Fujitsu Printer FTP 627USL401 User Manual

24v drive, reCeiPT PriNTer MiCrO UNiT  
2” HiGH SPeed THerMaL PriNTer  
FTP-627USL401/402  
Overview  
The FTP-627 USL Series are 24V driven high-speed printers  
with a ultra low profile auto cutter and long life.  
The FTP-627 USL Series can be used for a variety of applica-  
tions, such as POS terminals, ticket vending machines, label  
printers, banking terminals, and measurement and medical  
equipment.  
HiGHLiGHTS  
Ultra low profile  
Height 108 mm, width 100 mm, depth 94 mm  
FTP-627USL401 platen closed  
High speed printing  
It can print at 100 mm/s (800 dotlines/s) maximum by using  
Fujitsu's unique head drive control.  
Auto Cutter  
Long life and high reliable guilotine with dedicated motor.  
Easy paper setting  
Our lever platen release mechanism allows a  
wide paper route, so 60 mm diameter paper can be easily  
inserted. Conventional auto loading is also available.  
Multifunctional die-cast frame  
Wide operating temperature range, long continuous  
printing, high ESD absorbtion and discharge of static  
electricity vibration and shock resistant.  
FTP-627USL40ꢀ platen open  
Barcodes  
Prints standard, extended and 2-D types  
RoHS compliant  
 
FTP-627USL401/402  
n SPeCiFiCaTiONS  
Item  
Specification  
Iterface  
Conforms to USB/Serial  
Power  
For print head  
24 VDC average current, 0.5A (0.9A peak)  
(print ratio: 12.5%, print speed 100mm/sec.)  
24 VDC ±5%, 0.9 A maximum  
24 VDC ±5%, 1.1 A maximum  
4.75 to 5.25VDC, 0.5 A maximum  
100 x 94 x 108 mm (WxDxH)  
supply  
For motor  
For cutter  
For logic  
Dimensions Mechanism and board  
Weight  
Mechanism and board  
Approximately 310g  
Life  
Head  
Pulse durability: 50 million pulses/dot (under our standard  
conditions); Abrasion resistance: paper traveling distance  
50km (print ratio: 12.5% or less).  
500,000 cuts (20 cuts/minute)  
3,000 hours  
Cutter  
MTBF  
Mechanism  
Circuit board  
500,000 hours  
Operating  
Operating temperature*  
Operating humidity  
Storage temperature  
Storage humidity  
0ºC to +50ºC  
environment  
20 to 85% RH (no condensation)  
-20ºC to +60ºC (paper not included)  
5 to 95% RH (no condensation)  
Detection  
function  
Head temperature detection Detected by thermistor  
Paper out/mark detection  
Detected by photo-interruptor  
Detected by sliding switch  
Platen release  
Recommended thermal sensitive paper  
High sensitive paper  
Standard paper  
TF50KS-E4 (Nippon paper)  
TF60KS-E (Nippon paper),  
FTP-020PU001 (58mm)  
PD105R (Oji paper)  
FTP-020P0701 (58mm)  
TF60KS-F1 (Nippon paper)  
FTP-020P0102 (58mm)  
PD170R (Oji paper)  
Medium life paper  
Long life paper  
P220VBB-1 (Mitsubishi paper)  
PD160R (Oji paper)  
AFP-235 (Mitsubishi paper)  
TP50KJ-R (Nippon paper)  
HA220AA (Nippon paper)  
*+5˚C to +40˚C printing density assurance range.  
3
 
FTP-627USL401/402  
n FUNCTiON OF iNTerFaCe bOard  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test print function  
8.  
9.  
Cutter trouble detect  
Paper out detection  
Motor power saving function  
Paper near end detection  
Platen open detection  
10. Mark detection function  
11. MCU operation abnormality detection  
12. Power ON/OFF sequence protection  
13. Motor over-current protection  
14. Hardware timer  
Thermal head temperature abnormality detection  
Blow-out fuse detection  
Head voltage abnormality detection  
n iNTerFaCe, COMMaNd, OPTiONS  
Connectors on Control Board  
Name  
Functions  
Remarks  
Note  
CN1 +24V power supply connector Connection for +24V power supply  
CN2 RS-232C  
Connection for serial interface  
Connection for USB interface  
-
*2  
*2  
CN3 USB I/F connector  
CN4  
-
CN5 Cutter connector  
Connection for paper cutter  
Connection for operation panel  
Connection for near end switch  
-
CN6 Operation panel connector  
CN7 Near end sensor connector  
*ꢀ  
CN8  
-
CN9 Logic power connector  
Connection for +5V power Supply  
CN10 Head/motor connector  
Note: *1: Option  
Connection for thermal head & paper feed motor 2-inch, 24 pin  
*2: Depends on P/N  
4
 
FTP-627USL401/402  
n diMeNSiONS  
1. Printer mechanism  
FTP-627 Unit Paper ø60  
*2  
2-screw holes *3  
Paper  
86 (paper presenting area)  
(Cross section)  
Hook depth 6 *3  
Unit: mm  
Note: 1. The cable size and FPC are not included in this drawing.  
2. Do not mount anything in the shaded area except the printer.  
3. Connect to the body with 2 screws at 2 hooks.  
5
 
