Cannon Printer Accessories iP 1200 User Manual

Updated 30.01.06 Ref Page  
Removed Label  
Magenta  
Filling Hole  
Black  
Colour  
Removed Label  
Black  
Filling Hole  
Cyan  
Filling Hole  
Yellow  
Filling Hole  
CANON  
Canon Pixma: iP-1200, iP-1600, iP-2200,  
MP-150, MP-170, MP-450.  
BLACK & COLOUR CARTRIDGE  
1. The filler holes are located under the label on top of the cartridge.  
2. Peel label back on top of cartridge.  
3. Enlarge filling hole(s) with silver screw piece provided.  
4. Assemble syringe and steel filling tube and fill with appropriate colour ink.  
5. Insert the steel filling tube into the appropriate filling holes. (See diagram above).  
Push down into centre of the sponge.  
IMPORTANT: Cartridge contains a sponge and a slight resistant may be felt.  
6. SLOWLY Inject ink. When ink overflows from filling hole or starts to leak from  
print heads cartridge is full. Stop injecting immediately.  
IMPORTANT: Clean syringe with water and dry before refilling next colour.  
7. After refilling replace label back over hole and seal with adhesive tape.  
8. Leave the cartridge to stand overnight on non-absorbent surface this will ensure no  
leakage and give the ink time to fully saturate the sponge.  
IMPORTANT: DO NOT LEAVE ON TISSUE.  
9. Install cartridge and run a priming cycle.  
PLEASE NOTE: The ink indicator level may need to be turned off. Check your  
Canon instructions manual for details.  
 

Blackberry Cell Phone Curved 8520 User Manual
Black Decker Coffeemaker DDCM200 User Manual
Blanco Camera Lens 157 080 User Manual
Blodgett Convection Oven ZEPHAIRE E User Manual
Blodgett Oven AC 500 User Manual
Briggs Stratton Portable Generator 30424 User Manual
BRK electronic Fire Extinguisher FE10GM User Manual
Broan Cooktop E662 User Manual
Canon Digital Camera 2807B006 User Manual
Canon Printer Accessories Canon Pixma IP6000 User Manual