order for the television to receive encoded programs from a  
privately operated station, a decoder is needed.  
Connecting a decoder or satellite receiver  
L
AV  
AV  
3
2
AUDIO  
OUT  
Decoder  
PAY-TV  
R
AV  
1
1
Connect the »AV1« socket on the television set and the appro-  
priate socket on the decoder using a EURO-AV cable.  
Notes:  
A satellite receiver can also be connected to this socket.  
If you want to use both a satellite receiver and a decoder, the  
decoder must be connected to the satellite receiver.  
Using a decoder  
1
Switch on the television and the decoder.  
2
Select the »AV1« preset channel by pressing »AV« repeatedly  
until »AV1« appears on the screen.  
S
-V  
ID  
E
O
V
ID  
EO  
IN  
L
AUDIO IN  
R
Headphones  
Connecting headphones  
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-  
phone socket on the television.  
Selecting the sound settings for the headphones  
Headphone  
Volume  
Balance  
Bass  
Treble  
Sound Type  
1
2
3
Press »i« to open the »MAIN MENU«.  
Select »Sound« with »P+« or »P-« and confirm with »OK«  
Select »Headphone« with »P+« or »P-« and confirm with  
»OK«.  
Stereo  
F
Back  
i
Exit  
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type«  
with »P+« or »P-« and set with » « or » «.  
Ǹ
Ƿ
26  
Press »i« to finish the setting.  
 
_______________  
USING EXTERNAL DEVICES  
Video recorder, DVD player or SET-TOP box  
Connecting the video recorder, DVD player or  
SET-TOP box  
L
AV  
AV  
3
2
AUDIO  
OUT  
R
AV  
1
VIDEO OUT  
ANTENNA IN  
L
110-240 V~  
50/60 Hz 35  
W
R
OUT  
TV DIGITAL AUDIO AUDIO OUT S-VIDEO OUT  
OUT  
EURO AV  
2
DECODER  
1
Connect the »AV1«, »AV2« or »AV3« television sockets and  
the corresponding sockets of the video recorder, DVD player or  
the SET-TOP box with a Euro-AV (Scart) cable.  
Using a video recorder, DVD player or SET-TOP box  
1
Switch on the video recorder, DVD player or SET-TOP box and  
select the function you wish to use.  
2
Select the »AV1«, »AV2« or »AV3« channel positions with  
»AV«.  
You can hear and see the video and audio information from  
the video recorder or the SET-TOP box on the television set.  
Notes:  
You can connect an external RGB device (DVD player) to the  
Euro-AV1 socket. However, you will need to use a fully assigned  
Euro-AV cable for this.  
You can copy recordings using the television from one external  
device to another, by connecting the playback device to Euro-  
AV1 and the recording device to Euro-AV2 and then selecting  
the »AV1« preset channel. However, you will not be able to  
view a television channel.  
Connecting the SVHS video recorder  
If you own a SVHS video recorder, you can connect it using a  
Euro-AV cable to the AV3 socket.  
Using a SVHS video recorder  
1
Switch on the video recorder and select the function you wish  
to use.  
2
Select the »AV3-S« preset channel with »AV«.  
You will see the picture and hear the sound of the video  
recorder on the television.  
27  
 