FTP-627USL401/402  
n COMMaNdS  
Command  
Contents  
HT  
LF  
Moves print position to the next tab.  
Line feed.  
FF  
Feeds forms (new page).  
ESC FF  
Data printing in page printing mode.  
Sets reverse printing.  
ECS RS  
ESC US  
Resets reverse printing.  
ESC SP+n  
ESC ! + n  
Character spacing setting.  
Sets print mode.  
ESC $+n1+n2  
ESC % + n  
ESC & +y+c1+c2+x+d1to dn  
ESC *+m+n1+n2+d1+dN  
ESC - +n  
Absolute position spacing.  
External registration character specification/cancellation.  
External registration character definition.  
Sets bit image mode.  
Undeline setting.  
ESC 2  
Sets 1/6 inch line feed length.  
Sets the line feed length.  
ESC 3+n  
ESC ? + n  
ESC @  
External registration character deletion.  
Printer initialization.  
ESC A+n  
Sets the space between the line.  
Sets the page length by character line.  
Sets the tab position.  
ESC C+n  
ESC D+d1+dN +NUL  
ESC E+n  
Highlighted printing specification/cancellation  
Feeds paper in forward direction and prints.  
Reverse paper feed.  
ESC J+n  
ESC K+n  
ESC L  
Page printing mode selection.  
Frame overlay function.  
ESC Q+n+!+j  
ESC R+n  
Selects international character.  
Line printing mode.  
ESC S  
ESC T+n  
Print direction setting (only page mode).  
Right Rotation 90° specification / cancellation.  
ESC V+n  
6
 
FTP-627USL401/402  
Commands continued  
Command  
Contents  
ESC W+Xꢀ+X2+ꢀ+Y2+dXꢀ+dX2+dXꢀ+dY2  
Page printing mode printing area setting.  
ESC X+m+n  
ESC Y+01h+ESC+x+a+m+d~  
ESCY+n1+n2  
ESC a+n  
Setting the turning time of the motor excitation.  
Program download.  
Relative position setting.  
Positional alignment.  
ESC c+1+n  
ESC c+5+n  
ESC d+n  
Sets internal processing.  
Panel switch enable/disable setting.  
Printing and n-line feeding.  
ESC i  
Full cut  
ESC m  
Partial cut  
ECS s+n  
Sets printing speed.  
ECS t+n  
Character code table selection.  
Sets/resets upside down printing.  
Flash memory delete.  
ESC {+n  
ESC DEL+n  
FS !+n  
Kanji printing mode collective specification.  
Kanji printing mode specification.  
Kanji underline specification/cancellation.  
High speed collective image printing specified.  
Kanji printing mode cancellation.  
External character definition.  
Sets the detection functions.  
Kanji code system selection.  
Correction of impressed energy.  
Kanji spacing setting.  
FS &  
FS_+n  
FS *+ m+n1+n2+d1 to dn  
FS .  
FS 2+c1+c2+d1 to dn  
FS 9+n  
FS C+n  
FS E+n  
FS S+n+n1+n2  
FS W+n  
Kanji double height adn width printing specification/cancellation.  
Parameter transmission.  
FS r+n*  
GS ! + n  
Character size specification.  
7
 
FTP-627USL401/402  
Commands continued  
Command  
Contents  
GS $ + n1 + n2  
GS & +m + x + y1 + y2 + d1 to dn  
GS' + m + n  
Vertical absolute position specification in page printing mode.  
Registered bit image definition.  
Registered bit image printing.  
Registered bit image definition.  
Registered bit image printing.  
Line feeds to the next mark.  
Sets the line feed length after mark detection.  
Angle setting of bar code.  
GS *+x+y1+y2 +d1+dn  
GS/ +m  
GS <  
GS A+m+n  
GS B+m  
GS E+n  
Sets print quality.  
GS H+n  
HRI character printing position selection.  
Left margin position setting.  
Printer ID demand.  
GS L+n1+n2  
GS M+n  
GS W + n1 + n2  
GS Y +n1 + n2  
Printing area width setting.  
Vertical relative position specification in page printing mode (vertical  
direction of characters).  
GS e+n+m  
GS f + n  
GS h+n  
Sets bar code width.  
HRI character font selection.  
Sets bar code height.  
Bar code printing.  
y) GS k+m +d1to dk + NUL  
x) GS k+m+n+ d1 to dn  
GS k+m+k1+k2+k3+k4+{[p1][d(1,1)] ~  
[d(1,i)} ~ {[pi][d(i,1)]~[d(i,j)} [00]16  
Print of 2Dcode (QR).  
GS k+m+k1+k2+k3+k4+k5+d1~dn  
GS k+m+k1+k2+k3+k4+k5+k6+d1~dn  
GS w+n  
Print of 2 Dcode (maxi).  
Print of 2 Dcode (PDF417).  
Sets bar code length.  
Customize printer.  
GS C+C+n1+n2+m+fn+b+d1~dn  
*: These commands are valid with FTP-627DSL600 series.  
 
FTP-627USL401/402  
n PriNT SaMPLe  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Fax: (31-23) 5560950  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
ꢀ02E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-3021  
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev. September 26, 2007.  
9
 

Eizo Computer Monitor L351 User Manual
Extron electronic Stereo Receiver WPC 210 A EU User Manual
Fellowes Indoor Furnishings 480 2HS User Manual
Fisher Price Baby Toy V2769 User Manual
Fuji Bikes Power Supply 5000G11S P11S User Manual
Furuno Radar Detector 1722C User Manual
GE Dishwasher GDF520PGDBB User Manual
Gefen Cable Box EXT DVI 141B User Manual
GE Vacuum Cleaner 106766 User Manual
Goodman Mfg Air Conditioner GPC13M User Manual