Blockhead Video Game Controller BH1101 User Manual

Quick Setup Guide  
TM  
WARNING: Do not use the controller if you have respiratory, heart or  
other physical ailments that limit your physical activity. If  
you have any doubts, consult with a doctor.  
WARNING: This guitar is not intended for small children. This guitar  
may contain small pieces that should be kept away from  
small children as they may pose a choking hazard.  
WARNING: Do not plug the guitar controller's cable into two game  
consoles at the same time, or into other game consoles or  
ports that are not supported by this guitar.  
Wired 4-in-1 Grinder Guitar  
TM  
TM  
for PS2 and PS3  
TM  
Designed for use with RockBand and Guitar Hero® games.  
Model: BH1101  
PlayStation®2 and PlayStation®3 are registered trademarks of Sony Computer Entertainment Inc.  
This product is not sponsored, endorsed or approved by Sony.  
1
PS2 & PS3 Guitar Hero  
3
Check the Light Indicators  
1
Choose game  
LED  
GH  
RB  
G H  
R B  
G H  
R B  
Guitar Front  
When your guitar connects with the console successfully, one of  
the four indicators will be illuminated to indicate the controller  
number.  
Guitar Front  
Switch to "GH"  
4
Removing Faceplate  
2
Connect  
G H  
R B  
Faceplate  
Release Button  
USB  
DONGLE  
Knob of the  
Effects Switch  
Grasp the little white knob on the top of the Effects Switch then  
gently pull outwards and be careful not to lose it. Now grasp the  
faceplate Release Button and squeeze both buttons together  
while lifting upwards.  
Insert PS2 gameport plug into PS2 if playing PS2 and insert USB  
plug into PS3 if playing PS3. Then power on your game console.  
Note: Do not insert USB and Gameport plugs at the same time!  
If you are experiencing technical difficulties, please repeat steps 1 to 3 to ensure  
you are doing things properly.  
Tips  
If it still isn't working, please double check another Guitar controller on your  
console to make sure the console is working OK.  
2
3
PS2 & PS3 Rock Band  
3
Check the Light Indicators  
1
Choose game  
LED  
GH  
RB  
G H  
R B  
G H  
R B  
Guitar Front  
When your guitar connects with the console successfully, one of  
the four indicators will be illuminated to indicate the controller  
number.  
Guitar Front  
Switch to "RB"  
4
Removing Faceplate  
2
Connect  
G H  
R B  
Faceplate  
Release Button  
USB  
Knob of the  
DONGLE  
Effects Switch  
Grasp the little white knob on the top of the Effects Switch then  
gently pull outwards and be careful not to lose it. Now grasp the  
faceplate Release Button and squeeze both buttons together  
while lifting upwards.  
Insert the USB plug into PS2 or PS3.  
Note: Do not insert USB and Gameport plugs at the same time!  
If you are experiencing technical difficulties, please repeat steps 1 to 3 to ensure  
you are doing things properly.  
Tips:  
If it still isn't working, please double check another Guitar controller on your  
console to make sure the console is working OK.  
4
5
WARRANTY AND TECHNICAL SUPPORT  
Button Configuration  
Every Blockhead branded product comes with a 90 day warranty (U.S. Only). Blockhead will  
replace, repair or refund any defective products or components at no charge to you within 90  
days of the purchase date. This warranty does not apply if the Blockhead branded product has  
been damaged by misuse, neglect, or reasons unrelated to defective materials or assembly.  
Blockhead is not responsible or liable for loss of data or loss of equipment use. You must retain  
a copy of your original receipt for warranty support.  
Start  
LED  
D-Pad  
Select  
PS Button  
GH/RB  
Switch  
For support on Blockhead products, contact us by visiting www.blockheadgaming.com or call  
us at 727-431-0650.  
G H  
R B  
For general questions, comments, information or grammar tips, email us at  
FCC INFORMATION  
Fret Buttons  
Whammy Strum  
Bar  
Bar  
Effects  
Switch  
This equipment has been tested and found to comply with the limits for a class B digital device,  
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and used in accordance with the instru  
-ctions, may cause harmful interference to radio communications.However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Guitar Front  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
Detachable Neck  
Button System  
Consult the dealer or an experienced radio/TV technician for help.  
Note: Changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate equipment.  
Guitar Back  
6
7
 

Beko Washer WMI 61241 User Manual
Belkin Network Router F9K1118 8820 01245 Rev B00 User Manual
Bosch Power Tools Cordless Drill DDH181X 01 User Manual
Broan TV Mount 313WH User Manual
Broil King Electric Grill 9887 14 User Manual
Brother Printer 3450CN User Manual
Bush Hog Brush Cutter GT 48 User Manual
Canon All in One Printer 3748B002 User Manual
Celestron Network Router WR850G User Manual
Chamberlain Garage Door Opener 2580C 1 2 HP User Manual