Car Radio DAB CD SD/MMC MP3
Nashville DAB47
7 647 661 310
Bedienunganleitung
Operating instructions
Mode d’emploi
Istruzioni d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrucciones de manejo
Instruções de serviço
Betjeningsvejledning
Controls
1 Button to switch the device on/off and
; AUD•DEQ button (Audio)
operate the volume mute feature.
Short press: Sets bass, treble, balance
and fader.
Long press: Opens the equalizer
menu.
2
button
to open the flip-release control panel.
3 Volume control.
< SRC button to switch sources between
CD/MP3, SD/MMC, CD changer (if con-
nected) and AUX.
4 BND•TS button.
Short press: Selects the FM memo-
ry banks and the MW and LW wave-
bands, selects the DAB memory bank.
Long press: Starts the FM Travelstore
function and the DAB Travelstore func-
tion.
=
, button to eject the CD from the de-
vice.
> Slot for SD/MMC.
5 DIS•ESC button to change the display
content and close menus without sav-
ing changes.
6 Arrow buttons.
7 MENU•OK button
Short press: Calls up the menus for
basic settings and confirms menu en-
tries.
Long press: Starts the scan function.
8 TRAF button to switch traffic informa-
tion standby on/off.
9 REC•DEL button.
Short press: Starts a recording from
DAB to MMC.
Long press: Deletes the current title in
MMC mode.
: Buttons 1 - 5
59
Contents
Notes and accessories...................... 62 Radio mode ..................................... 76
Road safety................................... 62
Installation.................................... 62
Optional equipment ....................... 62
Activating/deactivating demo mode .. 63
Time-out (time window).................. 63
Disposal of old unit ........................ 63
Detachable control panel ................. 63
Theft protection............................. 63
Detaching the control panel............. 63
Attaching the control panel.............. 64
Switching to radio mode ................. 76
Convenient RDS functions (AF, REG).. 76
Selecting the waveband /
memory bank................................ 77
Tuning into a station ....................... 77
Setting the sensitivity of station
seek tuning ................................... 77
Storing stations ............................. 78
Storing stations automatically
(Travelstore) ................................. 78
Listening to stored stations ............. 78
Scanning receivable stations (SCAN) .. 78
Setting the scanning time................ 79
Programme type (PTY) .................. 79
Optimising radio reception.............. 80
SHARX ......................................... 80
Configuring the display ................... 81
Activating/deactivating the radio
Switching on/off.............................. 64
Adjusting the volume ....................... 65
Setting the power-on volume ........... 65
Quickly reducing the volume (Mute).. 65
Telephone audio/navigation audio .... 66
Setting the volume of
the confirmation beep .................... 66
Automatic sound............................ 67
text display ................................... 81
DAB mode ....................................... 68
Switching to DAB mode .................. 68
Switching regional traffic announce-
ments on/off (DAB TREG) ............... 69
Selecting the memory bank ............. 70
Tuning into ensembles .................... 70
Selecting programmes.................... 71
Scanning receivable DAB
programmes (DAB-SCAN)............... 71
Storing programmes....................... 71
Accessing stored programmes ......... 72
DAB programme type (PTY) ............ 72
Setting the DAB waveband .............. 73
Switching between DAB and FM....... 73
DAB Service following .................... 74
DAB sub-programmes .................... 74
DAB radio text ............................... 74
Setting the length of the programme
names.......................................... 75
Changing the display ...................... 75
Traffic information........................... 82
DAB-FM traffic information source.... 82
Switching traffic information priority
on/off .......................................... 82
Setting the volume for traffic
announcements............................. 82
CD mode ......................................... 83
Switching to CD mode .................... 83
Selecting tracks............................. 84
Fast track selection ........................ 84
Fast searching (audible).................. 84
Random track play (MIX)................. 84
Scanning tracks (SCAN).................. 84
Repeating tracks (REPEAT) ............. 85
Changing the display ...................... 85
Displaying CD text/CD name............ 85
Naming CDs .................................. 86
Traffic announcements in CD mode .. 87
Ejecting a CD................................. 87
60
Contents
Programming your favourite tracks
for an SD/MMC............................ 101
Switching pre-record on/off .......... 101
MP3 mode....................................... 88
Preparing an MP3 CD ..................... 88
Switching to MP3 mode .................. 89
Configuring the display ................... 89
Selecting a directory ...................... 90
Selecting tracks............................. 90
Fast searching
(not in MP3 browse mode) .............. 91
Random track play – MIX
(not in MP3 browse mode) .............. 91
Scanning tracks – SCAN
CD-changer mode .......................... 102
Switching to CD-changer mode...... 102
Selecting CDs.............................. 102
Selecting tracks........................... 102
Fast searching (audible)................ 102
Changing the display .................... 102
Repeating individual tracks or
whole CDs (REPEAT) .................... 103
Random track play (MIX)............... 103
Scanning all tracks on all CDs
(SCAN) ...................................... 103
Naming CDs ................................ 103
CLOCK time................................... 105
Sound ........................................... 106
Adjusting the bass ....................... 106
Adjusting the treble...................... 106
Setting the left/right volume
distribution (balance)................... 107
Adjusting the front/rear volume
(not in MP3 browse mode) .............. 91
Repeating individual tracks or
whole directories – REPEAT
(not in MP3 browse mode) .............. 92
Programming your favourite tracks
on an MP3 CD ............................... 92
SD/MMC mode ................................ 94
Inserting/removing SDs/MMCs ........ 94
Switching to SD/MMC mode............ 94
Configuring the display ................... 94
Selecting a directory ...................... 95
Selecting tracks............................. 95
Fast searching
(not in MP3 browse mode) .............. 96
Random track play – MIX
(not in MP3 browse mode) .............. 96
Scanning tracks – SCAN
(not in MP3 browse mode) .............. 96
Repeating individual tracks or
whole directories – REPEAT
distribution (fader) ...................... 107
X-BASS ......................................... 107
Equalizer....................................... 108
Switching the equalizer on/off ....... 108
Selecting sound presets................ 108
Selecting vehicle presets .............. 108
Manually adjusting the equalizer .... 109
Help adjusting the equalizer .......... 110
(not in MP3 browse mode) .............. 96
Recording DAB programmes onto
SDs/MMCs ................................... 97
Making a timer-controlled recording
of a DAB programme ...................... 99
Playing recordings using the device.. 100
Formatting SDs/MMCs ................. 100
Configuring the display ................. 101
Adjusting the display settings......... 110
External audio sources................... 111
Amplifier....................................... 112
TMC for dynamic navigation
systems ........................................ 112
Specifications ............................... 113
Installation instructions ................. 501
61
Notes and accessories
Installation
Notes and accessories
If you want to install your car sound system
yourself, please read the installation and
connection instructions that follow these
operating instructions.
Thank you for choosing a Blaupunkt prod-
uct. We hope you enjoy using this new piece
of equipment.
Please read these operating instructions
before using the equipment for the first
time.
Optional equipment
Use only accessories approved by
Blaupunkt.
The Blaupunkt editors are constantly work-
ing on making the operating instructions
clearer and easier to understand. However,
if you still have any questions on how to op-
erate the device, please contact your dealer
or the telephone hotline for your country.
You will find the telephone number printed
at the back of this booklet.
DAB antenna
You need a special DAB antenna in order
to operate the Nashville DAB 47. This can
be a separate DAB roof/window antenna or
a DAB/AM/FM combination antenna. You
can obtain further information from your
Blaupunkt dealer.
We provide a manufacturer guarantee for
our products bought within the European
Union. You can view the guarantee condi-
directly at:
Remote control
The RC 08, RC 10, RC 10 H or RC 12 H
(available as optional accessories) remote
control can be used to safely and conven-
iently perform most of the basic functions
of your car sound system.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
31139 Hildesheim
Germany
You cannot switch the device on/off using
the remote control.
Road safety
Amplifiers
Road safety has absolute priority.
Only operate your car sound system if the
road and traffic conditions allow you to do
so. Familiarise yourself with the device be-
fore setting off on your journey. You should
always be able to hear police, fire and am-
bulance sirens in good time from inside
your vehicle. For this reason, listen to your
car sound system at a suitable volume level
during your journey.
You can use all Blaupunkt and Velocity am-
plifiers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 08, IDC A 09 and CDC A 03.
62
Notes and accessories
Control panel
Activating/deactivating demo
mode
You can activate the so-called demo mode
at the device. In demo mode, the different
functions of the device are displayed as
scrolling text.
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
u
Press the MENU•OK button 7.
The display shows the menu.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle – not even in a hid-
ing place.
u
Press and hold the MENU•OK button
7pressed for more than four seconds
while the menu is displayed to activate
or deactivate the demo mode.
The control panel has been designed to be
easy to use.
Time-out (time window)
The device features a time-out function
(time window).
Notes:
For example, if you press the MENU•OK
button 7 and select a menu item, the de-
vice switches back after approx. 16 sec-
onds after the last button activation. The
settings performed are saved.
• Never drop the control panel.
• Never expose the control panel to di-
rect sunlight or other heat sources.
• Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with a
lint-free cloth moistened with clean-
ing alcohol.
Disposal of old unit
Do not dispose of your old unit in the
household trash!
Use the return and collection systems avail- Detaching the control panel
able to dispose of the old device.
u
Press the button 2.
The control panel opens out towards you.
u
Hold the control panel by its right side
and then pull the control panel straight
out of the bracket.
63
Control panel
Notes:
Switching on/off
Switching on/off
• All the current settings are saved.
There are various ways of switching the de-
vice on/off:
• Any CD already inserted in the device
remains there.
Switching on/off using the vehicle
ignition
• The device switches off automatically
after approx. one minute.
The device will switch on/off simultaneous-
ly with the ignition if the device is correctly
connected to the vehicle’s ignition and you
did not switch the device off by pressing
button 1.
Attaching the control panel
u
Hold the control panel at approximately
right angles to the device.
u
Slide the control panel into the device’s
guides that are positioned on the left
and right at the lower edge of the hous-
ing. Pushthecontrolpanelcarefullyinto
the bracket until it clicks into place.
Switching the device on/off using the
detachable control panel
u
Detach the control panel.
The device switches off automatically after
approx. one minute.
u
Flip up the control panel and carefully
press it into the device until it clicks into
place.
u
Attach the control panel again.
The device switches on. The last setting
(radio, CD/MP3, SD/MMC, CD changer or
AUX) will be reactivated.
2.
Switching on/off using button 1
1.
u
To switch on the device, press button
1.
Note:
u
To switch off the device, press and
hold down button 1 for longer than
two seconds.
When attaching the control panel, make
sure you do not press the display.
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD/MP3, SD/MMC, CD changer
or AUX) when the panel is replaced.
The device switches off.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
64
Adjusting the volume
Adjusting the volume
Danger to hearing!
If the power-on volume is set to
maximum, the volume level can be very
high when the device is switched on.
Note:
The internal amplifier can be switched
off. If the loudspeakers do not emit any
sound, please read the section entitled
“Switching the internal amplifier on/
off” in the “Amplifier” chapter.
If the volume was set to maximum before
the device was switched off and the power-
on volume is set to “LAST VOLUME”, the vol-
ume level can be very high when the device
is switched on again.
