Fujitsu Printer FTP 631MCL301 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER  
3” MECHANISM, WITH AVAILABLE CUTTER  
FTP-631MCL301/302  
OVERVIEW  
This thermal printer (driven by 24 VDC) and cutter provide high  
speed printing for 3-inch wide paper (85 mm). This printer is small in  
size, light weight, and has low power consumption. The print head is  
designed with open construction for easy maintenance.  
This printer is suitable for a variety of applications, such as POS  
terminals, ticket machines, label printers, measuring devices and  
medical equipment.  
In addition to the interface board, a driving LSI (MCU + Gate Array) is  
also available.  
FTP-631MCL301/302 shown after  
assembly with FTP-631CT001cutter  
HIGHLIGHTS  
• Ultra high speed printing  
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu  
Components' unique head drive control system.  
• Auto cutter  
Full or partial cutting is available by normal or reverse rotation of  
the motor (command set).  
• Low power consumption  
The peak current for head driving is approximately 5.2 A (at 50  
mm/s printing speed, 50% printing ratio).  
FTP-621CU102, FTP-633GA101  
• Easy head access  
Head-open construction makes head maintenance easy,  
especially for head cleaning.  
• Paper auto loading function  
The thermal paper can be loaded without head-up lever  
operation.  
• High resolution  
8 dots/mm head provides clear print output.  
• Selectable paper paths  
Front or rear insertion types are available.  
FTP-631MCL302 can print on paper thicknesses of up to 150 µm.  
FTP-621DCL012  
1
 
FTP-631MCL301/302  
(Continued)  
Item  
Specifications  
24 VDC ± 5%, average:*2  
0.33 (1.72) A (at 25 mm/s printing speed, 25% printing ratio)  
0.64 (2.58) A (at 50 mm/s printing speed, 25% printing ratio)  
2.37 (4.29) A (at 100 mm/s printing speed, 25% printing ratio)  
For head  
(
): Peak  
Power supply  
For motor  
For logic  
24 VDC ± 5%, 1.0 A maximum  
5 VDC ± 5%, 0.5 A maximum  
Weight  
Mechanism with cutter: approx. 540 g. Interface board: approx. 100 g  
Mechanism + cutter  
Interface board  
132 (W) × 60 (D) × 71.0 (H) mm (excluding connector)  
140 (W) × 89 (D) × 24.0 (H) mm  
Dimensions  
Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard  
driving method)  
Wear resistance : 50 km (at 25% printing ratio)  
Thermal head  
Life  
Cutter  
Cutting life: 3 × 105 times  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
+5 to +40°C*3  
Environmental  
conditions  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter (command set)  
Detection  
By microswitch  
+0  
Paper width  
85 mm  
–1  
Recommended thermal sensitive  
paper*5  
1 ply paper in roll  
Thicker paper in roll  
:
:
FTP-030P0020  
FTP-030PJ102*4  
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame  
memory). The communication is parameter transfer.  
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.  
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.  
*4: Printer mechanism FTP-631MCL302 is to be used.  
*5: Please contact us for other thermal papers.  
3
 
FTP-631MCL301/302  
DIMENSIONS  
Printer mechanism with cutter  
11.8  
2.5 (Mounting hole)  
Mounting screw  
JAPAN  
25.4  
35.5 (Mounting hole)  
40.5  
7.5 (300)  
68 (At cutter open)  
12  
60  
Unit: mm  
4
 
FTP-631MCL301/302  
Interface board  
139.7  
129.6  
113.1  
73.7  
14.0  
22.9  
4—ø3.6  
(5.1)  
CN9  
CN3  
CN4  
CN2  
CN7  
88.9  
78.8  
28.0  
CN11  
25.4  
CN5  
CN6  
CN1  
CN10  
(5.1)  
(5.1)  
(5.1)  
(5.1)  
14.0  
31.8  
15.3  
88.9  
17  
Height of devices side  
Height of solder side  
23.6  
1.6  
5
Unit: mm  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options.  
5
 
FTP-631MCL301/302  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 273-3021  
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 09/2001  
6
 

Evo Fitness Cooktop Affinity 30G User Manual
Fireboy Xintex LTD Automobile Parts Model 8905 User Manual
Fisher Price Baby Toy 73437 User Manual
Freud Tools Saw FJ85 User Manual
Fuel Fitness Treadmill FT96 User Manual
FujiFilm Camera Accessories EF 20 User Manual
Furuno TV Converter Box IF NMEA2K2 User Manual
GE Indoor Furnishings 45602 User Manual
GE Microwave Oven JE635 User Manual
Glen Dimplex Home Appliances Ltd Gas Grill BI 70 G User Manual