Curtis CD156 User Manual

CD STEREO PORTABLE PLAYER  
MODEL: CD156  
INSTRUCTION MANUAL  
Please read instructions carefully before use and retain for future reference.  
POWER SOURCES  
Using Battery  
1. Open the lid of the battery compartment.  
2. Insert 2 "AA" Size (UM-3) alkaline batteries by matching the (+ and -) to the diagram  
inside the battery compartment and close the lid. (batteries are not included)  
Note: For battery operation the AC power adaptor must be disconnected from DC IN  
Jack. (adaptor is not included)  
When to Change the Battery  
When the battery is used up, "  
" indicator flashes in the display. Replace all the  
batteries with new alkaline batteries.  
Note: Do not mix new batteries with old one.  
Do not use different types of batteries together.  
Using an AC Power Adapter (Not included)  
1. Insert the adapter plug into the DC input jack on the unit.  
2. Plug the adapter into the AC wall outlet.  
3. Unplug from wall outlet when not in use.  
Note: Use only a 4.5V DC , 500 mAAdapter.  
PLAYING A CD  
This CD player is designed to play the 8cm and 12cm CD's compact disc without using  
adaptor.  
Getting Start  
1. Insert the headphone/earphone plug to PHONE JACK.  
2. Press the OPEN button, and then the door open, put a disc into the CD  
compartment with label side upward.  
3. Push the disc gently around the centre area until it clicks so that the disc fits into the  
pivot.  
4. Close the door and press the PLAY/PAUSE button once.  
5. The Display will show the total number of tracks of the disc, then begin to play the  
first track.  
6. Adjust the Volume control.  
2
General Operation  
Play/Pause Button f  
- Press once to start playback in the original order.  
Press again to stop the disc play temporarily.  
- Press once to stop playback.  
Stop Button  
Press again to turn off power.  
Skip / Search Button ꢁꢂ  
- Press once to skip to next track or back to  
previous track.  
Press continuously to search forward or  
backward .  
Automatic Turn off (Auto Power Off)  
If the player in STOP mode for 30 seconds, it will turn off automatically.  
Various Playing Modes  
MODE Button - There are 3 kinds of function:  
A. Repeat Play  
During PLAY mode  
-
-
Press the MODE button once to play single track repeatedly.  
The repeat indicator " REPEAT 1 " will appear in display.  
During PLAY mode  
-
-
Press the MODE button twice to play the entire disc repeatedly.  
The repeat indicator " REPEAT ALL " will appear in the display.  
NOTE - To cancel REPEAT simply press the MODE button until the repeat indicator  
disappears.  
B. Intro Scan  
In STOP mode  
-
-
-
Press the MODE button three times.  
The INTRO indicator will appear in the display.  
Press the PLAY button to play the first 10 seconds of each track on the disc.  
NOTE - To cancel INTRO SCAN simply press the MODE button until the INTRO  
indicator disappears.  
C. Random Play  
In STOP mode  
-
-
Press the MODE button four times.  
The RANDOM indicator will appear in the display.  
3
-
Press the PLAY button, all the tracks on a disc to be played in a random sequence.  
NOTE - To cancel RANDOM PLAY simply press MODE button one time until the  
RONDOM indicator disappears.  
Program Play  
1. During stop, press PROG button until " PROG " and track number flashes in Display.  
2. Press or SKIP/SEARCH button to choose a track.  
3. Press PROG button to program the track, up to 20 tracks can be programmed into  
memory.  
4. Repeat steps 2 and 3 to program tracks to start the program payback.  
5. Press fPLAY/PAUSE button.  
6. To erase the program, simply press the STOP button to turn the power off.  
MAINTENANCE  
Cleaning the Lens  
If the lens becomes dusty, clean it with camera lens blower. Be careful not to scratch the  
surface of the lens.  
Cleaning the Cabinet  
From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains,  
slightly moisten the cloth with water or a mild detergent solution. Never use benzene,  
alcohol or other solvents as they may damage the finish of the cabinet.  
Battery Safety  
1. Install batteries correctly observing the (+/-) polarity signs.  
2. Use only the recommended battery type or equivalent (voltage and size).  
3. Always replace a complete set of batteries at the same time.  
4. Do not mix batteries of different types.  
5. Never mix new and used batteries in the same compartment.  
6. Remove exhausted batteries immediately.  
7. Remove batteries when product is not in use.  
8. Do not dispose of batteries in fire as they may explode.  
9. Do not recharge non-rechargeable batteries.  
10. Rechargeable batteries are to be removed from the item before being charged.  
11. Rechargeable batteries are only to be charged under adult supervision.  
12. Do not short circuit the supply terminals.  
13. Ensure batteries are stored away from metal objects as contact may cause a short  
circuit.  
4
GENERAL INFORMATION  
Troubleshooting Guide  
SYMPTOM  
CAUSE  
SOLUTION  
CD Player will not  
turn on  
- Dead or weak batteries  
- AC adaptor not connected  
properly  
- Replace batteries  
- Check AC adaptor  
connection  
- Reinsert disc with label  
side facing up  
Disc will not play  
- Disc inserted incorrectly  
No sound from  
earphones  
- Earphone plug not inserted  
properly  
- Volume control set to minimum  
- Weak batteries  
- Reinsert earphone cord  
into Earphone jack  
- Increase the volume  
- Replace with fresh  
batteries, or use AC  
power  
- Defective compact disc  
- The compact disc or pickup  
lens is dirty  
- Try another compact disc  
- Clean or replace the  
compact disc or clean the  
pickup lens  
Sound is skipping  
- Strong vibrations  
- Place the CD player on a  
level surface that is stable  
(no vibrations)  
5

Nokia 3G 0800 015 0286 User Manual
Motorola 68014406001 A User Manual
Meridian America 800 Version 4 User Manual
Kenwood C471FM User Manual
Hitachi Travelstar HTS541060G9SA00 User Manual
GPX ci3807b User Manual
Emerson CCM901 User Manual
Curtis KCR2613A User Manual
Casio DQ 542 User Manual
Aiwa CX NA71 User Manual