Fujitsu Printer FTP 637MCL401 User Manual

24V dRiVEN, FTP-607 Series  
3” HigH SPEEd THERMAL PRiNTER  
FTP-637MCL401/601  
n Overview  
The FTP-637 MCL Series are 24V driven high-speed printers  
with a ultra low profile auto cutter and long life.  
The FTP-637 MCL Series can be used for a variety of  
applications, such as POS terminals, ticket vending machines,  
label printers, banking terminals, and measurement and  
medical equipment.  
n HiGHLiGHTS  
FTP-637MCL401/601  
• Ultra low profile  
Height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm  
• High speed printing  
It can print at 100/150 mm/s maximum by using Fujitsu's  
unique head drive control.  
• Auto Cutter  
Long life and high reliable guilotine with dedicated motor.  
• Easy paper setting  
Our lever platen release mechanism allows a  
wide paper route, so paper can be easily inserted.  
Conventional auto loading is also available.  
FTP-637DSL291  
• Multifunctional die-cast frame  
Wide operating temperature range, long continuous  
printing, high ESD absorbtion and discharge of static  
electricity vibration and shock resistant.  
• RoHS compliant  
FTP-637DSL611R  
 
FTP-637MCL401/601  
n SPECiFiCATiONS  
Item  
Specification  
Interface  
Conforms to RS232C/Centronics  
Power  
For print  
head  
MCL401  
MCL601  
24 VDC average current, 0.7A (1.3A peak)  
24 VDC average current, 1.3A (2.5 A peak)  
(print ratio: 12.5%, print speed 100mm/sec.)  
24 VDC ±5%, 1.0 A maximum  
supply  
For motor  
For cutter  
MCL401  
MCL601  
24 VDC ±5%, 1.1 A maximum  
24 VDC ±5%, 1.3 A maximum  
For logic  
3.3 to 5.25 VDC, 0.2 A maximum  
Dimensions Mechanism with cutter  
104.5 x 42.2 x 21.8 mm (WxDxH)  
Interface  
board  
DSL291  
DSL6xx  
70 x 60 x 12 mm (WxDxH)  
95 x 70 x 21.6 mm (WxDxH)  
Weight  
Mechanism with cutter  
Interface board  
Approximately 118g/122g  
Approximately 50g / 50g  
Life  
Head  
MCL401  
MCL601  
MCL401  
MCL601  
MCL401  
MCL601  
Pulse durability: 50 million pulses/dot (print ratio: 12.5% or less).  
Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less).  
Abrasion resistance:  
Abrasion resistance:  
500,000 cuts  
paper traveling distance 50km  
paper feed length 100km.  
Cutter  
Platen  
1,000,000 cuts  
5,000 times (open/close)  
Operating  
Operating temperature* 0ºC to +50ºC  
environment  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
detection  
20 to 85% RH (no condensation)  
-20ºC to +60ºC (paper not included)  
5 to 95% RH (no condensation)  
Detected by thermistor  
Detection  
function  
Paper out/mark  
detection  
Detected by photo-interruptor  
Detected by sliding switch  
Platen release  
Recommended thermal sensitive paper High sensitive paper  
TF50KS-E4 (Nippon paper)  
TF60KS-E (Nippon paper),  
FTP-020PU001 (58mm)  
PD150R (Oji paper)  
Standard paper  
FTP-020PU701 (58mm)  
TF60KS-F1 (Nippon paper)  
FTP-020P0102 (58mm)  
PD170R (Oji paper)  
Medium life paper  
Long life paper  
P220VBB-1 (Mitsubishi paper)  
PD160R (Oji paper)  
AFP-235 (Mitsubishi paper)  
TP50KJ-R (Nippon paper)  
HA220AA (Nippon paper)  
*+5˚C to +40˚C printing density assurance rance.  
3
 
FTP-637MCL401/601  
n FUNCTiON OF iNTERFACE bOARd  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
Test print function  
8.  
Cutter trouble detect  
Paper out detection  
Paper near end detection  
Paten open detection  
9.  
Motor power saving function  
Mark detection function  
10.  
11.  
12.  
MCU operation abnormality detection  
Power ON/OFF sequence protection  
Thermal head temperature abnormality  
detection  
6.  
7.  
Blow-out fuse detection  
13.  
14.  
Motor over-current protection  
Hardware timer  
Head voltage abnormality detection  
n diMENSiONS  
1. Printer mechanism  
FTP-637MCL401/601  
Center of paper  
90.4  
36.0  
7.5  
Center of mechanism  
10.7  
21.8  
103.2 / 104.5  
55  
ꢀꢀdegrees  
Unit: mm  
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).  
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is  
open.  
4
 
FTP-637MCL401/601  
1. Connector (FPC) specification (CN4)  
(1) Connector  
Mechanical unit side:  
Remote side (housing site):  
FPC connector  
52610-3071 (made by Molex)  
(2) Pin assignment on the mechanical side  
No  
1
Signal  
PHK  
I/O Contents  
I
Photointerrupter (Cathode)  
2
VSEN  
PHE  
VH  
Ground power supply for paper sensor  
Photointerrupter (Emittor)  
Head drive power  
Head drive power  
Head drive power  
Data input  
3
O
I
4
5
VH  
I
6
VH  
I
7
DI  
I
8
STB3  
STB4  
I
Strobe 3  
9
I
Strobe 4  
10 VDD  
11 GND  
12 GND  
13 GND  
14 GND  
15 GND  
16 GND  
17 TM  
Logic Power  
O
I
Head ground  
Head ground  
Head ground  
Head drive power  
Head drive power  
Head drive power  
Thermistor  
18 STB1  
19 STB2  
20 LAT  
21 CLK  
22 VH  
Strobe 1  
I
Strobe 2  
I
Data Latch  
I
Clock  
I
Head drive power  
Head drive power  
Head drive power  
Platen open switch  
Platen open switch  
Motor excite signal A  
Motor excite signal A  
Motor excite signal B  
Motor excite signal B  
23 VH  
I
24 VH  
I
25 SW  
26 SW  
27 MT A  
28 MT A  
29 MT B  
30 MT B  
I
I
I
I
5
 
FTP-637MCL401/601  
Sensor (Photo-  
interruptor)  
Platen unit  
Thermal head  
Motor  
FPC  
Connect terminal:  
surface side  
Connector No  
30, 29, .....................2,1  
(FPC pin numbers)  
2. Cutter (CN5)  
Connector on control circuit side: 52610-0871 Molex or equivalent  
No. Signal I/O  
Contents  
No. Signal I/O  
Contents  
1
3
5
7
VSEN  
PHK  
I
Paper sensor power  
Photo interruptor (cathode)  
Motor excite signal A  
Motor excite signal B  
2
4
6
8
PHE  
MT A  
MT B  
NC  
O
I
Photo interruptor (emittor)  
Motor excite signal A  
Motor excite signal B  
Not connected  
MT A  
MT B  
I
I
I
Fujitsu Components international Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Fax: (31-23) 5560950  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-3021  
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev. November 6, 2008.  
6
 

Eclipse Fujitsu Ten GPS Receiver TomTom User Manual
Fagor America Electric Pressure Cooker M16301457 10 03 User Manual
FEIN Power Tools Drill ABS 12V User Manual
FoodSaver Food Saver V1205 User Manual
Frigidaire Microwave Oven FGMV173K User Manual
FujiFilm Camcorder 16229490 User Manual
Furuno Stepper Machine LS 6000 User Manual
GE Garbage Disposal GFB1000F User Manual
GE Monogram Oven ZSC2001CSS User Manual
Global Technology Associates Network Card GB 250 User Manual