Fujitsu Server RXI300 User Manual

PRIMERGY RXI300  
System configurator and order-information guide  
February 2008  
Contents  
Instructions  
Configuration diagram  
Configurator  
0
I
Software Configurator  
Basic unit  
II Processor  
III Memory  
IV Hard disk drives  
V
SCSI / Fibre Channel Controller  
VI Disk Array  
VII Communication / Network  
VIII System Management Products  
IX Country specific power cord  
Change Report  
PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300  
Status 2008-01-29  
Configuration diagram PRIMERGY RXI300  
TOP View  
Basic unit ( I )  
Memory ( III )  
Extension slots  
Disk Array / Fibre Channel ( V )  
Communication/Network ( VI )  
Processor ( II )  
Itanium2  
# 1  
Itanium2  
# 2  
PCI Riser with 3 slots  
PCI-X 64-Bit / 100MHz, 3.3V, long  
PCI-X 64-Bit / 100MHz, 3.3V, long  
PCI-X 64-Bit / 133MHz, 3.3V, long  
1
1
0
1
2
3
FRONT VIEW  
Hard disk drives, hot-plug ( IV )  
Accessible drives  
5,25"x 0,5"DVD-ROM  
Operating Panel  
3.5"x1"  
3.5"x1"  
SCSI-ID 0  
SCSI-ID 1  
Power supply  
3. PSU  
2. PSU  
1. PSU  
Key:  
Included in basic unit  
Option  
Fujitsu Siemens Computers  
Enterprise Products PRIMERGY Server  
3 of 10  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
Start "PRIMERGY RXI300"  
SW Configurator  
with OEM-Software  
for PRIMERGY Server  
For all SW products please refer to the corresponding software configurator accessible via  
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.  
Microsoft - Software: W **)  
Linux - Software: **)  
- Windows Server 2003 R2,  
Enterprise x64 Edition  
- Additional loose  
- SuSE Linux ES (OEM): LO  
- SuSE Linux ES (Support): LS  
- Red Hat EL (OEM): LO  
Client-Access-Lizenzen (CALs)  
- Red Hat EL (Support): LS  
**) Pay attention to release and order information in PRINCE -> Operating System  
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:  
for partners:  
Continue with PRIMERGY  
HW configurator  
Fujitsu Siemens Computers  
4 of 10  
Enterprise Products - PRIMERGY Server  
 
System Configurator and Order-Information Guide  
Start PRIMERGY RXI300  
PRIMERGY RXI300  
Status 2008-01-29  
Section  
Basic unit  
I
PRIMERGY RXI300  
Basic Unit including:  
2U Chassis with  
Rack unit 2U  
- 3 bays for 350W hot-plug power supply moduls,  
2 hot plug moduls installed, 3rd modul req. for redundancy  
(PSU redundancy restricted to 240V operation),  
2 sep. AC inlets  
Basic unit with:  
- 1x Itanium 2 processor (max 2)  
- 2xSCSI HD drive bays with hot swap backplane  
- Fan unit with 6x60mm hot swap, variable speed fans  
- I/O Riser board with 3 PCI-X slots  
2xPCI-X long with 100MHz  
4 GB main memory  
1.6GHz / 3MB TLC  
(Madison)  
S26361-K963-V210  
S26361-K963-V944  
9015 (1.4GHz/12MB TLC) (Montecito)  
1xPCI-X long with 133MHz  
- 1x IDE CDROM/DVD-ROM Combodrive  
- Front panel board and front bezel  
* Rack- mounting kit (sliding rail´s)  
- telescopic rails kit  
- cable management arm  
* Systemboard with  
- 2 Itanium CPU sockets  
S26113-F602-E350  
one CPU installed according to the configurator  
thermal blank in other socket if 2nd CPU not installed  
- 2 memory banks with 4 DIMM memory slots each  
for up to 16GB PC2100 registered DDR RAM with ECC  
one bank installed according to the configurator  
3rd power supply module (PSU)  
for 2+1 redundancy (350W)  
max. 1x per system  
- onboard dual channel Ultra 320 SCSI  
first ch.for int. Drives (SCSI backplane), RAID 1 support  
second ch. for ext. SCSI devices  
- dual port LAN-Controller 10/100/1000TX  
- VGA Controller (8MB RAM) on-board (ATI Rage XL)  
- External Interfaces:  
PRIMERGY PRIMECENTER- Rack  
1x RS-232 (serial, RJ45 connector) in back  
2x VGA ports, 1 in front, 1 in back  
"Rack-mounting ex factory"  
This service is to be ordered once  
per installable server/storage  
subsystem, in order to get the  
server/storage subsystem  
4x USB 1.1, 2 in front, 2 in back  
2x LAN 10/100/1000 (RJ45) in back  
1xVHDCI SCSI connector  
SNP:SY-F1647E301-P  
Installation ex works for one  
server or subsystem.  
no PS/2 connection for KB / Mouse  
(USB connectivity must be used instead)  
IA64 Server Support CD, User Manual  
Hereby the rack will be delivered  
completely pre-mounted and  
all wired connections are tested.  
