2
6
4
1
3
7
8
9
5
11 10
13 12
16 15
14
3
CONTROLS
1
button - unlatches the flip/
release panel
9
button - opens the flip/release
panel
2
3
Volume control
:
;
Arrow-key block
Button - switches the radio and
mute function on/off
OK button - confirms menu en-
tries and starts the scan function
4
RDS button - switches RDS con-
venience function on/off (radio
data system).
<
=
DEQ button (digital equalizer) -
switches the equalizer on/off
AUDIO button - adjusts bass,
treble, X-BASS, balance and
fader
Selects variable radio texts.
5
BND button (band), source se-
lection for radio mode,
selection of FM memory levels
and the wavebands MW and LW
TS, starts the Travelstore func-
tion.
>
?
Key block 1 - 6
TRAF button - activates the traf-
fic-information standby mode
@
SRC button - selects between
cassette, CD changer/Compact
Drive MP3 (if connected) and
AUX sources
6
7
Display (display field)
DIS, change display contents
button - indicates the time on
the display
8
MENU button - selects the menu
for basic settings
31
TABLE OF CONTENTS
Skipping Blank Tape...................... 46
Selecting Tape Type ...................... 46
Dolby* B Noise Reduction ............. 46
Changing the display ..................... 46
Notes and accessories .......... 33
Flip/release panel .................. 34
Switching on/off .................... 35
Volume adjustment ................ 36
CD changer mode.................. 47
Starting CD changer mode............ 47
Selecting a CD.............................. 47
Selecting a track ........................... 47
Fast search (audible) ..................... 47
Changing the display ..................... 47
Repeating individual tracks or
whole CDs (REPEAT).................... 47
Random play (MIX) ........................ 47
Scanning all tracks on all CDs
Radio mode............................ 37
Setting the tuner............................ 37
Switching to radio mode ................ 37
RDS function (AF, REG) ................ 38
Selecting the waveband/memory ... 38
Tuning into a station....................... 38
Setting the sensitivity of the
station search mode ...................... 39
Storing stations ............................. 39
Storing stations automatically
(Travelstore) .................................. 39
Listening to preset stations ............ 39
Scanning receivable stations
(SCAN) ......................................... 40
Setting the scanning time .............. 40
Programm-Typ (PTY) ..................... 40
Optimising radio reception............. 41
Selecting radio text display ............ 42
Setting the display ......................... 42
(SCAN) ......................................... 48
Interrupting Play (PAUSE) ............. 48
Naming CDs ................................. 48
CLOCK - Time ........................ 49
Tone and volume balance ...... 50
Equalizer ................................ 52
Notes on adjusting the equalizer .... 52
Switching the equalizer on/off ........ 52
Setting the equalizer ...................... 53
Selecting sound presets ................ 53
Setting the level indicator............... 53
Setting aid for the equalizer ........... 54
Traffic information.................. 43
Cassette Operation ................ 44
Cassette Play ................................ 44
Cassette Ejection .......................... 44
Changing Direction of Play ............ 44
Skipping Tracks (S-CPS) .............. 44
Playing a Track Repeatedly ............ 44
Sampling All the Tracks on a
External audio sources .......... 55
TMC for dynamic navigation
systems .................................. 55
Technical data ........................ 56
Cassette (SCAN) .......................... 45
Fast Winding................................. 45
Switching the Radio Monitor
On / off ......................................... 45
Pausing During Play ...................... 45
32
NOTES AND ACCESSORIES
Installation
Notes and accessories
If you would like to install your car radio
yourself, please read the installation and
connection instructions at the end of the
manual.
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Please read these operating instruc-
tions before using the equipment for
the first time.
Accessories
Please use only Blaupunkt-approved
accessories.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the telephone numbers printed
at the back of this booklet.
Remote controls
The most important functions of your car
radio can be selected safely and con-
veniently from the steering wheel using
the remote controls RC 08, RC 10 or
RC 10H (available as an optional ex-
tra).
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
The radio cannot be switched on/off via
remote control.
Amplifiers
All Blaupunkt amplifiers are suitable for
use with the radio.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
CD changer
The following Blaupunkt CD changers
can be connected to the radio:
D-31139 Hildesheim
CDC A 02, CDC A 08 and IDC A 09.
The Blaupunkt CDC A08 CD changer
is included with the Alaska DJ52.
Road safety
Road safety has priority. Only
operate your car radio if road and
traffic conditions allow. Familiarise
yourself with the unit before setting
off on your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time. For this reason, set the
volume of your car radio at a suita-
ble level.