You can adjust the volume in steps from 0
(off) to 50 (maximum).
Severe damage to your hearing can be
caused in both cases!
To increase the volume,
u
turn the volume control 3 clockwise.
To decrease the volume,
When you have finished making your chang-
es,
u
turn the volume control 3 anti-
clockwise.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Setting the power-on volume
You can set the default volume level at which
the device plays when it is switched on.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “VOLUME” appears on the
display.
u
Briefly press button 1.
“MUTE” appears on the display.
u
Press the MENU•OK button 7 to dis-
play the volume menu.
Cancelling mute
To return to your previously set volume
level,
“ON VOLUME” and the currently set value
are displayed or “LAST VOLUME” is dis-
played.
u
briefly press button 1 again.
u
Adjust the power-on volume using the
buttons 6 .
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you change the setting to “LAST VOLUME”,
the volume when the device switches on will
be the same as the volume level that was set
the last time you switched the device off.
65
Adjusting the volume
u
u
Press the MENU•OK button 7.
Telephone audio/navigation
audio
Press the or button 6repeatedly
until “VOLUME MENU” appears on the
display.
If your car sound system is connected to a
mobile telephone or a navigation system,
the sound system’s volume will be muted as
soon as you “pick up” the phone or as soon
as a navigation announcement is made. You
will then hear the caller or navigation an-
nouncement over the car sound system’s
loudspeakers. In order for this feature to
work, the mobile telephone or navigation
system must be connected to the car sound
system as described in the installation in-
structions.
u
u
Press the MENU•OK button 7 to dis-
play the volume menu.
Press the or button 6repeatedly
until “PHONE/NAVI” appears on the
display.
u
Set your preferred volume level using
the
buttons 6.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
You will need a cable for this with the follow-
ing Blaupunkt number: 7 607 001 503.
You can find out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
Note:
You can use the volume control 3 to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
If the sound system receives a traffic an-
nouncement during a telephone call or
whilst a navigation announcement is be-
ing made, you will only be able to hear the
traffic announcement after the call or navi-
gation announcement is finished (in so far
as the traffic announcement is still being
broadcast). The traffic announcement is
not recorded!
Setting the volume of the
confirmation beep
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can adjust
the volume of this beep.
The volume with which telephone calls or
navigation announcements are broadcast
can be adjusted.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VOLUME MENU” appears on the
display.
u
Press the MENU•OK button 7 to dis-
play the volume menu.
66
Adjusting the volume
u
u
Press the or button 6 repeat-
edly until “BEEP VOL” appears on the
display.
Note:
The optimum setting for the speed-
dependent volume adjustment feature
depends on how noise levels develop in
your particular vehicle. You will need to
test various settings in order to find out
which is best suited to your vehicle.
Adjust the volume using the
but-
tons 6. “0” means that the beep is
deactivated, “6” means that the maxi-
mum beep volume is set.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Automatic sound
This feature automatically adjusts the vol-
ume of the car sound system to suit the
speed at which the vehicle is travelling. In
order for this to work, your car sound sys-
tem must be connected as described in the
installation instructions.
You can adjust the automatic volume boost
feature in six steps from (0 to 5).
u
u
Press the MENU•OK button 7.
Press the button 6 repeatedly until
“VOLUME MENU” appears on the dis-
play.
u
u
Press the MENU•OK button 7 to dis-
play the volume menu.
Press the or button 6repeatedly
until “AUTO SOUND” appears on the
display.
u
Set the volume adjustment level using
the
buttons 6.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
67
DAB mode
NEWS
DAB mode
News reports (NEWS) are provided in ad-
dition to the traffic announcements. If you
wish, you can allow the news reports to be
played. If the “DAB NEWS ON” setting is ac-
tivated, the current programme will be in-
terrupted when a news report arrives, and
the report will be played. At the end of the
news report, the radio returns to the pro-
gramme that you were listening to before.
You can enjoy radio in digital audio quality
thanks to DAB (Digital Audio Broadcast).
Note:
You need a special DAB antenna in or-
der to operate the Nashville DAB 47.
This can be a separate DAB roof/win-
dow antenna or a DAB/AM/FM com-
bination antenna. You can obtain fur-
ther information from your Blaupunkt
dealer.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
Switching to DAB mode
If you are in Radio, CD/MP3, SD/MMC, CD-
changer or AUX mode,
u
Press the or button 6 repeated-
ly until “DAB NEWS ON” or “DAB NEWS
OFF” appears on the display.
u
press the SRC button < repeatedly
until “DAB” appears on the display.
If you want to receive news reports, select
“DAB NEWS ON”. If you do not want to listen
to news reports, select “DAB NEWS OFF”.
In contrast with standard radio broadcast-
ing, several programmes are always broad-
cast over the same frequency for DAB.
These programmes are arranged in “en-
sembles”. An ensemble always contains
several programmes.
u
Select the setting that you want using
the buttons 6.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
In turn, a programme can additionally con-
tain up to twelve sub-programmes. In the
case of a sports station, for instance, vari-
ous sports events can be broadcast simul-
taneously as sub-programmes. If a pro-
gramme has sub-programmes, you will see
a “ ” displayed in front of the programme
name.
WEATHER
Weather reports (WEATHER) are provided
in addition to the traffic announcements.
If you wish, you can allow the weather re-
ports to be played. If the “DAB WEAT ON”
setting is activated, the current programme
will be interrupted when a weather report
arrives, and the report will be played. At the
end of the weather report, the radio returns
to the programme that you were listening to
before.
DAB also offers further advantages:
68
DAB mode
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
ten to sports reports, select “DAB SPORT
OFF”.
u
Select the setting that you want using
the buttons 6.
u
Press the or button 6 repeated-
ly until “DAB WEATHER OFF” or “DAB When you have finished making your chang-
WEATHER ON” appears on the display. es,
If you want to receive weather reports, se-
lect “DAB WEAT ON”. If you do not want
to listen to weather reports, select “DAB
WEAT OFF”.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Note:
u
Select the setting that you want using
the buttons 6.
You can interrupt a news, weather or
sports report whilst it is being played
by pressing the TRAF button 8. The
general priority settings are retained
and the next report will be played when
it arrives.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Switching regional traffic
announcements on/off
(DAB TREG)
Since DAB frequencies are broadcast over
a large area of the country, the situation
might arise in which you receive traffic an-
nouncements that are not relevant to your
region.
SPORT
Sports reports are provided in addition to
the traffic announcements, news reports
and weather reports. If you wish, you can
allow the sports reports to be played. If
the “DAB SPORT ON” setting is activated,
the current programme will be interrupted
when a sports report arrives, and the re-
port will be played. At the end of the news
report, the radio returns to the programme
that you were listening to before.
In order to avoid this, the DAB transmitter
service areas are divided into regions.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
u
Press the or button 6 repeated-
ly until “DAB TREG OFF” or “DAB TREG
ON” appears on the display.
u
Press the or button 6repeatedly
until “DAB SPORT ON” or “DAB SPORT
OFF” appears on the display.
If you want to receive announcements that
apply to specific regions, select “DAB TREG
ON”. If you only want to receive non-regional
announcements, select “DAB TREG OFF”.
If you want to receive sports reports, select
“DAB SPORT ON”. If you do not want to lis-
69
DAB mode
u
Select the setting that you want using
the buttons 6.
Tuning into ensembles
With DAB, several programmes broad-
casted over the same frequency are always
combined into an “ensemble”.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Note:
Since various programmes from differ-
ent ensembles are stored automatically
in the DT memory bank, you cannot use
the functions described here for tuning
into an ensemble whilst the DT memory
bank is activated.
Note:
Since this function is not supported by
all broadcasters, it is possible that you
will not receive any traffic announce-
ments if the TA-REG function is activat-
ed. If you do not receive any traffic an-
nouncements over an extended period
of time, please deactivate the TA-REG
function.
Selecting an ensemble
You can directly select ensembles that you
have received once already (for this to work,
the ensemble must be receivable).
u
Briefly press the or button 6.
Selecting the memory bank
This device lets you store DAB programmes
in four memory banks (D1, D2, D3 and
DT).
The name of the next or previous known en-
semble is displayed. The first available pro-
gramme in the ensemble is played.
Ensemble seek tuning
You can find new ensembles using seek tun-
ing.
Five programmes can be stored in each
memory bank.
u
Briefly press the BND•TS button 4 to
switch between the memory banks.
u
Forseektuningdownwardsorupwards,
press and hold down the or button
6 for longer than two seconds.
Notes:
• If there are no programmes stored in
the DT memory bank yet, this memo-
ry bank will not be displayed. In this
case, first start a Travelstore (see
“Storing programmes”).
The radio tunes into the next receivable en-
semble. The ensemble name is displayed
briefly. The first available programme in the
ensemble is played.
• You cannot select the DT memory
bank if the PTY function is activated.
70
DAB mode
Manually tuning an ensemble
You can also tune into ensembles manually.
Stopping DAB-SCAN and continuing
listening to a programme
Press the MENU•OK button 7.
Scanning stops and the radio continues
playing the programme that it tuned into
last. If you cancel the DAB-SCAN whilst
“SCANNING...” is being displayed, the ra-
dio will retune to the programme you were
listening to last.
u
u
Press the or button 6during seek
tuning.
u
You can now tune the radio manually
using the or button 6.
Selecting programmes
After you have tuned into an ensemble, you
can select a programme from the ensem-
ble.
Storing programmes
u
Select a programme from the ensemble
using the buttons 6.
Storing programmes manually
u
Select the memory bank that you
want.
Scanning receivable DAB
programmes (DAB-SCAN)
You can use the scan function to play all the
receivable programmes briefly.
u
u
Tune into the ensemble that you want.
Select the programme that you want to
store.
u
Press and hold down one of the station
buttons 1 - 5 : for longer than two
seconds to assign the programme to
that button.
Starting DAB-SCAN
u
In DAB mode, press and hold down the
MENU•OK button 7 for longer than
two seconds.
Storing programmes automatically
(Travelstore)
Note:
The Travelstore function stores the first
five receivable programmes in alphabeti-
cal order and you can access them directly
using the station buttons. All the other pro-
grammes that were stored in the “DT” mem-
ory bank during the Travelstore scan can be
accessed alphabetically by pressing the
6 buttons. You can switch rapidly
You cannot use the DAB scan function
whilst the DT memory bank is activat-
ed.
Scanning begins. The name of the current
programme appears in the top line and the
name of the current ensemble appears in
the bottom line. “SCANNING...” appears on
the display whilst the radio switches to the
next ensemble.
between the programmes if you press and
hold down the
buttons 6 for longer
than two seconds.
71
DAB mode
Notes:
Switching DAB-PTY on/off
• Any programmes that were previ-
ously stored in this memory bank are
deleted in the process.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
• You cannot use the DAB Travelstore
feature if the PTY function is acti-
vated.
u
u
Press the or button 6repeatedly
until “DAB PTY ON” or “DAB PTY OFF”
appears on the display.
u
Press and hold down the BND•TS but-
ton 4 for longer than two seconds.
Press the or button 6 to switch
DAB-PTY ON or OFF.
