Gigabyte Computer Drive GC RAMDISK User Manual

i-RAM (GC-RAMDISK)  
User's Manual  
Rev. 103  
12MD-RAMDISK-103R  
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste  
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!  
* The WEEE marking applies only in European Union's member states.  
Copyright  
© 2005 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.  
The trademarks mentioned in the manual are legally registered to their respective companies.  
Notice  
The written content provided with this product is the property of Gigabyte.  
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any  
means without Gigabyte's prior written permission. Specifications and features are subject to change  
without prior notice.  
 
Thank you for selecting GIGABYTE's latest i-RAM product. This user's manual gives  
information about i-RAM features and specifications, and will lead you through the installation of i-  
RAM in your system. Read this guide and related precautions before installing i-RAM.  
Table of Contents  
1. Product Features ....................................................................................................... 4  
2. Product Specifications ................................................................................................. 4  
3. System Requirements ................................................................................................. 5  
4. Board Layout ............................................................................................................. 5  
5. Precautions ................................................................................................................ 6  
6. Installation Directions .................................................................................................. 7  
7. Appendix ................................................................................................................... 8  
- 3 -  
 
z Fastest System Boot-Up speed--Fully SATA1.0a compliant; i-RAM can be used as a boot  
device.  
z Fastest Solid State Disk--Dedicated DDR design, Supports DDR 266/333/400 memory modules.  
z Fastest DataAccess--Ideally design for applications that require massive storage data access,  
like Audio/Video Capture & Edit, 3D Graphics designs, File sharing, Database exchange,  
Server, Workstation and Web/Email servers etc.  
z Data Protection  
-- After PC shutdown, the stored data can be protected by using PC standby power.  
--When AC wall power is off or after unplug power cord; the stored data can be protected by  
using i-RAM backup battery(Note 1). This is good for user/engineer to do some needful actions (e.g.  
move i-RAM alone or with PC in the short distance/period and backup i-RAM data) before AC  
wall power resume or re-plug in power cord.  
z No additional drivers required.  
z Supports Backup and Restore software utilities.  
z Noiseless solution compared to traditional hard drives.  
z Vibration proof compared to traditional hard drives.  
z PCI 2.2 Mechanical Compliant:  
-
-
Get working power from PCI slot  
Suitable for PC and Server systems  
z SATAInterface  
-
-
-
SATA1.0a Compliant  
Supports one SATAconnector  
Up to 150MB/s data transfer rate  
z Memory Interface  
-
-
-
-
Max amount of memory supported is 4GB  
Four 184-Pin/2.5V DDR DIMM sockets  
Supports DDR 266/333/400(Note 2)  
Supports DIMM up to 4.2mm thickness (including heat-sink)  
z Backup Battery  
One 1,600mAh lithium battery  
-
(Note 1): Actual battery life may vary based on usage and different memory modules.  
(Note 2): Please refer to the recommended memory support list on Page 8.  
- 4 -  
 
z One available PCI 2.2 compliant slot  
z One available SATA(1.5Gb/s) compliant connector  
z Systems based on Intel ICH6/ICH7 series, VIA 8237 series, SiS 964, or ULi M1689 South  
Bridge.  
Main Chip  
SATA Interface  
LEDs  
Memory  
Sockets  
Battery  
Battery Capacity  
Indicator Button  
(Optional)  
4-Level LED  
Battery Capacity  
Indicator (Optional)  
PCI Connector  
- 5 -  
 
General Precautions:  
The memory size available will be less than the total size of the installed memory.  
When the system is set to RAID mode, the RAID controller might occupy some disk space as  
buffer. For example, when the ICH7R RAID controller is set to RAID 0 or RAID 1, the total hard  
drive capacity will be 512MB~1GB less than the actual capacity.  
For users who wish to install operating system in i-RAM, please prepare the minimum free hard  
disk space for the operating system.  
To protect data integrity and extend battery lifespan, it is not recommended that you unplug the  
AC power cord of the power supply.  
Important Battery Information:  
Please do not remove the battery. If the battery appears to be damaged or does not function  
properly, please contact the place of purchase for further checking.  
i-RAM memory sockets are powered on after the battery is charged, please handle with care to  
prevent short circuit and damage.  
Do not dispose of the battery in fire. To avoid injuries or causing fire hazard, please do not  
disassemble or touch battery terminals with metal objects or your fingers.  
The 4-level LED battery capacity indicator located in the lower left corner of the i-RAM shows  
about how much charge is left. The more the LEDs light up, the more power remain in the  
battery. Press and hold the red battery capacity indicator button to show the battery charge level  
(Optional).  
Data Loss Preventions:  
To prevent data from being lost or damaged, read the following guidelines:  
Do not remove i-RAM from the PCI slot or remove the AC power from the power supply for too  
long.  
Do not remove the installed memory module(s) from i-RAM.  
Do not remove i-RAM from the PCI slot and also detach the battery.  
Please back up the data in i-RAM regularly using either GIGABYTE's backup tool (please  
utilities. Please note that data in i-RAM is not covered under the warranty.  
- 6 -  
 
