BV382517V
1.7 L variable el
Customer assistant
USA 1-855- 664 -1252
Features:
Displays Kettle temperature in Fahrenheit or Celsius
Displays actual Water Temperature in Kettle even after power oꢀ
Allows user to set and Hold water temperature for up to one hour
Preset temperatures for the most popular hot beverages
Easy Grip handle for excellent pour control
Commercial UL (USA Only)
Brushed Stainless ꢁnish
1500 W
Cord Storage wrap in Base
Retains last settings when power oꢀ or unplugged
READ THE MANUAL BEFORE USE AND SAVE FOR FUTURE REFERENCE
1 year limited warranty
ADDITIONAL SAFEGUARDS
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
EXTENSION CORDS
A short power-supply cord is to be provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. Longer detachable power-supply cords or
extension cords are available and may be used if care is exercised in their use. If a longer
detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the cord set or extension cord should be at least as
great as the electrical rating of the appliance, and
2) The extension cord should be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the countertop
or tabletop where it can be tripped over, snagged, or pulled on unintentionally
(especially by children).
This appliance must be grounded while in use.
CAUTION: To ensure continued protection against risk of electric shock, connect to
properly ground outlets only.
GROUNDING INSTRUCTIONS
The appliance has a plug that looks like Figure A. An adaptor, as shown in Figure B, should
be used for connecting a 3-prong grounding plug to a 2-wire receptacle. The grounding
tab, which extends from the adaptor, must be connected to a permanent ground such
as a properly grounded receptacle as shown in Figure C, using a metal screw.
Circuit grounding conductor
connected properly
Metal mounting
screw
Adapter
(B)
(C)
(A)
Grounding means
Cover of grounded
outlet box
Grounding prong
PARTS
3
4
1
2
5
6
17
8
7
F/
C
8888
on/off
hold
14
16
9
11
15
10
12
13
10. On/oꢀ switch
1. Spout
2. ꢁlter
3. Lid
4. Lid release button
5. Handle
6. Water level Indicator
(inside of kettle on Handle side)
7. Power cord with plug
8. Base with cord storage
9. Shut oꢀ Temperature Set Button
11. Power on indicator light
12. - button
13. + button /Count Up Timer Start
14. Display Degree °F/°C button
15. Hold Temperature button. To
maintain a set temperature +/- 2°C
16. Hold function indicator light
17. Waterproof cover
ILLUSTRATOR
A
C
B
liter
max
1.7
1.5
1.25
1.0
F/
C
8888
on/off
hold
F/
C
8888
on/off
hold
0.75
min
D
F
E
Temp
Set
F/
C
8888
on/off
hold
I
H
G
F/
C
8888
F/
C
on/off
hold
8888
on/off
hold
J
OPERATION
Before plugging the kettle into the wall outlet, check that the electrical circuit is not
overloaded with other appliances.
Preparing the Kettle for First time Use:
•
Fill the kettle to Max ꢁll line with cold water to boil at the Max temperature
setting and empty.
Let the appliance cool down 1 minute
•
•
Repeat boiling and rinse at least 2 times before using.
1. Setting up the Kettle:
•
•
Set the base (8) on a flat, even and steady surface.
Remove the kettle from the base (8). Place the waterproof cover (17) on top
of base.(ill.A)
Press the lid release button (4) to open the lid (3). Fill the kettle with cold water
(ill. B). Do not fill over the max marking (1.7L). See the water level window (6) in
handle for adding the desired amount of water.
After ꢁlling the kettle with water, press the lid (3) into kettle to close. Plug into the
power cord into the standard wall outlet. (ill. C)
•
•
•
Put the kettle ꢁrmly on the base and press power on button, the power on
indicator light on. And the display ꢂashes the set temperature for 3 seconds. (ill. D)
2.
3.
Selecting the Display Temperature Scale, Fahrenheit or Celsius:
Press the °F/°C button to display the temperature in Fahrenheit or Celsius when
power on.
•
Setting the shut oꢀ Temperature: (ill. E)
•
Manual Setting Shut Oꢀ Temperature :
Press the Shut oꢀ Temperature set Button, the last shut oꢀ temperature ꢂashes
on the display.
Press the + or – button to select shut oꢀ temperature.
Once the display stops ꢂashing the temperature is set and the display shows
current water temperature.
•
•
•
•
Selecting the Preset Shut Oꢀ Temperatures
Press the Shut oꢀ Temperature Set Button
•
• Continue to press Shut oꢀ Temperature Set Button until your desired Preset Shut
oꢀ Temperature is displayed.
Note: The Factory preset temperatures are: 60°C (140°F), 80°C (176°F),
85°C (185°F), 88°C (190°F), 96°C (205°F) and 98°C (208°F).
The Factory Default Temperature is 185°F (85°C)
Note: Once you have set the Shut Oꢀ Temperature is it is stored in Memory and will
be recalled whenever you turn on the kettle. No need to set every time unless
you want to change shut oꢀ temperature.
Note: During the heating cycle the LED display shows the current water temperature.
Note: After set temperature is reached the heater will shut oꢀ but the display will
continue to show water temperature for up to 1 hour if the user doesn’t
remove the kettle from base.
OPERATION
Note: If kettle is removed from base during heating cycle the Heating cycles shuts
oꢀ and Power On Indicator Light (11) goes oꢀ, and LED display “0 00”. When the
kettle is returned to base the Display it will show current water temperature for
7 minutes and then the display will shut oꢀ.
