Video | LTC 0620 Series DinionXF Day Night Cameras
LTC 0620 Series DinionXF Day Night
Cameras
u 15-bit DSP Technology
u Superb sensitivity
u Mechanically switching IR filter for IR sensitivity at
night
u XF-Dynamic for unsurpassed wide dynamic range
u Bilinx Communication for remote set-up and control
The LTC 0620 High Performance 1/2-inch Digital CCD
Day/Night Camera ensures the highest image quality
possible at any time. Depending on the available light
the camera will automatically switch from color to
monochrome.
A unique combination of 15-bit digital video
processing that enhances sensitivity and XF-Dynamic
which extends the dynamic range provides a sharper,
more detailed image with outstanding accuracy in
color reproduction.
All Dinion cameras are supplied ready to operate.
Simply attach and focus the lens, then connect power.
No tools are required for back focus and power
connection. For especially challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and On-
screen Display (OSD). The camera automatically
detects the lens type. The Lens Wizard ensures
accurate back-focusing for perfectly sharp pictures at
all times.
Functions
XF-Dynamic
The highly accurate 15-bit digital signal is
automatically processed to optimally capture the
detail in both the high and low light areas of the scene
simultaneously, maximizing the information visible in
the picture.
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion
cameras. Technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate set-
up and adjustment, and improves overall performance.
In addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Video Motion Detection
The built-in video motion detector allows you to select
up to four fully programmable areas with individual
thresholds. The global scene change detector
minimizes false alarms caused by sudden lighting
3 | LTC 0620 Series DinionXF Day Night Cameras
Active Pixels
Camera ID
Lens Types
16 character editable string, position
selectable
PAL Model
752 H x 582 V
768 H x 492 V
Manual, DC- and Video-iris auto-detect
with override
NTSC Model
DC-iris drive: max. 50 mA continuous
Sensitivity (3200 k)
Sensitivity (full video)1)
Sensitivity 50 IRE1)
Video iris: 11.5 ± 0.5 VDC, max. 50 mA
continuous
1.4 lux (0.14 fc)
0.31 lux / 0.052 lux
(0.031 fc / 0.0052 fc) (Monochrome
Mode)
Remote Control
Bilinx coaxial communication
1) F/1.2, 89% reflection, SensUp off
Minimum illumination1)
0.18 lux / 0.024 lux
(0.018 fc / 0.0025 fc) (Monochrome
Mode)
Mechanical
Dimensions (H x W x L)
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 in.)
without lens
Minimum Illumination
with SensUp
0.018 lux / 0.0024 lux
(0.0018 fc / 0.00024 fc) (Monochrome
Mode)
Weight
450 g (0.99 lbs) without lens
Tripod Mount
Controls
Bottom (isolated) and top 1/4-inch 20 UNC
OSD with softkey operation
Horizontal Resolution
Signal-to-Noise-Ratio
Video Output
540 TVL
> 50 dB
Environmental
1 Vpp, 75 Ohm
Y: 1 Vpp / C: 0.3 Vpp
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
-20 °C to +50 °C (-4 °F to +122 °F)
-25 °C to +70 °C (-13 °F to +158 °F)
20% to 93% Relative humidity
Up to 98% Relative humidity
Y/C Output
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter
Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Ordering information
Sensitivity up
Auto Black
Range
Off, automatic continuous up to 10x
On, off selectable
LTC 0620/11 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, PAL, DSP, 12 –
28 VAC/11 – 39 VDC, 50 Hz
32x dynamic range enhancement
Auto, off selectable
Order number LTC0620/11
Noise Reduction
Contour
Sharpness enhancement level selectable
Off, area and level selectable
LTC 0620/21 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, NTSC, DSP, 12 –
28 VAC/11 – 39 VDC, 60 Hz
BLC
Order number LTC0620/21
Gain
Auto (maximum level selectable to 28 dB)
or fixed level selectable
LTC 0620/51 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, PAL, DSP, 85 –
265 VAC, 50 Hz
Lens Mount
CS (max lens protrusion 5 mm, 0.2 in.)
White Balance
ATW (2500–10000 K), AWB hold, manual
WB selectable
Order number LTC0620/51
LTC 0620/61 DinionXF Day Night Camera
1/2-inch, high performance, 540 TVL, NTSC, DSP, 85 –
265 VAC, 60 Hz
VMD
4 area, sensitivity selectable
VMD or Bilinx
Alarm Output
Order number LTC0620/61
Alarm Input
(TTL)
Profile switching, +5 V nominal,
+40 VDC max.
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 –12 mm, DC-iris, C-mount, F1.2-360, 4-pin
Order number LTC3764/20
Alarm Output Relay
Max. 30 VAC or +40 VDC, max. 0.5 A
continuous, 10 VA
External Synchronal
Input
75 Ohm or high impedance selectable
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount, F1.4-360, 4-
pin
Cable Compensation
Up to 1000 m (3000 ft) coax without
external amplifiers (automatic set-up in
combination with coaxial communication)
Order number LTC3774/30
4 | LTC 0620 Series DinionXF Day Night Cameras
LTC 3783/50 Zoom Lens IR corrected
1/2-inch, 8.5 – 85 mm, Video-iris, C-mount F1.6-360, 4-
pin
Order number LTC3783/50
LTC 3793/50 Zoom Lens IR corrected
1/2-inch, 8 – 144 mm, Video-iris, C-mount, F1.6-360, 4-
pin
Order number LTC3793/50
TC120PS Power Supply Unit
110-120 VAC/15 VDC, 50/60 Hz, 300 mA
Order number TC120PS
TC220PS Power Supply Unit
230 VAC/12 VDC, 50 Hz, 10 VA
Order number TC220PS
TC220PSX‑24 Power Supply Unit
230 VAC/20 VAC, 50 Hz, 20 VA
Order number TC220PSX-24
TC1334 Power Supply Unit
120 VAC/24 VAC, 60 Hz, 30 VA
Order number TC1334
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB Adaptor
Order number VP-CFGSFT
Represented by:
Americas:
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
China:
America Latina:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862
© Bosch Security Systems 2013 | Data subject to change without notice
2099302795 | en, V2, 29. Mar 2013
|