OPERATING INSTRUCTIONS
FWT449GF
PREWASH
KNITS &
DELICATES
REGULAR
HEAVY WASH
FINAL
SPIN
WASH
WASH
RINSES
&
SPINS
FINAL
SPIN
FINAL
SPIN
PULL TO START/
PUSH TO STOP
RINSES
SPINS
PERM PRESS
WASH
&
4.
A
d
d
l
a
u
n
d
r
y
l
o
a
d
t
o
t
h
e
w
a
s
h
d
r
u
m
.
10. Start the washer by closing the door and
pulling out the cycle selector knob. The washer
will not operate with the door open. As a safety
measure, the door will automatically lock during
the entire wash cycle.
Before Operating Your
Washer
5. Open the dispenser drawer and add the
m e a su re d a m o u n t o f d e t e rg e n t t o t h e
detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.
Read your washer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best washing results.
•
•
To stop the washer, push in the cycle selector
knob.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETYINSTRUCTIONSin yourwasherOwner'sGuide
before operating this appliance.
To change a cycle, push in the cycle selector
knob and turn it clockwise to the desired
setting.
6. Set Wash/Rinse Temperature according to
fabric type and soil level of each load.
•
Pull out the knob to restart the washer.
See Control Settings Chart (reverse side) for
m o re in fo rm a t io n o n su g g e st e d w a t e r
temperatures.
11. Remove items when cycle ends. When the
Cycle Signal control is on, a signal will sound at
the end of the cycle.
Operating Steps
Read and follow Washing Procedures in your
Owner's Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
7. Select desired Cycle Signal volume.
Note: From time to time you may see water in the
bleach and fabric softener compartments. This is a
result of the siphoning action and is part of the
normal operation of the washer.
8. If desired, select Extra Rinse in the Regular or
Perm Press cycle.
1. Sort laundry into loads that can be washed
together.
9. Push in the cycle selector knob and turn it
clockwise to the desired wash cycle. See
Cycle Selection (reverse side) for cycle descriptions
and the Control Settings Chart for suggested
cycle settings.
(continued, reverse side)
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
Printed in U. S. A.
P/N 131771500
(9805)
ꢀꢁ Cut along this edge to separate English from other languages.
ꢀ
|