The storing procedure begins.
When you have finished making your chang-
es,
“TRAVELSTORE PLEASE WAIT” appears on
the display. After the process is completed,
the programme that is stored in location 1
of the “DT” memory bank will be played.
“NO LIST” appears on the display if no pro-
grammes were found during the Travelstore
scan.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Selecting a programme type and
starting seek tuning
u
Press the or button 6.
Accessing stored programmes
The current programme type appears brief-
ly on the display. If you do not make a selec-
tion whilst this display is visible, the normal
DAB display will be used again.
u
Select the memory bank.
u
Press the station button 1 - 5 :.
DAB programme type (PTY)
u
If you want to select another pro-
gramme type, you can do so by press-
ing the or button 6 whilst this
display is visible.
Besides transmitting the station name, an
increasing number of stations also provide
information on the type of programme that
they are broadcasting. Your car radio can
receive and display this information.
Or
u
Press one of the buttons 1 - 5 : to se-
lect a programme type that is assigned
to one of these buttons.
For example, the programme types can be:
CULTURE
SPORT
TRAVEL
NEWS
JAZZ
POP M
EASY M
The selected programme type appears
briefly on the display.
ROCK M
DRAMA
u
Press the or button 6 to start
seek tuning.
You can use the PTY function to select sta-
tions of a particular programme type.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.
72
DAB mode
Assigning a programme type to a station
button
Switching between DAB and FM
You can select various settings for switching
between DAB and FM radio mode. It might
be necessary to switch between DAB and
FM radio if the DAB or FM reception quality
decreases severely.
u
Select a programme type using the or
button 6.
u
Press and hold the desired station but-
ton 1 - 5 : for longer than two sec-
onds.
If you select the “DAB-FM-AUTO” setting,
the device automatically tunes into the FM
frequency of the programme currently be-
ing received (if the programme can be re-
ceived on FM), or it tunes into the DAB pro-
gramme of the FM station that is currently
tuned (if the station is available as a DAB
programme).
The programme type is stored on the se-
lected button 1 - 5 :.
Setting the DAB waveband
With the Nashville DAB47, you can re-
ceive DAB programmes and ensembles
on the following wavebands: “Band 3”
(174 - 240 MHz) and “L-Band” (1452 -
1491 MHz). Since some countries do not
use both wavebands, you can speed up
seek tuning by excluding the waveband that
is not supported.
With “DAB-FM-MANUAL”, the device
switches to the FM frequency of the DAB
programme being received if you manu-
ally call up the FM radio mode (if the pro-
gramme can be received on FM).
If you set “DAB-FM OFF”, the FM station
that you listened to last will be played when
you switch to FM radio mode (if the station
can be received).
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
u
Press the or button 6 repeat-
edly until “DAB-BAND L”, “DAB-BAND
3” or “DAB-BAND BOTH” appears on
the display.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
u
Press the or button 6 repeat-
edly until “DAB-FM AUTO”, “DAB-FM
MANUAL” or “DAB-FM OFF” appears on
the display.
u
Press the or button 6 to switch
between the settings.
If “DAB-BAND L” or “DAB-BAND 3” is set,
only the selected waveband will be used. If
“DAB-BAND BOTH” is set, both wavebands
will be used.
u
Press the or button 6 to switch
between the settings.
When you have finished making your chang-
es,
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
73
DAB mode
Selecting sub-programmes
DAB Service following
To switch between the sub-program-mes of
a programme that you are tuned into, you
must first switch to sub-programme mode,
If the reception quality of the programme
being received decreases, the Nashville
DAB47 can automatically tune to the pro-
gramme in another ensemble (if available).
For this feature to work, the “service follow-
ing” function must be activated.
u
press and hold down the button 6
for longer than two seconds.
SC will be displayed at the left edge of the
display to indicate that you are currently in
sub-programme mode.
Switching service following on/off
To use service following,
The name of the sub-programme is dis-
played in the bottom display line.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
To switch between the sub-programmes,
u
briefly press the or button 6.
u
u
Press the or button 6repeatedly
until “DAB SF ON” or “DAB SF OFF” ap-
pears on the display.
The radio tunes into the next or previous
sub-programme and then exits the sub-pro-
gramme mode.
Press the or button 6 to switch
between the settings.
Note:
When you have finished making your chang-
es,
Sub-programmes are so far only sup-
ported by a few broadcasters.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
DAB radio text
In addition to their programmes, some sta-
tions broadcast additional information (e.g.
news) as scrolling text on the display.
If Service following is activated, the RDS
symbol is displayed during DAB mode.
Service following is deactivated when the
RDS symbol disappears.
Note:
Since displaying radio texts can dis-
tract you from the current road and
traffic situation, we ask you kindly to
deactivate the “DAB radio text” func-
tion or to use it only whilst the vehicle
is stationary.
DAB sub-programmes
Some DAB programmes contain sub-pro-
grammes. Programmes that contain sub-
programmes are marked with a “ ” in front
of the programme name. If a programme
contains sub-program-mes, you can tune
into them.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, todis-
play the DAB menu.
74
DAB mode
u
u
Press the or button 6 repeat-
edly until “R-TXT ON” or “R-TXT OFF”
appears on the display.
Changing the display
You can choose from various display op-
tions in DAB mode:
Press the or 6 to switch between
“RADIO TXT ON” and “RADIO TXT
OFF”.
•
“NORMAL MODE”:
First line: memory bank, programme
name and memory location, if available.
Second line: Ensemble name.
When you have finished making your chang-
es,
•
“CLOCK MODE”:
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
First line: memory bank, programme
name and memory location, if available.
Second line: Ensemble channel, clock
time.
Setting the length of the
programme names
•
“MINIMAL MODE”:
Firstline:memorybankandprogramme
name.
Most programmes use programme names
that are 8 characters long (as you are al-
ready familiar with from RDS). Some pro-
grammes use names that are 16 characters
long, which cannot be displayed in one go.
If a programme uses names that are 16
characters long, you can either limit the
name to eight characters or display the 16-
character name as scrolling text.
u
Press the DIS•ESC button 5 repeat-
edly until the desired display mode is
shown.
u
u
Press the MENU•OK button 7.
Press the MENU•OK button 7, to dis-
play the DAB menu.
u
u
Press the or button 6repeatedly
until “SRV NAME 8” or “SRV NAME 16”
appears on the display.
Press the or button 6 to switch
between “SRV NAME 8” (8-digit dis-
play) and “SRV NAME 16” (16-digit
display).
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
75
Radio mode
Note:
Radio mode
REGIONAL must be activated/deacti-
vated separately in the menu.
This device is equipped with an RDS radio
receiver. Many of the receivable FM stations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
Switching REGIONAL on/off
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
u
The station name appears on the display as
soon as the tuner receives it.
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
Press the or button 6 repeated-
ly until “REG” appears on the display.
“OFF” or “ON” is displayed alongside
“REG”.
Switching to radio mode
If you are in CD/MP3, SD/MMC, CD-chang-
er or AUX mode,
u
u
To switch REGIONAL on/off, press the
or button 6.
u
or
press the BND•TS button 4.
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
u
press the SRC button < repeatedly
until “TUNER” appears on the display.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
Switching the RDS function on/off
If you want to use the RDS functions (AF
and REGIONAL),
u
press the MENU•OK button 7.
“TUNER MENU” appears on the display.
•
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
“RDS ON” or “RDS OFF” appears on the dis-
play.
•
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
u
To switch RDS on/off, press the or
button 6.
u
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
The convenient RDS functions are active if
the RDS appears on the display.
76
Radio mode
Browsing through broadcasting
Selecting the waveband /
memory bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called “broadcasting net-
work”.
Note:
The RDS function must be activated be-
fore you can use this feature.
Five stations can be stored in each memory
bank.
u
Press the or button 6 to switch
to the next station on the broadcasting
network.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
Note:
u
briefly press the BND•TS button 4.
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u
Press the or button 6.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
u
Press the MENU•OK button 7.
Note:
“TUNER MENU” appears on the display.
You can only tune into stations manu-
ally if the RDS function is deactivated.
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
u
Press the or button 6.
Press the or button 6repeatedly
until “SENS” appears on the display.
The display shows the currently set sensitiv-
ity level. “SENS HI3” means that the tuner is
set to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sensitiv-
ity setting.
77
Radio mode
u
Set the sensitivity level that you want “TRAVEL STORE PLEASE WAIT” appears
using the
buttons 6.
on the display. After the process has com-
pleted, the radio will play the station that
is stored in memory location 1 of the FMT
memory bank.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Listening to stored stations
u
Select the memory bank or waveband.
Note:
u
Press the station button 1 - 5 : of the
You can set different sensitivity levels
for FM and MW or LW (AM).
desired station.
Scanning receivable stations
(SCAN)
Storing stations
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time from 5 to 30 seconds in the
menu in increments of five seconds.
Storing stations manually
u
Select the memory bank that you want
(FM1, FM2, FMT) or one of the wave-
bands (MW or LW).
u
Tune into the station that you want.
Press and hold down one of the station
buttons 1 - 5 :, for longer than two
seconds to assign the station to that
button.
Starting SCAN
u
Press and hold down the MENU•OK
button 7 for longer than two sec-
onds.
Scanning begins. “SCAN” appears briefly
on the display followed by a display of the
current station name or frequency.
Storing stations automatically
(Travelstore)
You can automatically store the five sta-
tions offering the strongest reception in the
region (only FM). The stations are stored in
the FMT memory bank.
Cancelling SCAN and continuing
listening to a station
u
Press the MENU•OK button 7.
Scanning stops and the radio continues
playing the station that it tuned into last.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
u
Press and hold down the BND•TS but-
ton 4 for longer than two seconds.
The storing procedure begins.
78
Radio mode
PTY-EON
Setting the scanning time
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
u
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
u
u
u
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
Notes:
• If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and “NO PTY” appears briefly on the
display. The radio will then retune to
the station that it received last.
Press the MENU•OK button 7 to dis-
play the menu. “SCAN TIME” and the
currently set time are displayed.
Set the scanning time that you want us-
ing the
buttons 6.
When you have finished making your chang-
es,
• If the tuned radio station or another
station on the broadcasting network
broadcasts your selected programme
type at a later point in time, the radio
will automatically switch from the cur-
rently tuned station or from CD/MP3
mode or CD-changer mode to the sta-
tion whose programme type matches
the one you selected.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Note:
The scanning time that you set is also
applied by the system to scanning car-
ried out in CD/MP3, MMC, DAB and
CD-changer mode.
Switching PTY on/off
Note:
Programme type (PTY)
The PTY functions can only be activated
if the “DAB-FM” function is deactivated
(DAB-FM OFF). For further informa-
tion, please read the section entitled
“Switching between DAB and FM” in
the “DAB mode” chapter.
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
u
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
CLASSICS
You can use the PTY function to select sta-
tions of a particular programme type.
Press the or button 6repeatedly
until “PTY” appears on the display with
the current setting.
79
Radio mode
u
u
Press the or button 6 to switch
PTY ON or OFF.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves reception
during poor radio reception (only FM). If
reception interferences are present, the in-
terference level is automatically reduced.