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nect a Compact Drive MP3, you will first
need to use a computer to store the
MP3 music tracks on the Microdrive™
hard disk inside the Compact Drive
MP3. Then, when the Compact Drive
33
FLIP/RELEASE PANEL
Flip/release panel
NOTES AND ACCESSORIES
MP3 is connected to the car radio, you
can play the tracks like normal CD mu-
sic tracks. The Compact Drive MP3 is
operated in the same way as a CD
changer. Most of the CD changer func-
tions can also be used with the Com-
pact Drive MP3.
Theft protection
Your car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car. Do not leave the panel
behind in the car, even if it is out of sight.
The constructive design of the panel
makes for simple handling.
Amplifier / sub-out
The car radio provides connections for
connecting external amplifiers and a
subwoofer.
We recommend you use well-matched
products from the Blaupunkt or Velocity
product ranges.
Note:
● Do not drop the flip/release panel.
● Do not expose the flip/release pan-
el to direct sunshine or other sourc-
es of heat.
Interface for vehicle-specific display
and steering-wheel remote control
Some vehicles are already fitted at the
factory with a display in the dashboard
and a steering-wheel remote control.
There are specific interfaces available
for various vehicle types so that you
can use the remote control and the dis-
play for the car radio.
● Keep the flip/release panel in the
case provided.
● Avoid direct skin contact with the
flip/release panel’s contact. Please
clean it when necessary with some
white spirit on a lint-free cloth.
Removing the flip/release panel
You can find out for which vehicles
such an interface is available from your
Blaupunkt dealer or from the Blaupunkt
telephone hotline.
1
34
FLIP/RELEASE PANEL
SWITCHING ON/OFF
● Press the
button 1.
Switching on/off
This unlatches the flip/release panel.
There are various ways of switching the
car radio on and off, as described be-
low.
● First pull the flip/release panel
straight and then to the left out of
the unit.
Switching on/off using the ignition
● After removing the flip/release pan-
If the car radio is correctly connected to
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
el, the unit switches itself off.
● All the current settings are saved.
● If there is a cassette in the unit, it
remains there.
You can also switch on your car radio
when the vehicle ignition is off.
Attaching the flip/release panel
● To do so, press the button 3.
● Slide the flip/release panel from left
Note:
to right into the unit guide.
To protect the vehicle battery, the unit
switches off automatically after one
hour.
● Press the left side of the panel into
the unit until it slots into place.
Switching on/off using the flip/
release panel
● Remove the flip/release panel.
The unit switches itself off.
● Replace the flip/release panel once
more.
Note:
The car radio is switched on. The last
settings (radio, cassette, CD changer/
Compact Drive MP3 or AUX) are acti-
vated.
● Do not press against the display
while attaching the flip/release pan-
el.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, cas-
sette, CD changer/Compact Drive MP3
or AUX) when the panel is replaced.
Switching on/off using the button
3
● To switch the unit on, press the but-
ton 3.
● To switch the unit off, hold the but-
ton 3 down for more than two
seconds.
The car radio is now switched off.
35
VOLUME ADJUSTMENT
Volume adjustment
Mute setting
This feature enables you to lower the
system volume instantaneously (mute).
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
● Briefly press button 3.
“MUTE” appears on the display.
● To raise the system volume, turn
the volume control 2 to the right.
● To lower the system volume, turn
the volume control 2 to the left.
Telephone Audio/Navigation
Audio
Setting the switch-on volume
If your car radio is connected to a mo-
bile telephone or a navigation system,
the volume will be muted as soon as
you “pick up” the telephone or the radio
relays voice output from the navigation
system and the conversation or voice
output is heard through the radio's loud-
speakers. In order for this to work, the
mobile telephone or navigation system
has to be connected to the car radio as
described in the instructions. For this,
you need adapter cable Blaupunkt no.
7 607 001 503.
You can set the volume at which you
wish the car radio to play when switched
on.
● Press the MENU button 8.
● Press the or button : repeat-
edly until “ON VOLUME” appears
on the display.
● Use the
buttons : to set the
switch-on volume.
If you select “LAST VOL”, the volume
played before the unit was last switched
off will be reactivated.
To find out which navigation systems are
compatible with your car radio, please
consult your Blaupunkt dealer.
Note:
● To protect your hearing, the maxi-
mum switch-on volume under the
“LAST VOL” setting is “38”. If the
volume was higher before the unit
was switched off and “LAST VOL”
has been selected, the volume will
be set at “38” the next time the ra-
dio is switched on.
If a traffic announcement is received
during a telephone call or navigation-
system voice output, the traffic an-
nouncement will not be heard until the
conversation/voice output is over.
The volume at which telephone conver-
sations and voice output from the navi-
gation system are switched on is ad-
justable.
When you have completed setting the
volume,
● Press the MENU button 8.
● press the MENU button 8.
● Press the button : repeatedly
until “TEL/NAVI VOL” appears on
the display.
36
VOLUME ADJUSTMENT
RADIO MODE
● Use the
desired volume.