Please read the following installation directions before using i-RAM:  
Step 1: Install Memory Module(s)  
Place i-RAM card on an anti-static pad. The DIMM socket  
has a notch, so the memory module can only fit in one  
direction. Push the clips at either end of the DIMM socket  
outwards to the open position. Insert the memory module into  
the DIMM socket. Then push it down until the retaining clips  
snap into place (Figure 1).  
Figure 1  
We recommend slotting memory modules from the top socket.  
To remove the memory module, support the memory module with your  
fingers while spreading the clips. This prevents the memory module from  
being damaged when it pops out.  
Step 2: Install i-RAM  
Select a free PCI slot and remove the screw and slot bracket.  
Press the i-RAM card firmly into the slot and replace the  
screw to secure the slot bracket of the i-RAM card. (Figure 2)  
Step 3: Connect SATA Cable  
Figure 2  
Attach one end of the SATA interface cable to the SATA  
connector on the i-RAM card (Figure 3). Locate an available  
SATA connector on your motherboard and plug the other end  
of the SATA interface cable into the SATA connector.  
Figure 3  
Step 4: Configure System BIOS  
At system startup, enter system BIOS when prompted. Read the motherboard or system  
documentation and assure that the motherboard SATA port connecting to i-RAM is enabled.  
Finally, make sure i-RAM has been detected as a normal hard drive by system BIOS.  
Step 5: Format i-RAM  
In order for i-RAM to be visible in your operating system, it must be formatted. You can format  
i-RAM using FDISK, Windows Disk Management or other third-party tools.  
You are now ready to use i-RAM as a normal hard drive.  
LEDs Information:  
The LEDs in the top right of the battery holder provide the following information:  
LED  
Color Description  
LED  
Color Description  
PHY_READY Blue  
i-RAM is correctly detected  
FULL  
FAULT  
Green The battery is at full charge  
HD_LED  
Blue  
i-RAM is writing or reading data  
Red  
Battery malfunctions  
3VDUAL  
Yellow i-RAM is powered by motherboard  
Yellow The battery is being charged  
CHARGING  
- 7 -  
 
Recommended Memory Support List  
Please refer to the memory support list below:  
DDR400 (256MB)  
Module P/N.  
Module Supplier Comp. Used  
Component P/N.  
K4H560838E-TCCC  
(ECC)  
Samsung  
Samsung  
KOREA 0309 PC3200U-30331-A1  
M381L3223ETM-CCC 256MB  
DDR PC3200 CL3 ECC  
Micron  
Buffalo  
Micron  
Buffalo  
MT16VDDT3264AG-40BB5  
MT 46V16M8-5B  
MT 46V32M8-5BC  
PC3200U-30330-B1 256MBDDR400CL3  
DD4333-S256/MCPC3200U-30330-A1  
256MB 400Mhz-CL3  
DDR400 (512MB)  
Module P/N.  
Module Supplier Comp. Used  
Component P/N.  
V58C2256804SAT5B  
Transcend  
Mosel  
512M184DDR=HP  
512MDDR400DIMM3-3-3  
8144 Y0347  
Elixir  
Elixir  
M2U51264DS8HC1G-5T 512MB  
DDR400 CL3PC3200U-30330  
512M DDR400ULTRA(32M8)  
V826664K24SCIW-D3  
512MDDR400  
ELIXIRN2DS25680CT-5T  
Geil  
Geil  
MPEA3200C2UD2-512  
0512PP V58C2256804SC15  
PSD A256D30BTP 513ASN14  
TAIWANAN-5  
ProMOS  
Transcend  
Mosel  
PSC  
DIMM2.5-3-3  
DDR400 (1GB)  
Module P/N.  
1G184PDDR=LR 1GDDR400  
DIMM3-3-3  
Module Supplier Comp. Used  
Component P/N.  
MT 46V64M8-5B C  
Transcend  
Micron  
Kingston  
Samsung  
KVR400X64C3A/1G  
K4H510838C-UCCC  
Note: For the latest memory support list information, please visit GIGABYTE's website at  
- 8 -  
 

Edelbrock Automobile Parts R09201 User Manual
Exmark Lawn Mower 4500 355 User Manual
Extron electronic Stereo Amplifier RGB 580XI User Manual
First Alert Home Security System 2074EF User Manual
Fisher Price Baby Gym P5333 User Manual
Fluke Portable Generator PM5414V User Manual
Friedrich Air Conditioner EQ08M11 User Manual
Frigidaire Dishwasher 740 Series User Manual
Fujitsu Network Card ADA 16FX User Manual
Garland Microwave Oven EM C180 User Manual