GE High-Efficiency Washer Quick Reference
Guide
Congratulations on the purchase of your new GE high-efficiency washer!
This HE washer has the new HydroWave™ system with Infusor™ wash technology. This system provides
excellent performance while using less water and energy than a conventional washer. You will notice some
differences during operation. Below is a list of quick tips to better understand your unit during normal
operation.
Topics
Water level seems low, Not
enough water
Comments
Reasons
This is normal
During the wash cycle water may not entirely cover the top
of clothes. Infusor™ wash technology is at work and will
provide excellent cleaning.
Small Load
Large Load
Super Load
Use High Efficiency detergent
The use of HE detergent will optimize wash performance
and prevent over sudsing.
Detergent
Always use dispenser located on the Using the dispenser will ensure optimal distribution of
Fabric Softener
top of the Infusor™ when
using Fabric Softener.
fabric softener and avoid spotting on garments.
2. Measure Fabric
4. Turn OPTIONS Knob on
3. Close Infusor™ Lid
1. Lift Infusor™
Softener and Pour
control panel to FABRIC
SOFTENER setting
Lid
Washer will not fill with water when Unit will not operate with lid open during "PreciseFill".
“PreciseFill” Load Size
Option
lid is open
This is for your safety ‐ basket spins to aid in load sensing
– also allows option to perform properly.
This is normal
HydroWave™ system is very quiet during portions of the
wash cycle. This action allows for optimal wash
performance.
Seems too quiet
Pauses
This is normal
This is normal
At the beginning of the Cycle (with lid open or closed) the
smart drive system is sensing the load; as a result, there
will not be any noise.
The machine uses a (no gear) direct drive system. This is
the sound of the motor rotating back and forth to agitate
your laundry.
“Swoosh” or “zip” sound
175D6444P001
|