Electrolux Refrigerator 210621236 11052010 User Manual

S75348KG5  
User manual  
Fridge-Freezer  
 
Safety information  
3
the appliance are thoroughly familiar with its operation and safety features. Save these  
instructions and make sure that they remain with the appliance if it is moved or sold, so  
that everyone using it through its life will be properly informed on appliance use and safety.  
For the safety of life and property keep the precautions of these user's instructions as the  
manufacturer is not responsible for damages caused by omission.  
Children and vulnerable people safety  
• This appliance is not intended for use by persons (including children) with reduced  
physical, sensory or mental capabilities, or lack of experience and knowledge, unless  
they have been given supervision or instruction concerning use of the appliance by a  
person responsible for their safety.  
Children should be supervised to ensure that they do not play with the appliance.  
• Keep all packaging well away from children. There is risk of suffocation.  
• If you are discarding the appliance pull the plug out of the socket, cut the connection  
cable (as close to the appliance as you can) and remove the door to prevent playing  
children to suffer electric shock or to close themselves into it.  
• If this appliance featuring magnetic door seals is to replace an older appliance having  
a spring lock (latch) on the door or lid, be sure to make that spring lock unusable be-  
fore you discard the old appliance. This will prevent it from becoming a death trap for  
a child.  
General safety  
CAUTION!  
Keep ventilation openings clear of obstruction.  
• The appliance is intended for keeping foodstuff and/or beverages in a normal house-  
hold as explained in this instruction booklet.  
• Do not use a mechanical device or any artificial means to speed up the thawing process.  
• Do not use other electrical appliances (such as ice cream makers) inside of refrigerat-  
ing appliances, unless they are approved for this purpose by the manufacturer.  
• Do not damage the refrigerant circuit.  
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the ap-  
pliance, a natural gas with a high level of environmental compatibility, which is never-  
theless flammable.  
During transportation and installation of the appliance, be certain that none of the  
components of the refrigerant circuit become damaged.  
If the refrigerant circuit should become damaged:  
– avoid open flames and sources of ignition  
– thoroughly ventilate the room in which the appliance is situated  
• It is dangerous to alter the specifications or modify this product in any way. Any dam-  
age to the cord may cause a short-circuit, fire and/or electric shock.  
WARNING!  
Any electrical component (power cord, plug, compressor) must be replaced by a certified  
service agent or qualified service personnel.  
1. Power cord must not be lengthened.  
 
4
Safety information  
2. Make sure that the power plug is not squashed or damaged by the back of the  
appliance. A squashed or damaged power plug may overheat and cause a fire.  
3. Make sure that you can come to the mains plug of the appliance.  
4. Do not pull the mains cable.  
5. If the power plug socket is loose, do not insert the power plug. There is a risk of  
electric shock or fire.  
You must not operate the appliance without the lamp cover1) of interior lighting.  
6.  
• This appliance is heavy. Care should be taken when moving it.  
• Do not remove nor touch items from the freezer compartment if your hands are damp/  
wet, as this could cause skin abrasions or frost/freezer burns.  
• Avoid prolonged exposure of the appliance to direct sunlight.  
Bulb lamps2) used in this appliance are special purpose lamps selected for household  
appliances use only. They are not suitable for household room illumination.  
Daily Use  
• Do not put hot pot on the plastic parts in the appliance.  
• Do not store flammable gas and liquid in the appliance, because they may explode.  
Do not place food products directly against the air outlet on the rear wall.3)  
• Frozen food must not be re-frozen once it has been thawed out.  
• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-  
structions.  
• Appliance's manufacturers storage recommendations should be strictly adhered to. Re-  
fer to relevant instructions.  
• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pres-  
sure on the container, which may cause it to explode, resulting in damage to the appli-  
ance.  
• Ice lollies can cause frost burns if consumed straight from the appliance.  
Care and cleaning  
• Before maintenance, switch off the appliance and disconnect the mains plug from the  
mains socket.  
• Do not clean the appliance with metal objects.  
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.  
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean  
the drain. If the drain is blocked, water will collect in the bottom of the appliance.  
Installation  
For electrical connection carefully follow the instructions given in specific paragraphs.  
• Unpack the appliance and check if there are damages on it. Do not connect the appli-  
ance if it is damaged. Report possible damages immediately to the place you bought  
it. In that case retain packing.  
• It is advisable to wait at least four hours before connecting the appliance to allow the  
oil to flow back in the compressor.  
1) If the lamp cover is foreseen  
2) If the lamp is foreseen  
3) If the appliance is Frost Free  
 