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Selecting a programme type and
starting seek tuning
u
Press the or button 6.
Switching HICUT on/off
The programme type that you selected last
appears on the display.
u
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
u
If you want to select another pro-
gramme type, you can do so by press-
ing the or button 6 whilst this
display is visible.
u
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
Press the or button 6repeatedly
until “HICUT” appears on the display.
Or
u
Press the or button 6 to adjust
the HICUT setting.
Press one of the buttons 1 - 5 : to se-
lect a programme type that is assigned
to one of these buttons.
“HICUT 0” means that no automatic reduc-
tion of the interference level will be made;
“HICUT 2” means that a maximum reduc-
tion will be made.
The selected programme type appears
briefly on the display.
u
Press the or button 6 to start
seek tuning.
u
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.
SHARX
The SHARX function allows you to largely
avoid interference caused by neighbour-
ing radio stations (FM only). Switch on the
SHARX function if the density of radio sta-
tions in your area is very high.
Assigning a programme type to a station
button
u
Select a programme type using the or
button 6.
u
Press and hold the desired station but-
ton 1 - 5 : for longer than two sec-
onds.
The programme type is stored on the se-
lected button 1 - 5 :.
80
Radio mode
Switching SHARX on/off
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
Activating/deactivating the
u
radio text display
Some stations use the RDS signal to broad-
cast scrolling texts known as radio texts.
You can allow radio texts to be displayed or
you can block them.
u
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
Press the or button 6repeatedly
until “SHARX” appears on the display.
Since displaying radio texts can distract you
from the current road and traffic situation,
we ask you kindly to deactivate the “radio
text” function or to use it only whilst the ve-
hicle is stationary.
Press the or button 6 to switch
SHARX on/off.
“SHARX OFF” means automatic bandwidth
switching is deactivated, “SHARX ON”
means it is activated.
u
Press the MENU•OK button 7.
“TUNER MENU” appears on the display.
u
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
u
u
u
Press the MENU•OK button 7 to dis-
play the tuner menu.
Press the or button 6repeatedly
until “R-TEXT” appears on the display.
Configuring the display
In radio mode, you can choose between
various display modes.
Press the or button 6 to switch
RADIOTEXT on/off.
“R-TEXT OFF” means that no radio texts will
be displayed and “R-TEXT ON” means they
will be displayed.
1. “NORMAL MODE”
First line: Memory bank and sta-
tion name (if it can be received)
Second line: frequency of the selected
station.
u
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
2. “CLOCK MODE”
First line: Memory bank and sta-
tion name (if it can be received)
Second line: frequency of the selected
station and clock time.
3. “MINIMAL MODE”
First line: Memory bank and sta-
tion name (if it can be received)
Second line: No display.
u
Briefly press the DIS•ESC button 5to
switch between the options.
81
Traffic information
• If, while listening to a CD/MP3, SD/
MMC or a CD in the changer, you leave
the reception area of a traffic informa-
tion station that the system is tuned
into and the subsequent automatic
search cannot find a new traffic infor-
mation station.
Traffic information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network.
Whenever a traffic announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffic reports to the appropriate traffic in-
formation station within the broadcasting
network that does.
• If you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
Once the traffic report has been played, the
system will switch back to the programme
that you were listening to before.
If you hear the warning beep, you can ei-
ther switch off traffic information priority
or tune into a station that broadcasts traffic
information.
DAB-FM traffic information
source
Setting the volume for traffic
announcements
If traffic information priority is activated,
the device automatically switches to an in-
coming traffic announcement being broad-
cast via DAB within a DAB broadcasting
network (in DAB mode) or via FM (in radio
mode, see RDS-EON). In AUX, SD/MMC,
CD/MP3 and CD-changer mode, you will
hear traffic announcements played from
the source that was active last (either DAB
or radio).
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VOLUME MENU” appears on the
display.
u
u
Press the MENU•OK button 7 to dis-
play the volume menu.
Press the or button 6 repeat-
edly until “TRAFFIC” appears on the
display.
Switching traffic information
priority on/off
u
u
Adjust the volume using the
but-
tons 6.
u
Press the TRAF button 8.
Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
The priority for traffic announcements is ac-
tivated if the display shows the traffic jam
symbol.
Notes:
Notes:
• Using the volume control 3, you can
also adjust the volume during a traf-
fic announcement for the duration of
that announcement.
You will hear a warning beep:
• If you leave the reception area of a
traffic information station that you
are currently listening to.
82
Traffic information
CD mode
• You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
information, please read the “Sound”
chapter.
CD mode
You can use this device to play standard au-
dio CDs, CD-Rs and CD-RWs with a diame-
ter of 12 cm. To avoid problems when play-
ing CDs, you should not burn CDs at speeds
greater than 16-speed.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on
this device, you can also play CDs contain-
ing MP3 music files. For further informa-
tion, please read the chapter entitled “MP3
mode”.
Risk of severe damage to the CD
drive!
CD singles with a diameter of 8 cm and non-
circular contoured CDs (shape CDs) must
not be used.
We accept no responsibility for any damage
to the CD drive that may occur as a result of
the use of unsuitable CDs.
Switching to CD mode
If there is no CD inserted in the drive,
u
switch on the device by pressing but-
ton 1.
u
Press the button 2.
The control panel opens.
u
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
The drive draws in the CD automatically.
83
CD mode
You must not hinder or assist the drive as it
draws in the CD.
Random track play (MIX)
u
Press the 1 MIX button :.
u
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
“MIX CD ON” appears briefly on the dis-
play and the MIX symbol is displayed. The
next randomly selected track will then be
played.
The CD starts playing.
If a CD is already inserted in the drive,
Cancelling MIX
u
press the SRC button < repeatedly
until “CD” appears on the display.
u
Press the 1 MIX button : again.
“MIX CD OFF” appears briefly on the display
and the MIX symbol disappears.
Playback begins from the point at which it
was last interrupted.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Selecting tracks
u
Press one of the arrow buttons 6 to
select the next or previous track.
u
Press and hold down the MENU•OK
button 7for longer than two seconds.
The next track will then be scanned.
If you press the or button 6 once, the
player will play the current track again from
the beginning.
Note:
Fast track selection
You can set the scanning time. For
further information, please read the
section entitled “Setting the scanning
time” in the “Radio mode” chapter.
To quickly select tracks backwards or for-
wards,
u
press and hold down one of the
buttons 6 until fast-reverse/fast-for-
/
Cancelling SCAN and continuing
listening to a track
ward track selection begins.
Fast searching (audible)
To end the scanning process,
To fast search backwards or forwards,
u
press MENU•OK button 7.
u
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
The currently scanned track will then con-
tinue to be played normally.
84
CD mode
Notes:
Repeating tracks (REPEAT)
• In the menu you can configure wheth-
er you want to display the CD text or
the CD name. For further informa-
tion, please read the following sec-
tion entitled “Displaying CD text”.
If you want to repeat a track,
u
press the RPT 4 button :.
“RPT TRK ON” appears briefly on the dis-
play and the RPT symbol is displayed. The
track is repeated continuously until you de-
activate RPT.
• CD text can only be displayed if
the appropriate information is con-
tained on the CD. The CD name can
only be displayed if you have already
named the CD. For further informa-
tion, please read the section entitled
“Naming CDs”.
Cancelling REPEAT
If you want to cancel the repeat function,
u
press the RPT 4 button : again.
“RPT TRK OFF” appears briefly on the
display and the RPT symbol disappears.
Normal playback is then resumed.
To switch between the display options,
u
press the DIS•ESC button 5 once or
several times until the display that you
want appears.
Changing the display
You can choose from various display op-
tions in CD mode:
Displaying CD text/CD name
Some CDs include CD text. The CD text
might contain the names of the artist, al-
bum and tracks.
•
•
“NORMAL MODE”:
First line: Track number
Second line: Playing time
The CD text is displayed in the second line of
the display instead of the CD name. You can
allow the CD text to be displayed as scrolling
text every time you switch to another track.
The default display will appear again after
the whole CD text has been shown once.
For further information, please read the
section entitled “Changing the display”.
“INFO MODE”:
First line: Track number and playing
time.
Second line: CD text or CD name
•
•
“CLOCK MODE”:
First line: Track number and playing
time.
Second line: CD text or CD name and
clock time
“MINIMAL MODE”:
The title number is displayed on the top
line.
85
CD mode
Switching CD text on/off
Entering/editing CD names
u
u
Press the MENU•OK button 7.
u
u
u
Listen to the CD that you want.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “CD TEXT” or “CD NAME” appears
on the display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
u
Use the
buttons 6 to switch be-
tween the “CD TEXT” and “CD NAME”
options.
u
Press the MENU•OK button 7.
You will now enter editing mode. If your CD
does not have a name yet, “ABCDEFGH” ap-
pears on the display.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and The first text input position flashes.
then the DIS•ESC button 5 to exit the
u
Use the
/
buttons 6 to select the
menu.
character that you want. If you want an
empty space, simply select the under-
score.
Scrolling CD text
If the CD that is inserted in the drive con-
tains CD text, you can make the system
display the text as scrolling text during play-
back.
u
Use the or button 6 to move from
one text input position to another.
When you have finished making your chang-
es,
u
Briefly press the 5 SCL button :.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Naming CDs
The car sound system allows you to assign
names for up to 30 CDs so that you can rec-
ognise them more easily. The names can be
up to eight characters long.
“CD NAME FULL” will appear on the display
if you try assigning more than 30 names.
Deleting a CD name
u
Listen to the CD whose name you want
to delete.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
u
Press the MENU•OK button 7.
86
CD mode
u
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
Traffic announcements in CD
mode
If you wish to receive traffic announcements
in CD mode,
u
u
Press the MENU•OK button 7.
Press and hold down the MENU•OK
button 7. After approx. four sec-
onds you will hear a beep and “DELETE
NAME” appears on the display.
u
press the TRAF button 8.
The priority for traffic announcements is ac-
tivated if the display shows the traffic jam
symbol. For further details, please read the
chapter entitled “Traffic information”.
u
Release the MENU•OK button 7.
The CD name will be deleted.
Ejecting a CD
u
You can return to the menu by pressing
the MENU•OK button 7.
u
Press the button 2.
The control panel opens out towards you.
Deleting all CD names
You can delete all the CD names stored in
the car sound system.
u
Press the eject button = next to the
CD compartment.
The CD is ejected.
u
u
u
Listen to a CD.
Remove the CD and close the control pan-
el.
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
Note:
• If a CD is ejected, the drive will auto-
matically draw it back in again after
approx. 10 seconds.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
• You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.
u
u
Press the MENU•OK button 7.
Press and hold down the MENU•OK
button 7. After four seconds you will
hear a beep and “DELETE NAME” ap-
pears on the display. Continue holding
the button pressed down until you hear
a second beep and “DELETE ALL” ap-
pears on the display.
u
Release the MENU•OK button 7.
The CD names will be deleted.
87
MP3 mode
MP3 mode
D01
You can also use this car sound system to
play CD-Rs and CD-RWs that contain MP3
music files.