With racks 12U, 24U, 38U:  
Systems and components  
will be delivered installed in the rack  
With racks 46U:  
mounted into the PRIMERGY racks.  
In case of the 46 U PRIMERGY rack,  
this service has to be ordered,  
to get the mounting kits and the  
cables installed  
ServerView:  
FSC IA64 Server Support CD  
for EFI service partition  
Systems and components  
will be delivered separately  
To be ordered only together with  
a PRIMERGY-  
Mounting kit for PRIMERGY RXI300 is part of the basic unit  
- 1 pair of telescopic rails (647 - 810mm)  
PRIMECENTER rack  
e.g.:  
- 1 bracket DC-PC-Rack  
S26361-K826-V10x  
- 1 cable management for DC-PC-racks  
refer configurator PC-Rack  
max. 1x per System  
Mounting kit for mounting of servers in in FSC 19" DataCenter- and  
PRIMECENTER- racks and all server racks conforming to EIA standard  
EIA-310-D for 19" racks.  
Therefore the mounting kit is variable in depth from 647 - 810mm  
- Connetion for KVM switch / Rack console  
- RC22 can be directly connected (both USB and PS/2 connections)  
- KVM S2 series needs the KVM S2 adapter USB-VGA  
- For PS/2 KVM "S1" series as well as for standard PS/2 KB / Mouse  
an additional USB to PS/2 adapter must be bought additionally and  
connected to the RXI600. The adapter offers 2 x PS/2 ports.  
Adaper order number, to purchase via PRIMEPOWER, is  
D:GP70P-KA01 Adapter for PS/2<->USB  
- Appropriate FSC USB keyboard is S26381-K340-V1*  
This keyboard also needs USB cable T26139-Y3812-V1  
A
Fujitsu Siemens Computers  
5 of 10  
Enterprise Products PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
A
Section  
Processor  
II  
A two-way-processor system requires a multi-processor operating system.  
Later upgrading to a two-way-processor system is also possible.  
For a CPU extension the further CPUs must be of identical TLC (third level cache) and clock rate.  
S26361-F3071-E263  
S26361-F3071-E412  
Itanium 2 1.6 GHz  
Itanium 2 9015 1.4GHz  
with 12 MB TLC on Chip,  
heat sink and "Easy retention"  
with 3 MB TLC on Chip,  
heat sink and "Easy retention"  
(Intel Codename "Fanwood")  
occupies 2nd CPU socket  
max. 1x per system  
up to  
1x  
occupies 2nd CPU socket  
max. 1x per system  
Section  
Memory  
III  
There are 8 memory slots available (2 banks, 4 modules each).  
They can optionally be equipped with 1GB or 2GB registered DDR-RAM modules (PC2100).  
The maximal extension is 16GB with 2GB modules!  
Any mix of modules within one memory bank is not allowed.  
One memory bank is allready occupied  
S26361-F3070-E400  
S26361-F3070-E800  
Main memory 4 GB  
Main memory 8 GB  
PC2100 registered DDR RAM  
PC2100 registered DDR RAM  
up to  
1x  
consisting of 4 modules  
with 1 GB each  
consisting of 4 modules  
with 2 GB each  
occupies one bank  
max. 1x per system  
occupies one bank  
max. 1x per system  
Section  
Hard disk drives  
IV  
S26361-F3066-E173  
S26361-F3066-E114  
Hard disk 73GB / 10K  
Hard disk 146GB / 10K  
10000rpm,<5.5ms, min. 8MB Cache  
Ultra 320 SCSI (320MB/s)  
Interface: Wide SCA (80-pin)  
hot plug/hot replace tray  
occupies one 1" bay  
10000rpm,<5.5ms, min. 8MB Cache  
Ultra 320 SCSI (320MB/s)  
Interface: Wide SCA (80-pin)  
hot plug/hot replace tray  
occupies one 1" bay  
onb. SCCI or RAID Controller  
max. 2x per system  
onb. SCCI or RAID Controller  
max. 2x per system  
up to  
2x  
S26361-F3066-E130  
S26361-F3066-E573  
Hard disk 300GB / 10K  
Hard disk 73GB / 15K  
10000rpm,<5.5ms, min. 8MB Cache  
Ultra 320 SCSI (320MB/s)  
Interface: Wide SCA (80-pin)  
hot plug/hot replace tray  
occupies one 1" bay  
15000rpm,<4ms, min. 8MB Cache  
Ultra 320 SCSI (320MB/s)  
Interface: Wide SCA (80-pin)  
hot plug/hot replace tray  
occupies one 1" bay  
onb. SCCI or RAID Controller  
max. 2x per system  
onb. SCCI or RAID Controller  
max. 2x per system  
Standard PRIMERGY harddisks must be ordered for upgrade.  