Control panel  
5
• Adequate air circulation should be around the appliance, lacking this leads to overheat-  
ing. To achieve sufficient ventilation follow the instructions relevant to installation.  
• Wherever possible the back of the product should be against a wall to avoid touching  
or catching warm parts (compressor, condenser) to prevent possible burn.  
• The appliance must not be located close to radiators or cookers.  
• Make sure that the mains plug is accessible after the installation of the appliance.  
Connect to potable water supply only.4)  
Service  
• Any electrical work required to do the servicing of the appliance should be carried out  
by a qualified electrician or competent person.  
• This product must be serviced by an authorized Service Centre, and only genuine spare  
parts must be used.  
Environment Protection  
This appliance does not contain gasses which could damage the ozone layer, in either its  
refrigerant circuit or insulation materials. The appliance shall not be discarded together  
with the urban refuse and rubbish. The insulation foam contains flammable gases: the  
appliance shall be disposed according to the applicable regulations to obtain from your  
local authorities. Avoid damaging the cooling unit, especially at the rear near the heat  
exchanger. The materials used on this appliance marked by the symbol are recyclable.  
CONTROL PANEL  
1
2
3
4
5
6
7
8
9
10  
11 12 13  
14 15  
1 ON/OFF switch  
2 Fridge temperature regulator, + button  
3 Fridge temperature indicator  
4 Fridge temperature regulator, - button  
5 COOLMATIC button  
6 COOLMATIC indicator  
7 Fridge compartment indicator  
8 Freezer compartment indicator  
9 FROSTMATIC indicator  
10 FROSTMATIC button  
11 Freezer temperature regulator, + button  
4) If a water connection is foreseen  
 
6
Control panel  
12 Freezer temperature indicator  
13 Freezer temperature regulator, - button  
14 Alarm reset button  
15 Alarm indicator  
Switching on  
1. Insert the plug into the mains socket.  
2. Set ON/OFF switch to ON.  
3. The alarm indicator light flashes since the temperature is reached.  
The acoustic alarm sounds.  
4. Press the alarm reset button to reset the alarm.  
Switching off  
To switch the entire appliance off:  
1. Set ON/OFF switch to OFF.  
2. Disconnect the mains plug from the mains socket.  
Temperature regulation  
The set temperature of the fridge and of the freezer may be adjusted by pressing the  
temperature regulator button. The temperature indicators show the set temperature.  
For a correct storage of the food the following temperatures should be set:  
• +5 °C in the fridge  
• -18 °C in the freezer.  
The set temperature will be reached within 24 hours.  
Fluctuations of some degrees around set temperature are normal and does not mean any  
fault in the appliance.  
COOLMATIC function  
The COOLMATIC function is suited for quick cooling of large quantities of goods in the  
refrigerator.  
To activate the function, do these steps:  
1. Press the COOLMATIC button.  
2. The COOLMATIC indicator switches on.  
The COOLMATIC function now provides for intensive cooling. A temperature of +2°C is  
automatically selected.  
The COOLMATIC function is ended automatically after a period of 6 hours.  
You can deactivate the function at any time:  
1. Press the COOLMATIC button.  
2. The COOLMATIC indicator switches off.  
Holiday function  
This function allows you to keep the refrigerator shut and empty during a long holiday  
period (e.g. the summer holidays) without the formation of a bad smell.  
The fridge compartment must be empty when the holiday function is on.  
To activate the function:  
 
First use  
7
1. press continuously the temperature regulator (+ button) until the letter "H" (Holiday)  
appears on the temperature indicator. The Holiday function sets the temperature ap-  
prox +15°C. The refrigerator is in the energy-saving mode.  
To deactivate the function:  
1. set the required temperature by pressing the fridge temperature regulator.  
FROSTMATIC function  
The FROSTMATIC function accelerates the freezing of fresh food and, at the same time,  
protects foodstuffs already stored from undesirable warming.  
To activate the function, do these steps:  
1. Press the FROSTMATIC button.  
2. The FROSTMATIC indicator switches on.  
The FROSTMATIC function is ended automatically after a period of 52 hours.  
You can deactivate the function at any time:  
1. Press the FROSTMATIC button.  
2. The FROSTMATIC indicator switches off.  
High temperature alarm  
In the event of an abnormal temperature rise inside the freezer (e.g. power cut) alarm  
indicator light will start to flash and a buzzer will sound.  
Push the alarm reset button to stop the buzzer sound, while the alarm indicator light will  
continue to flash.  
The buzzer will stop automatically when the temperature has returned to normal while  
the alarm indicator light will continue to flash.  
Press the alarm reset button. The alarm indicator light goes out and at the same time the  
freezer temperature indicator show for about 5 seconds the warmest temperature  
reached in the freezer compartment.  
FIRST USE  
Cleaning the interior  
Before using the appliance for the first time, wash the interior and all internal accesso-  
ries with lukewarm water and some neutral soap so as to remove the typical smell of a  
brand-new product, then dry thoroughly.  
Do not use detergents or abrasive powders, as these will damage the finish.  
DAILY USE  
Storage of frozen food  
When first starting-up or after a period out of use, before putting the products in the  
compartment let the appliance run at least 2 hours on the higher settings.  
 