Note: To manually interrupt the boiling process, press the on/of button at any
time, Heater and LED lights will shut oꢀ.
4.
Selecting Water Temperature Hold:
•
This feature allows the Kettle to reach and maintain water at a set temperature for
up to one hour. This is an optional setting.
•
•
First select the Shut oꢀ temperature using above steps.
Press the hold button, the last set Hold temperature will ꢂash on the display for 3
seconds and the hold indicator LED light is lit. (ill. E).
•
•
When set temperature is reached the heater will turn heating oꢀ and on as needed
to maintain set temperature. The power on indicator light is on and the LED
displays the current water temperature.
When you lift kettle to pour and return to the base, the Hold button must be
pressed again within 5 seconds if you want to continue the Hold Temperature
function. If you don’t press the Hold button within 5 seconds of returning to base
the display will show current water temperature for 7 minutes and then the unit
will power oꢀ.
Note: To manually interrupt the boiling process, press the on/of button at any
time, Heater and LED lights will shut oꢀ.
High Altitude Users
Water boils at lower a temperature at higher elevations, according to the below graph
to set your kettle brewing temperature
Count Up Timer Feature:
Note: when you lift the kettle, the LED display will Display the count-up timer. The ꢁrst
number indicator the minutes, and the last two number indicator the seconds (the
maximum count time is 7 minutes). Press the + button to start the timer. Set the kettle
back on the base and lift back oꢀ to reset timer to zero.
minutes
seconds
WARNING: The appliance is very hot during use. Do not touch kettle surface. Danger
of burns!
OPERATION
WARNING: Never leave the kettle unattended while boiling water. Especially if there
are children nearby.
WARNING: Do not open the lid while boiling water.
WARNING: Do not immerse the base or the kettle in water or any liquids. This may
cause electric shock or damage the appliance.
WARNING: Be careful when handling hot water. Danger of scalding!
Suggested temperature chart:
Temperature
Setting
Coꢀee
200 °F ( 93 °C)
Green Tea
175 °F ( 80 °C)
185 °F ( 85 °C)
190 °F ( 88 °C)
White Tea
Oolong Tea
Black Tea/ Herbal Tea / Tea Bags
208 °F ( 98 °C)
195 °F ( 91 °C)
190 °F ( 88 °C)
Cereal
Cocoa
CLEANING
Clean the kettle regularly. This appliance contains no user serviceable parts and requires
little maintenance. Leave any servicing or repairs to qualified personnel.
•
•
Clean the outside of the base and the kettle with a damp soft cloth.
Clean the inside of the kettle with dishwasher detergent and rinse thoroughly with
water.
•
•
Do not use abrasive cleansers.
After cleaning dry the kettle and the base thoroughly.
WARNING: Never immerse the kettle or the base in water or other liquids.
DECALCIFYING
When mineral scale builds up in your kettle, it can aꢀect temperature consistency and
slow down boil time. If Not descaled regularly, the kettle can stop working accurately.
To ensure optimum performance, Bonavita recommends descaling the kettle when
mineral build-up is visible inside the kettle.
Note: Vinegar many not eꢀectively descale the kettle and can be diꢃcult to thoroughly
rinse. Vinegar may also leave behind an odor that could aꢀect future uses. Bonavita
recommends using Dezcal Descaler.
How to use Decal Descaler:
1. Fill the kettle with warm water.
2. Add one packet of Dezcal to kettle.
3. Bring solution to boil.
4. Let vessel cool for 15 mins, then discard solution.
5. Rinse thoroughly with fresh water.
1
2
3
4
5
:15 min
12
9
3
6
STORAGE
Clean and dry all parts before storing. Store the kettle in its box or in a clean, dry place.
Never wrap the power cord around the kettle. Always use the cord storage on the
bottom of the base.
TECHNICAL DATA
Rated voltage:
Rated current:
120 V 60 Hz
12.5 A
Rated power input: 1500 W
Capacity: max. 57.5 oz (1.7 L)
LIMITED WARRANTY
1 year limited warranty from the date of original purchase.
1. This warranty extends only to the original consumer purchaser or gift recipient. Keep
the original sales receipt, as proof of purchase is required to make a warranty claim.
The product must be purchased at an authorized retailer for the warranty to be valid.
2. Defects that occurred due to improper connection, improper handling, or repair
attempts by non-authorized persons are not covered by the warranty. The same
applies for failure to comply with the use of consumables (e.g. cleaning and
decalcifying agents or water ꢁlters) that do not correspond to the original
speciꢁcations.
3. Routine wear parts (e.g. Seals and valves, permanent ꢁlter) and fragile parts like glass
are excluded from the warranty.
4. Damages which are not under responsibility of the manufacturer are not covered by
the warranty. This is valid, especially for claims arising from improper use
(e.g. operation with wrong type of current or voltage).
5. The guarantee becomes void if repairs are carried out by third parties, who are not
authorized by the manufacturer to do so and/or if spare parts are used other than the
original ones.
6. Failure to comply with any important safeguards listed in section 1 will void limited
warranty.
7. Commercial UL Rated: USA
8. Household UL Rated: Canada
To make a warranty claim, do not return this appliance to the store. Please email
[email protected] or call 1-855-664-1252. For faster service, locate the
model, type and series numbers on your appliance and have available for the call or
website visit.
|