Acu Rite Clock Radio 00943 00944 00945 User Manual

Instruction Manual  
Digital Kitchen Scale  
models 00943 / 00944 / 00945  
CONTENTS  
Package Contents .................. 2  
Customer Support.................. 2  
Features & Benefits................. 3  
Setup .................................... 4  
Install or Replace Battery........ 4  
Set the Measurement Units ..... 4  
Using the Scale...................... 5  
Troubleshooting ..................... 7  
Care & Maintenance.............. 7  
Specifications......................... 7  
Questions? Contact Customer Support at  
(877) 221-1252 or visit www.AcuRite.com.  
SAVE THIS MANUAL FOR FUTURE REFERENCE.  
 
Features & Benefits  
1 2  
3
FRONT  
FRONT  
1. Weighing Area  
2. Display  
3. MODE Button  
4. ZERO & ON/OFF  
Button  
5
6
BACK  
4
5. Integrated Hang  
Hole  
BACK  
for wall mount storage.  
6. Battery  
Compartment  
7
7. Unit Conversion  
Button  
WEIGHT MODE  
WEIGHT MODE  
8
9
10  
11  
8. Tare Indicator  
9. Minus Indicator  
Indicates weight of  
item(s) removed from  
the scale.  
10. Current Weight  
11. Weight Units  
12. Zero Indicator  
13. Weight Mode  
Indicator  
12  
13  
14  
15  
14. Milk Mode  
Indicator  
15. Water Mode  
Indicator  
3
 
SETUP  
Install or Replace Battery  
1. Remove the battery compartment cover.  
2. Insert 1 x 3V CR2032 lithium battery into the battery compartment, as  
shown. Follow the polarity (+/-) diagram in the battery compartment.  
3. Replace the battery cover.  
Remove  
Battery Cover  
1
CR2032  
+
Install Battery  
2
1 x 3V CR2032  
lithium battery  
Set the Measurement Units  
When you are in Weight Mode, press the Unit Conversion button, located on  
the back of the scale, to toggle between kg/g and lb/oz.  
4
 
OPERATION  
Using the Scale  
Measure Weight  
The scale's default mode is set to weigh solid items. Volume Mode, used  
for weighing liquids, allows you to choose between WATER or MILK modes  
because milk is denser than water.  
Weight Mode  
1.Place the scale on a flat, stable surface.  
2.Press ZERO/ON/OFF button to turn scale on.  
3.Wait for the display to show 0 weight.  
4.Make sure scale is in Weight Mode. If not, use MODE button to select  
Weight Mode. (show MODE button and MODE indicators)  
5.Place item(s) to be weighed onto the surface of the scale.  
6.Weight will be shown on the display.  
Volume Mode  
1.Place the scale on a flat, stable surface.  
2.Press ZERO/ON/OFF button to turn scale on.  
3.Wait for the display to show 0 weight, then press the MODE button until  
MODE indicator is on for Milk or Water.  
4.Place a container on the scale.  
5.Press ZERO/ON/OFF button to reset display to 0.  
6.Pour liquid into the container. Display will show liquid volume.  
7. To view the weight of the liquid, press MODE button until Weight Mode  
indicator is on.  
Zero & Tare Functions  
To measure items as they are added, use the Zero and Tare Functions. If the  
weight of the items being measured is below 4% of the scale’s capacity (less  
than 0.2kg/0.4lb), the Zero function is used. If the weight of the items exceeds  
4% of the scale’s capacity, the Tare function is used.  
1.Place the first item(s) within the center of the Weighing Area of the scale  
to take a measurement.  
2.Without removing the item(s), press the ZERO/ON/OFF button to reset  
the display to 0.  
3.Depending on the weight of the item(s), you will see the Zero indicator  
"O" or the Tare indicator "T" on the display.  
4.With the first item(s) still in place, add the next item to the surface of the  
scale. The display will now show the weight of that item.  
5
 
5.Press ZERO/MODE to see the combined weight of the two items.  
6.Press ZERO/MODE again to reset the display to 0.  
7. Repeat these steps until all items have been added.  
Note: Adhere to the maximum weight capacity of the scale.  
Minus Function  
If you add multiple items to the scale at one time to get a total weight, you can  
identify the value of a single item or ingredient by using the Minus Function:  
1.Add item(s) to the scale; display shows total weight.  
2.Press ZERO/ON/OFF to reset display to 0.  
3.Remove an item.  
4.Display shows the weight of the removed item with the Minus Function  
indicator (negative value is shown on the display).  
5.Remove both items to see the combined weight of the two items.  
6.Repeat steps as needed.  
Warning Messages  
Replace battery (see page 4).  
Maximum capacity has been exceeded. Remove  
items to prevent damage.  
Power the Unit ON/OFF  
The scale will automatically power off when the display shows 0 or the same  
weight for 2 minutes. Press ZERO/ON/OFF to power the scale on. To power  
off manually, press ZERO/ON/OFF when the LCD is showing 0, or press and  
hold ZERO/ON/OFF for 3 seconds if a weight is shown on the display.  
Storage  
The scale can stored on a level surface or can be hung by using the integrated  
hang hole.  
6
 
Troubleshooting  
Problem  
Possible Solution  
Display screen  
not working  
• Check that the batteries are installed correctly.  
Batteries may need to be replaced.  
If your AcuRite product does not operate properly after trying  
(877) 221-1252 for assistance.  
Care & Maintenance  
Store in a dry location at room temperature. Clean with a soft, damp cloth.  
DO NOT immerse in water or use caustic cleaners or abrasives. All parts  
should be wiped clean immediately after direct contact with foods. Avoid  
contact with acids and citrus juices. Use the scale on a hard, flat surface. DO  
NOT strike, shake or drop the scale. Scale is not designed for commercial use.  
Specifications  
MAX WEIGHT CAPACITY  
5kg / 11lbs  
POWER  
3V CR2032 lithium battery  
7
 
Weather  
Stations  
Temperature  
& Humidity  
Weather  
Alert Radio  
Kitchen  
Thermometers  
& Timers  
Clocks  
It’s more than accurate, it’s  
AcuRite offers an extensive assortment of precision instruments,  
designed to provide you with information you can depend on to  
Plan your day with confidence.  
www.AcuRite.com  
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark  
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and  
copyrights are the property of their respective owners. AcuRite uses patented  
Printed in China  
00943 INST 061813  
 

Adagio Teas Electronic Keyboard PDP100 User Manual
Agilent Technologies Network Card 85225F User Manual
Alliance Laundry Systems Washer HC25SN SC80SN User Manual
AOC Flat Panel Television L32W781B User Manual
Audiovox Car Stereo System Car Stereo System User Manual
Avenview TV Converter Box C COMPVGA HDMI User Manual
Avocent Switch 590 222 501M User Manual
Axis Communications Security Camera P3301 User Manual
Baracoda Barcode Reader V3362 User Manual
Behringer Musical Instrument Amplifier HA400 User Manual