24 V DRIVE, FTP-607 SERIES
HIGH SPEED THERMAL PRINTER
3-INCH TYPE MECHANISM
FTP-637MCL103
■ OVERVIEW
The FTP-607MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (80mm/s) for 2-inch and 3-
inch wide paper. Our original platen removal mechanism
allows easy paper loading and maintenance.
The FTP-607 MCL series can be used for a variety of
applications, such as POS/ECR, Kiosk terminals, ticket
issuing terminals, label printers, banking terminals, and
measurement and medical equipment.
■ HIGHLIGHTS
• Compact size
Height 15.5 mm, width 70.4 mm, depth 33.0 mm for the 2
inch model. The 3-inch product has a width of 92.4mm.
•
•
•
High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by
using Fujitsu's unique head drive control.
Easy loading mechanism (ELM) type
Our unique platen removal mechanism improved paper
loading and maintenance.
Multi-featuring diecast fame
By application of multi-featuring diecast frame, continous
print by function of heat-sink, high ESD stand by function
of earth frame and shock/vibration stand by function of
solid frame are valid.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
FTP-637MCL103
■ SPECIFICATIONS
Specification
Item
FTP-637MCL103
Conforms to RS232C / Centronics
Interface
24 VDC ±5%, 1.5 A average, 2.2 A peak
(print ratio: 25%)
For print head
Operating
Voltage
For motor
24 VDC ±5%, 1 A maximum
For logic
5 VDC ± 5%, 0.5 A maximum
92.4 x 33.0 x 15.5 mm (WxDxH)
70 x 60 x 24 mm (WxDxH)
Approximately 52g
Printer mechanism
Interface board
External
dimensions
Weight
Life
Pulse resistance: 5x 108 pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling
distance 50km (print ratio: 25% or less)
Head
Operating temperature
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C*1
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release detection Detected by slide switch
Recommended thermal sensitive paper FTP-030PU001(80mm)
*1: printing density assurance range, operation is possible at -0˚C to +40˚C
3
FTP-637MCL103
■ DIMENSIONS
1. Printer mechanism
FTP-637MCL103
center of paper
87.8
80.0
35(paper end sensor)
10.7
15.5
4.6
44.7
86.7
87.6±0.1
Unit: mm
2 Interface board
41.0
30
1
CN3
CN8
CN5
CN1
CN2
CN7
CN6
1
6
3
1
8
1
17.5
35.5
51.0
3.3
63.5
3.3
Unit: mm
70.0
4
FTP-637MCL103
■ CONNECTOR PIN ASSIGNMENT OF MECHANISM (FPC)
1. Thermal Head
Part number
:
52610-3090 Molex or equivalent
FTP-637MCL103 PIN ASSIGNMENT
Signal
PHK
I/O Contents
No
1
—
I
Photointerruptor (Cathode)
2
VSEN
PHE
SW
SW
VH
Ground power supply for paper sensor
Photointerruptor (Emittor)
Platen open switch
3
O
—
—
I
4
5
Platen open switch
6
7
VH
I
Power supply for thermal head
8
VH
I
9
DI
I
Print data in
10 STB3
11 STB4
12 VDD
13 GND
14 GND
15 GND
16 GND
17 GND
18 GND
19 TM
I
Print enable 3
Print enable 4
Power for logic
I
I
—
—
—
—
—
—
O
I
Ground power supply for thermal head
Thermistor
Print enable 1
Print enable 2
Print data latch
Clock
20 STB1
21 STB2
22 LAT
23 CLK
24 VH
I
I
I
I
I
I
I
I
I
25 VH
Power supply for thermal head
26 VH
27 MT/A
28 MT/A
29 MT/B
30 MT/B
Stepping motor excitation signal
5
FTP-637MCL103
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
6
|