8
Daily use  
In the event of accidental defrosting, for example due to a power failure, if the power  
has been off for longer than the value shown in the technical characteristics chart under  
"rising time", the defrosted food must be consumed quickly or cooked immediately and  
then re-frozen (after cooling).  
Thawing  
Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator com-  
partment or at room temperature, depending on the time available for this operation.  
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cook-  
ing will take longer.  
Movable shelves  
The walls of the refrigerator are equipped with a  
series of runners so that the shelves can be posi-  
tioned as desired.  
Bottle rack  
Place the bottles (with the opening facing front)  
in the pre-positioned shelf.  
If the shelf is positioned horizontally, place only  
closed bottles.  
This bottle holder shelf can be tilted in order to  
store previously opened bottles. To obtain this re-  
sult, pull the shelf up so it can rotate upwards  
and be placed on the next higher level.  
 
Daily use  
9
Vegetable Drawer  
The drawer is suitable for storing fruit and vege-  
tables.  
There is a separator inside the drawer that can  
be placed in different positions to allow for the  
subdivision best suited to personal needs.  
There is a grille (if foreseen) on the bottom of  
the drawer to separate the fruit and vegetables  
from any humidity that may form on the bot-  
tom surface.  
1
2
All parts inside the drawer can be removed for  
cleaning purposes  
Positioning the door shelves  
To permit storage of food packages of vari-  
ous sizes, the door shelves can be placed at  
different heights.  
To make these adjustments proceed as fol-  
lows:  
gradually pull the shelf in the direction of  
the arrows until it comes free, then reposi-  
tion as required.  
 
10 Helpful hints and tips  
Removal of freezing baskets from the freezer  
2
1
The freezing baskets have a limit stop to prevent their accidental removal or falling  
out. At the time of its removal from the freezer, pull the basket towards yourself and,  
upon reaching the end point, remove the basket by tilting its front upwards.  
At the time of putting it back, slightly lift the front of the basket to insert it into the  
freezer. Once you are over the end points, push the baskets back in their position.  
HELPFUL HINTS AND TIPS  
Normal Operating Sounds  
• You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped  
through the coils or tubing. This is correct.  
• When the compressor is on, the refrigerant is being pumped around and you will hear  
a whirring sound and a pulsating noise from the compressor. This is correct.  
• The thermic dilatation might cause a sudden cracking noise. It is natural, not danger-  
ous physical phenomenon. This is correct.  
Hints for energy saving  
• Do not open the door frequently or leave it open longer than absolutely necessary.  
• If the ambient temperature is high and the Temperature Regulator is set to low tem-  
perature and the appliance is fully loaded, the compressor may run continuously, caus-  
ing frost or ice on the evaporator. If this happens, set the Temperature Regulator to-  
ward warmer settings to allow automatic defrosting and so a saving in electricity con-  
sumption.  
Hints for fresh food refrigeration  
To obtain the best performance:  
• do not store warm food or evaporating liquids in the refrigerator  
• do cover or wrap the food, particularly if it has a strong flavour  
• position food so that air can circulate freely around it  
 