_______________  
USING EXTERNAL DEVICES  
Camcorder  
Connecting the camcorder  
1
Connect the yellow socket (VIDEO – picture signal) on the tele-  
vision and the corresponding socket on the camcorder (VHS,  
Video 8) with a cinch cable.  
R
P
S
-V  
ID  
E
O
VID  
EO  
IN  
L
AUDIO IN  
R
or  
Connect the S-VHS socket (S-VIDEO – picture signal) on the  
television and the corresponding socket on the camcorder (S-  
VHS, Hi 8) with a cinch cable.  
2
Connect the white and red sockets (L AUDIO R – sound signal)  
on the television and the corresponding sockets of the camcor-  
der with a cinch cable.  
Note:  
If a mono camera is connected, connect the white socket (L)  
of the television and the corresponding socket of the camera. Sel-  
ect »Mono« in the »Sound« menu during mono operation.  
Operating with a camcorder  
1
Switch on the camcorder, insert a cassette and start playback.  
2
Select the preset channel »AV4« (for VHS, Video 8) or »AV4-S«  
(for S-VHS, Hi 8), by pressing »AV« repeatedly until »AV4« or  
»AV4-S« appears in the screen.  
You will see the picture and hear the sound of the camcorder  
on the television.  
HiFi system  
Connecting the HiFi system  
L
AV  
AV  
3
2
AUDIO  
OUT  
R
AV  
1
R
L
AUDIO  
INPUT  
1
Connect the white and red sockets »L R AUDIO OUT« on the  
television and the corresponding sockets on the HiFi with a  
cinch cable.  
28  
 
______________________________  
SPECIAL SETTINGS  
Tuning analogue television stations  
These settings are only necessary if you can not receive digital  
stations. The television channel can be set directly or using the  
search.  
Analogue stations can be stored only on channel positions  
900 – 999.  
Tuning channels using the search  
1
Use »0« – »9« to select station position 900.  
2
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
3
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
Autoprogram  
Digital Setup  
BG  
C 06  
< >  
00  
01  
Off  
– The »Channel settings« menu appears.  
4
5
Select »Program No« with »P+« or »P-« and set the preset  
channel with » « or » «.  
Ǹ
Ƿ
Select »Search« with »P+« or »P-« and start the search with  
« or » «.  
F
»
Back  
Ǹ
Ƿ
i
Exit  
– If a strong station signal is received, the search is interrupted  
and the picture appears. Repeat the search until the channel  
you want appears on the screen.  
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
Autoprogram  
Digital Setup  
BG  
C 06  
< >  
00  
01  
Off  
Ǹ
Ƿ
6
7
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Note:  
To set other television stations, repeat steps 3 to 5.  
F
Back  
i
Exit  
Press »i« to finish the setting.  
29  
 
______________________________  
SPECIAL SETTINGS  
Fine tuning analogue television stations  
The television automatically tunes itself to the best possible recepti-  
on. You may need to carry out manual fine tuning in areas where  
there is poor reception.  
1
Press »i« to open the »MAIN MENU«.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
Autoprogram  
Digital Setup  
– The »MAIN MENU« appears.  
BG  
C 06  
< >  
00  
01  
Off  
2
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel settings« menu appears.  
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »  
«
Ǹ
or » «.  
Ƿ
F
Back  
i
Exit  
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Press »i« to finish the setting.  
Tuning the analogue television channels by  
entering the channel numbers  
1
Use »0« – »9« to select station position 900.  
2
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
3
4
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
Autoprogram  
Digital Setup  
– The »Channel settings« menu appears.  
BG  
C 06  
< >  
00  
01  
Off  
Select »Program No« with »P+« or »P-« and set the  
channel with » « or » «.  
Ǹ
Ƿ
5
6
Select »Channel« with »P+« or »P-« and confirm with »OK«.  
Press »OK« to choose between »S« (special channel) and »C«  
(channel).  
F
0..9  
C/S  
Back  
i
Exit  
7
Press » « or » « to switch up and down channels or use  
»1…0« to enter the channel number directly.  
Ǹ
Ƿ
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Ǹ
Ƿ
8
9
Select »Store« with »P+« or »P-« and confirm with »OK«.  
Note:  
To set other television stations, repeat steps 3 to 7.  
Press »i« to finish the setting.  
30  
 