To use these harddisks in the RXI300 a simple frame change must be carried out.  
Upgrade harddisks are always delivered with standard PRIMERGY harddisk frames.  
Unused harddisk positions in the PRIMERGY RXI300 are always equipped with fully  
functional empty harddisk frames. Therefore, after the standard frame is removed, the  
harddisk has to be mounted in the RXI300 specific empty frame.  
The following harddisks are technically released for usage in the PRIMERGY RXI300:  
S26361-F3121-L173  
S26361-F3121-L114  
S26361-F3121-L130  
S26361-F3121-L573  
HDD U320 10k 73GB hot plug 1"  
HDD U320 10k 146GB hot plug 1"  
HDD U320 10k 300GB hot plug 1"  
HDD U320 15k 73GB hot plug 1"  
B
Fujitsu Siemens Computers  
6 of 10  
Enterprise Products PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
B
Section  
SCSI / Fibre Channel Controller  
V
included in the basic unit  
onboard 2 ch.SCSI Controller U320  
connectivity  
The system is equipped with a onboard dual channel Ultra 320 SCSI controller.  
one channel can be connected to internal devices via the SCSI blackplane.  
The two int. HDD's can be mirrored if they are connected to the  
on-board controller with hot swap support.  
1) for int. Drives, RAID 1  
2) ext. VHDCI  
The other SCSI channel can be used by external SCSI devices.  
Fibre Channel controller for subsystems and SAN  
S26361-F3141-E10  
2GBit/s FC Controller  
Emulex  
LP1050, full height bracket  
1 channel 2GBit/sec FC controller  
LC Interface for 50um Fiber  
PCI-X 64Bit / 133MHz, 170mm  
3.3V / 5V tolerant signaling  
max. 2x per system  
Section  
Disk Array  
VI  
Additional RAID Controllers for connection of external Disk Arrays in Subsystem SX31  
S26361-F3006-E128  
2-channel RAID Controller U320  
LSI  
The cables of the connection from the  
subsystems (SX30) to the Raid  
Controllers, see configurator SX30  
320-2  
128MB SDRAM ECC Cache  
RAID 0, 1, 10, 5 & 50  
default with TBBU  
plug: internal 1x HD68;  
external: 1x VHDCI  
without cable  
incl. SW and description (Ger/US)  
64/66 PCI controller, 180mm  
3.3V and 5V tolerant signaling  
max. 2x per system  
All Controllers for the connection of external storage systems are delivered without cables.  
For the configuration of external cabling see the configurator for external storage systems.  
C
Fujitsu Siemens Computers  
7 of 10  
Enterprise Products PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
C
Section  
Communication / Network  
VII  
on-board LAN Controller  
dual Gb Ethernet Contr. on-board  
ext: 2 x RJ 45 connector  
Teaming: Failover, Load Balancing  
All released Intel PCI LAN Controllers can be used with the  
on-board controller in Teaming Mode.  
Single Port LAN Adapter  
S26361-F3054-E1  
S26361-F3053-E1  
Gigabit Ethernet Contr. 1000SX  
Eth.Ctrl 1x1Gbit PCI-X Pro/1000MF LC  
Intel PRO/1000 MF Server Adapter  
Adapter Teaming Support  
Gigabit Ethernet Contr. 1000TX  
Eth.Ctrl 1x1Gbit PCI-X Pro/1000MT Cu  
Intel PRO/1000 MT Server Adapter  
Adapter Teaming Support  
PCI-X (PCI64/133), min 165 mm  
ext:LC-connector  
PCI-X (PCI64/133), min 165 mm  
ext: for RJ45-connector, Cat 5  
connection with Cat 5 cabling  
SW: VLAN, Fast & Gbit Etherchannel  
max. 2x per system  
SW: VLAN, Fast & Gbit Etherchannel  
max. 2x per system  
3x  
Dual Port LAN Adapter  
S26361-F3011-E1  
Gigabit Ethernet Contr dual 1000TX  
Eth.Ctrl 2x1Gbit PCI-X PRO/1000MT Cu  
Intel Pro/1000MT dual Server Adapter  
Adapter Teaming Support  
PCI-X (PCI64/66), min 163 mm  
ext: for RJ45-plug, Cat 5  
connection with Cat 5 cabling  
SW: VLAN, Fast & Gbit Etherchannel  
max. 2x per system  
D
Fujitsu Siemens Computers  
8 of 10  
Enterprise Products PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
D
Section  
System Management Products  
VIII  
FSC IA64 Server Support CD  
The CD contains tools for installing of the system,  
for update and for system diagnose.  