● When you have completed the set- receiver. Many of the receivable FM sta-
buttons : to set the
Radio mode
This unit is equipped with an RDS radio
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears on the dis-
play as soon as it is received.
tings, press either the MENU but-
ton 8 or OK ;.
Note:
You can adjust the volume for telephone
conversations and voice output while
they are being heard by using the vol-
ume control 2.
Setting the tuner
In order to guarantee the perfect func-
tioning of the radio element, the unit
must be set for the region in which you
are located. You can choose between
Europe (EUROPE) and America (N
AMERICA). The tuner comes from the
factory set for the region in which the
unit was sold. Should you encounter
problems with radio reception, please
check this setting.
Automatic Sound
This function adjusts the volume of your
car radio automatically to your driving
speed. This requires your device to be
connected as described in the installa-
tion guide.
The automatic volume booster can be
set in six stages (0-5).
● Press the MENU button 8.
This set of instructions refers to the “EU-
ROPE” setting.
● Press the button : until “AUTO
SOUND” appears in the display.
● Press the MENU button 8.
● Set the volume adjustment with the
buttons :.
● Press the button : repeatedly
until “TUNER AREA” appears on
the display.
● When the setting process is com-
plete, press the MENU button 8
or OK ;.
● Press the or button : for
longer than two seconds to
switch between “EUROPE” and
“N AMERICA”.
Note:
The right speed-adjusted volume set-
ting depends on noise levels inside your
car. Try various values (0-5) until you
find the best setting.
● Press the MENU button 8 or OK
;.
Switching to radio mode
If you are in cassette, CD changer/Com-
pact Drive MP3 or AUX mode:
● press the BND/TS button 5.
37
RADIO MODE
The RDS convenience functions are
active when RDS lights up on the dis-
play with a symbol. When the RDS con-
venience functions are activated, “REG
ON” or “REG OFF” appears briefly on
the display.
RDS function (AF, REG)
The RDS functionsAF (Alternative Fre-
quency) and REG (Regional) extend
your radio's range of functions.
● AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
Selecting the waveband/
memory
● REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
With the REG function, your car ra-
dio is prevented from switching to
alternative frequencies with a dif-
ferent regional content.
This unit can receive programmes
broadcast over the FM as well as MW
and LW (AM) waveband. There are
three preset memory levels for the FM
range and one each for the MW and
LW ranges. Six stations can be stored
on each memory level.
● In order to switch between memory
levels or wavebands, briefly press
the BND/TS button 5.
Note:
REG has to be specially activated/de-
activated in the unit's menu.
Tuning into a station
There are various methods available for
tuning into a station.
Switching REG function on/off
To use the REG function,
● press the MENU button 8.
Automatic station search mode
● Press the button : repeatedly
until “REG” appears on the display.
“OFF” or “ON” will be displayed
alongside “REG”.
● Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
● To switch REG on or off, press the
or button :.
You can also tune into stations manual-
ly.
● Press the MENU button 8 or OK
;.
● Press either the or buttons :.
Switching the RDS convenience
function on/off
Note:
You can only tune into stations manual-
ly if the RDS function has first been de-
activated.
● To use the RDS AF function, press
the RDS button 4.
38
RADIO MODE
Browsing through broadcasting
networks (only FM)
Storing stations
Storing stations manually
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
● Select the required FM memory
level, FM1, FM2, FMT or either
waveband MW or LW.
● Tune into the desired station.
● Press the or button : to
move to the next station on the
broadcasting network.
● Hold down one of the preset sta-
tion buttons 1 - 6 > on which you
wish to store the station for more
than two seconds.
Note:
If you want to use this feature, the RDS
function must first be activated.
Storing stations automatically
(Travelstore)
You can store the six stations with the
strongest reception in the region auto-
matically (only FM). The stations are
stored in the FMT memory.
You will then only be able to switch to
stations that you have received once
already. To do so, use the Scan or Trav-
elstore function.
Setting the sensitivity of the
station search mode
Note:
Stations that were previously stored in
this memory are deleted in the process.
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
● Hold down the BND / TS button 5
for more than two seconds.
● Press the MENU button 8.
The automatic station-storing procedure
begins. “TRAVEL-STORE” appears on
the display. Once the process is com-
pleted, the station stored in FMT mem-
ory location 1 is played.
● Press the button : repeatedly
until “SENS” appears on the dis-
play.
● Press the button :.
The display shows the currently set val-
ue for sensitivity. “SENS 6” denotes
Listening to preset stations
maximum sensitivity. “SENS 1” is the ● Select the memory or frequency
minimum.
range.
● Use the
buttons : to set the
desired degree of sensitivity.
● Hold down the preset station but-
ton 1 - 6 > of the desired station.
● When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.
