Black Decker Iron IRO110W User Manual

TAMPER-RESISTANT SCREW  
Product may vary slightly from what is illustrated.  
Care and Cleaning  
Warning: This appliance is equipped with a tamper-resistant screw  
to prevent removal of the outer cover. To reduce the risk of fire or  
electric shock, do not attempt to remove the outer cover. There are  
no user-serviceable parts inside. Repair should be done only by  
authorized service personnel.  
This product contains no user serviceable parts. Refer service to  
qualified service personnel.  
CLEANING  
USA/Canada 1-800-231-9786  
Accessories/Parts 1-800-738-0245  
1. Make sure iron is unplugged and has cooled completely. Wipe the  
soleplate and outer surfaces with a soft cloth dampened with water  
and mild household detergent. Never use abrasives, heavy-duty  
cleansers, vinegar or scouring pads that may scratch or discolor  
the iron.  
2. After cleaning, steam iron over an old cloth to remove any residue  
from the steam vents.  
STORING YOUR IRON  
1. Unplug the iron and let it cool completely.  
2. Check that the fabric select dial is set to  
3. Store iron on its heel rest.  
Note: If the power supply cord is damaged, it should be replaced  
by qualified personnel or in Latin America by an authorized service  
center.  
How to Use  
LIGHT ‘N EASY® AUTOMATIC SHUTOFF IRON  
This product is for household use only.  
GETTING STARTED  
• Remove any labels, stickers or tags attached to the body or  
soleplate of the iron.  
Note: Use ordinary tap water for ironing. Do not use water processed  
through a home softening system.  
Important: For optimum performance, let the iron stand for  
90 seconds before beginning to iron.  
Tip: If unsure of a garment’s fiber, test a small area (on an inside  
seam or hem) before ironing.  
.
1. Spray nozzle  
6. 360° pivoting cord  
7. Heel rest  
8. Fabric-select dial  
9. Water tank  
2. Water-fill opening  
3. Steam/Dry selector  
4. Spray button  
NEED HELP?  
For service, repair or any questions regarding your appliance, call  
the appropriate 800 number on cover of this book. Please DO NOT  
return the product to the place of purchase. Also, please DO NOT mail  
product back to manufacturer, nor bring it to a service center. You may  
also want to consult the website listed on the cover of this manual.  
TWO-YEAR LIMITED WARRANTY  
(Applies only in the United States and Canada)  
What does it cover?  
5. Power indicator light  
10. Soleplate  
FILLING WATER TANK  
1. Tilt the iron and using a clean measuring cup, pour water into  
opening until the water reaches the MAX level mark on the water  
tank. Do not overfill.  
2. Plug iron into electrical outlet.  
SPECIAL FEATURES  
MODEL IR0110W  
When using your iron for the first time, you may notice water  
residue inside the unit. This is normal.  
Any defect in material or workmanship provided; however,  
Applica’s liability will not exceed the purchase price of product.  
Automatic Shutoff in 3 Positions  
For how long?  
• Your iron will automatically turn off after 30 seconds of inactivity  
if left on its soleplate or on its side. If left vertically on its heel rest,  
it will turn off after 8 minutes.  
• Once you pick up the iron, the light will turn solid green again once  
the set temperature is reached. If the iron is not fully heated, a solid  
red light will appear; once the iron is ready, the light will turn solid  
green.  
• Two years from the date of original purchase with proof of such  
purchase.  
What will we do to help you?  
Burns can occur from touching hot metal parts, hot water  
or steam. Use caution when you turn a steam iron upside  
down or use the surge of steamthere may be hot water  
in the reservoir. Avoid rapid movement of iron to minimize  
hot water spillage.  
Please Read and Save this Use and Care Book.  
Provide you with a reasonably similar replacement product that is  
either new or factory refurbished.  
IMPORTANT SAFETY  
INSTRUCTIONS  
How do you get service?  
Save your receipt as proof of date of sale.  
call toll-free 1-800-231-9786, for general warranty service.  
Note: Wait for iron to reheat completely before resuming operation.  
IRONING WITH STEAM  
Steam is produced when you turn the fabric select dial between  
settings ●● and ●●●.  