______________________________  
SPECIAL SETTINGS  
Re-tuning all analogue television channels  
These settings are only necessary if you can not receive any digital  
stations or if you want to re-tune all analogue channels (e.g. if you  
have moved).  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
Autoprogram  
Digital Setup  
BG  
C 06  
< >  
00  
01  
Off  
Analogue channels can be stored only on station positions  
900 – 999.  
1
2
Use »0« – »9« to select station position 900.  
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
F
0..9  
Back  
i
Exit  
3
4
5
6
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel settings« menu appears.  
Select »Program No« with »P+« or »P-« and using » « or  
Ǹ
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
»
« enter the channel numbers from the point they should be  
BG  
Ƿ
C 06  
< >  
00  
01  
Off  
saved.  
Select »Autoprogram« with »P+« or »P-« and confirm with  
»OK«.  
– The »Country Selection« menu appears.  
Autoprogram  
Digital Setup  
F
Select the country using »P+«, »P-«, » « or » « and confirm  
Back  
Ǹ
Ƿ
i
Exit  
Select  
with »OK«.  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
Note:  
You can interrupt the search by pressing »i«.  
31  
 
SPECIAL SETTINGS  
______________________________  
Changing stored channels for analogue stations  
You can delete stations that have been stored more than once  
during the automatic search. You can also store stations in a  
different preset position, change or enter the name of a stations as  
well as skip channels.  
Deleting stations  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Preset list  
2
Select »Preset list« with »P+« or »P-« and press »OK« to con-  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
v
Ŋ
firm.  
v
Ŋ
v
– The »Preset list« menu appears.  
Ŋ
v
Ŋ
1 2 3 4 Favorite Selection  
Move  
3
4
Select the channel you wish to delete with »P+« or »P-«.  
z
F
Skip  
Delete  
F
Press » « (blue) to prepare the channel for deletion and press  
Ƿ
Ȅ
Lock  
Name  
i
Exit  
»OK« to delete.  
Sorting television stations  
1
In the »Preset list« menu, select the station to be moved by  
pressing »P+« or »P-«.  
Preset list  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
v
Ŋ
2
3
Highlight the channel with »OK«.  
v
Ŋ
v
Ŋ
v
Ŋ
Select a new station with »P+« or »P-« and then press »OK«  
to confirm.  
Move  
– All of the stations that follow move up one position.  
i
Exit  
Note:  
To sort the other television channels, repeat steps 1 to 3.  
Entering station names (maximum of 5 characters)  
1
2
3
In the »Preset list« menu, select the station with »P+« or »P-«.  
Preset list  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
Ƿ
Highlight the channel with » « (yellow).  
v
Ŋ
v
Ŋ
v
Ŋ
Select letters or numbers with »P+« or »P-«, move to the next  
v
Ŋ
position with » « or » « and repeat.  
Ǹ
Ƿ
Ƿ
4
Store the channel name with » « (yellow).  
Ƿ
Name  
i
Exit  
Note:  
To enter more station names, repeat steps 1 to 4.  
32  
 
SPECIAL SETTINGS  
______________________________  
Skipping television stations  
You can mark television stations to be skipped during selection with  
»P+« or »P-«. You can still select the station using the numerical  
buttons.  
Preset list  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
v
Ŋ
v
Ŋ
v
Ŋ
v
1
2
In the »Preset list« menu, select the station with »P+« or »P-«.  
Ŋ
1 2 3 4 Favorite Selection  
Move  
z
Highlight the channel with »  
« (red).  
z
F
Ƿ
Skip  
Delete  
– The station is now displayed on a red background.  
Ȅ
Lock  
Name  
i
Exit  
You can deselect the station by pressing the red button again.  
Parental lock (block channel positions)  
Preset list  
You can block channels which are unsuitable for children.  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
v
Ŋv  
1
2
Select the desired television channel with »P+« or »P-«.  
To block the channel, press » « (green).  
v
Ŋ
v
Ŋ
v
Ȅ
Ŋ
1 2 3 4 Favorite Selection  
Move  
– The blocked TV station is marked with a key.  
z
F
Ƿ
Skip  
Delete  
Notes:  
Ȅ
Lock  
Name  
i
Exit  
You can unlock the station by pressing the green button again.  
Creating a list of favourites  
You can select your favourite stations and save them in up to four  
lists.  
Preset list  
v
900 ARD  
901 ZDF  
902 RTL  
903 SAT1  
904 PRO7  
Ŋ
v
Ŋ Fav. 1  
v
Ŋ
1
Select the station with »P+« or »P-« and press »1« – »4« to  
enter it into lists of favourites 1 – 4.  
v
Ŋ
v
Ŋ
1 2 3 4 Favorite Selection  
Move  
To remove, press the corresponding number button again.  
You can enter the selected station in more than one favourite  
list.  
z
F
Ƿ
Skip  
Delete  
Ȅ
Lock  
Name  
i
Exit  
Finishing the settings  
1
Press »i« to finish the settings.  
33  
 