39
RADIO MODE
Scanning receivable stations
(SCAN)
You can briefly listen in to all receivable
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
Programm-Typ (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme they are
currently broadcasting. This information
can be received and displayed by your
car radio.
Starting SCAN
For example, the programme types can
be:
● Hold down the OK button ; for
more than two seconds.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
The scanning process begins. “SCAN”
appears briefly on the display, followed
by the current station name or frequen-
cy, which flashes.
CLASSICS
You can use the PTY function to select
stations of a particular programme type.
Ending SCAN, continuing to listen
to a station
PTY-EON
Once the programme type has been
selected and the search started, the unit
switches from the current station to one
of the selected programme type.
● Press the OK button ;.
The scanning process is completed, the
station last scanned remains active.
Setting the scanning time
Note:
● If no station corresponding to the
selected programme type is found,
a beep sounds and “NO PTY” ap-
pears briefly on the display. The
unit then tunes in automatically to
the station last received.
● Press the MENU button 8.
● Press the button : repeatedly
until “SCANTIME” appears on the
display.
● Use the
buttons : to set the
desired scanning time.
● If the set station or a different sta-
tion in the broadcasting network
should broadcast the desired pro-
gramme type at a later time, the
unit will automatically switch from
the current station, or from cassette
or CD changer mode, to the station
broadcasting the desired pro-
gramme type.
● Once the setting has been com-
pleted, press the MENU button 8
or OK ;.
Note:
The set scantime also applies to scan-
ning in cassette mode but not to scan-
ning in CD changer mode.
40
RADIO MODE
Switching PTY on/off
Storing the programme type on the
preset station buttons
● Press the MENU button 8.
● Use the or button : to select
● Press the or button : repeat-
edly until “PTY ON” or “PTY OFF”
appears on the display.
a programme type.
● Hold down the desired preset sta-
tion button 1 - 6 > for more than
two seconds.
● Press the or button : to
switch PTY on (ON) or off (OFF).
The programme type is now stored on
the selected preset station button 1 - 6
>.
When PTY is activated, PTY lights up
on the display.
● Press the MENU button 8 or OK
;.
Optimising radio reception
High-frequency cut-off feature
(HICUT)
Selecting programme type and
starting a search
The HiCut function improves the sound
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced and thus also the
interference level.
● Press the or button :.
The current programme type appears
on the display.
● If you would like to select a differ-
ent programme type, you can
switch to a different programme
type by pressing the or button
: within the time the programme
is displayed.
Switching HiCut on/off
● Press the MENU button 8.
● Press the button : repeatedly
until “HICUT” appears on the dis-
play.
Or
● Press one of the buttons 1 - 6 >
to select the programme type
stored on that particular button.
● Use the or button : to select
HICUT.
“HICUT 0” denotes no treble reduction,
“HICUT 3” the greatest automatic reduc-
tion of the treble and the interference
level.
The selected programme appears brief-
ly on the display.
● Press the or button : to start
the search.
● Press the MENU button 8 or OK
;.
The next station corresponding to your
selected programme type will then be
set.
41
RADIO MODE
Note:
Interference-related waveband
change (SHARX)
If you tune into an already stored sta-
tion using a different means (e.g. us-
ing SCAN or by searching), the “radio
texts” will be displayed.
With the SHARX function you can elim-
inate interference from neighbouring
stations almost completely (FM). Acti-
vate the SHARX function in an area of
high transmitter density.
Setting the display
In radio mode you can choose be-
tween the continuous display of the
time or the continuous display of the
station name/frequency.
Switching SHARX on/off
● Press the MENU button 8.
● Press the button : repeatedly
until “SHARX” appears on the dis-
play.
● Hold down the DIS /
button 7
until the desired feature appears on
the display.
● Use the or button : to switch
SHARX on or off.
“SHARX OFF” denotes no automatic
waveband change, “SHARX ON” that
the SHARX feature is activated.
● Press the MENU button 8 or OK
;.
Selecting radio text display
Some radio stations use the RDS sig-
nal to broadcast advertising or other in-
formation instead of their station name.
Such “radio texts” appear on the dis-
play.
You can deactivate the “radio texts”
display for stations that you have
stored on the station buttons.
● Press the RDS button 4 until
“NAME FIX” appears on the dis-
play.
● In order to reactivate the display of
“radio texts”, hold down the RDS
button 4 until “NAME VAR” ap-
pears on the display.
42
TRAFFIC INFORMATION
Setting the traffic
announcement volume
Traffic information
Your car radio is equipped with an RDS-
EON reception system. EON stands for
Enhanced Other Network.
● Press the MENU button 8.
● Press the button : repeatedly
until “TA VOLUME” appears on the
display.
When a traffic announcement (TA) is
broadcast, your unit will automatically
switch, within a broadcasting network,
from a station which does not transmit
traffic information to one that does.
