Solid 4
4 c h a n n e l c l a s s A B p o w e r a m p l i f i e r
• 2,3 or 4 channel amplifier
• Remote control
P r e l i m i n a r y s p e c i f i c a t i o n s
• Stable into 2 Ohms (4 x 100W)
• Pseudo-balanced RCA input
• Auto power
Specifications
Nominal power measured at
4 x 75W
14.4V continuously @ 4Ω
Nominal power measured at
4 x 100W
14.4V continuously @ 2Ω
Power in bridge mode
measured at 14.4V
continuously @ 4Ω
2 x 200W
Signal/noise ratio
> 80dB (A)
50 to 1kHz
10 Hz – 60kHz
20kΩ
Damping factor at 4Ω
Frequency response (-1dB)
Input impedance
Input sensitivity
0.2 – 5V
Input sensitivity high level
0.4 - 9Vrms
High-pass crossover
(1/2 and 3/4 channels)
50 – 150Hz (12
dB/oct.)
Low-pass crossover
(sub channel)
50 – 150Hz (12
dB/oct.)
THD / Power
Remote control (sub channel)
Adjustable bass boost level
Variable phase (SUB)
Subsonic filter
YES
-
-
-
Power vs THD@4Ohm
1
10mm2
7 AWG
Maximum cross section of
loudspeaker cables
35mm2
2 AWG
Maximum cross section of
power cables
Protections
Short-circuit
Thermal overload
Overvoltage
Polarity reversal
13/4 x 1113/16 x 77/8
(45 x 300 x 200mm)
”
Dimensions (HxWxD)
Mechanical Drawing
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l’Avenir - 42353 La Talaudière cedex
|