A
D02
D03
Preparing an MP3 CD
D04
The various combinations of CD burners,
CD burning software and CD blanks may
lead to problems arising with the device’s
ability to play certain CDs. If problems oc-
cur with your own burned CDs, you should
try another brand of CD blank or choose an-
other colour of CD blank. To avoid problems
when playing CDs, you should not burn CDs
at speeds greater than 16-speed.
T001
T001
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
B
T001
T002
T003
T004
T005
T006
The format of the CD must be ISO 9660
Level 1 / Level 2 or Joliet. Other formats
cannot be played reliably.
You can create a maximum of 254 directo-
ries on a CD. You can use this device to ac-
cess each of these directories.
A
B
Directories
Tracks · Files
Each directory can contain up to 255 files.
You can name each directory using a PC.
The device is capable of displaying the di-
rectory name. Name the directories and
tracks/files using your CD burner software.
The software’s instruction manual will pro-
vide details on how to do this.
Note:
When naming directories and tracks/
files you should avoid using accents
and special characters. You can use
a maximum of 32 characters (includ-
ing the “.MP3” file extension) for track
names and directory names.
88
MP3 mode
If you like your files to be in the correct or-
der, you should use burner software that
places files in alphanumerical order. If your
software does not provide this feature you
also have the option of sorting the files
manually. For this purpose, you must en-
ter a number in front of each file name, e.g.
“001”, “002”, etc. The leading zeros must
also be entered.
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled “Switching
to CD mode” in the “CD mode” chapter.
Configuring the display
Configuring the default display
You can display various types of informa-
tion on the current track:
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
1. “NORMAL MODE”:
First line: Track name
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 kbits/sec.
Second line: Directory name
2. “INFO MODE”:
First line: Track name.
This device can only play MP3 files that
have the “.MP3” file extension.
Second line: MP3-ID-TAG (if available
and activated, see “Selecting MP3
info”)
Notes:
To ensure uninterrupted playback,
Note:
• do not try changing the file extension
to “.MP3” of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
The system can display MP3-ID tags
(version 1) if they have been saved with
the MP3 files (for further information,
please read the instructions that came
with your PC’s MP3 software or burner
software).
• Do not use “mixed” CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
3. “MP3 BROWSE MODE”:
First line: Track name
Second line: Directory name.
• Do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-mode
CD, the device will only play the CD-
audio tracks.
Note:
You can use MP3 browse mode to find
MP3 files on your CD quickly and con-
veniently. The functions Fast search-
ing, MIX, SCAN and REPEAT as well
as the menu cannot be used in MP3
browse mode.
89
MP3 mode
4. “TRACK AND DIR MODE”:
First line: Directory number and track
number.
Selecting the directory in browse mode
You can display the current and subsequent
directory in both lines of the display. The di-
rectories are displayed with the names that
you created when burning the CD. Whilst
the directories are being displayed, you can
use the arrow buttons to display and select
all the available directories.
Second line: Playing time.
5. “CLOCK MODE”
:
First line: Directory number and track
number.
Second line: Directory name and clock
time
u
During MP3 playback, press the
DIS•ESC button 5 repeatedly until
“MP3 BROWSE MODE” appears on the
display.
To switch between the different display op-
tions,
u
press the DIS•ESC button 5.
u
u
Press the or button 6 to display
the directories on the CD.
Selecting a directory
If you want to select a directory, press
Selecting a directory using the arrow
buttons (Normal, info, track and dir and
clock mode)
one of the
/
buttons 6 repeat-
edly until the directory is shown in the
top line of the display and then press
the MENU•OK 7.
To move up or down to another directory,
The selected directory opens and the first
track starts playing. The tracks contained
in the directory are displayed in browse
mode.
u
press the or button 6 once or
several times.
Note:
The device will automatically skip any
directories that do not contain MP3
files. The device will automatically cor-
rect the number of directories for the
display. This number might therefore
no longer be identical to the number of
directories that you actually created.
Selecting tracks
Selecting tracks/files using the arrow
buttons (Normal, info, track and dir and
clock mode)
To move up or down to another track/file in
the current directory,
u
press the or button 6 once or
several times.
If you press the button 6 once, the cur-
rent track will be played again from the be-
ginning.
90
MP3 mode
Selecting tracks in browse mode
Cancelling MIX
Browse mode conveniently allows you to To cancel MIX,
view the tracks contained in a directory and
u
briefly and repeatedly press the 1 MIX
: button until “MIX OFF” appears on
the display.
then select a particular track.
u
During MP3 playback, repeatedly press
the DIS•ESC button 5 until “MP3
BROWSE MODE” is displayed.
The MIX symbol disappears.
u
Press the or button 6 to display
all the tracks contained in the directory
one after another.
Scanning tracks – SCAN
(not in MP3 browse mode)
You can scan (briefly play) all the tracks on
the CD.
If you want to select the currently displayed
title,
u
Press and hold down the MENU•OK
button 7for longer than two seconds.
The next track will then be scanned.
u
press the MENU•OK button 7.
Fast searching
(not in MP3 browse mode)
To fast search backwards or forwards,
“SCAN” and the selected display mode
appear alternately on the display (see
“Configuring the display”).
u
press and hold down the or button
6until fast searching backwards / for-
wards begins.
Note:
You can set the scanning time. For fur-
ther information on setting the scan-
ning time, please read the section en-
titled “Setting the scanning time” in the
“Radio mode” chapter.
Random track play – MIX
(not in MP3 browse mode)
To play the tracks in the current directory in
random order,
Cancelling SCAN and continuing
listening to a track
Press the MENU•OK button 7.
The currently scanned track will then con-
tinue to be played normally.
u
briefly press the 1 MIX button :.
u
“MIX DIR” appears on the display and the
MIX symbol is displayed.
To play the tracks contained in all the direc-
tories on the inserted MP3 CD in random
order,
u
press the 1 MIX button :.
“MIX CD” appears on the display and the
MIX symbol is displayed.
91
MP3 mode
When you have finished making your chang-
es,
Repeating individual tracks or
whole directories – REPEAT
(not in MP3 browse mode)
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
To play the current track repeatedly,
u
briefly press the 4 RPT button :.
Displaying scrolling text
“REPEAT TRACK” and RPT appear briefly on
the display.
The selected information title, track names
or file name and directory name are shown
once as scrolling text when the title chang-
es. To display the information again as
scrolling text,
To repeat the whole directory,
u
press the 4 RPT button : again.
“REPEAT DIR” appears briefly on the dis-
play.
u
briefly press button 5 SCL :.
Cancelling REPEAT
To stop the current track or current direc-
tory from being repeated,
Programming your favourite
tracks on an MP3 CD
Using the TPM function (Track Program
Memory), you can program and play up to
192 favourite tracks for a maximum of 3
CDs or MMCs. You can program the tracks
in any order you like, however, the tracks
will always be played in ascending order. If
you have activated the favourite track (TPM)
feature, only the previously programmed
tracks on the current MP3 CD/SD/MMC will
be played.
u
briefly and repeatedly press the 4 RPT
button : until “REPEAT OFF” appears
on the display.
RPT disappears from the display.
Selecting MP3 info
If you want to select the “MP3 INFO” display
mode, you first have to activate this func-
tion in the menu. In order for the system
to be able to display MP3 information, the
information must be stored on the CD in the
form of ID tags together with the MP3 files.
Programming favourite tracks
To program your favourite tracks for a CD,
proceed as follows:
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
u
u
Select your first favourite track.
Press and hold down the TPM 2 button
: for longer than two seconds.
u
u
Press the MENU•OK button 7.
“TRACK STORED” appears on the display.
The track has now been added to the list of
favourite tracks for this CD.
Press the or button 6 repeat-
edly until “MP3 INFO” appears on the
display.
u
Continue in the same way for all your re-
maining favourite tracks on the CD.
u
Use the
buttons 6 to switch be-
tween the “ON” and “OFF” options.
92
MP3 mode
Switching TPM on/off
Deleting all the lists for all CDs
To switch the TPM function on/off,
You can delete all the stored tracks for all
the CDs.
u
press the TPM 2 button : repeatedly
until “TPM ON” or “TPM OFF” appears
on the display.
u
Press and hold down the 3 CLR button
: for longer than eight seconds until
you have heard all three confirmation
beeps.
If no tracks are programmed, an appropri-
ate notification will be displayed.
The display shows “DELETING”, followed
by “ALL CLEARED”, and all lists of all CDs
are deleted.
Deleting individual tracks from a list
You can delete individual tracks from a list
of favourite tracks.
u
Listen to the track that you want to de-
lete from the list.
u
Press and hold down the 3 CLR button
: for longer than two and less than
four seconds until you hear a confirma-
tion beep.
The display shows “TRACK CLEARED” and
the title is deleted.
Delete list of inserted CD
You can delete all stored tracks of the cur-
rent CD.
u
Press and hold down the 3 CLR button
: for longer than four and less than
eight seconds until you hear a double
confirmation beep.
The display shows “CD CLEARED” and the
list of the CD is deleted.
93
SD/MMC mode
u
u
Carefully pull the SD/MMC out of the
slot.
SD/MMC mode
You can play files stored on an SD/MMC
(Multi-Media Card / Secure Digital) using
the Nashville DAB47. You can write data
onto the SD/MMC that you want to use
with the Nashville DAB47 with the help of
a standard SD/MMC card reader and your
PC.
Attach the control panel again.
Switching to SD/MMC mode
u
Press the SRC button < repeatedly
until “MMC” appears on the display.
Playback begins with the first track that the
device detects.
Note:
Please note that when you prepare the
SD/MMC, you must observe the direc-
tory structure rules as described in the
“MP3 mode” chapter.
Configuring the display
Configuring the default display
You can display various types of informa-
tion on the current track:
In order to optimise the device’s access to
the data on the SD/MMC, you should store
no more than 20 directories and a maxi-
mum of 200 files on an SD/MMC.
1. “NORMAL MODE”:
First line: Track name
Second line: Directory name
Inserting/removing SDs/MMCs
2. “INFO MODE”:
First line: Track name.
The SD/MMC slot is located on the left be-
low the CD compartment. To insert/remove
an MMC, you must first detach the control
panel. To do so, please read the “Detachable
control panel” chapter.
Second line: MP3-ID-TAG (if available
and activated, see “Selecting MP3
info”) or directory name.
Note:
The system can display MP3-ID tags
(version 1) if they have been saved with
the MP3 files (for further information,
please read the instructions that came
with your PC’s MP3 software or burner
software).
Inserting the SD/MMC
u
u
Detach the control panel.
Insert the SD/MMC with its labelled
side uppermost and its contacts first
into the SD/MMC slot until you feel the
SD/MMC click into place.
3. “MP3 BROWSE MODE”:
First line: Directory name
Second line: Track name.
u
Attach the control panel again.
Removing an SD/MMC
Note:
u
u
Detach the control panel.
You can use MP3 browse mode to find
MP3 files on your CD quickly and con-
veniently. The functions Fast search-
ing, MIX, SCAN and REPEAT as well
Carefully push the SD/MMC into the de-
vice until you feel a slight resistance.
The SD/MMC is now unlatched.
94
SD/MMC mode
as the menu cannot be used in MP3 being displayed, you can use the arrow but-
browse mode.
tons to display and select all the available
directories.