SPECIAL SETTINGS  
______________________________  
Tuning digital television stations  
This setting is only necessary if a new channel comes on air and you  
do not want to change the order of your channels. The television  
channel can be set directly or using the search.  
Tuning channels using the search  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
DVB Menu  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Manual Search  
Automatic Search  
Reset receiver  
Installation  
3
Select »Automatic Search« with »P+« or »P-« and press  
»OK« to confirm.  
Signal Information  
Select  
– The »Channel search - Digital« menu appears and the search  
begins. The automatic search may last several minutes  
depending on the number of television channels received.  
F
Back  
i
Exit  
– The search is finished when the message »Done« appears.  
– At the end of the search, new TV or radio stations are auto-  
matically added to the end of the station list.  
4
5
Press »Ȅ« (green) to quit the station search.  
– The »DVB Menu« appears.  
Press »i« to finish the setting.  
Tuning the television channels by entering the  
channel numbers  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
DVB Menu  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Manual Search  
Automatic Search  
Reset receiver  
Installation  
3
Select »Manual Search« using »P+« or »P-« and press »OK«  
to confirm.  
Signal Information  
The »Manual Search« menu appears.  
Select  
F
Back  
i
Exit  
34  
 
SPECIAL SETTINGS  
______________________________  
4
Press » « or » « to select the channel number and press  
»OK« to confirm.  
Ǹ
Ƿ
– The »Channel search - Digital« menu appears and the search  
begins.  
– The search is finished when the message »Done« appears.  
– At the end of the search, new TV or radio stations are  
automatically added to the end of the station list.  
5
6
Press »Ȅ« (green) to quit the station search.  
– The »DVB Menu« appears.  
Press »i« to finish the setting.  
Resetting the DVB receiver to its original state  
This function enables you to delete the station lists and all custom  
settings.  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
DVB Menu  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Manual Search  
Automatic Search  
Reset receiver  
Installation  
3
4
Select »Reset receiver« with »P-« or »P+« and press »OK« to  
confirm.  
Signal Information  
Select  
Use »0« – »9« to enter the password 1234 and confirm with  
»Ȅ«.  
F
Back  
i
Exit  
– The »DVB Menu« appears.  
5
Select »Automatic Search« with »P+« or »P-« and press  
»OK« to confirm.  
– The »Channel search - Digital« menu appears and the search  
begins. The automatic search may last several minutes  
depending on the number of television channels received.  
– The search is finished when the message »Done« appears.  
6
7
Press »Ȅ« (green) to quit the station search.  
– The »DVB Menu« appears.  
Press »i« to finish the setting.  
35  
 
_____________________________________  
INFORMATION  
Displaying digital station reception properties  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
DVB Menu  
2
Select »Channel settings« with »P+« or »P-« and press »OK«  
to confirm.  
– The »DVB Menu« appears.  
Manual Search  
Automatic Search  
Reset receiver  
Installation  
3
Select »Signal Information« with »P-« or »P+« and press  
»OK« to confirm.  
Signal Information  
Select  
Notes:  
F
The lower section of the menu shows the signal properties. The  
further the bar for »Quality« and »Signal Strength« extends to  
the right, the better the reception signal.  
Back  
i
Exit  
The signal level not only depends on the settings of your  
receiver unit, but also on the channel which is currently active.  
Remember this when aligning your antenna using the signal  
level display.  
4
Press »i« to quit the menu.  
36  
 
