Features and Monitor Controls
Monitor Installation
Camera Installation
Monitor
• Install the monitor on the windshield of the car.
• Don’t install the monitor in an extremely hot or humid place
(radiator, air duct, etc.) or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
• The monitor is not waterproof.
• Use a silicon waterproof tape to wrap the connector of camera
and extension cable to ensure waterproof.
Specifically designed for passenger cars, trucks and SUVs.
• Supports single camera input.
• Protect the cable by using conduit or running the cable inside the
• High-low voltage and short-circuit protection.
• Suction cup bracket installation.
vehicle as much as possible.
• Automatically displays reverse camera view when reverse gear
is engaged.
Attach the supplied bracket to the glass or flat area and make
sure it’s firmly affixed.
Camera
R E A R V I E W C A M E R A S Y S T E M
• CMOS camera in mini size.
• Three-color proximity guide.
• Operates over a wide temperature range.
First, find the
best position
and angle.
Second, rotate
the bracket and
fix it firmly.
System power ON/OFF
Adjust the angle of
the monitor and
fasten the back
screw firmly.
2
3
4
Owner’s Manual
|