4. “TRACK AND DIR MODE”:
First line: Directory number and
directory number.
u
During MP3 playback, press the
DIS•ESC button 5 repeatedly until
“MP3 BROWSE MODE” appears on the
display.
Second line: Playing time.
5. “CLOCK MODE”:
First line: Directory number and
track number.
Second line: Directory name and clock
time
u
u
Press the or button 6 to display
the directories on the CD.
If you want to select a directory, press
one of the
/
buttons 6 repeat-
To switch between the different display op-
tions,
edly until the directory is shown in the
top line of the display and then press
the MENU•OK button 7.
u
press the DIS•ESC button 5.
The selected directory opens and the first
track starts playing. The tracks contained
in the directory are displayed in browse
mode.
Selecting a directory
Selecting a directory using the arrow
buttons (Normal, info, track and dir and
clock mode)
Selecting tracks
To move up or down to another directory,
Selecting tracks/files using the arrow
buttons (Normal, info, track and dir and
clock mode)
u
press the or button 6 once or
several times.
Note:
To move up or down to another track/file in
the current directory,
The device will automatically skip any
directories that do not contain MP3
files. The device will automatically cor-
rect the number of directories for the
display. This number might therefore
no longer be identical to the number of
directories that you actually created.
u
press the or button 6 once or
several times.
If you press the button 6 once, the cur-
rent track will be played again from the be-
ginning.
Selecting tracks in browse mode
Selecting the directory in browse mode
Browse mode conveniently allows you to
view the tracks contained in a directory and
then select a particular track.
You can display the current and subsequent
directory in both lines of the display. The di-
rectories are displayed with the names that
you used when you created the directories
on the SD/MMC. Whilst the directories are
u
During MP3 playback, repeatedly press
the DIS•ESC button 5 until “MP3
BROWSE MODE” is displayed.
95
SD/MMC mode
u
Press the or button 6 to display
all the tracks contained in the directory
one after another.
Scanning tracks – SCAN
(not in MP3 browse mode)
You can scan (briefly play) all the tracks on
the CD.
If you want to select the currently displayed
title,
u
Press and hold down the MENU•OK
button 7for longer than two seconds.
The next track will then be scanned.
u
press MENU•OK button 7.
Fast searching
(not in MP3 browse mode)
To fast search backwards or forwards,
“SCAN” and the selected display mode
appear alternately on the display (see
“Configuring the display”).
u
press and hold down the or button
6until fast searching backwards / for-
wards begins.
Note:
You can set the scanning time. For fur-
ther information on setting the scan-
ning time, please read the section en-
titled “Setting the scanning time” in the
“Radio mode” chapter.
Random track play – MIX
(not in MP3 browse mode)
To play the tracks in the current directory in
random order,
Cancelling SCAN and continuing
listening to a track
Press the MENU•OK button 7.
The currently scanned track will then con-
tinue to be played normally.
u
briefly press the 1 MIX button :.
u
“MIX DIR” appears on the display and the
MIX symbol is displayed.
To play the tracks contained in all the direc-
tories on the inserted SD/MMC in random
order,
Repeating individual tracks or
whole directories – REPEAT
(not in MP3 browse mode)
u
press the 1 MIX button :.
“MIX MMC” appears on the display and the
MIX symbol is displayed.
To play the current track repeatedly,
u
briefly press the RPT 4 button :.
Cancelling MIX
To cancel MIX,
“REPEAT TRACK” and RPT appear briefly on
the display.
u
briefly and repeatedly press the 1 MIX
: button until “MIX OFF” appears on
the display.
To repeat the whole directory,
u
press the RPT 4 button : again.
“REPEAT DIR” appears briefly on the dis-
play.
The MIX symbol disappears.
96
SD/MMC mode
Cancelling REPEAT
Tostopthecurrenttrackorcurrentdirectory
from being repeated,
Recording DAB programmes
onto SDs/MMCs
You can use this device to record a DAB pro-
gramme on an inserted SD/MMC card. The
DAB data stream is then stored as an MPEG
file on the SD/MMC (MPEG 1, Layer 2).
u
briefly and repeatedly press the RPT 4
button : until “REPEAT OFF” appears
on the display.
RPT disappears from the display.
A variety of SD/MMC are commercially
available.
Selecting MP3 info
Since the quality and the software of the
SD/MMC can deviate, Blaupunkt cannot
guarantee the proper functioning of all SD/
MMC that are commercially available.
If you want to select the “MP3 INFO” display
mode, you first have to activate this func-
tion in the menu. In order for the system
to be able to display MP3 information, the
information must be stored on the CD in the
form of ID tags together with the MP3 files.
For this reason, Blaupunkt recommends
the use of SD/MMC cards from “SanDisk”
and “Panasonic” with a maximum capacity
of 512 MB since these cards showed the
best functionality.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
Formatting with the PC cannot ensure that
files can be stored and read without any
problems.
u
u
Press the MENU•OK button 7.
The only supported file system is FAT16.
If you attempt to record onto an SD/MMC
that is formatted differently, you will see
“UNFORMATTED” appear on the display.
Press the or button 6 repeat-
edly until “MP3 INFO” appears on the
display.
u
Use the
buttons 6 to switch be-
Before using SD/MMCs in the Nashville
DAB47, they must be formatted in the
DAB47. For further details on this, please
read the section entitled “Formatting SD/
MMC” in the “SD/MMC mode” chapter.
tween the “ON” and “OFF” options.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Before starting to record, you should make
sure that there is sufficient space on the in-
serted SD/MMC and that the SD/MMC does
not have more than 251 directories stored
on it.
Displaying scrolling texts
The selected information title, track names
or file name and directory name are shown
once as scrolling text when the title chang-
es. To display the information again as
scrolling text,
During the recording, an SD/MMC must not
be removed from the device. Always switch
off the Nashville DAB47 first before remov-
ing an SD/MMC card.
u
briefly press button 5 SCL :.
97
SD/MMC mode
Starting recording
To record a DAB programme onto an SD/
MMC,
ddhhmmss.mp3. “dd” stands for the day
the recording was made, “hh” stands for the
hour recording was started, “mm” stands
for minutes and “ss” for seconds.
The device creates the “DAB_DIR” direc-
tory on the SD/MMC to store the recorded
files.
u
switch to DAB mode and select the pro-
gramme that you want to record. For
further details on this, please read the
“DAB mode” chapter.
u
Press the REC•DEL button 9 when
Telephone/navigation during recording
you want to start recording.
Telephone calls or voice output from a navi-
gation system do not affect recording. The
DAB programme continues to be recorded
in the background during a telephone call or
voice output.
Notes:
• You cannot start recording during
the first 15 seconds after switching
to DAB mode or after switching on
the radio with DAB mode activated.
This also applies if you pressed the
REC•DEL button 9 and the display
shows “RECORDING”.
Stopping recording
If you want to stop recording,
u
briefly press the REC•DEL button 9.
• To avoid damaging the SD/MMC, you
should never start the engine whilst
recording. Starting the engine might
cause the voltage of the vehicle’s
electrical system to drop, which could
permanently damage the SD/MMC.
“RECORDING STOPPED” appears on the
display for approx. two seconds.
Recording is stopped automatically in the
following cases:
•
If the storage space on the SD/MMC
fills completely during recording. In
this case, “CARD FULL” appears on the
display.
• The automatic DAB-FM switching fea-
ture is deactivated whilst recording is
taking place. The DAB programme re-
mains tuned during recording, even if
the reception quality deteriorates.
•
•
If you switch programmes during the
recording.
If a problem arises with communica-
tions between the SD/MMC and the
device, you will see “MMC ERROR” ap-
pear on the display and recording is
then stopped.
Recording starts and “RECORDING” ap-
pears on the display for approx. 2 seconds.
If there is insufficient space available on the
card, “CARD FULL” appears on the display
for approx. 2 seconds. In this case, delete
items from the SD/MMC (see “Deleting re-
cordings” following below) or insert a dif-
ferent SD/MMC.
•
If you deactivate DAB mode whilst re-
cording, e.g. by switching to CD mode
or radio mode.
The file created during recording is given
a name as follows:
98
SD/MMC mode
To set the recording duration,
Making a timer-controlled
u
adjust the recording duration using the
buttons 6.
Press the button 6.
recording of a DAB programme
/
You can use this device to record a DAB
programme at a preset time. While the car
sound system is switched off, the DAB pro-
gramme played last (if it can be received)
is recorded for a specified time (adjustable
from 1 to 90 minutes). You can programme
two timers.
u
TIMER 1 and the set clock time are dis-
played.
To adjust TIMER 1,
u
press the MENU•OK button 7.
The hours behind “TIMER 1” begin to flash.
Use the buttons 6 to set the
Switching timer-controlled recording
on/off
u
/
hour at which you want recording to
begin.
u
In SD/MMC mode, press and hold
down the REC•DEL 9 for longer than
two seconds.
To set the minutes for the start of record-
ing,
The MMC record menu is displayed. “MMC
REC ON” or “MMC REC OFF” appears on the
display.
u
press the button 6.
The minutes behind “TIMER 1” begin to
flash.
u
Press the or button 6 to switch
between the settings “MMC REC ON”
and “MMC REC OFF”.
u
Use the
/
buttons 6 to set the
minute at which you want recording to
begin.
u
Press the MENU•OK button 7.
Setting the timer and recording duration
You can programme two recording timers.
Note:
If you want to set the second timer,
press the button 6 whilst “TIMER
1” is being displayed. “TIMER 2” is dis-
played. Adjust the settings for “TIMER
2” in the same way as described for
“TIMER 1”.
Note:
If you only want to make one recording
at a particular time, set the second tim-
er to the same time setting as the first.
u
In SD/MMC mode, press and hold
down the REC•DEL 9 for longer than
two seconds.
The settings are saved.
To close the MMC-RECORD menu,
The MMC record menu is displayed. “MMC
REC ON” or “MMC REC OFF” appears on the
display.
u
press and hold down the REC•DEL 9
for longer than two seconds.
u
Press the button 6.
The currently set recording “DURATION” is
displayed. The set recording duration is the
same for both timers.
99
SD/MMC mode
which means that files might sound
different when listened to on a com-
puter, e.g. errors are not suppressed
and distortion might be heard.
Playing recordings using the
device
You can listen to the recording by selecting
its corresponding file name in the “DAB_
DIR” directory on the SD/MMC. For further
details on this, please read the sections en-
titled “Selecting a directory” and “Selecting
tracks” at the start of the chapter. If you
switch to SD/MMC mode after making a
recording, the device will start playing the
track that was recorded first.
Deleting recordings
You can delete individual files that are
stored on an SD/MMC.
u
Listen to the file that you want to delete
from the SD/MMC.
u
Press the REC•DEL button 9.
u
To select the track that was recorded
last, press the button 6 as soon as
playback begins.
For two seconds, the display shows
“DELETE ? YES = REC•DEL”.
u
Press the REC•DEL button 9 during
these two seconds.
Playing recordings on other devices
u
Repeat this procedure with all the
tracks that you want to delete.
You can also play the recordings on your PC.