Care and cleaning 11  
Hints for refrigeration  
Useful hints:  
Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegeta-  
ble drawer.  
For safety, store in this way only one or two days at the most.  
Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.  
Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw-  
er(s) provided.  
Butter and cheese: these should be placed in special airtight containers or wrapped in  
aluminium foil or polythene bags to exclude as much air as possible.  
Milk bottles: these should have a cap and should be stored in the bottle rack on the door.  
Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.  
Hints for freezing  
To help you make the most of the freezing process, here are some important hints:  
• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating  
plate;  
• the freezing process takes 24 hours. No further food to be frozen should be added dur-  
ing this period;  
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;  
• prepare food in small portions to enable it to be rapidly and completely frozen and to  
make it possible subsequently to thaw only the quantity required;  
• wrap up the food in aluminium foil or polythene and make sure that the packages are  
airtight;  
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding  
a rise in temperature of the latter;  
• lean foods store better and longer than fatty ones; salt reduces the storage life of food;  
• water ices, if consumed immediately after removal from the freezer compartment, can  
possibly cause the skin to be freeze burnt;  
• it is advisable to show the freezing in date on each individual pack to enable you to  
keep tab of the storage time.  
Hints for storage of frozen food  
To obtain the best performance from this appliance, you should:  
• make sure that the commercially frozen foodstuffs were adequately stored by the re-  
tailer;  
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the  
shortest possible time;  
• not open the door frequently or leave it open longer than absolutely necessary.  
• Once defrosted, food deteriorates rapidly and cannot be refrozen.  
• Do not exceed the storage period indicated by the food manufacturer.  
CARE AND CLEANING  
CAUTION!  
Unplug the appliance before carrying out any maintenance operation.  
 
12 Care and cleaning  
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging  
must therefore only be carried out by authorized technicians.  
Periodic cleaning  
The equipment has to be cleaned regularly:  
• clean the inside and accessories with lukewarm water and some neutral soap.  
• regularly check the door seals and wipe clean to ensure they are clean and free from  
debris.  
• rinse and dry thoroughly.  
Do not pull, move or damage any pipes and/or cables inside the cabinet.  
Never use detergents, abrasive powders, highly perfumed cleaning products or wax pol-  
ishes to clean the interior as this will damage the surface and leave a strong odour.  
Clean the condenser (black grill) and the compressor at the back of the appliance with a  
brush or a vacuum cleaner. This operation will improve the performance of the appliance  
and save electricity consumption.  
Take care of not to damage the cooling system.  
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the  
plastics used in this appliance. For this reason it is recommended that the outer casing of  
this appliance is only cleaned with warm water with a little washing-up liquid added.  
After cleaning, reconnect the equipment to the mains supply.  
Defrosting of the refrigerator  
Frost is automatically eliminated from the evaporator of the refrigerator compartment  
every time the motor compressor stops, during normal use. The defrost water drains out  
through a trough into a special container at the back of the appliance, over the motor  
compressor, where it evaporates.  
It is important to periodically clean the defrost  
water drain hole in the middle of the refrigera-  
tor compartment channel to prevent the water  
overflowing and dripping onto the food inside.  
Use the special cleaner provided, which you will  
find already inserted into the drain hole.  
 
What to do if… 13  
Defrosting of the freezer  
The freezer compartment of this model, on the other hand, is a "no frost" type. This  
means that there is no buildup of frost when it is in operation, neither on the internal  
walls nor on the foods.  
The absence of frost is due to the continuous circulation of cold air inside the compart-  
ment, driven by an automatically controlled fan.  
WHAT TO DO IF…  
CAUTION!  
Before troubleshooting, disconnect the power supply.  
Only a qualified electrician or competent person must do the troubleshooting that is not  
in this manual.  
There are some sounds during normal use (compressor, refrigerant circulation).  
Problem  
Possible cause  
Solution  
The appliance is noisy.  
The appliance is not supported Check if the appliance stands sta-  
properly.  
ble (all the four feet should be  
on the floor).  
The compressor operates The Temperature regulator may Set a warmer temperature.  
continually.  
be set incorrectly.  
The door is not closed correctly. Refer to "Closing the door".  
The door has been opened too  
frequently.  
Do not keep the door open lon-  
ger than necessary.  
The product temperature is too Let the product temperature de-  
high.  
crease to room temperature be-  
fore storage.  
The room temperature is too  
high.  
Decrease the room temperature.  
Refer to "FROSTMATIC function".  
Refer to "COOLMATIC function".  
The FROSTMATIC function is  
switched on.  
The COOLMATIC function is  
switched on.  
During the automatic defrost- This is correct.  
ing process, frost defrosts on  
the rear plate.  
Water flows on the rear  
plate of the refrigerator.  
Water flows into the re- The water outlet is clogged.  
frigerator.  
Clean the water outlet.  
Products prevent that water  
flows into the water collector.  
Make sure that products do not  
touch the rear plate.  
 