The tools works in the EFI system partition.  
Included in the basic unit.  
Section  
Country specific power cord  
IX  
Country specific power cords are not required for rack versions, except for USA&Canada.  
Power cords are shipped in a rack version with inlet connector for non-heating apparatus.  
Description in englisch. Both included in basic unit.  
T26139-Y1742-L10  
USA, Canada  
For shipments to USA&Canada, you have to order  
two power cords (1,8m, grey). For phase redundancy  
2 Power Cords and 3 PSU's per system are needed.  
End PRIMERGY RXI300  
Fujitsu Siemens Computers  
9 of 10  
Enterprise Products PRIMERGY Server  
 
System Configurator and Order-Information Guide  
PRIMERGY RXI300 Status 2008-01-29  
Change Report  
Date  
order number  
changes  
2006-11-02  
2006-11-02  
2006-11-02  
2006-08-24  
2006-08-25  
2006-08-25  
2005-12-20  
2005-09-23  
2005-06-02  
2005-04-20  
2005-04-07  
2005-01-21  
2004-12-17  
2004-12-17  
2004-11-05  
2004-11-05  
2004-11-05  
2004-11-05  
2004-11-05  
2004-11-05  
2004-05-12  
S26361-F3071-E269  
S26361-K963-V212  
S26361-K963-V213  
S26361-F3071-E412  
S26361-K963-V948  
S26361-K963-V944  
S26361-F2843-E1  
S26361-F3141-E10  
S26361-F3066-E136  
S26361-F3066-E130  
Section IV  
S26361-F3066-E173  
S26361-F3071-E1xx  
S26361-K963-V20x  
S26361-F3071-E263  
S26361-F3071-E269  
S26361-K963-V210  
S26361-K963-V211  
S26361-K963-V212  
S26361-K963-V213  
Processor Itanium2 1.6GHz / 9MB TLC - no longer available  
Rack mountable server 19" (2U) 1.6GHz / 9MB TLC / 4GB Memory - no longer available  
Rack mountable server 19" (2U) 1.6GHz / 9MB TLC / 8GB Memory - no longer available  
Processor Itanium2 9015 1.6GHz / 12MB TLC 400MHz FSB - now available  
Rack mountable server 19" (2U) Itanium 2 9015 dual core processor; 8 GB Memory - now available  
Rack mountable server 19" (2U) Itanium 2 9015 dual core processor; 4 GB Memory - now available  
2GBit/s FC Controller Emulex LP9802, PCI - no longer available  
2GBit/s FC controller Emulex LP1050 - now available  
Hard disk 36GB / 10K - no longer available  
Hard disk 146GB / 10K - now available  
Basic unit without HDDs - now available  
Hard disk 73GB / 10K - now available  
2. Processor Itanium 2 (Madison) - no longer available  
Basic units with Itanium 2 (Madison) processor - no longer available  
Processor Itanium2 1.6GHz / 3MB TLC Fanwood - now available  
Processor Itanium2 1.6GHz / 9MB TLC - now available  
Rack mountable server 19" (2U) 1.6GHz / 3MB TLC Fanwood / 4GB Memory - now available  
Rack mountable server 19" (2U) 1.6GHz / 3MB TLC Fanwood / 8GB Memory - now available  
Rack mountable server 19" (2U) 1.6GHz / 9MB TLC / 4GB Memory - now available  
Rack mountable server 19" (2U) 1.6GHz / 9MB TLC / 8GB Memory - now available  
First draft  
Fujitsu Siemens Computers  
10 of 10  
Enterprise Products PRIMERGY Server  
 

EdgeStar Air Conditioner PAC8000S User Manual
Fisher Plumbing Product 2445 User Manual
Fisher Price Plumbing Product W4119 User Manual
Frigidaire Freezer A01058501 User Manual
Fujitsu Network Card FPCAC14A User Manual
FUNAI CRT Television DCT3203 User Manual
Garmin GPS Receiver 15L User Manual
GE Can Opener 681131066136 User Manual
GE Range 164D3333P159 User Manual
Gigabyte Computer Hardware AGP 4X15V User Manual