To do so, you need an SD/MMC card reader
and a player software application. You can
also listen to recordings on players that are
capable of reading SDs/MMCs.
Formatting SDs/MMCs
You can format an SD/MMC in the device.
All the data that are stored on it are deleted
in the process.
Notes:
• Even though the file is not an MP3
file, it is still given the “mp3” file ex-
tension. Since all standard player
software applications support Layer
2 files, you can play them on a compu-
ter. If you experience problems when
playing the files on another device,
please check that the player is com-
patible with Layer 2.
Note:
You should format the SD/MMC in the
device to ensure card compatibility
with the device.
You can only format the card whilst the de-
vice is set to AUX, CD/MP3 or FM mode.
u
Switch to FM radio mode. For further
details on this, please read the “Radio
mode” chapter.
• The Nashville DAB47 uses special al-
gorithmsforplayingDABprogrammes
in order to ensure an optimum listen-
ing experience even if you are playing
material that was recorded during
poor reception. PC programmes do
not use special signal processing,
u
u
Press the MENU•OK button 7.
Press the button 6 repeatedly until
“VARIOUS MENU” appears on the dis-
play.
u
Press the MENU•OK 7, to display the
menu.
100
SD/MMC mode
u
u
Press the
“MMC FORMAT”.
/
buttons 6 to select If you have activated the pre-record function
and then start a recording in DAB mode, ap-
prox. 20 seconds (in the case of 192 Kbits/
Press the or button 6.
s) that were broadcast before you pressed
the record button will always be included in
the recording (The first 15 seconds directly
after switching to DAB mode, however, are
excluded.).
“ARE YOU SURE? YES=OK NO=ESC” ap-
pears on the display.
u
Press the MENU•OK 7, to format the
card.
u
u
Press the MENU•OK button 7.
Configuring the display
Press the button 6 repeatedly until
“VARIOUS MENU” appears on the dis-
play.
You can choose between various display
options. For further details on this, please
read the section entitled “Configuring the
display” in the “MP3 mode” chapter.
u
u
u
Press the MENU•OK 7, to display the
menu.
Press the
/
buttons 6 to select
Programming your favourite
tracks for an SD/MMC
Using the TPM function (Track Program
Memory), you can program and play your fa-
vouritetracksforanSD/MMC.Programming
is carried out in the same way as described
in “Programming your favourite tracks for
an MP3 CD” in the “MP3 mode” chapter.
“PRE REC ON” or “PRE REC OFF”.
Press the or button 6 to switch
the pre-recording function ON or OFF.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Switching pre-record on/off
If you switch on the DAB pre-record func-
tion, between 20 and 60 seconds of the
running programme are always buffered.
This allows you to start the recording even
shortly after the title started without miss-
ing the beginning of the title.
The size of the memory determines the
length of the buffered file dependent upon
the data rate of the received DAB pro-
gramme. Therefore, 20 seconds can be
buffered at a data rate of 192 Kbits/s, 30
seconds at 128 Kbits/s and 60 seconds at
64 Kbits/s. The usual bit rate for DAB is 192
Kbits/s.
101
CD-changer mode
Changing the display
You can choose from various display op-
tions in CD mode:
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
•
•
•
“NORMAL MODE”:
First line: Track number
Second line: CD number / CD name and
playing time
“CLOCK MODE”:
Switching to CD-changer mode
First line: Track number.
Second line: CD number / CD name and
clock time
u
Press the SRC button < repeatedly
until “MMC” appears on the display.
The device starts playing the first CD that
the CD changer detects.
“MINIMAL MODE”:
First line: Track number.
To switch between the display options,
press the DIS•ESC button 5.
Selecting CDs
To move up or down to another CD,
u
In the menu you can choose to display the
CD name (if available) instead of the CD
number. (For further information, please
read the “Naming CDs” section):
u
press the or button 6 once or
several times.
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
Selecting tracks
To move up or down to another track on the
current CD,
u
u
Press the MENU•OK button 7.
Press the or button 6 repeated-
ly until “CD NAME” or “DISC NUMBER”
appears on the display.
u
press the or button 6 once or
several times.
u
Use the
buttons 6 to switch
between the “CD NAME” and “DISC
NUMBER” options.
Fast searching (audible)
To fast search backwards or forwards,
When you have finished making your chang-
es,
u
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
102
CD-changer mode
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on all the
inserted CDs in ascending order,
u
briefly press the RPT 4 button :.
u
press and hold down the MENU•OK
button 7 for longer than two sec-
onds.
“RPT TRK” appears briefly and RPT lights up
on the display.
To repeat the current CD,
“SCAN” and the selected display mode ap-
pear alternately on the display.
u
press the RPT 4 button : again.
“RPT CD” appears briefly and RPT lights up
on the display.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scanning
time” in the “Radio mode” chapter.
Cancelling REPEAT
To stop the current track or current CD from
being repeated,
u
repeatedly press button RPT 4 : until
“RPT OFF” appears on the display and
RPT disappears.
Stopping SCAN
To stop scanning,
u
press the MENU•OK button 7.
Random track play (MIX)
To play the tracks on the current CD in ran-
dom order,
The currently scanned track will then con-
tinue to be played normally.
Naming CDs
u
briefly press the 1 MIX button :.
The car sound system allows you to assign
names for up to 30 CDs so that you can rec-
ognise them more easily. The names can be
a maximum of seven characters long.
“CD NAME FULL” will appear on the display
if you try assigning more than 30 names.
“MIX CD” appears briefly and MIX lights up
on the display.
To play the tracks on all inserted CDs in ran-
dom order,
u
press the 1 MIX button : again.
“MIX ALL” appears briefly and MIX lights up
on the display.
Entering/editing CD names
u
u
u
Listen to the CD that you want.
Cancelling MIX
Press the MENU•OK button 7.
u
Press the 1 MIX button : repeatedly
until “MIX OFF” appears on the display.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
103
CD-changer mode
u
u
Press the MENU•OK button 7.
u
u
Press and hold down the MENU•OK
button 7. After approx. four sec-
onds you will hear a beep and “DELETE
NAME” appears on the display.
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
Release the MENU•OK button 7.
u
Press the MENU•OK button 7.
The CD name will be deleted.
You will now enter editing mode. If your CD
does not have a name yet, “ABCDEFG” ap-
pears on the display.
u
You can return to the menu by pressing
the MENU•OK button 7.
The currently active text input position
flashes.
Deleting all CD names
You can delete all the CD names stored in
the car sound system.
u
Use the
/
buttons 6 to select the
character that you want. If you want an
empty space, simply select the under-
score.
u
u
u
Listen to a CD.
Press the MENU•OK button 7.
u
Use the or button 6 to move from
one text input position to another.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
When you have finished making your chang-
es,
u
u
Press the MENU•OK button 7.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
u
Press the MENU•OK button 7.
Deleting a CD name
The name of the current CD is displayed.
u
Listen to the CD whose name you want
to delete.
u
PressandholddowntheMENU•OKbut-
ton 7. After approx. four seconds you
will hear a beep and “DELETE NAME”
appears on the display. Continue hold-
ing the button pressed down until you
hear a second beep and “DELETE ALL”
appears on the display.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CD NAME EDIT” appears on
the display.
u
Release the MENU•OK button 7.
The CD names will be deleted.
u
You can close the menu by pressing the
MENU•OK button 7.
u
Press the MENU•OK button 7.
The name of the current CD is displayed.
104
Clock time
u
Press the MENU•OK button 7.
CLOCK time
The time appears on the display. The hours
flash and can be adjusted.
Displaying the time
u
Set the hours using the
/
buttons
Youcanmaketheclocktimeappearcontinu-
ously in the bottom part of the display while
any audio source is activated. For further in-
formation, please read the “Configuring the
display” sections in the relevant chapters.
6.
Once the hours are set,
press the button 6.
The minutes flash.
u
u
Set the minutes using the
tons 6.
/
but-
Setting the clock automatically
You can configure the system to set the
clock time automatically using the RDS sig-
nal.
u
Press the MENU•OK button 7 and
then the DIS•ESC button 5.
u
u
Press the MENU•OK button 7.
Selecting 12/24-hour clock
mode
Press the or button 6 repeat-
edly until “CLOCK MENU” appears on
the display.
u
Press the MENU•OK button 7.
u
Press the or button 6 repeat-
edly until “CLOCK MENU” appears on
the display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CLOCK AUTO” or “CLOCK
MANUAL” appears on the display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeated-
ly until “24 HOUR MODE” or “12 HOUR
MODE” appears on the display.
u
u
Select the “CLOCK AUTO” setting using
the or button 6.
Press the MENU•OK button 7.
u
Press the or button 6 to switch
between the modes.
The menu appears again.
When you have finished making your chang-
es,
Setting the clock manually
To set the clock time manually,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
u
u
press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CLOCK MENU” appears on
the display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CLOCK SET” appears on the
display.
105
Clock time
Sound
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
Sound
You can adjust the sound settings (bass
and treble) separately for each source (ra-
dio, CD/MP3, CD changer, AUX, traffic an-
nouncement, telephone/navigation). The
volume distribution settings (balance and
fader) apply to all the audio sources.
u
u
press the MENU•OK button 7.
Press the or button 6 repeat-
edly until “CLOCK MENU” appears on
the display.
Note:
You can only adjust the audio settings
for traffic announcements and the
navigation system whilst a traffic an-
nouncement or navigation announce-
ment is actually playing. Likewise, you
can only adjust the telephone audio
settings during a telephone call.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “OFF CLOCK OFF” or “OFF CLOCK
ON” appears on the display.
u
Press the or button 6 to switch
between the ON/OFF settings.
Adjusting the bass
When you have finished making your chang-
es,
u
Press the AUD•DEQ button ;.
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
u
Press the or button 6 to adjust
the bass.
u
Press the AUD•DEQ button ; to
close the menu or press the
or
button 6 to make further changes to
the settings.
Adjusting the treble
u
Press the AUD•DEQ button ;.
u
Press the or button 6repeatedly
until “TREBLE” appears on the display.
u
u
Press the or button 6 to adjust
the treble.
Press the AUD•DEQ button ;to close
the menu or press the or button
6 to make further changes to the set-
tings.
106
Sound
X-Bass
Setting the left/right volume
distribution (balance)
X-BASS
The X-BASS feature can be used to boost
To adjust the left/right volume distribution the bass at low volume levels.
(balance),
Adjusting the X-BASS boost
u
u
press the AUD•DEQ button ;.
The X-BASS boost (Level) can be set in
steps ranging from 0 to 6 for one of the fol-
lowing frequencies: 32 Hz, 40 Hz, 50 Hz,
63 Hz or 80 Hz.
Press the or button 6 repeat-
edly until “BALANCE” appears on the
display.
u
u
Press the or button 6 to adjust
the balance (right/left).
“LVL 0” means that no X-BASS boost will
be applied, and “LVL 6” means that X-BASS
will be boosted by the maximum amount.
Press the AUD•DEQ button ;to close
the menu or press the or button
6 to make further changes to the set-
tings.
u
Press the AUD•DEQ button ;.
“BASS” appears on the display.
u
u
Press the or button 6repeatedly
until “X-BASS” appears on the display.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
Press the MENU•OK button 7.
