Coleman Tent 2000001978 User Manual

TM  
HOOLIGAN 2  
MODEL 2000001978  
6. Go to opposite end of the main pole and gradually apply  
pressure to the pole forming an arch. Insert the pin into the  
pole end. (Fig. 3 & 4)  
Before you begin  
Read all instructions before set up.  
• Select a level site clear of rocks, branches, and other hard or  
sharp objects, to install your tent.  
WARNING: Keep clear of overhead power lines.  
• Do not set up your tent under trees because of potential  
lightning strikes or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent  
property damage or personal injury.  
• For best results in windy conditions, position narrow end of  
tent into the wind.  
• Enlist the help of at least one other person to assist you when  
it is time to assemble the tent.  
Pole Descriptions  
Pole  
Pole  
Pole  
Fig. 4  
Description  
Qty. Dia.  
Repair Kit Replacement Kit  
6. Drive in stakes at an angle through the two metal loops to  
Main Poles, black  
1
11mm 5010000539 5010000549  
help anchor the sides of the tent.  
To Set Up Tent  
To Attach Rainfly  
1. Unfold tent and spread out on a clean, level surface with the  
door facing perpendicular to the wind direction. Unzip door.  
2. Stretch out corners and sides of tent. Secure four corners  
with stakes driven in at an angle through the loops, at the  
end of the web straps, to better anchor the tent (Fig. 1 & 2).  
Note: Staking the corners will make it easier to raise and  
tear-down the tent.  
1. Drape rainfly over tent. Make sure vestibule and window on  
the rainfly are positioned over the tent door and the window  
on the tent. (Fig. 5)  
Rainfly  
Vestibule  
Window on  
back of  
Rainfly  
Sleeve  
Stake  
Stake  
Back of Tent  
Wind  
Direction  
Pin  
Window  
Pin  
Door  
Front of Tent  
Fig. 5  
2. Unzip door on rainfly and fold back flaps for better access  
to the hook & loop fasteners on the underside of the rainfly.  
(Fig. 6)  
Front of Tent  
Stake  
Fig. 1  
3. Wrap the hook & loop fasteners around the main pole  
to secure (Fig. 7). There are seven fasteners located on  
the rainfly.  
IMPORTANT:  
Plastic  
Loop  
Never drive stakes  
through plastic loops  
on the web straps.  
Fig. 2  
3. Assemble main pole by interlocking the black, shock-corded,  
sections.  
4. Insert main pole through sleeve in  
top of tent. (Fig. 1)  
5. Insert one end of black main pole  
into pin on metal loop located at  
either end of tent. (Fig. 3)  
Fig. 6  
IMPORTANT:  
Make certain all seven  
hook & loop fasteners  
are secured before moving  
Main  
Pole  
on to next assembly step.  
Fig. 7  
Metal Loop  
& Pin  
Fig. 3  
(continued on other side)  
 

Cobalt Networks TV Converter Box 9033 SD User Manual
Control4 Home Theater Server HC 300 User Manual
Cornelius Beverage Dispenser TRIAD 150 User Manual
Creek Audio Stereo Amplifier Wyndsor User Manual
Desa Water Heater GWP10 GWN10T User Manual
Dixon Lawn Mower ZTR 7523 User Manual
Ducane HVAC Furnace RLHF R80C User Manual
Dynex Digital Camera DX WC100 User Manual
Fisher Paykel Humidifier MR480 User Manual
Fujitsu Air Conditioner AOYR24LCC User Manual