● Use the or button : to set the
desired volume.
● Once the setting is completed,
press the MENU button 8 or OK
;.
The unit reverts to the programme pre-
viously listened to when the traffic an-
nouncement is over.
Note:
Switching traffic information
priority on/off
You can also adjust the volume during
a traffic announcement for its duration
by using the volume control 2.
● Press the TRAF button ?.
Priority for traffic announcements is ac-
tivated when the traffic-jam symbol lights
up on the display.
Note:
You can also adjust the tone and vol-
ume balance for traffic announcements.
Please see the “Tone and Volume Bal-
ance” section.
Note:
You will hear a warning tone,
● if you leave the reception area of a
traffic information station to which
you are currently tuned in;
● if you leave the reception area of a
traffic information station when you
are listening to a cassette/CD and
the subsequent automatic search
cannot locate a new traffic informa-
tion station;
● if you retune the radio from a traffic
information station to one that does
not broadcast traffic information.
Either deactivate the priority for traffic
information or switch to a station which
broadcasts traffic information.
43
CASSETTE MODE
Cassette Operation
Changing Direction of Play
To change between SIDEAand SIDE B
Cassette Play
● If there is no cassette in the device
● Press button 2
>.
Note:
● Press the
button 9.
● At the end of the tape, the direction
of play is automatically reversed
(auto-reverse).
The flip-release panel opens.
● Insert the cassette into the cassette
slot with the open side to the right.
Skipping Tracks (S-CPS)
To skip to the next or a later track
● Close the control unit.
“SDA SYNC” appears in the display.
● Press the button : one or more
The cassette starts playing with the side
that is facing upwards.
times.
“CPS FF” and the number of tracks to
be skipped appear in the display. The
tape fast forwards to the next track or
the chosen later track.
● If there is already a cassette in the
device
● Press the SRC button @ until
“CASSETTE” appears in the dis-
play.
To skip track backwards
● Press the button : one or more
The cassette is played in whichever di-
rection was last selected.
times.
“CPS FR” and the number of tracks to
be skipped appear in the display. The
tape is rewound to the start of the
present track or the desired earlier track.
Cassette Ejection
● Press the
button 9.
The flip-release panel opens and the
cassette is ejected.
Playing a Track Repeatedly
● Remove the cassette and close the
● Press button 4 RPT >.
“REPEATON” appears briefly in the dis-
release panel
or
play. RPT lights up in the display.
When the end of the track is reached,
the tape rewinds back to the beginning
of the track. Whilst the tape is rewind-
ing, “REPEAT TRACK” appears in the
display.
● Insert a new cassette.
To stop repeating the track,
● press button 4 (RPT) > again.
44
CASSETTE MODE
“REPEAT OFF” appears briefly in the
display.
Stopping fast winding
● Press the OK button ;.
Play continues.
Play continues as normal. RPT disap-
pears from the display.
Note:
Sampling All the Tracks on a
Cassette (SCAN)
● While the tape is being fast wound,
the last radio station tuned in can
be listened to. This requires the
“Radio monitor” function to be
switched on.
● Hold down the OK button ; for
longer than two seconds.
“SCAN” appears in the display. Sam-
ples from all the tracks on the tape are
played in ascending order.
Switching the Radio Monitor
On / off
To halt the scan
Note:
● Press the OK button ; a second
● The radiomonitor can only be set if
time.
a cassette is being played.
The track that is currently being sam-
pled will continue playing.
● Press the MENU button 8.
● Press the or button : until
“RAD MONITOR” appears in the
display.
Note:
● The duration of samples can be
adjusted. Refer to the section on
“Setting Sample Time” under “Ra-
dio Operation”.
● Press the or button : to
switch the radio monitor on or off
(“RM ON” or “RM OFF”).
● To use the S-CPS, RPT and SCAN
functions, there must be a pause of
at least three seconds between the
tracks on the cassette.
● Press the MENU button 8 or OK
;.
Pausing During Play
To interrupt tape play
● Press button 1 >.
Fast Winding
Fast forward
Play is interrupted and “PAUSE” ap-
pears in the display.
● Press the button :.
“CAS FORWARD” appears in the dis-
● Press button 1 > again to
play.
resume play.
Fast rewind
● Press the button :.
“CAS REWIND” appears in the display.
45
CASSETTE MODE
Skipping Blank Tape
Dolby* B Noise Reduction
You can automatically skip sections of You should switch on the Dolby func-
blank tape that last longer than 10 sec- tion whenever you play tapes recorded
onds. This requires the blank skip func- using the Dolby B process.
tion to be activated.
● Press button 6
>.
Note:
When the Dolby function is switched on,
shows in the display.
● The blank skip can only be set if a
cassette is being played.
