MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR12 SERIES
■ FEATURES
● Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP
Up to 50% less volume and board area than previous
generation telecom relay.
● Slim type for high density mounting
● Conforms to Bellcore TR-NWT-001089 and FCC Part 68
requirements
● UL recognized and CSA certified
● Low power consumption
● Conforms to IEC 950 (W type only)
– 2.5 mm clearance and creepage between coiand contcts
–5000 V surge strength between coil and contacts (2x10s
surge wave)
–2000 Vrms dielectric strength between coil and contacts
–UL 150 and IEC950 (approval in proc
■ ORDERINNFMATION
–** (–CSA
FBR12 N
D
12 –P
[ample]
(a) (b) (c) (d) (e) (f) (g)
(b)
eries Name
FBR12 : FBR12 Series
N
: Standard (plastic sealed tye
: High dielectric strength typplastic sealed type)
High sensitivity type
Enclosure oil Power
W
H
(c)
(d)
Coil Type
D
: DC co
Nominal Voltage
Refer to the COL DTA CHART
Nil
: Gold-overlay silvr-nickel
(e)
(f)
Contact Material
Custom Designation
CSA Standard
: Gold-overlay siler-palladum
asgned custom specificaon
–CSA : UL14 + CSA recognized
–CSA : 1950 CSA (under application)
(g)
Note: The designation name is stamped on the top of the relay ase afollows:
(Example) Designation ordered: FBR12ND05
Stamp: 12ND05
■ SAFETY STANDARD AND FILE NUMBERS
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
Nominal coil voltage
Contact rating
0.5 A 125 VDC resistive
3 to 24 VDC
2
A 30 VDC resistive
0.3 A 110 VAC resistive
1
FBR12 SERIES
■ SPECIFICATIONS
Item
High Sensitive Type
Standard (Gold-overlay silver-nickel)
2 form C (DPDT)
-P type (Gold-overlay silver-palladium)
Contact
Arrangement
Material
Gold-overlay silver-nickel
Bifurcated
Gold-overlay silver-palladium
Style
Resistance (initial)
Rating (resistive)
Maximum Carrying Current
Maximum Switching Power
Max. Switching Voltage*1
Maximum 100 mΩ (at 0.1 A 6 VDC)
0.3 A 125 VAC or 1 A 30 VDC
2 A (at 20°C)
62.5 VA or 30 W
250 VAC or 220 VDC
Maximum Switching Current 2 A
Minimum Switching Load*2
10m VDC - 10µ A
Capacitance
(at 10 kHz)
Approximately 1.0 pF (between open contacts, adjacent contacts )
Approximately1.0 pF (between coil and contacts)
Coil
Nominal power (at 20°C)
Operate power (at 20°C)
Operating Temperature
Operating Humidity
Approximately 50mW
Approximately 40m W
–40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)
45 to 85%RH
Time Value Operate (at nominal voltage) Maximum 5 msec.
Release (at nominal voltage) Maximum 5 msec.
Insulation
Resistance (initial)
Minimum 1000 MΩ (at 500 VDC)
Dielectric between open contacts
750 VAC
1 minute
Strength
adjacent contacts
between coil and contacts
1,500 VAC 1 minutes
Surge
Strength contacts,
adjacent contacts
between open
1,500 V
10 × 700 µs
between coil and contacts 2,500 V
2 × 10 µs
Life
Mechanical
1 x 108 operations minimum
Electrical
(at contact rating)
DC
AC
2 × 105 operations minimum
1 × 105 operations minimum
5 × 105 operations minimum
200 × 103 operations minimum
Other
Vibration
Resistance
Misoperation
Endurance
Misoperation
Endurance
10 to 55 Hz (double amplitude of 3.3` mm)
10 to 55 Hz (double amplitude of 5.0 mm)
1
Shock
Resistance
500 m/s2 (11± ms)
1
1,000 m/s2 ( 6 ± ms)
Weight
Approx. 1.9 g
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
The minimum switching load varies with the switching frequency and operation environment.
3
FBR12 SERIES
■ COIL DATA CHART
1.STANDARD
Nominal
current
MODEL
Coil
Must
Must
Coil
temperature
rise
Nominal
voltage
Nominal
power
Operate
power
resistance (at nominal
operate
operate
(
±10%)
voltage)
approx.
voltage*1
voltage*1
Standard
-P type
FBR12ND03 FBR12ND03-P
3 VDC
64.3 Ω
145 Ω
178 Ω
257 Ω
579 Ω
46 mA
31 mA
FBR12ND04 FBR12ND04-P 4.5 VDC
FBR12ND05 FBR12ND05-P
FBR12ND06 FBR12ND06-P
FBR12ND09 FBR12ND09-P
5 VDC
6 VDC
9 VDC
28 mA 75% max. 10% min. Approx.