The X-Bass menu is displayed. The frequen-
cy flashes.
u
u
press the AUD•DEQ button ;.
Press the or button 6repeatedly
until “FADER” appears on the display.
u
Press the or button 6 to set the
frequency that you want.
u
Press the button 6.
u
u
Press the or button 6 to adjust
the fader (front/rear).
The boost level (LVL) flashes.
u
Press the or button 6 to set the
boost level that you want.
Press the AUD•DEQ button ;to close
the menu or press the or button
6 to make further changes to the set-
tings.
u
Press the AUD•DEQ button ;.
107
Equalizer
Selecting sound presets
You can select sound presets for the follow-
ing music types.
Equalizer
The device features
DEQ+.
a
digital equalizer
•
•
•
•
•
•
POP
ROCK
TECHNO
JAZZ
CLASSIC
SPEECH
This means you have three 5-band equal-
izers, six sound presets and seven vehicle
presets at your disposal.
You can configure the EQ1 - EQ3 equaliz-
ers manually. When doing so you can ad-
just (boost or reduce) one frequency of an
equalizer band as well as the quality factor,
i.e. the width of the filter.
The settings for these music styles have al-
ready been programmed.
u
Press and hold down the AUD•DEQ
button ; for longer than two sec-
onds.
The following bands are available:
•
•
•
•
•
LOW 1
LOW 2
HIGH 1
HIGH 2
HIGH 3
20 - 250 Hz
20 - 250 Hz
315 - 20,000 Hz
315 - 20,000 Hz
315 - 20,000 Hz
u
Press the or button 6 repeat-
edly until “SOUND PRESETS” appears
on the display.
u
u
Press the MENU•OK button 7.
Switching the equalizer on/off
To switch the equalizer on/off,
Press the or button 6 repeatedly
until the sound preset that you want is
displayed.
u
press and hold down the AUD•DEQ
button ; for longer than two sec-
onds.
u
Press the MENU•OK button 7 and
then the DIS•ESC 5.
The equalizer menu appears on the dis-
play.
The settings are saved.
Selecting vehicle presets
You can select optimised equalizer settings
for the following vehicle types:
To activate the equalizer,
u
select one of the sound presets or ad-
just the equalizer manually. For further
details on this, please read the sections
that follow in this chapter.
•
•
•
•
•
•
•
COMPACT
4DOOR
CONVERT
VAN
ROADSTER
MINI
To deactivate the equalizer,
u
press the or button 6 repeatedly
until “EQ OFF” appears on the display.
TRUCK
The settings for these vehicle types have al-
ready been programmed.
u
Press the MENU•OK button 7 and
then the DIS•ESC 5.
108
Equalizer
u
u
Press and hold down the AUD•DEQ Making adjustments
button ; for longer than two sec-
onds.
u
Press and hold down the AUD•DEQ
button ; for longer than two sec-
onds.
Press the or button 6 repeat-
edly until “CAR PRESETS” appears on
the display.
u
Press the or button 6 repeat-
edly until “MANUAL EQ” appears on the
display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeatedly
until the vehicle type that you want is
displayed.
u
u
Press the MENU•OK button 7.
Press the
or button 6 repeat-
edly until the equalizer that you want to
configure (“USER EQ1”, “USER EQ2” or
“USER EQ3”) appears on the display.
u
Press the MENU•OK button 7 and
then the DIS•ESC 5.
The settings are saved.
u
u
Press the MENU•OK button 7.
Press the
or button 6 repeat-
Manually adjusting the equalizer
Notes on adjusting the settings
We recommend you use a CD that you are
familiar with for making changes to the set-
tings.
edly until the equalizer band that you
want to configure (“LOW1”, “LOW2”,
“HIGH1”, “HIGH2” or “HIGH3”) ap-
pears on the display.
u
u
Press the MENU•OK button 7.
Press the or button 6 repeat-
edly until the frequency that you want
is displayed.
Beforeadjustingtheequalizer,setthesound
and volume distribution settings to zero and
deactivate X-BASS. For further information,
please read the “Sound” chapter.
u
Press the MENU•OK button 7.
The top line displays the GAIN and the qual-
ity factor “Q”. The gain setting flashes. You
can use the quality factor to adjust the width
of the filter. The higher you set the value for
the quality factor the more directly the filter
will be applied to the selected frequency.
u
u
Listen to the CD.
What kind of impression does the
sound make?
u
u
Now read the “Sound impression” col-
umn in the table entitled “Help adjust-
ing the equalizer”.
To adjust the gain,
Set the equalizer values as described in
the “Measures” column.
u
press the or button 6.
To adjust the quality factor,
press the button 6.
The quality factor setting flashes.
u
u
Press the or button 6 repeat-
edly until the setting that you want is
displayed.
109
Equalizer
Note:
Adjusting the display settings
Adjusting the display
Please note that you can boost or re-
settings
duce one frequency in each equalizer
band. Proceed in the way described
above with all the equalizer bands that
you want to adjust.
Adjusting the display brightness
If your car sound system is connected as de-
scribed in the installation instructions, the
display brightness switches with the head-
lights. You can adjust the display brightness
separately for night and day in steps rang-
ing from 1 - 16.
u
Press the MENU•OK button 7 and
then repeatedly the DIS•ESC button
5 or the AUD•DEQ button ; for
longer than two seconds.
The settings are saved.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “DISPLAY MENU” appears on the
display.
Help adjusting the equalizer
Sound Impression / Measures
problem
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “DAY” or “NIGHT” appears on the
display with the current setting.
Bass sound is too
weak
Increase bass with
Frequency: 32 to
160 Hz
u
Press the or button 6 to switch
between the brightness levels.
Gain: +4 to +6
Dirty bass
Reduce the lower
mid level with
Frequency: 400 Hz
Gain: approx. -4
When you have finished making your chang-
es,
Booming sound
Unpleasant pres-
sure
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Sound very much
in the foreground, level with
Reduce the mid
aggressive, no
stereo effect.
Frequency: 1,000
to 2,500 H
Gain: -4 to -6
Adjusting the viewing angle
You can adjust the display’s viewing angle to
suit the installation position of the device in
your vehicle.
Dull sound
Little clarity
No brilliance to the Frequency: 6,300
instruments
Boost the treble
range with
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “DISPLAY MENU” appears on the
display.
to 10,000 Hz
Gain: +2 to +4
u
Press the MENU•OK button 7.
110
Adjusting the display settings
External audio sources
u
Press the or button 6 repeated-
ly until “ANGLE” appears on the display
with the current setting.
External audio sources
In addition to the CD changer, you can
also connect another external audio source
equipped with a line output. If no CD chang-
er is connected to the device, you can con-
nect two external audio sources. Audio
sources can, for example, be portable CD
players, MiniDisc players or MP3 players.
u
Press the or button 6 to adjust
the viewing angle.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
The AUX input must be activated in the
menu.
If you want to connect an external audio
source, you will need an adapter cable. You
can obtain this cable (Blaupunkt no.: 7 607
897 093) from your authorised Blaupunkt
dealer.
Switching the AUX input on/off
u
Press the MENU•OK button 7.
u
Press the or button 6repeatedly
until “AUX MENU” appears on the dis-
play.
u
u
Press the MENU•OK button 7.
Repeatedly press the
or
button
6 until “AUX2” or “AUX1” appears on
the display.
If a CD changer is connected, “AUX1” is not
available.
u
Use the
buttons 6 to switch be-
tween the “ON” and “OFF” options.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Note:
If the AUX input is switched on, you can
select it by pressing the SRC button.
111
Amplifier
TMC
Amplifier
TMC for dynamic navigation
systems
The car sound system provides connec-
tions that allow you to connect external am-
plifiers.
TMC stands for “Traffic Message Channel”.
Traffic reports are broadcast digitally via
TMC, which means they can be used by
compatible navigation systems during route
planning. Your car sound system has a TMC
output, which you can use for connecting
Blaupunkt navigation systems. You can find
out from your Blaupunkt dealer which navi-
gation systems can be used with your car
sound system.
We recommend you use well-matched
products from the Blaupunkt or Velocity
product ranges.
Switching the internal amplifier
on/off
If you are using external amplifiers, you can
switch off the device’s internal amplifier
(“INT AMP OFF” setting).
If a navigation system is connected and a
TMC sender is being received, the display
shows TMC.
Note:
Please check this setting if the loud-
speakers do not emit any sound.
If dynamic navigation is active, the system
will tune into a TMC station automatically.
u
u
Press the MENU•OK button 7.
Press the or button 6repeatedly
until “VARIOUS MENU” appears on the
display.
u
u
Press the MENU•OK 7, to display the
menu.
Press the or button 6repeatedly
until “INT AMP ON” or “INT AMP OFF”
appears on the display.
u
Use the
buttons 6 to choose
between “INT AMP ON” and
“INT AMP OFF”.
When you have finished making your chang-
es,
u
press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
112
Specifications
Pre-amp out
4 channels:
Specifications
3 V
Amplifier
Output power:
4 x 18 watts sine at
Input sensitivity
14.4 V and 1%
distortion factor
at 4 ohms.
AUX input:
2 V / 6 kohm
10 V / 1 kohm
Tel/Navi input:
4 x 26 watts sine in
accordance with
DIN 45324 at 14.4 V
at 4 ohms.
Weight
1.33 kg
4 x 50 watts
max. power
Tuner
Wavebands:
FM
MW
LW
:
:
:
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
DAB
BAND III (Europe):
174.928 MHz - 239.200 MHz
(Channel 5A - Channel 13F)
L-BAND (Europe):
1.452961 GHz - 1.490625 GHz
(Channel LA - Channel LW)
CD
Frequency response:
20 - 20,000 Hz
Subject to changes!
113
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempi-
to, in un posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado
en un lugar seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar
seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
511
Country:
Phone:
Fax:
WWW:
Germany
Austria
(D)
(A)
(B)
0180-5000225
01-610 39 0
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
Belgium
Denmark
Finland
02-525 5444
(DK) 44 898 360
(FIN) 09-435 991
France
(F)
01-4010 7007
Great Britain
Greece
(GB) 01-89583 8880
(GR) 210 94 27 337
(IRL) 01-46 66 700
Ireland
Italy
(I)
(L)
02-369 62331
40 4078
Luxembourg
Netherlands
Norway
Portugal
Spain
(NL) 00 31 24 35 91 338 00 31 24 35 91 336
(N)
(P)
(E)
(S)
+47 64 87 89 60
2185 00144
902 52 77 70
08-7501850
+47 64 87 89 02
2185 00165
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
022-8771260
0212-346 00 40
708-6817188
Sweden
Switzerland
Czech. Rep.
Hungary
Poland
(CH) 01-8471644
(CZ) 02-6130 0446
(H)
(PL)
(TR)
76 511 803
0800-118922
0212-335 06 71
Turkey
USA
(USA) 800-950-2528
Brasil
(Mercosur)
Malaysia
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
(Asia Pacific) (MAL) +604-6382 474
Gerätepass
Nashville DAB47
Name:
Typ:
.....................................................................
7 647 661 310
....................................................................
Serien-Nr:
BP ................................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
|