*Noise reduction system manufactured un-
der licence from Dolby Laboratories. The
word Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Switching Blank Skip On / Off
● Press the MENU button 8.
● Press the or button : until
“BLANK SKIP” appears in the dis-
play.
Changing the display
To switch between the elapsed playing
time (ELP), remaining time (REM), tape
counter (CNT) and clock displays,
● Press the or button : to
switch the blank skip function on or
off.
● press the DIS/ button 7 once or
several times for longer than two
seconds until the required display
appears.
● Press the MENU button 8 or OK
; twice.
Selecting Tape Type
If you are playing a “Metal” or “CrO2”
tape, you should set the tape type se-
lector to “METAL ON”.
To select the tape type
● Press button 3 MTL >.
Either “METALON” or “METALOFF” will
appear briefly in the display.
46
CD CHANGER MODE
Changing the display
CD changer mode
● To alter the display between track
number and playing time or track
number and time or track number
and CD number or track number
and CD name, press the DIS /
7 button once or several times for
more than two seconds until the
desired elements appear on the
display.
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
accompanying your CD changer.
Starting CD changer mode
● Press the SRC button @ repeat-
edly until “CHANGER” appears on
the display.
Repeating individual tracks or
whole CDs (REPEAT)
Playback begins with the first CD the
CD changer recognises.
● To repeat the current track, press
the button 4 RPT > briefly.
Selecting a CD
“REPEATTRCK” appears briefly on the
display and RPT lights up.
● To change up or down to a different
CD, press the or button :
once or several times.
● To repeat play of the entire CD,
press the button 4 RPT > once
again.
Selecting a track
● To move up/down from one track to
another on the current CD,
press the or button : once or
several times.
“REPEAT DISC” appears briefly on the
display and RPT lights up.
Stopping REPEAT
● To stop the repeat function for the
current track or CD,
Fast search (audible)
For a fast search backwards or forwards
press the button 4 RPT > repeat-
edly until “REPEAT OFF” appears
briefly on the display and RPT
goes out.
● keep the
buttons : pressed
until the fast search backwards or
forwards begins.
Random play (MIX)
● To play the tracks on the current
CD in random order, press the but-
ton 5 MIX >.
“MIX CD” appears briefly on the display
and MIX lights up.
47
CD CHANGER MODE
● To play the tracks of all the inserted
CDs in random order, press the
button 5 MIX > once again.
Naming CDs
To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 99 CDs. The
names should have a maximum of sev-
en digits.
If you attempt to allocate more than 99
names, “FULL” will appear on the dis-
play.
“MIX ALL” appears briefly on the dis-
play and MIX lights up.
Stopping MIX
● Press the button 5 MIX > until
“MIX OFF” appears briefly on the
display and MIX goes out.
Entering/altering CD names
Scanning all tracks on all CDs
(SCAN)
● To listen in briefly to all the tracks
on all inserted CDs in ascending
order, hold down the OK button ;
for more than two seconds.
● Press the MENU button 8.
● Use the
buttons : to select
“CDC NAME”.
● Press the or button :.
The name of the CD appears on the
display.
“SCAN” appears on the display.
● Press the or button :.
Stopping SCAN
You are now in the edit mode. If the CD
you have selected is still unnamed, sev-
en underlines appear on the display.
● To stop scanning, press the OK
button ; briefly.
The track currently being scanned then
continues play.
The current input position flashes.
● Use the
buttons : to select
your characters. If a position is left
blank, you have selected the un-
derline.
Interrupting Play (PAUSE)
● Press the button 1 >.
“PAUSE” appears on the display.
● Use the or button : to pro-
ceed to your next input position.
Ending Pause
● Press the MENU button 8 or OK
; to save the name entered.
● Press the button 1 > during the
pause.
Play then resumes.
Clearing a CD name
● Listen to the CD whose name you
wish to clear.
● Press the MENU button 8.
48
CD CHANGER MODE
CLOCK - TIME
● Use the
buttons : to select
“CDC NAME”.
CLOCK - Time
Briefly displaying the time
● Press the or button :.
● Press the DIS /
7 button briefly
● Hold down the MENU button 8.
to display the time.
A beep sounds at the end of four
seconds and “DELETE NAME” ap- Setting the time
pears on the display.
The time can be set automatically us-
ing the RDS signal. If you are unable to
receive an RDS station or the station
you are listening to does not support this
function, it is also possible for you to set
the clock manually.
● Release the MENU button 8.
The CD name is now deleted.
● Press the OK button ; to return to
the menu.
Clearing all CD names
Setting the time automatically
All CD names saved are deleted.
● Listen to a CD.
● To set the time automatically, press
the MENU button 8.
● Press the button : repeatedly
until “CLK MANUAL” (manual) or
“CLK AUTO” (automatic) appears
on the display.
● Press the MENU button 8.
