GE Monogram Ventilation Hood ZV800SJ User Manual

ZV800SJ/BJ – GE Monogram
36" Chimney Hood  
Dimensions and Specifications (in inches)  
Note:
The vent hood canopy extends forward 5-7/8".  
The vent hood must be installed 24" min., and 30" max. above  
the cooking surface. The telescopic duct cover conceals the  
ductwork running from the top of the hood to the ceiling. The  
duct cover is sized to reach 8 ft. to 10 ft. ceiling heights.  
*Height to  
Ceiling  
The hood installation height, from the cooking surface to the  
bottom of the hood, depends upon ceiling height.  
1-1/2"  
Installation Information:
Before installing, consult installation  
instructions packed with product, or available online at  
monogram.com, for current dimensional data.  
12-15/16" at sides  
35-7/8"  
13-11/16" at center  
*The Supplied Duct Cover Fits  
8 ft. to 10 ft. Ceiling Heights  
Listed by  
Underwriters  
Laboratories  
R
For answers to your Monogram,® GE Profile
or  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
Specification Created 8/04  
130664  
 
ZV800SJ/BJ – GE Monogram
36" Chimney Hood  
Cabinet Requirements  
This hood may be installed beneath a wall-mounted cabinet.  
Ductwork, Wiring  
• Determine the exact location of the vent hood.  
• Both vented and recirculating operation can be accomplished in an  
under-cabinet installation.  
• If the cabinet has been installed, it must be removed so that wall  
framing supports can be added.  
• Locate the Rear Wall Template packed with the literature.  
• Measure 36" from the floor to the top of the cooking surface. Add  
the pre-determined hood installation height. Mark that location.  
• Use a level to draw a straight pencil line on the wall.  
3-3/4” centerline  
to wall  
20” Min.  
Ceiling  
24” Min.  
*
30” Max.  
The cabinet must be at least 20" high between the bottom frame and  
the inside top. A custom cabinet or modifications to a different size  
cabinet may be required to accommodate the hood housing.  
• The cabinet must be 36" wide.  
• The cabinet must be firmly secured to wall studs or the added  
framing support and capable of supporting 100 pounds.  
Drill 1/8"  
Drill 1/8"  
Pilot Holes  
Pilot Holes  
Drill 1/8"  
Pilot Holes  
Drill 1/8"  
Pilot Holes  
5-1/16"  
9-5/8"  
13-3/4"  
119-1/2”  
C
12-3/4"  
L
REAR WALL TEMPLATE  
Drill 1/8"  
Drill 1/8"  
Pilot Holes  
Pilot Holes  
11”  
ALIGN BOTTOM EDGE WITH  
PENCIL LINE INDICATING  
BOTTOM OF THE HOOD.  
8-1/8"  
2-1/16"  
49-80271 JR 07-04  
• Tape the template in position along the penciled line. Check to be  
sure the template is level.  
• Use the level to draw a line straight up, from the centerline on the  
template to the ceiling.  
-4
11-3/4”  
• Measure 3-3/34" from the back wall to the centerline of a 6-1/2"  
hole on the ceiling.  
NOTE: If drywall is not present, add drywall thickness to the  
3-3/4" dimension.  
Listed by  
Underwriters  
Laboratories  
R
House Wiring Location:  
For answers to your Monogram,® GE Profile
or  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
• The junction box is located on the top right side of the hood.  
• Wiring should enter the back wall 20" to 26" above the bottom of  
the hood, and within 4" of the right side of the centerline. Wiring  
should enter at least 4" above the bracket on the right side.  
Specification Created 8/04  
130664  
 
ZV800SJ/BJ – GE Monogram
36" Chimney Hood  
Features and Benefits  
• Under-cabinet or stand-alone installation – The chimney  
hood installs beneath a cabinet, above most cooktops  
and ranges. For a more contemporary look, the system  
can be wall-mounted with matching 8-to-10-ft. duct cover.  
• Low-profile design. High-impact style – The retractable  
glass canopy is sleekly styled with a streamlined design,  
seamlessly finished edges and front-mounted touch  
controls.  
• Powerful ventilation – A four-speed, 500-CFM fan blower  
with boost option captures the smoke and steam produced  
by high-performance cooking equipment.  
• Multilevel halogen lighting – Six levels of intensity, from  
accent to ambient settings, allow you to choose the lighting  
to match the cooking task or occasion.  
• Easy maintenance – Stainless steel filters can be easily  
removed for safe cleaning in your dishwasher.  
• Recirculating kit – Included for applications that do not  
allow outside venting.  
• Model ZV800SJSS – Stainless steel  
• Model ZV800BJBB – Black on black  
Specification Created 8/04  
130664  
 

Eagle Electronics SONAR 966 0087 01 User Manual
Earthquake Sound Speaker SWS 10X 4 OHM User Manual
Eizo Computer Monitor FDU2602W User Manual
Eizo Computer Monitor L375 User Manual
Euro Pro Lawn Sweeper V1730H User Manual
Fostex Speaker FW168HP X User Manual
Friedrich Air Conditioner CP06F10 User Manual
Frigidaire Cooktop FGEC3065K User Manual
Frigidaire Dishwasher Dishwasher Tower Wash System User Manual
Furman Sound Power Supply SPR 20i User Manual