_____________________________________  
INFORMATION  
Technical data  
Mains voltage:  
230 V, 50/60 Hz  
Power consumption: In standby mode 4.5 W  
Switched on 115 W  
Sound output:  
2x25 Watts music  
Reception ranges:  
C01 ... C99, special channels S01 ... S41,  
frequency band 1 ... 4  
Channel positions: 100 analog, 899 digital and 5 AV  
Service information for dealers:  
The product complies with the following EU directives:  
73/23/EEC directive for electrical equipment to be used within  
defined voltage ranges. 89/336/EEC directive on electromagnetic  
compatibility.  
The television set complies with the following standards: EN 60065,  
EN 55013, EN 55020  
Environmental note  
This product has been made from high-quality parts and materials  
which can be re-used and recycled.  
Therefore, do not throw the product away with normal household  
waste at the end of its life. Take it to a collection point for recycling  
electrical and electronic devices. This is indicated by this symbol on  
the product, in the operating manual and on the packaging.  
Please find out about collection points operated by your local  
authority.  
Help protect the environment by recycling used products.  
37  
Subject to alteration and correction!  
 
_____________________________________  
INFORMATION  
Troubleshooting  
If the remedies given below do not work, please consult an authori-  
sed GRUNDIG dealer. Please bear in mind that malfunctions can  
also be caused by external devices such as video recorders or satel-  
lite receivers.  
Fault  
Possible cause  
Remedy  
Screen lit (snow), but no  
station  
Antenna cable  
Is the antenna cable  
connected?  
No television station pro-  
grammed  
Start the station search  
Poor picture contrast  
Picture settings incorrectly Adjust the brightness,  
set  
contrast or colour setting  
Test with another channel  
Problem at station  
Interference to picture  
and/or sound  
Interference from other  
devices  
Change the position of the  
device  
Ghosts, reflection  
Channel setting  
Automatic or manual chan-  
nel setting/fine tuning  
Antenna  
Have antenna cable or  
system checked  
No colour  
Colour intensity at minimum Turn up the colour  
TV standard setting (if Select the correct colour  
setting option is available) standard  
Problem at station  
Test with another channel  
Inappropriate colour,  
colour spots  
Strong magnetic field due, Move the loudspeakers  
for example, to loudspea- away from the television.  
kers  
If colour spots remain,  
switch off the television set  
at the mains and switch on  
again after 10 minutes  
Volume set to minimum  
Turn up or switch on the  
volume  
Picture but no sound  
Problem at station  
Test with another channel  
Test another channel for  
Television station (has no  
teletext) or antenna system fine tuning and ghosts  
Teletext missing or faulty  
Station signal too weak  
No optical connection  
Check the antenna system  
Point the remote control at  
the television set  
Remote control does not  
work  
Remote control batteries  
Check the batteries, change  
if necessary  
Operating condition unde- Switch off the television  
fined  
with the main power button  
for approximately  
2 minutes  
Parental lock has been  
activated  
Switch off the parental lock  
The picture is unrecognisa-  
ble after switching on the  
television  
38  
 
_____________________________________  
INFORMATION  
Additional Information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
39  
 
Grundig Multimedia B.V. • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam •  
 

Graham Field Mobility Aid CKD12F7T User Manual
Haier Washer Dryer HW60 1082 User Manual
Hamilton Beach Rice Cooker 37538N User Manual
HP Hewlett Packard Network Router HP 83236B PCS Interface User Manual
HP Hewlett Packard Personal Computer BL465C G7 User Manual
Humax DVR IRCI PVR User Manual
Hunter Fan Outdoor Ceiling Fan 21316 User Manual
Hunter Fan Thermostat 40080 User Manual
Husqvarna Cultivator TB1000 User Manual
Husqvarna Snow Blower 1130ST User Manual