Grizzly Outdoor Cart T10048 User Manual

MODEL T10048  
COLLET/TOOLING CART  
FOR NT40  
INSTRUCTIONS  
Introduction  
the Model t10048 is a specialized cart to keep  
your nt40 collets and tooling organized, pro-  
tected, and close at hand. the top and middle  
shelves hold a total of 48 collets with additional  
space for storing tooling on the lower and two end  
shelves. Collet holders are non-marring and can  
be marked for quick identificationideal for CnC  
machines. the heavy-duty rubber casters provide  
easy movement of the cart and can lock the cart  
in place.  
Figure 1. Model t10048 collet/tooling cart.  
Specifications  
number of Collet holders................................ 48  
overall dimensions ........39"L x 1814"W x 3478"h  
end shelf dimensions.................... 18"W x 934"L  
Weight .......................................................70 lbs.  
If you need help with your new item, call our Tech  
Support at: (570) 546-9663.  
This cart is designed to ONLy hold metal-  
working collets and tooling. DO NOT stand  
or sit on any part of this cart. DO NOT use or  
modify this cart for any other purpose than  
what it was designed for. Failure to heed  
these instructions could lead to serious per-  
sonal injury or property damage.  
Figure 2. example of use.  
Copyright © ApriL, 2008 By grizzLy industriAL, inC.  
WARNING: NO pORTION OF ThIS MANUAL MAy bE REpRODUCED IN ANy ShApE  
OR FORM WIThOUT ThE WRITTEN AppROvAL OF GRIzzLy INDUSTRIAL, INC.  
#ts10611 printed in ChinA  
 
3. slide the middle shelf onto the mounting  
flanges of the side panels and secure it in  
place with 12 hex bolts and lock nuts, as  
shown in Figure 7.  
5. Attach the side shelf supports to the side  
shelves with 8 hex bolts and lock nuts, as  
shown in Figure 9. Fully tighten these fasten-  
ers.  
Note: There are two possible mounting  
positions for the middle shelf, as shown in  
Figure 6.  
Note: Take special note of the orientation of  
the shelf and supports to one another.  
side panel  
Middle shelf  
side  
shelf  
supports  
Lower Mounting  
position  
Figure 9. side shelf supports installed.  
Figure 7. Middle shelf installed onto the side  
panels.  
6. Attach the side shelf assemblies to the side of  
the cart opposite the handle with 8 hex bolts  
and lock nuts, as shown in Figure 10. Fully  
tighten these fasteners.  
4. slide the top shelf over the top of the side  
panels, position the handle on one side, as  
shown in Figure 8, then secure the top shelf  
and handle in place with 12 hex bolts and  
lock nuts.  
Note: There are two possible mounting posi-  
tions for the bottom side shelf assembly.  
handle  
top shelf  
Figure 8. top shelf and handle installed.  
Figure 10. side shelf assemblies installed.  
-3-  
t10048 Collet/tooling Cart for nt40  
 
7. square up the sides of the cart with the top  
and middle shelves, then fully tighten all fas-  
teners.  
9. With assistance, tip the cart upright, then  
check for stability and use. if necessary,  
loosen fasteners, readjust the panels and  
shelves, then re-tighten the fasteners.  
8. With assistance, turn the cart upside down  
and install the casters with 16 hex bolts and  
lock nuts, as shown in Figure 11.  
Note: To better move the cart, we recom-  
mend installing the swivel casters on the  
same side as the handle.  
Fixed Casters  
swivel Casters  
Figure 11. Casters installed.  
-4-  
t10048 Collet/tooling Cart for nt40  
 

Graco Baby Accessories 1761213 User Manual
Greenway Home Products Beverage Dispenser GWD 4650W User Manual
Grizzly Grinder H8149 User Manual
Harbor Freight Tools Chipper 92281 User Manual
Harbor Freight Tools Impact Driver 95141 User Manual
Hotpoint Microwave Oven MWH211 User Manual
Hoya Oxygen Equipment OM 25A User Manual
HTC Cell Phone IRIS100 User Manual
Hunter Fan Humidifier 31004 User Manual
Husqvarna Lopper 327HDA65 User Manual