Video | LTC 0610 Series DinionXF Color Cameras
LTC 0610 Series DinionXF Color Cameras
u 15-bit DSP technology
u XF-Dynamic
u Bilinx communication
u NightSense
u Default shutter
The LTC 0610 Series of High Performance 1/2-inch
Digital CCD Color Cameras create the best possible
image, even under the most difficult light and scene
conditions. Based on unique 15-bit digital video
processing technology and employing XF-Dynamic,
these cameras provide the ultimate sensitivity with
extended dynamic range. By employing the best 1/2-
inch CCD available, advanced front end processing,
combined with the outstanding Dinion DSP, the
cameras achieve an astonishing sensitivity, providing
better color images in low light situations and sharper
daytime images.
Intelligent White balance algorithms, supported by a
White Balance Hold function and even full manual
white balance, ensure the most accurate color
reproduction possible. All Dinion cameras are supplied
ready to operate. Simply attach and focus the lens,
and connect power to provide optimal pictures under
virtually all scene conditions. No tools are required for
back focus and power connection.
Functions
XF-Dynamic
Extended dynamic range is brought to a new level on
the LTC 0610 Series Camera by XF-Dynamic
technology. XF-Dynamic automatically processes the
highly accurate 15-bit digital signal to optimally
capture the detail in both the highlight and lowlight
areas of the scene simultaneously, to maximize the
information visible in the picture.
Bilinx Technology
The LTC 0610 Series cameras incorporate Bilinx. Bilinx
is a bidirectional communication capability embedded
in the video signal of all Bosch Dinion cameras. With
Bilinx technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate setup
and adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
For extra challenging situations where fine tuning or
special settings are required, the camera parameters
can be individually set using the control buttons on the
side of the camera and On-screen Display (OSD). Also,
to aid installation, the camera automatically detects
the lens type, and using the Lens Wizard ensures
accurate (back) focusing for perfectly sharp pictures
at all times.
Video Motion Detection
The built-in video motion detector allows you to select
up to four fully programmable areas with individual
thresholds. The global scene change detector
3 | LTC 0610 Series DinionXF Color Cameras
LTC 0610/51
LTC 0610/61
85–265 VAC
85–265 VAC
45–65 Hz
45–65 Hz
Alarm Input (TTL)
Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay
Max. 30 VAC or +40 VDC, max. 0.5 A
continuous, 10 VA
Power Consumption
Imager
4 W
External Synchronal
Input
75 Ohm or High Impedance selectable
Interline CCD type, ½-in. image format
Cable
Up to 1000 m (3000 ft) coax without external
amplifiers (automatic setup in combination
with coaxial communication)
Active Pixels
PAL Models
NTSC Models
Compensation
752 H x 582 V
768 H x 492 V
Camera ID
Lens Types
16 character editable string, position
selectable
Manual, DC- and Video-iris auto-detect with
override DC-iris drive: max 50mA continuous
Sensitivity (3200 k)
Sensitivity (full
video)1)
1.4 lx (0.14 fc)
Video-iris: 11.5 ± 0.5 VDC, max. 50 mA
continuous
Sensitivity 50 IRE1)
0.35 lux / 0.14 lux (NightSense)
(0.035 fc / 0.014 fc (NightSense))
Remote Control
Bi-directional coaxial communication
1) F/1.2, 89% reflection, SensUp off
Minimum
0.18 lux / 0.08 lux (NightSense)
(0.018 fc / 0.008 fc (NightSense))
Illumination1)
Mechanical
Minimum
Illumination with
SensUp
0.018 lux / 0.008 lux (NightSense)
(0.0018 fc / 0.0008 fc (NightSense))
Dimensions
(H x W x L)
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 in.)
without lens
Weight
450 g (0.99 lbs) without lens
Bottom (isolated) and top 1/4-inch 20 UNC
OSD with softkey operation
Horizontal
Resolution
540 TVL
> 50dB
Tripod Mount
Controls
Signal-to-Noise-
Ratio
Environmental
Video Output
Y/C Output
1Vpp, 75 Ohm
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
-20 °C to +50 °C (-4 °F to +122 °F)
-25 °C to +70 °C (-13 °F to +158 °F)
20% to 93% Relative humidity
up to 98% Relative humidity
Y: 1 Vpp / C: 0.3 Vpp
Synchronization
Internal, Line Lock, HV-lock and Genlock (Burst
lock) selectable
Shutter
Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Ordering information
Night Sense
Sensitivity up
Auto Black
Auto, forced, off
Off, automatic continuous up to 10x
On, off selectable
LTC 0610/11 DinionXF Color Camera
1/2-inch, high performance, 540 TVL, PAL, DSP, 12 –
28 VAC/11 – 39 VDC, 50 Hz
Dynamic Range
32x dynamic range enhancement
Auto, off selectable
Order number LTC0610/11
Dynamic Noise
Reduction
LTC 0610/21 DinionXF Color Camera
1/2-inch, high performance, 540 TVL, NTSC, DSP, 12 –
28 VAC/11 – 39 VDC, 60 Hz
Contour
BLC
Sharpness enhancement level selectable
Off, area and level selectable
Order number LTC0610/21
LTC 0610/51 DinionXF Color Camera
1/2-inch, high performance, 540 TVL, PAL, DSP, 85 –
265 VAC, 50 Hz
Gain
Auto (maximum level selectable to 28 dB) or
fixed level selectable
Order number LTC0610/51
Lens Mount
C and CS
White Balance
ATW (2500–10000 K), AWB hold, manual WB
selectable
LTC 0610/61 DinionXF Color Camera
1/2-inch, high performance, 540 TVL, NTSC, DSP, 85 –
265 VAC, 60 Hz
VMD
4 area, sensitivity selectable
VMD or Bilinx
Order number LTC0610/61
Alarm Output
4 | LTC 0610 Series DinionXF Color Cameras
LTC 3264/30 Varifocal Lens
1/2-inch, 4.5 – 10 mm, DC-iris, CS-mount F1.6-360, 4-
pin
Order number LTC3264/30
LTC 3283/20 Zoom Lens
1/2-inch, 8.0 – 48 mm, Video-iris, CS-mount F1.4-360,
4-pin
Order number LTC3283/20
TC120PS Power Supply Unit
110-120 VAC/15 VDC, 50/60 Hz, 300 mA
Order number TC120PS
TC220PS Power Supply Unit
230 VAC/12 VDC, 50 Hz, 10 VA
Order number TC220PS
TC220PSX‑24 Power Supply Unit
230 VAC/20 VAC, 50 Hz, 20 VA
Order number TC220PSX-24
TC1334 Power Supply Unit
120 VAC/24 VAC, 60 Hz, 30 VA
Order number TC1334
Accessories
LTC 3274/41 Varifocal Lens
1/2-inch, 7.5 – 75 mm, DC-iris, C-mount, F1.7-360, 4-
pin
Order number LTC3274/41
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB Adaptor
Order number VP-CFGSFT
Represented by:
Americas:
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
China:
America Latina:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862
© Bosch Security Systems 2013 | Data subject to change without notice
2010020875 | en, V1, 29. Mar 2013
|