● Use the
buttons : to select
“CDC NAME”.
● Press the or button :.
● Press the button : until “CLK
AUTO” appears on the display.
● Hold down the MENU button 8.
A beep sounds at the end of four
seconds and “DELETE NAME” ap-
pears on the display.
● Press the MENU button 8 or OK
; once you have completed the
setting.
Continue to hold down the MENU
button 8 until a second beep
sounds and “DELETE ALL” ap-
pears on the display.
As soon as a station with the RDS time
function (RDS-CT) is received, the clock
is set automatically.
● Release the MENU button 8.
Setting the time manually
All CD names in the CD changer are
now deleted.
● To set the time manually, press the
MENU button 8.
● Press the OK button ; to return to
● Press the button : repeatedly
until “CLOCKSET” appears on the
display.
the menu.
● Press the button :.
49
TONE AND
CLOCK - TIME
VOLUME BALANCE
The time appears on the display. The
minutes flash and can now be set.
Tone and volume balance
You can alter the tone setting individu-
ally for each source (radio, cassette, CD
changer/Compact Drive MP3,AUX and
traffic announcements).
● Set the minutes using the
tons :.
but-
● Once the minutes have been set,
press the button :. The hours
now flash.
Note:
Adjustments to the sound setting for traf-
fic announcements can only be per-
formed during a traffic announcement.
● Set the hours using the
tons :.
but-
● Press the MENU button 8 or OK
; once you have completed the
setting.
Adjusting the bass
● Press the AUDIO = button.
“BASS” appears on the display.
Selecting the 12/24-hour clock
mode
● Press the or button : to set
the bass.
● Press the MENU button 8.
“MENU” appears on the display.
● Press the AUDIO button = or OK
; once you have completed the
setting.
● Press the button : repeatedly
until “24 H MODE” or “12 H MODE”
appears on the display.
Adjusting the treble
● Press the AUDIO = button.
“BASS” appears on the display.
● Press the
buttons : to switch
between the 12 and 24-hour mode.
● Press the button : repeatedly
until “TREBLE” appears on the dis-
play.
● Press the MENU button 8 or OK
; once you have completed the
setting.
● Press the or button : to set
the treble.
● Press the AUDIO button = or OK
; once you have completed the
setting.
50
TONE AND VOLUME BALANCE
Setting the X-BASS
Setting the volume distribution
front/rear (fader)
X-BASS means that the bass is raised
to a comfortable level at lower volume
levels. You can adjust the X-BASS func-
tion individually for all audio sources.
When X-BASS is activated, the X-BASS
symbol lights up on the display.
● To set the volume distribution front/
rear (fader), press the AUDIO =
button.
“BASS” appears on the display.
● Press the button : repeatedly
until “FADER” appears on the dis-
play.
● Press the AUDIO button =.
“BASS” appears on the display.
● Press the button : repeatedly
until “X-BASS” appears on the dis-
play.
● Press the or button : to set
the volume distribution front/rear.
● Press the AUDIO button = or OK
; once you have completed the
setting.
● Press the or button : to se-
lect X-BASS.
“XBASS 0” means that X-BASS is
switched off.
● After completing the setting, press
the AUDIO button = or OK ;.
Setting the volume distribution
left/right (balance)
● To set the volume distribution left/
right (balance), press the AUDIO
= button.
“BASS” appears on the display.
● Press the button : repeatedly
until “BALANCE” appears on the
display.
● Press the or button : to set
the volume distribution left/right.
● Press the AUDIO button = or OK
; once you have completed the
setting.
51
EQUALIZER
Equalizer
Notes on adjusting the equalizer
We recommend you use a CD you are
familiar with when adjusting the equal-
izer.
This car radio is fitted with three para-
metric digital equalizers, which can be
set individually. This means you have
the means to save and request differ-
ent equalizer settings for different situ-
ations (eg only driver, driver and front
passenger or vehicle occupants in front
and back).
“Parametric” means that for each of the
five filters, one frequency can be indi-
vidually raised or lowered (GAIN +8 to
-8). The following filters are available:
Before adjusting the equalizer, set the
tone and volume balance to zero. To do
this, please see the chapter “Tone and
volume balance”.
● Listen to the CD.
● Evaluate the tone impression ac-
cording to your taste.
● Now consult the chart “An aid to
adjusting the equalizer” in the
“Sound impression” section.
● SUB LOW EQ 32 - 50 Hz
● LOW EQ
● MID EQ
63 - 250 Hz
● Set the equalizer values as de-
scribed under “What to do”.
315 - 1250 Hz
● MID/HIGH EQ 1600 - 6300 Hz
● HIGH EQ 8000 - 12500 Hz
Switching the equalizer on/off
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
● To switch on the equalizer, hold
down the DEQ button < until EQ
lights up on the display “EQ ON” is
briefly displayed.