1. Plug the iron into electrical outlet.  
2. Be sure there is water in the water tank.  
3. Turn the fabric select dial to appropriate setting for your fabric  
(between ●● and ●●●). Read garment’s label to help you  
determine fabric type.  
The iron must be used and rested on a stable surface.  
-
When placing the iron on its stand, ensure that the  
surface on which the stand is placed is stable.  
When using your iron, basic safety precautions should  
always be followed, including the following:  
If you need parts or accessories, please call 1-800-738-0245.  
-
The iron is not to be used if it has been dropped,  
if there are visible signs of damage or if it is  
leaking.  
READ ALL INSTRUCTIONS BEFORE USING.  
Use iron only for its intended use.  
What does your warranty not cover?  
Damage from commercial use  
Damage from misuse, abuse or neglect  
Products that have been modified in any way  
Products used or serviced outside the country of purchase  
Glass parts and other accessory items that are packed with the  
unit  
Shipping and handling costs associated with the replacement of  
the unit  
Consequential or incidental damages (Please note, however,  
that some states do not allow the exclusion or limitation of  
consequential or incidental damages, so this limitation may not  
apply to you.)  
To protect against a risk of electric shock, do not immerse  
the iron in water or other liquids.  
SPECIAL INSTRUCTIONS  
The iron should always be turned to the minimum (min)  
setting before plugging or unplugging from outlet. Never  
yank cord to disconnect from the outlet; instead grasp  
plug and pull to disconnect.  
Do not allow cord to touch hot surfaces. Let iron cool  
completely before putting away. Loop cord loosely around  
iron when storing.  
4. Set the steam/dry selector to desired steam setting.  
To avoid a circuit overload, do not operate another high-  
5. When finished ironing, turn the steam/dry selector to  
unplug the iron.  
and  
wattage appliance on the same circuit.  
If an extension cord is absolutely necessary, a cord rate  
at 15-ampere cord should be used. Cords rated for less  
amperage may overheat. Care should be taken to arrange  
the cord so that it cannot be pulled or tripped over.  
Important: Always stand the iron on its heel rest when powered on  
or not in use.  
SPRAY  
1. Be sure the iron is filled with water.  
2. On first use, pump the spray button several times.  
DRY IRONING  
Always disconnect iron from electrical outlet when filling  
How does state law relate to this warranty?  
with water or emptying, and when not in use.  
SAVE THESE INSTRUCTIONS.  
This warranty gives you specific legal rights. You may also have  
other rights that vary from state to state or province to province.  
1. Turn the steam/dry selector to  
.
Do not operate iron with a damaged cord, or if the iron  
has been dropped or damaged. To avoid the risk of  
electric shock, do not disassemble the iron; take it to a  
qualified service person for examination and repair, or  
call the appropriate toll-free number on the cover of this  
manual. Incorrect reassembly can cause a risk of electric  
shock when the iron is used.  
Close supervision is necessary for any appliance being  
used by or near children. Do not leave iron unattended  
while connected or on an ironing board.  
This product is for household use only.  
2. Turn the fabric select dial to appropriate setting for your fabric.  
3. Power indicator light comes on.  
4. When finished ironing, make sure to unplug the iron.  
Important: Always stand the iron on its heel rest when powered on  
or not in use.  
POLARIZED PLUG  
This appliance has a polarized plug (one blade is wider than the other).  
To reduce the risk of electric shock, this plug is intended to fit into a  
polarized outlet only one way. If the plug does not fit fully into the outlet,  
reverse the plug. If it still does not fit, contact a qualified electrician.  
Do not attempt to modify the plug in any way.  
is a registered trademark of The Black & Decker  
Corporation, Towson, Maryland, USA  
Made and Printed in People’s Republic of China  
© 2011 Applica Consumer Products, Inc.  
2011/5-11-50E/S  
 

Belkin Network Router F5D6231 4 User Manual
Belkin Switch FSU234ea User Manual
Black Decker Power Screwdriver 1VPX User Manual
Blaupunkt Car Stereo System Sevilla CD51 User Manual
Braun Blender MR 500 CA User Manual
Braun Coffeemaker KF 177 User Manual
Califone Microphone PAMR 115 User Manual
Channel Plus Home Theater Server 2010 User Manual
Chevrolet Automobile 50061011 User Manual
Chrysler Automobile 200 User Manual