MBR800
System Requirements:
Mobile Broadband Router
∙ Mobile Broadband Data card (USB or ExpressCard) with Active
Subscription, or Supported Phone with Active Tethered Data Plan
∙ Windows 2000/XP/Vista, Mac OS X, or Linux PC
∙ Internet Explorer v6.0, Firefox v2.0, or Safari v1.0 (minimum)
1
Connect Power:
Plug the power adapter into the
power connector on the rear of the
MBR800. Next, plug the adapter into a
wall socket.
Power Supply
3
For a Wired WAN
connection:
Connect one end of the Ethernet
cable to the WAN port on your MBR800.
Connect the other end to your Internet
WAN source, such as cable or DSL modem.
2
For a Wireless WAN
(Cellular) Connection:
Connect your activated mobile
broadband adapter to the USB port or
the ExpressCard port on the side of the
MBR800.
The activated mobile broadband adapter must be
on the MBR800 Supported Devices list. For more
4
Connect Local Wired
Clients:
Connect one end of a standard RJ45
Ethernet cable to a LAN port on the
MBR800 and the other end to a computer.
You may connect up to four (4) comput-
ers.
Continue to the back page for access
information.
Parts List:
∙ MBR800 Mobile Broadband Router
∙ AC Power Adapter (12V, 1.5A)
∙ CAT5 Ethernet Cable (1.5 meters)
∙ Warranty Registration Card
∙ Wall Mounting Hardware
ꢀ Quick Start Guide (this document)
Part Number: 184357-400
|