MODEL H8090
2 Ton
Mini Aluminum Jack
Specifications
Maximum Lifting Capacity ............................ 4000 lbs.
Lifting Range ............................................. 57⁄16"–137⁄8
Socket
"
Weight .............................................................. 21 lbs.
Identification
Figure 1 shows the main parts of the jack.
Pump Control
Knob
Carrying
Handle
Machine
Label
Pump Arm Notch
Figure 2. Pump control knob, pump arm notch and
pump arm socket.
Pump Arm
Saddle
Failure to follow these instructions could result
in serious personal injury or death:
1. ALWAYS support the vehicle with appropri-
ately rated support stands before using this
jack.
Figure 1. Model H8090 Identification.
2. Only use this jack on hard level surfaces
such as concrete or asphalt.
3. DO NOT overload this jack beyond the
maximum lifting capacity. Overloading can
cause the jack to collapse.
4. DO NOT use this jack to move a vehicle.
This jack is designed for lifting only.
5. Keep fingers and hands away from pinch
points when lowering
6. Always block vehicle wheels before using
this jack.
Operation
To raise the saddle:
Fit the pump arm notch over the pump con-
trol knob and turn the knob clockwise until it
stops, then put the pump arm into the socket
and move the arm up and down (Figure 2).
To lower the saddle:
Fit the pump arm over the control knob and
slowly turn the knob counterclockwise.
If you need help with the Model H8090, call our
Technical Support line at: (570) 546-9663.
COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JC8821 PRINTED IN CHINA
H8090 Hydraulic Pump Parts Breakdown
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
101 PH8090101 BASE
118 PH8090118 PUMP CYLINDER
119 PH8090119 RING
102 PH8090102 STEEL BALL
103 PH8090103 THICK BALL HEAD
120 PH8090120 THIN BALL HEAD
121 PH8090121 FILTRATE NET
122 PH8090122 OIL TANK RING
123 PH8090123 CYLINDER
124 PH8090124 O-RING
104 PH8090104 ADJUSTABLE COMPRESSOR SPRING
105 PH8090105 O-RING
106 PH8090106 OIL RESERVOIR SEAL BOLT
107 PH8090107 STEEL BALL
108 PH8090108 O-RING
125 PH8090125 BOWL STYLE RING
126 PH8090126 PISTON
109 PH8090109 RELEASE VALVE ROD ASSEMBLY
110 PH8090110 STEEL BALL
127 PH8090127 C-RING
111 PH8090111 RING
128 PH8090128 PISTON ROD
129 PH8090129 RECTANGLE RING
130 PH8090130 CAP SCREW
131 PH8090131 OIL TANK
112 PH8090112 PUMP
113 PH8090113 RETAINING RING
114 PH8090114 PUMP CORE - SMALL
115 PH8090115 RETAINING RING
116 PH8090116 PUMP CORE - BIG
117 PH8090117 O-RING
132 PH8090132 RECTANGLE RING
133 PH8090133 O-RING
134 PH8090134 TOP CAP
�����������������������������������������������������������������������
�������������������������������������
������������������������������������
�����������������
��������������������������������
���������������������������������
����
�����������������
����
������������������
|