Approx.
0.08 W
Max.
Approx.
0.14 W
20 deg
of nominal of nominal
23 mA
15 mA
11 mA
8 mA
(at nominal
voltage)
Max.
voltage
voltage
(at nominal
voltage)
FBR12ND12 FBR12ND12-P 12 VDC 1,028 Ω
FBR12ND24 FBR12ND24-P 24 VDC 2,880 Ω
0.2 W
0.112 W
30 deg
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
2.HIGH DIELECTRIC STRENGTH
Nominal
current
MODEL
Coil
Must
Must
Coil
temperature
rise
Nominal
voltage
Nominal
power
Operate
power
resistance (at nominal
operate
release
(
±10%)
voltage)
approx.
voltage*1
voltage*1
Standard
-P type
FBR12WD03 FBR12WD03-P
3 VDC
39 Ω
88 Ω
77 mA
51 mA
FBR12WD04 FBR12WD04-P 4.5 VDC
FBR12WD05 FBR12WD05-P
FBR12WD06 FBR12WD06-P
FBR12WD09 FBR12WD09-P
5 VDC
6 VDC
9 VDC
108 Ω
156 Ω
352 Ω
626 Ω
46 mA 75% max. 10% min. Approx.
Approx.
0.13 W
Max.
Approx.
0.23 W
30 deg
(at nominal
voltage)
of nominal of nominal
38 mA
25 mA
19 mA
10 mA
(at nominal
voltage)
voltage
voltage
FBR12WD12 FBR12WD12-P 12 VDC
FBR12WD24 FBR12WD24-P 24 VDC 2,304 Ω
0.25 W
0.14 W
33 deg
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
3. HIGH SENSITIVITY TYPE
MODEL
Coil
resistance
10%)
Must
Must
Coil
temperature
rise
Nominal
voltage
Nominal
power
Operate
power
operate
release
(
±
voltage*1
voltage*1
Standard
-P type
FBR12HD03 FBR12HD03-P
FBR12HD04 FBR12HD04-P
FBR12HD05 FBR12HD05-P
FBR12HD06 FBR12HD06-P
FBR12HD09 FBR12HD09-P
FBR12HD12 FBR12HD12-P
3 VDC
4.5 VDC
5 VDC
180 Ω
405 Ω
500 Ω
80% max. 10% min. Approx.
Approx.
0.04 W
Max.
Approx.
4 deg
(at nominal
voltage)
0.05 W
of nominal of nominal
6 VDC
720 Ω
(at nominal
voltage
voltage
voltage)
9 VDC
1,620 Ω
2,880 Ω
12 VDC
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
4
FBR12 SERIES
■ CHARACTERISTIC DATA
Range of operation temperature and voltage
Maximum switching capacity
Life curve
(×104)
Maximum
(DATA) assumes that
➀AC resistive load
500
the maximum allow-
able temperature of
(
AC contact rating)
160
➁DC resistive load
2.0
1.0
0.5
(
DC contact rating)
150
140
130
120
110
100
90
E type insulation
coil is 115˚C
30 V DC resistive load
(–P)TYPE
100
50
➁
➀
Operating voltage range
125 V AC
resistive load
10
5
0.3
0.2
(–P)TYPE
80
0.1
1
Must operate voltage
70
–10
0
10 20 30 40 50 60 70 80
0.5
1.0
1.5
2.0
10
20 30
50
125 200
Contact load current (A)
Contact load voltage (V)
Operating temperature (˚C)
■ REFERENCE DATA
Distribution of operate and release voltage
Distribution of operate and release time
Distribution of contact resistance
100
80
60
Operate
Operate
Release
Release
50
80
60
60
40
20
0
40
30
40
20
0
20
10
0
0
10 20
30 40 50 60 70 80
0
1
2
3
4
5
6
7
8
0
10 20
30 40 50 60 70 80
Contact resistance (mΩ)
Rated coil voltage multiplying factor (%)
Time (ms)
■ DIMENSIONS
●Dimensions
●Schematics
●PC board mounting hole layout
(BOTTOM VIEW)
(BOTTOM VIEW)
7.2+0.3
14.6+0.4
1
3 4 5
12
10 9 8
5.08
0.25
(0.95)
0.50
8–ø1.00
(1.06)
5.08
2.54
2.54
●Tube carrier
500±2
10.6 Max.
Unit: mm
30 pcs/Tube
5
FBR12 SERIES
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Netherlands
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Fax: (31-23) 5560950
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (1-408) 745-4970
Fax: (65) 273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 07/26/2004.
6
|