14 What to do if…  
Problem  
Possible cause  
Solution  
Water flows on the  
ground.  
The melting water outlet does  
not flow in the evaporative tray to the evaporative tray.  
above the compressor.  
Attach the melting water outlet  
There is too much frost  
and ice.  
Products are not wrapped prop- Wrap the products better.  
erly.  
The door is not closed correctly. Refer to "Closing the door".  
The Temperature regulator may Set a higher temperature.  
be set incorrectly.  
The door is not closed correctly. Refer to "Closing the door".  
The temperature in the  
appliance is too high.  
The product temperature is too Let the product temperature de-  
high.  
crease to room temperature be-  
fore storage.  
Many products are stored at  
the same time.  
Store less products at the same  
time.  
The temperature in the  
There is no cold air circulation  
refrigeration is too high. in the appliance.  
Make sure that there is cold air  
circulation in the appliance.  
Products are too near to each  
other.  
Store products so that there is  
cold air circulation.  
The temperature in the  
freezer is too high.  
The appliance does not  
operate.  
The appliance is switched off.  
Switch on the appliance.  
The mains plug is not connec-  
Connect the mains plug to the  
ted to the mains socket correct- mains socket correctly.  
ly.  
The appliance has no power.  
Connect a different electrical ap-  
There is no voltage in the mains pliance to the mains socket. Con-  
socket.  
tact a qualified electrician.  
Close and open the door.  
Refer to "Replacing the lamp".  
The lamp does not work. The lamp is in stand-by.  
The lamp is defective.  
As much as the advice does not lead to result, call the nearest brand-mark service.  
Replacing the lamp  
1. Disconnect the appliance.  
2. Push the movable part to unhook the  
lamp cover (1).  
3. Remove the lamp cover (2).  
4. Replace the lamp with one of the same  
power and specifically designed for do-  
mestic appliances only.  
1
2
5. Install the lamp cover.  
6. Connect the appliance.  
7. Open the door. Make sure that the lamp comes on.  
 
Technical data 15  
Closing the door  
1. Clean the door gaskets.  
2. If necessary, adjust the door. Refer to "Installation".  
3. If necessary, replace the defective door gaskets. Contact the Service Center.  
TECHNICAL DATA  
Dimension  
Height  
Width  
Depth  
1850 mm  
595 mm  
648 mm  
18 h  
Rising Time  
The technical information are situated in the rating plate on the internal left side of the  
appliance and in the energy label.  
INSTALLATION  
WARNING!  
Read the "Safety Information" carefully for your safety and correct operation of the ap-  
pliance before installing the appliance.  
Positioning  
Install this appliance at a location where the ambient temperature corresponds to the  
climate class indicated on the rating plate of the appliance:  
Climate class  
Ambient temperature  
SN  
N
+10°C to + 32°C  
+16°C to + 32°C  
+16°C to + 38°C  
+16°C to + 43°C  
ST  
T
 
16 Installation  
Location  
The appliance should be installed well away from  
sources of heat such as radiators, boilers, direct  
sunlight etc. Ensure that air can circulate freely  
around the back of the cabinet. To ensure best  
performance, if the appliance is positioned be-  
low an overhanging wall unit, the minimum dis-  
tance between the top of the cabinet and the  
wall unit must be at least 100 mm . Ideally, how-  
ever, the appliance should not be positioned be-  
low overhanging wall units. Accurate levelling is  
ensured by one or more adjustable feet at the  
base of the cabinet.  
WARNING!  
It must be possible to disconnect the appliance  
from the mains power supply; the plug must therefore be easily accessible after installation.  
Electrical Connection  
CAUTION!  
Any electrical work required to install this appliance should be carried out by a qualified  
electrician or competent person.  
WARNING!  
This appliance must be earthed.  
The manufacturer declines any liability should these safety measures not be observed.  
The wires in the mains lead are coloured in accordance with the following code:  
Green and Yellow: Earth  
1
 
Installation 17  
Brown:  
Blue:  
Live  
3
5
Neutral  
As the colours of the wires in the mains lead of this appliance may not correspond with  
the coloured markings identifying the terminals in your plug, proceed as follows:  
1. Connect the wire coloured green and yellow to the terminal marked either with the  
letter “E“ or by the earth symbol or coloured green and yellow.  
2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or  
coloured black.  
3. Connect the wire coloured brown to the terminal either marked with the “L“ or col-  
oured red.  
4.  
4
Check that no cut, or stray strands of wire is present and the cord clamp is secure  
over the outer sheath.  
5. Make sure the electricity supply voltage is the same as that indicated on the appli-  
ance rating plate.  
6. Switch on the appliance.  
The appliance is supplied with a 13 amp plug fitted . In the event of having to change  
2
the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.  
WARNING!  
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure  
that it is disposed of safely.  
Rear spacers  
In the bag with the documentation, there  
are two spacers which must be fitted as  
shown in the figure.  
Slacken the screws and insert the spacer under  
the screw head, then tighten again the screws.  
 