Presets for different musical styles (SND
PRESETS) can also be selected.
● To switch on the equalizer, hold
down the DEQ button < until EQ
disappears from the display “EQ
OFF” is briefly displayed.
52
EQUALIZER
Setting the equalizer
● Press the or button : repeat-
edly until “SND PRESETS” ap-
pears on the display.
● Press the DEQ button <.
● Select “DIGITAL EQ” using the
or button :.
● Select the desired musical style by
pressing the or button :.
● Select the equalizer “USER EQ1”,
“USER EQ2” or “USER EQ3”,
which you would like to set by
pressing the or the button :.
● Press the DEQ button < or OK
;.
Setting the level indicator
● Select the filter using the or
button :.
The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
● Press the or button :.
● To select the frequency, press the
or button :.
● Set the level using the or but-
ton :.
You can also set the type of spectro-
meter on your menu.
There are two types available.
● To select the next filter, first press
the OK button ;, then the or
button :.
Selecting a spectrometer type
● Press the MENU button 8.
“MENU” appears on the display.
● When all the settings have been
selected, press the DEQ button
<.
Selecting sound presets
Sound presets can also be selected for
the following music styles
● Press the button : repeatedly
until “EQ DISPLAY” appears on the
display.
● Press the or button :, to se-
lect between displaying “SPEC-
TRUM 1” and “SPECTRUM 2” or
“EQ DISP OFF”.
● CLASSIC
● POP
● JAZZ
● ROCK
● Press the MENU button 8 or OK
; once you have completed the
setting.
● TECHNO
● SPEECH
Settings for these musical styles have
already been programmed.
● Press the DEQ button <.
53
EQUALIZER
Setting aid for the equalizer
Commence settings at mid and treble section and complete them in the bass
section.
Sound impression/problem
What to do
Bass reproduction too weak
Raise bass with
frequency: 50 to 100 Hz,
level: +4 to +6
Impure bass
Booming
Disagreeable pressure
Reduce lower mid-section with
frequency: 125 to 400 Hz,
level: approx. -4
Sound very dominant,
aggressive, no stereo effect
Reduce mid-section with
frequency: 1,000 to 2,500 Hz,
level: -4 to -6
Muffled reproduction
Low transparency
No instrumental brilliance
Raise tweeter range with
frequency: approx. 12,600 Hz,
level: +2 up to +4
54
EXTERNAL AUDIO SOURCES
External audio sources
In addition to the CD changer, you can
also connect up a different external au-
dio source with a line output. Such
sources can be, for example, portable
CD players, minidisc players or MP3
players.
If there is no CD changer connected to
your unit, two external audio sources
can be hooked up.
The AUX output has to be switched on
in the install menu.
TMC
TMC for dynamic navigation
systems
TMC denotes “Traffic Message Chan-
nel”. Traffic announcements are trans-
mitted digitally via TMC and can there-
fore be used by suitable navigation sys-
tems for route planning. Your car radio
has one TMC output for connection to
Blaupunkt navigation systems. Your
Blaupunkt dealer will tell you which nav-
igation systems can be used with your
car radio.
To connect up an external audio source,
you will need an adapter cable, obtain-
able from any authorised Blaupunkt
dealer.
When a navigation system is connect-
ed and a TMC station received, “TMC”
lights up on the display.
When the dynamic navigation system
is activated, the radio automatically
tunes into a TMC station.
Switching the AUX input on/off
● Press the MENU button 8.
“MENU” appears on the display.
● Press the button : repeatedly
until “AUX-IN-1 OFF” or “AUX-IN-1
ON” appears on the display.
For the second AUX input, a “2” will be
displayed instead of a “1”. If a CD chang-
er is connected, only input “2” will be
available.
● Press the or button : to
switch AUX on or off.
● Press the MENU button 8 or OK
; once you have completed the
setting.
Note:
When the AUX input is switched on, it
can be selected using the SRC button
@.
55
TECHNICAL DATA
Technical data
Amplifier
Output power:
4 x 26 watts sine
in accordance
with DIN 45 324 at
14.4V,
4 x 50 watts max.
power
Tuner
Frequency ranges:
FM :
MW :
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
LW :
FM transmission range:
20 - 16 000 Hz
Cassette
Transmission range:
30 - 18 000 Hz
Pre-amp output
4 channels:
4 V
Input sensitivity:
AUX 1 input
: 2 V / 6 kΩ
AUX 2 input
: 775 mV / 10 kΩ
Tel/Navi reception: 10 V / 560 Ω
Subject to changes!
56
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0030 210 57 85 350 0030 210 57 69 473
(IRL) 01-4149400
01-4598830
02-369 6464
40 2085
(I)
02-369 6331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
10/03
CM/PSS 8 622 403 159
|