American Standard Indoor Furnishings 0554700 User Manual

WILLIAMSBURG™  
COUNTERTOP SINK  
VITREOUS CHINA  
BARRIER FREE  
WILLIAMSBURG COUNTERTOP SINK  
• Vitreous china  
• Self-rimming  
• Front overflow  
• Supplied with cutout template  
• Faucet ledge (faucet not included)  
0558.700 Faucet holes on 8” (203mm) centers  
0554.700 Faucet holes on 4” (102mm) centers  
(illustrated)  
Nominal Dimensions:  
24-1/2" x 18" (622 x 457mm)  
Bowl sizes:  
17" (432mm) wide,  
10-1/2" (267mm) front to back,  
5-1/2" (140mm) deep  
FINISHED WALL  
OR SPLASHBACK  
610mm  
(24)  
70mm  
(2-3/4)  
Compliance Certifications -  
Meets or Exceeds the Following  
Specifications:  
102mm  
(4)  
OPTIONAL  
67mm  
(2-5/8)  
183mm  
(7-3/16)  
• ASME A112.19.2M for Vitreous China  
Fixtures  
203mm  
(8)  
MIN.  
457mm  
(18)  
C/L  
857mm  
(33-1/4)  
686mm  
(27)  
MIN.  
616mm  
(24-1/4)  
152mm  
(6)  
MAX.  
SEALING  
COMPOUND  
19mm  
(3/4)  
COUNTER (BY OTHERS)  
BARRIER FREE  
CLEARANCE  
229mm  
(9)  
To Be Specified  
178mm  
(7)  
MIN.  
*
248mm  
(9-3/4)  
Color:  
*343mm  
203mm  
(8)  
Faucet*:  
SUPPLIES  
AS REQ'D  
(13-1/2)  
178mm  
(7)  
Faucet Finish:  
Supplies:  
1-1/4" Trap:  
1-1/4 O.D.  
WASTE  
787mm (31)  
857mm (33-1/4)  
FINISHED FLOOR  
1-1/4 O.D  
TAILPIECE  
NOTES:  
* See faucet section for additional models available  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.  
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED  
WITH SINK.  
*
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances  
established by ANSI Standard A112.19.2.  
These measurements are subject to change or cancellation. No responsibility is assumed for use of  
superseded or voided pages.  
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES  
AND ANSI A117.1 ACCESSIBLE AND USEABLE  
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.  
Install lavatory 864mm (34") from finished floor.  
Lavatory installed 70mm (2-3/4") minimum from front edge  
of countertop provides 686mm (27") knee clearance  
area.  
© 2003 American Standard Inc.  
 

Abocom Network Router PL1000 User Manual
Addonics Technologies Network Card CRTM4HES User Manual
ADTRAN Network Card 3010 NTU 8 User Manual
Aero Mist Humidifier 60100K User Manual
Agilent Technologies Oven E1441A User Manual
AG Neovo Universal Remote TSC 34 U L User Manual
AKG Acoustics Microphone D7 User Manual
Alamo Lawn Mower 02986950P User Manual
Atmel Computer Hardware 8 16 bit High Performance Low Power Flash Microcontrollers User Manual
Axis Communications Security Camera M3203 User Manual