Graco Inc Paint Sprayer 223390 User Manual

INSTRUCTIONS-PARTS LIST  
308–011  
This manual contains IMPORTANT  
INSTRUCTIONS and WARNINGS.  
READ AND RETAIN FOR REFERENCE.  
Rev A  
SPRAY GUN EXTENSION  
4050 psi (280 bar) MAXIMUM WORKING PRESSURE  
Model 223–390  
Model 223–391  
Model 223–392  
12 in. (305 mm) long  
18 in. (457 mm) long  
24 in. (610 mm) long  
Fits all Graco high pressure spray guns.  
(Adapters available for other guns)  
Includes DripLesst Tip Guard.  
Order spray tip separately.  
GUN NOT INCLUDED  
WARNING  
Pressure Relief Procedure  
T
3. Disengage the gun safety latch. Hold metal spray  
extension firmly to the side of a grounded metal  
pail, and trigger the gun to relieve pressure.  
o reduce the risk of serious bodily injury, including  
fluid injection, splashing fluid or solvent in the eyes or  
on the skin, or injury from moving parts or electric  
4. Engage the gun safety latch.  
shock, follow this procedure whenever you shut of  
f
5. Open the sprayers pressure drain valve, having a  
the sprayer, when checking or servicing any part of  
the spray system, when installing, cleaning or chang  
ing spray tips, and whenever you stop spraying.  
container ready to catch the drainage. Leave the  
valve open until you are ready to spray again.  
-
If you suspect that the spray tip or hose is com  
pletely clogged, or that pressure has not been fully  
relieved after following the steps above, VER  
SLOWLY loosen the tip retainer nut or hose end cou  
-
1. Engage the gun safety latch.  
Y
-
2. Shut off the pump and unplug it (or disconnect the  
spark plug).  
pling to relieve pressure gradually, then loosen com  
pletely. Now clear the tip or hose.  
-
WARNING  
Hazard of Using Fluids Containing Halogenated Hydrocarbons  
Never use 1,1, 1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids con  
taining such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibil  
-
-
ity of explosion, which could cause death, serious bodily injury and/or substantial property damage.  
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441  
ECOPYRIGHT 1990, GRACO INC.  
 

Graco Baby Swing 1750230 User Manual
Graco Microscope Magnifier 333282B User Manual
Grizzly Automobile Parts h6236 User Manual
HANNspree Flat Panel Television HANNSjoy28 TV User Manual
Heatiator Indoor Fireplace FP28 User Manual
Hotpoint Oven OS 897D C HP User Manual
Hotpoint Refrigerator CTX19MACAA User Manual
HP Hewlett Packard Computer Drive Ultrium Drive User Manual
HP Hewlett Packard Switch 377707 002 User Manual
IBM Personal Computer 6223 User Manual