18 Installation  
Levelling  
When placing the appliance ensure that it  
stands level. This can be achieved by two adjust-  
able feet at the bottom in front.  
Removing the shelf holders  
Your appliance is equipped with shelf retainers  
that make it possible to secure the shelves dur-  
ing transportation.  
A
To remove them proceed as follows:  
1. Move the shelf holders in the direction of  
the arrow (A).  
2. Raise the shelf from the rear and push it for-  
ward until it is freed (B).  
B
3. Remove the retainers (C).  
C
Door reversibility  
WARNING!  
Before carrying out any operations, remove the plug from the power socket.  
To carry out the following operations, we suggest that this be made with another person  
that will keep a firm hold on the doors of the appliance during the operations.  
 
Installation 19  
1. Open the doors. Unscrew the middle  
hinge (m2). Remove the plastic spacer  
(m1).  
2. Remove the spacer (m6) and move to  
the other side of the hinge pivot (m5).  
3. Remove the doors.  
4. Remove the left-hand cover pin of the  
middle hinge (m3,m4) and move to the  
other side.  
m1  
m5  
m2  
m6  
5. Fit the pin of the middle hinge (m5) in-  
to the left-hand hole of the lower door.  
m4  
m3  
6. Remove using a tool the cover (b1). Un-  
screw the lower hinge pivot (b2) and  
the spacer (b3) and place them on the  
opposite side.  
b1  
7. Re-insert the cover (b1) on the oppo-  
site side.  
b2  
b3  
8. Reverse the door locking elements  
(d2,d3), move to the other side of the  
other door and fix by screwing in the  
screw (d4).  
9. Re-insert the stoppers (d5,d6) on the  
other side of the doors.  
d2  
d4  
d3  
d6  
d5  
 
20 Environmental concerns  
10. Remove the handle. Unscrew the top  
handle bracket from the handle rod  
(h1). Unscrew the bottom handle brack-  
et from the door (h2)  
h1  
h2  
h3  
Unscrew the top handle bracket from  
the door (h3).  
11. Install the handle in the opposite side.  
h4  
h5  
h6  
Re-screw the handle bracket on the  
door (h4). Turn the handle bracket with  
the handle and screw them to the door  
(h5) and the fitted handle bracket (h6).  
12. Re-insert the lower door on the lower  
hinge pivot (b2).  
13. Insert the middle hinge (m2) into the  
left drill of the lower door.  
14. Unscrew the upper hinge pivot (t1) and  
place it on the opposite side.  
15. Fit the upper door on the upper door  
pivot.  
16. Re-insert the upper door on the middle  
hinge pivot (m5) slightly tilting both  
doors.  
17. Re-screw the middle hinge (m2). Do  
not forget the plastic spacer (m1).  
Do a final check to make sure that:  
• All screws are tightened.  
• The magnetic seal adheres to the cabinet.  
• The door opens and closes correctly.  
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the  
cabinet. In that case, wait for the natural fitting of the gasket.  
In case you do not want to carry out the above mentioned operations, contact the near-  
est After Sales Service Force. The After Sales Service specialist will carry out the reversibil-  
ity of the doors at your cost.  
ENVIRONMENTAL CONCERNS  
The symbol  
on the product or on its packaging indicates that this product may not  
be treated as household waste. Instead it should be taken to the appropriate collection  
point for the recycling of electrical and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused by inappropriate  
waste handling of this product. For more detailed information about recycling of this  
product, please contact your local council, your household waste disposal service or the  
shop where you purchased the product.  
 
21  
 
22  
 
23  
 

Ericsson Printer 4900 User Manual
EverFocus Security Camera EDN850H User Manual
Fagor America Cookware Cast Aluminum Cookware User Manual
FireplaceXtrordinair Indoor Fireplace 98500507 User Manual
Fisher Paykel Ventilation Hood HI120DMB1 User Manual
Focal Car Speaker 27 V2 FA User Manual
Ford Automobile 1999 Crown Victoria User Manual
Frymaster Fryer 819 5432 User Manual
Garmin GPS Receiver 190 01117 02 User Manual
Giant Water Pump GP8045 User Manual